Chapter 1. Getting Started with the Galileo

You've chosen Intel's new Galileo processor board and you are ready to start some amazing projects. However, you might be new to this kind of processor, or you might have used another similar processor but not the Galileo. This book is designed to lead you step-by-step through a number of examples that will provide you with the knowledge you need to access the power of the Galileo. You'll also learn how to add additional hardware to sense the world around you, display information, and even control motors or servos.

In this chapter, you'll start by unpacking and connecting the Galileo to your host machine, then you'll learn how to use the Galileo from your remote computer. If you know how to use Mac or Linux machines, this chapter will show you how to use them. You'll take a peek into the internals of the Galileo and learn about the Linux machine hiding behind the simple Galileo exterior.

For this chapter, the objectives are as follows:

  • Unpacking and connecting the Galileo to a host computer
  • Loading and configuring the Galileo IDE, based on the Arduino IDE
  • Downloading and running some simple example programs
  • Taking a peek at the Linux machine at the heart of the Galileo

Unpacking and connecting the Galileo

The Galileo is packaged with a power cable. Here is a picture of the board:

Unpacking and connecting the Galileo

This is how the board will look without the adapter:

Unpacking and connecting the Galileo

Note

This particular Galileo is a Gen 2 board. This version is a slightly improved version of the original Gen 1 board, and has a few connector changes. The examples in this book have been tested on both versions, and should work unless noted.

The power connection is very straightforward. However, you'll also need another cable to start working with the Galileo. This is a USB-to-micro USB cable. Here is a picture:

Unpacking and connecting the Galileo

This cable will go between the Galileo and the host machine to develop and debug the code. Here are the specific connections:

Unpacking and connecting the Galileo

To prepare for developing the Galileo, plug the power into an outlet and the board. A green power LED close to the USB connector should light. Now you are ready to connect your board to a remote computer to begin programming The next sections will cover how to connect your Galileo to a computer running Windows, OS X, or Linux.

..................Content has been hidden....................

You can't read the all page of ebook, please click here login for view all page.
Reset
3.137.214.194