2 Basic Photo Corrections

Lesson overview

In this lesson, you’ll learn how to do the following:

  • Understand image resolution and size.

  • View and access files in Adobe Bridge.

  • Straighten and crop an image.

  • Adjust the tonal range of an image.

  • Use the Spot Healing Brush tool to repair part of an image.

  • Use the content-aware Patch tool to remove or replace objects.

  • Use the Clone Stamp tool to touch up areas.

  • Remove digital artifacts from an image.

  • Apply the Smart Sharpen filter to finish retouching photos.

Image

This lesson will take about an hour to complete. To get the lesson files used in this chapter, download them from the web page for this book at www.adobepress.com/PhotoshopCIB2020. For more information, see “Accessing the lesson files and Web Edition” in the Getting Started section at the beginning of this book.

As you work on this lesson, you’ll preserve the start files. If you need to restore the start files, download them from your Account page.

Image

PROJECT: VINTAGE PHOTOGRAPH RESTORATION
Photoshop includes a variety of tools and commands for improving the quality of a photographic image. This lesson steps you through the process of acquiring, resizing, and retouching a vintage photograph.

Strategy for retouching

How much retouching you do depends on the image you’re working on and your goals for it. For many images, you may need only to change the resolution, lighten the image, or repair a minor blemish. For others, you may need to perform several tasks and employ more advanced tools and techniques.

Image Note

In this lesson, you retouch an image using Photoshop. For some images, such as those saved in camera raw format, it may be more efficient to work in Adobe Camera Raw, which is installed with Photoshop. You’ll learn about the tools Camera Raw has to offer in Lesson 12, “Working with Camera Raw.”

Organizing an efficient sequence of tasks

Most retouching procedures follow these general steps, which you’ll learn about in this chapter:

  • Duplicating the original image; working in a copy of the image file makes it easy to recover the original later if necessary

  • Ensuring that the resolution is appropriate for the way you’ll use the image

  • Cropping the image to its final size and orientation

  • Removing any color casts

  • Adjusting the overall contrast or tonal range of the image

  • Repairing flaws in scans of damaged photographs (such as rips, dust, or stains)

  • Adjusting the color and tone in specific parts of the image to bring out highlights, midtones, shadows, and desaturated colors

  • Sharpening the image

The order of the tasks may vary depending on the project, and not every task may be necessary for all projects. In a basic workflow, adjusting resolution should be the first step, and sharpening should usually be your final step. For the other tasks, consider your project and plan accordingly, so that the results of one process do not cause unintended changes to other aspects of the image.

Adjusting your process for different intended uses

The decisions you make for retouching an image depend in part on how you’ll use the image. For example, if an image is intended for black-and-white publication on newsprint, you might make different cropping and sharpening choices than if the image is intended for a full-color web page. Photoshop supports RGB color mode for web and mobile device authoring and desktop photo printing, CMYK color mode for preparing an image for printing using process colors, Grayscale mode for black-and-white printing, and other color modes for more specialized purposes. You can also use Photoshop to adjust image pixel dimensions or resolution.

Resolution and image size

When you edit an image in Photoshop for a specific use, you need to make sure the image contains an appropriate number of pixels, the small squares that describe an image and establish the degree of detail it contains. You can work this out from the pixel dimensions, or the number of pixels along an image’s width and height.

Image

Pixels in a photographic image

Image Note

In Photoshop, the 100% view does not preview the image’s ppi value (resolution); the image is shown at the ppi value of your display. In other words, at 100% zoom, each display pixel shows one image pixel. This means 100% may appear smaller on a very high resolution display.

When you multiply an image’s width by its height in pixels, you find out how many pixels are in the image. For example, a 1000 × 1000 pixel image has 1,000,000 pixels (one megapixel), and a 2000 × 2000 pixel image has 4,000,000 pixels (four megapixels). Pixel dimensions affect file size and upload/download time.

Image Note

For computer displays and televisions, the term resolution often describes only the pixel dimensions (such as 1920 × 1080 pixels) instead of a pixel density ratio (300 pixels per inch). In Photoshop, resolution is the pixels per inch value, not the pixel dimensions.

In Photoshop, resolution means the number of pixels per unit of physical length, such as pixels per inch (ppi).

Does changing resolution affect file size? Only when the pixel dimensions change. For example, a 7 × 7 inch image at 300 ppi is 2100 × 2100 pixels; if you change either the size in inches or the ppi value (resolution) while keeping the pixel dimensions at 2100 × 2100 pixels, the file size does not change. But if you change the size in inches without changing the ppi value (or vice versa), the pixel dimensions must change, and so will the file size. For example, if the image in the above example is changed to 72 ppi while maintaining 7 × 7 inches, the pixel dimensions must change to 504 × 504 pixels, and the file size decreases accordingly.

Image Tip

To determine the resolution needed for an image you’ll print on a press, follow this industry guideline: Edit the image to a ppi value that is 1.5 to 2 times the halftone screen frequency (in lines per inch, or lpi) used by the printer. For example, if the image will be printed using a screen frequency of 133 lpi, the image should be 200 ppi (133 × 1.5).

Resolution requirements vary depending on the intended output. An image might be considered low resolution when its ppi value is below 150 to 200 ppi. An image with a ppi value above 200 ppi is generally considered high resolution because it can contain enough detail to take advantage of the device resolution offered by commercial or fine art printers and high-resolution (Retina/HiDPI) device displays.

Factors such as viewing distance and output technology influence the resolution our eyes actually perceive, and this affects resolution requirements too. A 220-ppi laptop display may appear to have the same high resolution as a 360-ppi smartphone, because the laptop is viewed farther away. But 220 ppi might not be enough resolution for a high-end printing press or fine art inkjet printer, which might reproduce the most detail at 300 ppi and up. At the same time, a 50-ppi image can appear perfectly sharp on a highway billboard because it’s seen from hundreds of feet away.

Because of the way display and output technologies work, your images may not need to match the device resolution of high-resolution printers. For example, while some commercial printing platesetters and photo-quality inkjet printers may have a device resolution of 2400 dots per inch (dpi) or more, the appropriate image resolution to send to those devices may be only 200 to 360 ppi for photos. This is because the device dots are grouped into larger halftone cells or inkjet dot patterns that build tones and colors. Similarly, a 500-ppi smartphone display may not necessarily require 500-ppi images. Whatever your medium, you should verify the appropriate image resolution of your final images by consulting with your production team or output service provider.

Opening a file with Adobe Bridge

In this book, you’ll work with different start files in each lesson. You may make copies of these files and save them under different names or locations, or you may work from the original start files and then download them from the peachpit.com website again if you want a fresh start.

In this lesson, you’ll retouch a scan of a damaged and discolored vintage photograph so it can be shared or printed. The final image size will be 7 × 7 inches.

Image Note

If Bridge isn’t installed, the File > Browse in Bridge command in Photoshop will start the Creative Cloud desktop app, which will download and install Bridge. After installation completes, you can start Bridge.

In Lesson 1, you used the Open command to open a file. You’ll start this lesson by comparing the original scan to the finished image in Adobe Bridge, a visual file browser that helps take the guesswork out of finding the image file that you need.

  1. Start Photoshop, and then immediately hold down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac) to reset the default settings.

  2. When prompted, click Yes to confirm that you want to delete the Adobe Photoshop Settings file.

  3. Choose File > Browse In Bridge. If you’re prompted to enable the Photoshop extension in Bridge, click Yes or OK.

Image Note

If Bridge asks you if you want to import preferences from a previous version of Bridge, select Don’t Show Again, and click No.

Adobe Bridge opens, displaying a collection of panels, menus, and buttons.

  1. Select the Folders tab in the upper left corner, and then browse to the Lessons folder you downloaded onto your hard disk, so that the lessons in the Lessons folder appear in the Content panel.

Images

Image Tip

If the Favorites panel list and a folder you want to add to Favorites are both visible, you can drag the folder and drop it in the Favorites panel. You can even drag and drop to add a folder from your computer desktop to the Favorites panel.

  1. With the Lessons folder still selected in the Folders panel, choose File > Add To Favorites.

The Favorites panel lets you quickly access files, folders, applications, and other assets that you frequently use.

  1. Click the Favorites tab to open the panel, and click the Lessons folder to open it. Then, in the Content panel, double-click the Lesson02 folder.

Thumbnail previews of the folder contents appear in the Content panel.

Images

Image Tip

In Bridge, you can see a larger preview of a selected item by using the Preview panel (choose Window > Preview Panel). If that’s not big enough, you can resize the Preview panel. Or, press the spacebar to see a full screen preview of the selected item.

  1. Compare the 02Start.tif and 02End.psd files. To enlarge the thumbnails in the Content panel, drag the thumbnail slider at the bottom of the Bridge window to the right.

In the 02Start.tif file, notice that the image is crooked, the colors are relatively dull, and the image has a green color cast and a distracting crease. You’ll fix all of these problems in this lesson, and a few others. You’ll start by cropping and straightening the image.

  1. Double-click the 02Start.tif thumbnail to open the file in Photoshop. Click OK if you see the Embedded Profile Mismatch dialog box.

Image Note

If Photoshop displays a dialog box telling you about the difference between saving to Cloud Documents and Your Computer, click Your Computer. You can also select Don’t Show Again, but that setting will deselect after you reset Photoshop preferences.

  1. In Photoshop, choose File > Save As. Choose Photoshop from the Format menu, and name the file 02Working.psd. Then click Save.

    Images

Straightening and cropping the image in Photoshop

Image Tip

Deselect the Delete Cropped Pixels option if you want the document to keep the pixels outside the crop area. This is useful if you think you might change your mind, because you can enlarge the crop area to reveal previously cropped areas.

You’ll use the Crop tool to straighten, trim, and scale the photograph. By default, cropping deletes cropped pixels.

  1. In the Tools panel, select the Crop tool ().

Crop handles appear, and a crop shield covers the area outside the cropping region, to help focus your attention on the cropped area.

  1. In the options bar, choose W × H × Resolution from the Select a Preset Aspect Ratio or Crop Size menu. (Ratio is the default value.) A crop overlay appears.

  2. In the options bar, type 7 in for the width, 7 in for the height, and 200 px/in for the resolution.

    Images

First, you’ll straighten the image.

  1. Click the Straighten icon in the options bar. The pointer changes to the Straighten tool.

  2. Click at the top left corner of the photo, press the mouse button as you drag a straight line across the top edge of the photo, and then release.

    Images

Photoshop straightens the image so that the line you drew is parallel with the top of the image area. You drew a line across the top of the photo, but any line that defines either the vertical or horizontal axis of the image will work.

Now, you’ll trim the white border and scale the image.

Image Tip

The Crop tool will continue to create a 7 × 7 inch, 200 ppi crop as long as the current options bar settings are applied. If you want to crop with total freedom, click the Clear button in the Crop tool options bar.

  1. Drag the corners of the crop rectangle inward to crop out the white border. If you need to adjust the position of the photo inside the crop, position the pointer within the crop rectangle and drag the photo.

  2. Press Enter or Return to accept the crop.

Image Tip

If you need to adjust the crop after the crop rectangle disappears, choose Edit > Undo, and try again.

The image is now cropped, straightened, sized, and positioned according to the Crop tool options you used.

Images

Image Tip

To quickly straighten a photo and crop out the scanned background, choose File > Automate > Crop And Straighten Photos. It can also automatically separate multiple photos scanned in one image.

  1. If the image dimensions are not already displayed in the status area at the bottom of the application window, click the arrow there and choose Document Dimensions from the pop-up menu that appears.

    Images

Image Tip

If you need to see more detail while cropping, it’s OK to change the view magnification while the Crop tool is active.

  1. Choose File > Save to save your work. Click OK if you see the Photoshop Format Options dialog box.

Adjusting the color and tone

You’ll use Curves and Levels adjustment layers to remove the color cast and adjust the color and tone in the image. The Curves or Levels options may look complex, but don’t be intimidated. You’ll work with them more in later lessons; for now, you’ll take advantage of their tools to quickly brighten and adjust the tone of the image.

Image Tip

If the Libraries panel is open and taking up a lot of screen space, go ahead and collapse or close it, because it won’t be used in this lesson.

  1. In the Adjustments panel, click the Curves icon (first row, third button). This adds a Curves adjustment layer.

  2. Select the White Point tool on the left side of the Properties panel.

    Images

The White Point tool defines what color value should be made a neutral white. Once defined, all other colors and tones shift accordingly. When done correctly, this is a quick way to remove a color cast and correct image brightness. To set an accurate white point, click an area of the image that should be the brightest neutral area of the image that contains detail — not a blown-out area like the sun or a lamp, and not a specular highlight such as a reflection of sunlight on chrome.

  1. Click a white stripe on the girl’s dress.

    Images

Image Tip

If you want to know the color values of the pixels that the pointer is positioned over, they’re displayed in the Info panel (Window > Info).

The white stripe has a warm color cast that affects the entire image, and it’s darker than it should be. Clicking it removes the color cast and lightens it, dramatically improving image contrast and color. Try clicking different white areas, such as the child’s sailor dress, a stripe on the woman’s dress, or the child’s sock, to see how the color values at each location change the result.

Now you’ll use a Levels adjustment layer to fine-tune the tonal range of the image.

Image Note

The color and tone edits in this section are relatively basic; it’s possible to do them all using only Levels or Curves. Typically, Curves is used for edits that are more specialized or complex.

  1. In the Adjustments panel (if needed, click its tab to make it visible), click the Levels icon () (first row, second button) to add a Levels adjustment layer.

The Levels histogram in the Properties panel displays the range of dark and light values in the image. You’ll learn more about working with levels in later lessons. Right now, you just need to know that the left triangle represents the black point (the tonal level you want to set as the darkest in the image), the right triangle represents the white point (the tonal level you want to set as the lightest in the image), and the middle triangle represents the midtones.

  1. Drag the left triangle (black point) under the histogram to the right, where significant shadow tones start to appear. Our value was 15.

  2. Drag the middle triangle a little to the right to adjust the midtones. Our value was .90.

    Images

Now that you’ve adjusted the color, you’ll flatten the image so it’s easier to work with while you touch it up. Flattening an image merges all of its layers into the Background layer, which reduces the file size; you can still make changes to the entire image. But flatten only if you no longer need the flexibility of adjusting the edits you previously made using separate layers.

  1. Choose Layer > Flatten Image.

    Images

The adjustment layers merge with the Background layer.

Using the Spot Healing Brush tool

Image Note

The Healing Brush tool works similarly to the Spot Healing Brush tool, except that it requires you to sample source pixels before retouching an area.

The next task is to remove the crease in the photo. You’ll use the Spot Healing Brush to erase the crease. While you’re at it, you’ll use it to address a few other issues.

The Spot Healing Brush tool quickly removes blemishes and other imperfections. It samples pixels around the retouched area and matches the texture, lighting, transparency, and shading of the sampled pixels to the pixels being healed.

The Spot Healing Brush is excellent for retouching blemishes in portraits, but also works nicely wherever there’s a uniform appearance near the areas you want to retouch.

  1. Zoom in to see the crease clearly.

  2. In the Tools panel, select the Spot Healing Brush tool ().

  3. In the options bar, open the Brush pop-up panel, and specify a brush with a Size of about 25 px and 100% Hardness. Make sure Content-Aware is selected in the options bar.

Image Tip

To avoid creating obvious new seams or patterns, paint the Spot Healing Brush closely around the area you’re repairing. Don’t cover more area than necessary.

  1. In the image window, drag the Spot Healing Brush down from the top of the crease. You can probably repair the entire crease with four to six neat downward strokes. As you drag, the stroke at first appears black, but when you release the mouse, the painted area is “healed.”

    Images

Image Tip

You may not be able to see the entire crease when you’re zoomed in, but you can reposition the view as you work without switching tools. Use the scroll bars, or hold down the spacebar to temporarily use the Hand tool.

  1. Zoom in to see the white hair in the upper right area of the image. Then use the Spot Healing Brush to paint over the hair.

    Images
  2. Zoom out, if necessary, to see the full sky. Then click the Spot Healing Brush wherever there are unwanted spots you want to heal.

  3. Save your work so far.

Applying a content-aware patch

Use the Patch tool to remove larger unwanted elements from an image. You’ll use a content-aware patch to remove an unrelated person from the right side of the photo. In Content-Aware mode, the Patch tool creates nearly seamless blending with the nearby content.

  1. In the Tools panel, select the Patch tool (), hidden under the Spot Healing Brush tool ().

  2. In the options bar, choose Content-Aware from the Patch menu. Type 4 into the Structure slider.

The Structure menu determines how closely the patch reflects the existing image patterns. You can choose from 1 to 7, with 1 allowing the loosest adherence to the source structure and 7 requiring the strictest.

  1. Drag the Patch tool around the boy and his shadow. It isn’t necessary to be exact, but draw a tight selection. You may want to zoom in to see him more clearly.

Image Note

The healing and content-aware tools may produce results that still need a small amount of manual touch-up. It isn’t realistic to expect them to be perfect every time; the point of the tools is to reduce the total amount of retouching time.

  1. 4 Position the pointer within the area you’ve just selected, and drag the selection to the left. Photoshop displays a preview of the content that will replace the boy. Position the dragged area so that the preview area no longer overlaps the area occupied by the boy, but also doesn’t overlap the woman or the girl she’s holding. Release the mouse button when the patch is positioned where you want it.

    Images

The selection changes to better match the area around it. The boy is gone, and where he stood is a section of the bridge wall and of a building.

  1. Choose Select > Deselect.

The effect is impressive, but not quite perfect. You’ll touch up the results next.

Repairing areas with the Clone Stamp tool

The Clone Stamp tool uses pixels from one area of an image to replace the pixels in another part of the image. Using this tool, you can not only remove unwanted objects from your images, but you can also fill in missing areas in photographs you scan from damaged originals.

You’ll use the Clone Stamp tool to smooth out some irregularities in the height of the bridge wall and the windows on the building.

Image Tip

You may need to set a larger brush size when editing higher resolution images.

  1. Select the Clone Stamp tool () in the Tools panel, and select a 60-px brush with 30% Hardness. Make sure that the Aligned option is selected.

  2. Move the Clone Stamp tool to an area where the top of the bridge wall is smooth. That’s the area you want to copy to smooth out the area that was patched.

  3. Alt-click (Windows) or Option-click (Mac) to sample that part of the image as a source point. (When you press Alt or Option, the pointer appears as target cross-hairs.)

  4. Drag the Clone Stamp tool across the top of the bridge wall in the patched area to even it out, and then release the mouse button.

    Images

Image Tip

Unlike the Spot Healing Brush and Patch tools you used earlier, the Clone Stamp tool doesn’t try to make edits seamless. It simply copies pixels from the source point to where you drag, so it may take more manual work to make an edit look good.

Each time you click the Clone Stamp tool, it begins again with a new source point, in the same relationship to the tool as the first stroke you made. That is, if you begin painting farther right, it samples from stone that is farther right than the original source point. That’s because Aligned is selected in the options bar. Deselect Aligned if you want to start from the same source point each time.

  1. Select a source point where the bottom of the bridge wall is even, and then drag the Clone Stamp tool across the bottom of the wall where you patched it.

    Images
  2. Select a smaller brush size, and deselect Aligned. Then select a source point over the rightmost windows in the lowest row on the building you patched. Click across to create accurate windows there.

    Images
  3. Repeat step 6 to make any adjustments you want to apply to the lowest area of the building and the wall that runs in front of it. Look carefully for areas that obviously repeat as a result of the cloning, and retouch them.

    Images
  4. If you like, you can use a smaller brush size to touch up the stones in the patched portion of the wall.

  5. Save your work.

Sharpening the image

The last task you might want to do when retouching a photo is to sharpen the image. There are several ways to sharpen an image in Photoshop, but the Smart Sharpen filter gives you the most control. Because sharpening can emphasize artifacts, you’ll remove those first.

  1. Zoom in to about 400% to see the boy’s shirt clearly. The colored dots you see are artifacts of the scanning process.

  2. Choose Filter > Noise > Dust & Scratches.

  3. In the Dust & Scratches dialog box, leave the default settings with a Radius of 1 pixel and Threshold at 0, and click OK.

    Images

The Threshold value determines how dissimilar the pixels should be before they are eliminated. The Radius value determines the size of the area searched for dissimilar pixels. The default values are great for tiny dots of color like the ones in this image.

Now that the artifacts are gone, you can sharpen the image.

  1. Choose Filter > Sharpen > Smart Sharpen.

  2. In the Smart Sharpen dialog box, make sure that Preview is selected, so you can see the effect of settings you adjust in the image window.

You can drag inside the preview window in the dialog box to see different parts of the image, or use the magnification buttons below the thumbnail to zoom in and out.

  1. Make sure Lens Blur is chosen in the Remove menu.

Image Tip

When using a dialog box such as Smart Sharpen, remember that clicking the Preview option lets you compare before-and-after views of the settings you’re applying.

You can choose to remove Lens Blur, Gaussian Blur, or Motion Blur in the Smart Sharpen dialog box. Lens Blur provides finer sharpening of detail and reduced sharpening halos. Gaussian Blur increases contrast along the edges in an image. Motion Blur reduces the effects of blur that resulted from the camera or the subject moving when the photo was taken.

  1. Drag the Amount slider to about 60% to sharpen the image.

  2. Drag the Radius slider to about 1.5.

The Radius value determines the number of pixels surrounding the edge pixels that affect the sharpening. The higher the resolution, the higher the Radius setting should usually be.

  1. When you’re satisfied with the results, click OK to apply the Smart Sharpen filter.

    Images
  2. Choose File > Save, and then close the project file.

Your image is ready to share or print!

Review questions

1 What does resolution mean?

2 What are some ways to use the Crop tool to improve an image?

3 How can you adjust the tone and color of an image in Photoshop?

4 What tools can you use to remove blemishes in an image?

5 How can you remove artifacts such as colored pixels and scanned dust from an image?

Review answers

1 The term resolution refers to the number of pixels per unit of physical length in an image, expressed in pixels per inch (ppi). Printer resolution may be expressed in dots per inch (dpi), because device dots do not always correspond to image pixels.

2 You can use the Crop tool to trim, scale, or straighten an image.

3 You can adjust the tone and color of an image in Photoshop using the Curves and Levels adjustment layers, such as applying the White Point tool.

4 The Healing Brush, Spot Healing Brush, Patch, and Clone Stamp tools let you replace unwanted portions of an image with other areas of the image. The Clone Stamp tool copies the source area exactly; the Healing Brush and Spot Healing Brush tools blend the area with the surrounding pixels. The Spot Healing Brush tool doesn’t require a source area; it “heals” areas to match the surrounding pixels. In Content-Aware mode, the Patch tool replaces a selection with content that matches the surrounding area.

5 The Dust & Scratches filter removes artifacts from an image.

..................Content has been hidden....................

You can't read the all page of ebook, please click here login for view all page.
Reset
44.220.62.183