References

1 Mikrosystemtechnik für Ingenieure 1997 VCH Verlagsgesellschaft ISBN 3-527-29405-8

2 D.M. Cao, J. Jiang, W.J. Meng, J.C. Jiang, W. Wang, Fabrication of high-aspect-ratio microscale Ta mold inserts with micro electrical discharge machining Microsystem Technologies 13 5 2007, 503-510

3 D.M. Cao, J. Jiang, R. Yang, W.J. Meng, Fabrication of high-aspect-ratio microscale mold inserts by parallel μEDM Microsystem Technologies 12 9 2006, 839-845

4 B. Denkena, H.-W. Hoffmeister, M. Reichstein, S. Illenseer, M. Hlavac, Micro-machining processes for microsystem technology Microsystem Technologies 12 2006, 659-664

5 E.W. Becker, W. Ehrfeld, P. Hagmann, A. Manera, D. Muenchmeyer, Fabrication of microstructures with high aspect ratios and great structural heights by synchroton radiation lithography galvanoforming and plastic molding (LIGA process) Microelectronic Engineering 4 1986, 35-56

6 J. Fahrenberg, Th. Schaller, W. Bacher, A. El-Kholi, W.K. Schomburg, High aspect ratio multi-level mold inserts fabricated by mechanical micro machining and deep etch X-ray lithography Microsystem Technologies 2 1996, 174-177

7 J. Fleischer, J. Kotschenreuther, The manufacturing of micro molds by conventional and energy-assisted processes I. Journal Adv. Manuf. Technol. 33 1–2 2006, 75-85

8 T. Gietzelt, L. Eichhorn, K. Schubert, Material and micromachining aspects of manufacturing micromolds for replication techniques Advanced Engineering Materials 8 1–2 2006, 33-37

9 T. Gietzelt, L. Eichhorn, K. Schubert, Manufacturing of microstructures with high aspect ratio by micromachining Microsystem Technologies 14 9–11 2008, 1525-1529

10 C. Guichard. Use of Plastic Mold Inserts in Hot Embossing. Master's thesis, Université de Franche Comté—Science et Techniques, 2003.

11 T. Hanemann, W. Pfleging, J. Hausselt, K.-H. Zum Gahr, Laser micromaching and light induced reaction injection molding as suitable process sequence for the rapid fabrication of microcomponents Microsystem Technologies 7 2002, 209-214

12 D. Herrmann. Herstellung gedeckelter Mikrokapillarstrukturen. Master's thesis, University of Karlsruhe (TH), Institute for Microstructure Technology, 2000.

13 M.L. Hupert, W.J. Guy, S.D. Llopis, H. Shadpour, S. Rani, D.E. Nikitopoulos, S.A. Soper, Evaluation of micromilled metal mold masters for the replication of microchip electrophoresis devices Microfluid Nanofluid 3 2007, 1-11

14 R.W. Jaszewski, H. Schift, P. Gröning, G. Margaritondo, Properties of thin anti-adhesive films used for the replication of microstructures in polymers Microelectronic Engineering 35 1997, 381-384

15 R.W. Jaszewski, H. Schift, B. Schnyder, A. Schneuwly, P. Gröning, The deposition of anti-adhesive ultra thin teflon-like films and their interaction with polymers during hot embossing Applied Surface Science 143 1999, 301-308

16 W.-C. Jung, Y.-M. Heo, G.-S. Yoon, K.-H. Shin, S.-H. Chang, G.-H. Kim, M.-W. Cho, Micro machining of injection mold inserts for fluidic channel of polymeric biochips Sensors 7 2007, 1643-1654

17 D.-Y. Khang, H. Kang, T.-I. Kim, H.H. Lee, Low-pressure nanoimprint lithography Nano Letters 4 4 2004, 633-637

18 N.Y. Lee, Y.S. Kim, A poly(dimethysiloxane)-coated flexible mold for nanoimprint lithography Nanotechnology 18 2007, 415303-

19 F. Lazzarino, C. Gourgon, P. Schiavone, C. Perret, Mold deformation in nanoimprint lithography J. Vac. Sci. Technol B 22 6 2004, 3318-3322

20 H. Li, X. Lai, C. Li, J. Feng, J. Ni, Modelling and experimental analysis of the effects of tool wear, minimum chip thickness and micro tool geometry on the surface roughness in micro-end-milling Journal of Micromechanics and Microengineering 18 2008, 025006-

21 C. Khan Malek, J.-R. Coudevylle, J.-C. Jeannot, R. Duffait, Revisiting micro hot embossing with moulds in non-conventional materials Microsystem Technologies 13 5 2006, 475-481

22 C. Mehne, R. Steger, P. Koltay, D. Warkentin, M.P. Heckele, Large-area polymer microstructure replications through the hot embossing process using modular moulding tools Proc. IMechE Part B: Journal Engineering Manufacture 222 2008, 93-99

23 Ch. Mehne. Grossformatige Abformung mikrostrukturierter Formeinsätze durch Heissprägen. PhD thesis, University of Karlsruhe (TH), Institute for Microstructure Technology, 2007.

24 M. Mekaru, T. Yamada, S. Yan, T. Hattori, Microfabrication by hot embossing and injection molding at LASTI Microsystem Technologies 10 2004, 682-688

25 J. Narasimhan, I. Papautsky, Polymer embossing tools for rapid prototyping of plastic microfluidic devices Journal of Micromechanics and Microengineering 14 2004, 96-103

26 H. Niino, X. Ding, R. Kurosaki, A. Narazaki, T. Sato, Y. Kawaguchi, Imprinting by hot embossing in polymer substrates using a template of silica glass surface-structured by the ablation of LIBWE method Applied Physics A 79 2004, 827-828

27 W. Pfleging, W. Bernauer, T. Hanemann, M. Torge, Rapid fabrication of microcomponents—UV-laser assisted prototyping, laser micro-machining of mold inserts and replication via photomolding Microsystem Technologies 9 2002, 67-74

28 G.M. Robinson, M.J. Jackson, M.D. Whitfield, A review of machining theory and tool wear with a view to developing micro and nano machining processes Journal Mater. Sci. 42 6 2007, 2002-2015

29 N. Roos, H. Schulz, L. Bendfeldt, M. Fink, K. Pfeiffer, H.-C. Scheer, First and second generation purely thermoset stamps for hot embossing Microelectronic Engineering 61–62 2002, 399-405

30 A.P. Russo, D. Apoga, N. Dowell, W.A. Shain, M.P. Turner, H.G. Craighead, H.C. Hoch, J.N. Turner, Microfabricated plastic devices from silicon using soft intermediates Biomedical Microdevices 4 2002, 277-283

31 A. Schoth, R. Forster, W. Menz, Micro wire EDM for high aspect ratio 3D microstructuring of ceramics and metals Microsystem Technologies 11 4–5 2005, 250-253

32 P.P. Shiu, G.K. Knopf, M. Ostojic, S. Nikumb, Rapid fabrication of tooling for microfluidic devices via laser micromachining and hot embossing Journal of Micromechanics and Microengineering 18 2008, 025012-

33 A. J. Waddie, M. R. Taghizadeh, J. Mohr, V. Piotter, Ch. Mehne, A. Stuck, E. Stijns, and H. Thienpont. Design, fabrication and replication of microoptical components for educational purposes within the network of excellence in micro optics (NEMO). In SPIE Proceedings Series No. 6185, 2004.

34 M. Worgull, M. Heckele, W. Schomburg, Large scale hot embossing Microsystem Technologies 12 2005, 110-115

35 C.-H. Wu, C.-H. Lu, Fabrication of an LCD light guiding plate using closed-die hot embossing Journal of Micromechanics and Microengineering 18 2008, 035006-

36 D. YaoR, R. Kuduvar-Raman-Thanumoorthy, An enlarged process window for hot embossing Journal of Micromechanics and Microengineering 18 2008, 045023-