5 Quick Fixes

Image

PROJECT: RED EYE REDUCTION

Image

PROJECT: CORRECTING IMAGE DISTORTION

Image

PROJECT: PANORAMA FROM MULTIPLE IMAGES

Sometimes just one or two clicks in Photoshop can turn an image from so-so (or worse) to awesome. Quick fixes get you the results you want without a lot of fuss.

Lesson overview

In this lesson, you’ll learn how to do the following:

  • Remove red eye.

  • Brighten an image.

  • Adjust the features of a face.

  • Combine images to create a panorama.

  • Crop and straighten an image and fill in any resulting empty areas.

  • Blur the background of an image using Iris Blur.

  • Merge two images to extend depth of field.

  • Apply optical lens correction to a distorted image.

  • Remove an object and seamlessly fill the empty space.

  • Adjust the perspective of an image to match another image.

Image

This lesson will take about an hour to complete. Please log in to your account on peachpit.com to download the lesson files for this chapter, or go to the Getting Started section at the beginning of this book and follow the instructions under “Accessing the Lesson Files and Web Edition.”

As you work on this lesson, you’ll preserve the start files. If you need to restore the start files, download them from your Account page.

Getting started

Not every image requires a complicated makeover using advanced features in Photoshop. In fact, once you’re familiar with Photoshop, you can often improve an image quickly. The trick is to know what’s possible and how to find what you need.

In this lesson, you’ll make quick fixes to several images using a variety of tools and techniques. You can use these techniques individually, or team them up when you’re working with an image that needs just a little more help.

  1. Start Photoshop, and then immediately hold down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac) to restore the default preferences. (See “Restoring Default Preferences” on page 5.)

  2. When prompted, click Yes to delete the Adobe Photoshop Settings file.

Improving a snapshot

If you’re sharing a snapshot with family and friends, you may not need it to look professional. But you probably don’t want glowing eyes, and it would be good if the picture isn’t too dark to show important detail. Photoshop gives you the tools to make quick changes to a snapshot.

Correcting red eye

Red eye occurs when the retina of a subject’s eye is reflected by the camera flash. It commonly occurs in photographs taken in a dark room, because the subject’s irises are wide open. Fortunately, red eye is easy to fix in Photoshop. In this exercise, you will remove the red eye from the woman’s eyes in the portrait.


Image Note

If you haven’t installed Bridge, you’ll be prompted to do so when you choose Browse In Bridge. For more information, see page 3.


You’ll start by viewing the before and after images in Adobe Bridge.

  1. Choose File > Browse In Bridge to open Adobe Bridge.

  2. In the Favorites panel in Bridge, click the Lessons folder. Then, in the Content panel, double-click the Lesson05 folder to open it.


    Image Note

    If Bridge asks you if you want to import preferences from a previous version of Bridge, click No.


  3. Adjust the thumbnail slider, if necessary, so that you can see the thumbnail previews clearly. Then look at the RedEye_Start.jpg and RedEye_End.psd files.

Image

Not only does red eye make an ordinary person or animal appear unusual, but it can distract from the subject of the image. It’s easy to correct red eye in Photoshop, and you’ll quickly lighten this image too.

  1. Double-click the RedEye_Start.jpg file to open it in Photoshop.

  2. Choose File > Save As, choose Photoshop for the Format, name the file RedEye_Working.psd, and click Save.

  3. Select the Zoom tool (Image), and then drag to zoom in to see the woman’s eyes. If Scrubby Zoom isn’t selected, drag a marquee around the eyes to zoom in.

  4. Select the Red Eye tool (Image), hidden under the Spot Healing Brush tool (Image).

  5. In the options bar, reduce the Pupil Size to 23% and the Darken Amount to 62%.

The Darken Amount specifies how dark the pupil should be.

  1. Click the pupil in the woman’s left eye. The red reflection disappears.

  2. Click the pupil in the woman’s right eye to remove the red reflection there, too.

    Image

If the red reflection is directly over the pupil, clicking the pupil removes it. However, if the red reflection is slightly off the pupil, try clicking the highlight in the eye first. You may need to try a few different spots, but it’s easy to undo and try again.

  1. Choose View > Fit On Screen to see the entire image.

    Image
  2. Choose File > Save.

Brightening an image

The woman’s eyes no longer glow red, but the overall image is a bit dark. You can brighten an image in several different ways, as you’ve already seen. You can try adding adjustment layers for Brightness/Contrast, Levels, and Curves, depending on the degree of adjustment you want to make. For a quick fix or a good starting point, try the Auto button or the presets, which are available in both the Levels and Curves adjustments. Let’s try a Curves adjustment layer for this image.

  1. Click Curves in the Adjustments panel.

  2. Click Auto to apply an automatic correction. The image brightens.

    Image
  3. Choose Lighter from the Preset menu. The curve changes slightly. The difference between the two curves is that a preset applies the same curve to every image, while Auto customizes the curve after analyzing an individual image.

    Image
  4. Click the Reset to Adjustment Defaults button (Image) at the bottom of the Properties panel to revert back to the unadjusted image.

  5. Select the on-image adjustment tool (Image) in the Curves panel, and then click the center of the forehead and drag upwards. That brightens the image nicely, and also improves the contrast.


    Image Tip

    If you want to use the Auto button or the white point or black point samplers (eyedropper icons) in the Curves or Levels adjustments, use them before applying manual adjustments. Like presets, adjustments by those tools replace manual adjustments.


    Image
  6. Choose Layer > Flatten Image.


    Image Tip

    To see how much you’ve brightened the image, hide the Curves layer, and then show it again.


  7. Save the file.

Adjusting facial features with Liquify

The Liquify filter is useful when you want to distort only part of an image. It includes Face-Aware Liquify options that can automatically recognize faces in images, and then lets you easily adjust facial features such as the eyes, nose, and mouth. For example, you can adjust the size of or distance between the eyes. Being able to adjust facial features can be useful for photos used in advertising and fashion, when portraying a certain look or expression may be more important than faithfully representing a specific person.

  1. With RedEye_Working.psd still open, choose Filter > Liquify.

  2. In the Properties panel, expand the Face-Aware Liquify options.

    Image

    Image Tip

    When the Face tool (Image) is selected in the Liquify toolbar, handles appear as you hover the pointer over different parts of the face. You can drag those handles to adjust different parts of the face directly, as an alternative to dragging the Face-Aware Liquify sliders.


  3. Make sure the Eyes section is expanded and that the link icon is selected for both Eye Size and Eye Height; then enter 32 for Eye Size and 10 for Eye Height.

When the link icon is not selected for an Eyes option, you can set different values for the left and right eyes.

  1. Make sure the Mouth section is expanded, and then enter 5 for Smile and 9 for Mouth Height.

  2. Make sure the Face Shape section is expanded, and then enter 40 for Jawline and 50 for Face Width.

  3. Deselect and reselect the Preview option to compare the image before and after your changes.

    Image

Image Tip

The Face-Aware Liquify options have a limited range because they’re designed for subtle, believable distortions. If you want to exaggerate faces into caricatures or extreme expressions, you may want to use the more advanced manual tools along the left side of the Liquify dialog box.


Feel free to experiment with any of the Face-Aware Liquify options to get a better sense of the possibilities for quick, easy alterations.

  1. Click OK to exit Liquify. Close the document and save your changes.

The Face-Aware Liquify features are available only when Photoshop recognizes a face in an image. It may not recognize a face that is turned too far away from the camera or when a face is partially covered by hair, sunglasses, or a hat shadow.

Blurring a background

The interactive blurs in the Blur Gallery let you customize a blur as you preview it on your image. You’ll use an iris blur to blur the background in an image, focusing the viewer’s attention on the main attraction—in this case, the egret. You’ll apply the blur as a Smart Filter so that you can modify it later if you want to.

You’ll start by looking at the start and end files in Bridge.

  1. Choose File > Browse In Bridge to open Adobe Bridge.

  2. In the Favorites panel in Bridge, click the Lessons folder. Then, in the Content panel, double-click the Lesson05 folder to open it.

  3. Compare the Egret_Start.jpg and Egret_End.psd thumbnail previews.

    Image

In the final image, the egret appears sharper, as its reflection and the grass around it have been blurred. Iris Blur, one of the interactive blurs in the Blur Gallery, makes the task an easy one—no masking required.

  1. Choose File > Return To Adobe Photoshop, and choose File > Open As Smart Object.

  2. Select the Egret_Start.jpg file in the Lesson05 folder, and click OK or Open.

    Image

Photoshop opens the image. There is one layer in the Layers panel, and it’s a Smart Object, as indicated by the badge on the layer thumbnail icon.

  1. Choose File > Save As, choose Photoshop for the Format, name the file Egret_Working.psd, and click Save. Click OK in the Photoshop Format Options dialog box.

  2. Choose Filter > Blur Gallery > Iris Blur.


Image Tip

If you have an iPhone camera that produces an HEIF depth map, such as an iPhone Plus or iPhone X, you can create a more realistic background blur effect by loading the depth map into the Lens Blur filter (Filter > Blur > Lens Blur).


A blur ellipse is centered on your image. You can adjust the location and scope of the blur by moving the center pin, feather handles, and ellipse handles. At the top right corner of the Blur Gallery task space, you also see the expandable Field Blur, Tilt-Shift Blur, Path Blur, and Spin Blur panels.

  1. Drag the center pin so that it’s at the bottom of the bird’s body.

  2. Click the ellipse, and drag inward to tighten the focus around the bird.

    Image

    A. Center B. Ellipse C. Feather handle D. Blur

  3. Press Alt (Windows) or Option (Mac) as you click and drag the feather handles to match those in the first image below. Pressing Alt or Option lets you drag each handle separately.

  4. Click and drag on the Blur ring to reduce the amount of blur to 5 px, creating a gradual but noticeable blur. You can also change the same value by moving the Blur slider in the Iris Blur area of the Blur Tools panel.

    Image
  5. Click OK in the options bar to apply the blur.

The blur may be a little too subtle. You’ll edit the blur to increase it slightly.

  1. Double-click the Blur Gallery in the Egret layer in the Layers panel to open it again. Adjust the blur to 6 px, and click OK in the options bar to apply it.

The egret is accentuated by blurring the rest of the image. Because you applied the filter to a Smart Object, you can hide or edit the effect without altering the original image.

  1. Save the file, and then close it.

Creating a panorama

Sometimes a vista is just too large for a single shot. Photoshop makes it easy to combine multiple images into a panorama so that your viewers can get the full effect.

Once again, you’ll take a look at the end file first, to see where you’re going.

  1. Choose File > Browse In Bridge.

  2. Navigate to the Lesson05 folder, if you’re not there already. Then, look at the Skyline_End.psd thumbnail preview.


Image Tip

In Bridge, you can preview a selected image in full screen mode by pressing the spacebar. This is useful for previewing detailed or large images such as a panorama. Press the spacebar again to close the preview.


Image

Skyline_End.psd

You’ll combine four shots of the Seattle skyline into a single wide panorama image so that viewers get a sense of the whole scene. Creating a panorama from multiple images requires only a few clicks. Photoshop does the rest.

  1. Return to Photoshop.


    Image Tip

    You can also open selected images from Bridge directly into Photomerge by choosing Tools > Photoshop > Photomerge.


  2. With no files open in Photoshop, choose File > Automate > Photomerge.

  3. In the Source Files area, click Browse, and navigate to the Lesson05/Files For Panorama folder.

  4. Shift-select all the images in the folder, and click OK or Open.

  5. In the Layout area of the Photomerge dialog box, select Perspective.

The best option for merging photos isn’t always Perspective; it depends on how the originals were photographed. If you’re not completely happy with the result of a particular merge, you can always try again with a different Layout option. If you’re not sure which one to use, you can simply click Auto.

  1. At the bottom of the Photomerge dialog box, select Blend Images Together, Vignette Removal, Geometric Distortion Correction, and Content Aware Fill Transparent Areas. Then click OK.

Image

Blend Images Together blends images based on the optimal borders between them, instead of just creating a simple rectangular blend. Vignette Removal performs exposure compensation in images with darkened edges. Geometric Distortion Correction compensates for barrel, pincushion, or fisheye distortion. Content Aware Fill Transparent Areas automatically patches the empty areas between the merged image edges and the sides of the canvas.


Image Note

Photomerge will require more time when you merge more images, or images with large pixel dimensions. Photomerge works faster on computers that are newer or that have more RAM.


Photoshop creates the panorama image. It’s a complex process, so you may have to wait a few moments while Photoshop works. When it’s finished, you’ll see the full vista in the image window with five layers in the Layers panel. The bottom four layers are the original four images you selected. Photoshop identified the overlapping areas of the images and matched them, correcting any angular discrepancies. The top layer, containing “(merged)” in the layer name, is a single panorama image blended from all of the images you selected, combined with formerly empty areas filled in by Content Aware Fill. Those areas are indicated by the selection.

Image

Image Tip

If you want to see how the panorama looks without the areas created by Content Aware Fill, hide the top layer.


  1. Choose Select > Deselect.

  2. Choose Layer > Flatten Image.

    Image
  3. Choose File > Save As. Choose Photoshop for the Format, and name the file Skyline_Working.psd. Save the file in the Lesson05 folder. Click Save.

The panorama looks great, but it’s a little dark. You’ll add a Levels adjustment layer to brighten it a little bit.

  1. Click the Levels icon in the Adjustments panel to add a Levels adjustment layer.

  2. Select the White Point eyedropper in the Properties panel, and then click on a white area of the clouds.

    Image

The sky gets bluer, and the entire image brightens.

  1. Save your work. Click OK in the Photoshop Format Options dialog box.

It’s that easy to create a panorama!


Image Note

In this case, the Photoshop Format Options alert may appear because a layer was added. The Photoshop Format Options dialog box usually won’t appear for Photoshop documents containing only a Background layer.


Filling empty areas when cropping

The panorama image looks great except for two things: The horizon is slightly tilted, and the lower handrail is incomplete where the rocks on the right descend into the water. If you were to rotate the image, empty areas might appear at the corners, requiring a tighter crop and losing parts of the image. Fortunately, the same Content-Aware technology that filled in empty areas resulting from the panorama merge can also fill in empty areas that can result from straightening and cropping.

  1. Make sure Skyline_Working.psd is open, and make sure the Background layer is selected in the Layers panel.

  2. Choose Layer > Flatten Image.

  3. In the Tools panel, select the Crop tool. The crop rectangle and its handles appear around the image.

    Image
  4. In the options bar, select the Straighten button (Image), and make sure Content-Aware is selected.

    Image
  5. Position the Straighten pointer on the horizon at the left edge of the image, and drag to the right to create a Straighten line that’s aligned with the horizon; release the mouse button when you reach the end of the horizon at the right edge of the image.

    Image

Notice there is now white space that needs to be filled near the corners.

Image
  1. With the crop rectangle still active, drag the image down until the incomplete part of the lower guardrail is outside the crop rectangle.

    Image
  2. Click the Commit button in the options bar (Image) to apply the current crop settings. Content-Aware Crop fills in the empty areas at the top and sides of the image.

    Image
  3. Save your changes, and close the document.

Correcting image distortion

The Lens Correction filter fixes common camera lens flaws, such as barrel and pincushion distortion, chromatic aberration, and vignetting. Barrel distortion is a lens defect that causes straight lines to bow out toward the edges of the image. Pincushion distortion is the opposite effect, causing straight lines to bend inward. Chromatic aberration appears as a color fringe along the edges of image objects. Vignetting occurs when the edges of an image, especially the corners, are darker than the center.

Some lenses exhibit these defects depending on the focal length or the f-stop used. The Lens Correction filter can apply settings based on the camera, lens, and focal length that were used to make the image. The filter can also rotate an image or fix image perspective caused by tilting a camera vertically or horizontally. The filter’s image grid makes it easier and more accurate to make these adjustments than using the Transform command.

  1. Choose File > Browse In Bridge.

  2. Navigate to the Lesson05 folder if you’re not already there, and then look at the Columns_Start.psd and Columns_End.psd thumbnail previews.

    Image

In this case, the original image of a Greek temple is distorted, with the columns appearing to be bowed. This photo was shot at a range that was too close with a wide-angle lens. You’ll quickly correct the lens barrel distortion.


Image Tip

If the crop rectangle from the previous exercise is still visible and distracting, switch to a tool such as the Hand tool.


  1. Double-click the Columns_Start.psd file to open it in Photoshop.

  2. Choose File > Save As. In the Save As dialog box, name the file Columns_Working.psd, and save it in the Lesson05 folder. Click OK if the Photoshop Format Options dialog box appears.

  1. Choose Filter > Lens Correction. The Lens Correction dialog box opens.

  2. Select Show Grid at the bottom of the dialog box, if it’s not already selected.

An alignment grid overlays the image. To the right are options for automatic corrections based on lens profiles. In the Custom tab are manual controls for correcting distortion, chromatic aberration, and perspective.

Image

The Lens Correction dialog box includes auto-correction options. You’ll adjust one setting in the Auto Correction tab and then customize the settings.

  1. In the Correction area of the Auto Correction tab, make sure Auto Scale Image is selected, and that Transparency is selected from the Edge menu.

  2. Select the Custom tab.

  3. In the Custom tab, drag the Remove Distortion slider to about +52.00 to remove the barrel distortion in the image. Alternatively, you could select the Remove Distortion tool (Image) and drag in the image preview area until the columns are straight. The adjustment causes the image borders to bow inward. However, because you selected Auto Scale Image, the Lens Correction filter automatically scales the image to adjust the borders.


    Image Tip

    Watch the alignment grid as you make these changes so that you can see when the vertical columns are straightened in the image.


  4. Click OK to apply your changes and close the Lens Correction dialog box.

    Image

The curving distortion caused by the wide-angle lens and low shooting angle is eliminated.

  1. (Optional) To compare the image before and after the last change, press Ctrl+Z (Windows) or Command+Z (Mac) to undo the filter, and then press Ctrl+Shift+Z (Windows) or Command+Shift+Z (Mac) to redo the filter.

  2. Choose File > Save to save your changes, click OK if the Photoshop Format Options dialog box appears, and then close the image.

    Image

The temple looks much more stable now!

Extending depth of field

When you’re shooting a photo, you often have to choose to focus on either the background or the foreground. If you want the entire image to be in focus, you can take two photos—one with the background in focus and one with the foreground in focus—and then merge the two in Photoshop.

Because you’ll need to align the images exactly, it’s helpful to use a tripod to keep the camera steady. However, you may be able to get good results with a handheld camera if you pay attention to framing and alignment. In this exercise, you’ll add depth of field to an image of a wine glass in front of a beach.

  1. Choose File > Browse In Bridge.

  2. Navigate to the Lesson05 folder, if you’re not there already, and then look at the Glass_Start.psd and Glass_End.psd thumbnail previews.

    Image

The first image has two layers. Depending on which layer is visible, either the glass in the foreground or the beach in the background is in focus. You’ll extend the depth of field to make both clear.

  1. Double-click the Glass_Start.psd file to open it.

  2. Choose File > Save As. Name the file Glass_Working.psd, and save it in the Lesson05 folder. Click OK if the Photoshop Format Options dialog box appears.

  1. In the Layers panel, hide the Beach layer, so that only the Glass layer is visible. The glass is in focus, but the background is blurred. Then, show the Beach layer again. Now the beach is in focus, but the glass is blurred.

    Image

You’ll merge the layers, using the part of each layer that is in focus. First, you need to align the layers.

  1. Shift-click to select both of the layers.

    Image
  2. Choose Edit > Auto-Align Layers.

Because these images were shot from the same angle, Auto will work just fine.

  1. Select Auto, if it isn’t already selected. Make sure neither Vignette Removal nor Geometric Distortion is selected. Then click OK to align the layers.


Image Tip

When aligning layers that are not involved in a panorama, Reposition is often the best alignment option to use. In this exercise, Reposition is the projection that the Auto option chose.


Image

Now that the layers are perfectly aligned, you’re ready to blend them.

  1. Make sure both layers are still selected in the Layers panel. Then choose Edit > Auto-Blend Layers.

  2. Select Stack Images and Seamless Tones And Colors, if they aren’t already selected. Make sure Content Aware Fill Transparent Areas is not selected, and then click OK.


Image Tip

The technique in this exercise, called focus stacking, is useful for macro photography, where depth of field is typically very shallow. Multiple images with shallow depth of field are shot at different focus distances, and then merged.


Image

Both the wine glass and the beach behind it are in focus.

  1. Save your work, and close the file.

Removing objects using Content-Aware Fill

You’ve used the content-aware features in some pretty impressive ways in earlier lessons, and to fill in the sky in the panorama project in this lesson. Now you’ll use Content-Aware Fill to remove an unwanted object and have Photoshop convincingly fill in the area instead of leaving a blank space.

  1. Choose File > Browse In Bridge.

  2. Navigate to the Lesson05 folder, if you’re not there already, and then look at the JapaneseGarden_Start.jpg and Japanese Garden_End.jpg thumbnail previews.

    Image

You’ll use the Content-Aware Fill tool to remove a rock and its reflection.

  1. Double-click the JapaneseGarden_Start.jpg file to open it in Photoshop.

  2. Choose File > Save As, choose Photoshop for the format type, and name the new file JapaneseGarden_Working.psd. Click Save. Click OK if the Photoshop Format Options dialog box appears.

  3. Select the Lasso tool, and in the options bar, set Feather to 25px.

    Image
  4. Drag a selection marquee around the rock on the left and the rock’s reflection below it, including some of the water around it. The selection can be approximate.

    Image
  5. Choose Edit > Content-Aware Fill.

    Image

    A. Sampling Brush tool B. Sampling area C. Content-Aware Fill options D. Preview zoom E. Reset


Image Tip

Preview is a panel. You can drag the divider between the image and the Preview panel. You can drag the Preview panel tab to undock it, making Preview a floating panel. This Preview panel is available only when using Content-Aware Fill.


The left side of the Content-Aware Fill dialog box displays the image and the selection you made. The colored area (displayed in green by default) indicates areas you want Content-Aware Fill to sample (use as a source) for filling the removed area.

The right side previews the results of the sampling area combined with the settings in the Content-Aware Fill options panel.

With the current sampling area and settings, the rock is successfully removed, but some of the tree leaves from the sampling area may be filling in the water, and that isn’t desirable.

  1. Press the ] key to enlarge the Sampling Brush tool until the options bar indicates that the brush size is around 700 pixels. The Sampling Brush tool is selected by default when you open the Content-Aware Fill dialog box.

    Image

Notice that a minus sign (–) appears in the Sampling Brush pointer. This is because the tool is set to Subtract mode, which is indicated in the options bar.

  1. Paint over foliage to exclude it from the sampling area. Areas you exclude are no longer green. As you do this, the fill is recalculated, and you can see the updated results in the Preview panel.

  2. As soon as the fill looks like it consists only of water, you can stop painting.

    Image

It may take some trial and error for the results to be successful. You may be able to improve the results using the following technique:

  • Use the Sampling Brush in Subtract mode to exclude more areas, to stop them from contributing incorrect content to the fill. For example, it might help to also exclude the lantern and all the areas that are not water.

  • Use the Lasso tool to change the original selection. For example, try using the Lasso tool in Subtract mode to trim the selection where unwanted foliage is included, while still including all of the rock.

  • Adjust the Fill Settings. For this exercise, adjusting the Color Adaptation setting should be the most useful. You probably won’t use the other options, although they are useful in other situations. Rotation Adaptation is useful for re-creating missing areas of content that’s radial (such as a flower) or along an arc. Scale helps adapt a fill for patterned content. The Mirror option can be useful for symmetrical content.


Image Tip

To quickly switch the Lasso tool between the Add and Subtract modes, press the E key.



Image Tip

Content-Aware Fill randomizes results to make fixes look more natural, but if you want more consistent results, select the Enable Repeatability option. This will cause the preview to take longer to calculate and display.


  1. When you’re satisfied with the result, click OK, and then choose Select > Deselect.

In the Layers panel, notice that by default, the fill is created as a new layer named Background Copy. If you hide the new layer, you can see the entire original image in the Background layer.

Image

Image Tip

If you don’t want Content-Aware Fill to create the fill as a new layer, before closing Content-Aware Fill, change the Output To option in Output Settings.


  1. Save your work as a Photoshop document, and then close it.

Adjusting perspective in an image

The Perspective Warp feature lets you adjust the way objects in your image relate to the scene. You can correct distortions, change the angle from which an object appears to be viewed, or shift the perspective of an object so that it merges smoothly with a new background.

Using the Perspective Warp feature is a two-step process: defining the planes and adjusting them. You start in Layout mode, drawing quads to define two or more planes; it’s a good idea to align the edges of the quads so that they are parallel with the lines of the original object. Then you switch to Warp mode, and manipulate the planes you defined.

You’ll use Perspective Warp to merge images with different perspectives.

  1. Choose File > Browse In Bridge.

  2. Navigate to the Lesson05 folder, if you’re not there already, and then look at the Bridge_Start.psd and Bridge_End.psd thumbnail previews.

Image

In the Bridge_Start.psd file, the image of the train has been combined with the image of a trestle bridge, but their perspectives don’t match. If you’re illustrating a story about a flying train that is making a landing on a trestle bridge, this might be perfect. But if you want a more realistic image, you’ll need to adjust the perspective of the train to put it firmly on the tracks. You’ll use Perspective Warp to do just that.

  1. Double-click the Bridge_Start.psd file to open it in Photoshop

  2. Choose File > Save As, and rename the file Bridge_Working.psd. Click OK in the Photoshop Format Options dialog box.

  3. Select the Train layer.

    Image

The tracks are on the Background layer. The train is on the Train layer. Because the Train layer is a Smart Object, you can apply Perspective Warp and then modify the results if you’re not satisfied.

  1. Choose Edit > Perspective Warp.


Image Note

Perspective Warp can work faster on a computer that qualifies for graphics acceleration. To see if your computer qualifies, see the Getting Started chapter for a link to the Photoshop system requirements.


A small animated tutorial appears, showing you how to draw a quad, which defines a plane.

  1. Watch the animation, and then close it.

Now you’ll create quads to define the planes of the train image.

  1. Draw the quad for the side of the train: Click above the top of the smokestack, drag down to the railroad tie below the front wheel, and then drag across to the end of the caboose. The plane is currently a rectangle.

  2. Drag a second quad for the front of the train, dragging across the cowcatcher at the bottom and into the trees at the top. Drag it to the right until it attaches to the left edge of the first quad.

  3. Drag the corners of the planes to match the angles of the train. The bottom line of the side plane should run along the bottom of the train wheels; the top edge should border the top of the caboose. The front plane should mirror the lines of the cowcatcher and the top of the light.

    Image

Now that the quads are drawn, you’re ready for the second step in the process: warping.

  1. Click Warp in the options bar. Close the tutorial box that shows you how to warp the plane.

  2. Click the Automatically Straighten Near Vertical Lines button, next to Warp in the options bar.

    Image

This makes the train appear properly vertical, making it easier to adjust the perspective accurately.

  1. Drag the handles to manipulate the planes, moving the back end of the train down and into perspective with the tracks. Exaggerate the perspective toward the caboose for a more dramatic result.

  2. Warp other parts of the train as needed. You may need to adjust the front of the train. Pay attention to the wheels; make sure you don’t distort them as you warp the perspective.

    Image

While there are precise ways to adjust perspective, in many cases you may need to trust your eyes to tell you when it looks right. Remember that you can return to tweak it again later, because you’re applying Perspective Warp as a Smart Filter.

  1. When you’re satisfied with the perspective, click the Commit Perspective Warp button (Image) in the options bar.

  2. To compare the changed image with the original, hide the Perspective Warp filter in the Layers panel. Then show the filter again.

If you want to make further adjustments, double-click the Perspective Warp filter in the Layers panel. You can continue to adjust the existing planes, or click Layout in the options bar to reshape them. Remember to click the Commit Perspective Warp button to apply your changes.

  1. Save your work, and close the file.

Review questions

1 What is red eye, and how do you correct it in Photoshop?

2 How can you create a panorama from multiple images?

3 Describe how to fix common camera lens flaws in Photoshop. What causes these defects?

4 What conditions provide the best results when using the Content-Aware Move tool?

Review answers

1 Red eye occurs when a camera flash is reflected in the retinas of a subject’s eyes. To correct red eye in Photoshop, zoom in to the subject’s eyes, select the Red Eye tool, and then click each eye.

2 To blend multiple images into a panorama, choose File > Automate > Photomerge, select the files you want to combine, and click OK.

3 The Lens Correction filter fixes common camera lens flaws, such as barrel and pincushion distortion, in which straight lines bow out towards the edges of the image (barrel) or bend inward (pincushion); chromatic aberration, where a color fringe appears along the edges of image objects; and vignetting at the edges of an image, especially corners, that are darker than the center. Defects can occur from incorrectly setting the lens focal length or f-stop, or by tilting the camera vertically or horizontally.

4 The Content-Aware Move tool works best in images that have consistent backgrounds so that Photoshop can seamlessly replicate the patterns.

..................Content has been hidden....................

You can't read the all page of ebook, please click here login for view all page.
Reset
54.173.43.215