1 3M. http://www.solutions.3m.com, 2008.
2Fresnel Optics http://www.fresnel-optics.de 2008
3 P. Abgrall, L.-N. Low, N.-T. Nguyen, Fabrication of planar nanofluidic channels in a thermoplastic by hot-embossing and thermal bonding Lab on a Chip 7 2007, 520-522
4 M. Baer. μ FEMOS Mikro-Fertigungstechniken für hybride mikrooptische Sensoren, volume 10 of ISBN 3-937300-95-3. Universitätsverlag Karlsruhe, 2006.
5 P. Binkowska, B. Cord, P. Wohlfart, Mass production of DVDs: faster, more complex but cheaper and simpler Microsystem Technologies 13 2007, 139-144
6 N. Bogdanski, H. Schulz, M. Wissen, H.-C. Scheer, J. Zajadacz, K. Zimmer, 3D-hot embossing of undercut structures—an approach to microzippers Microelectronic Engineering 73–74 2004, 190-195
7 M. Bruendel. Herstellung photonischer Komponenten durch Heissprägenund UV-induzierte Brechzahlmodifikation von PMMA. PhD thesis, University of Karlsruhe (TH), Institute for Microstructure Technology, 2008.
8 A.B.D. Cassie, S. Baxter, Wettability of porous surfaces Transactions of the Faraday Society 40 1944, 546-551
9 C.-Y. Chang, S.-Y. Yang, L.-S. Huang, J.-H. Chang, Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon mold Infrared Physiscs & Technology 48 2006, 163-173
10 C.Y. Chang, S.Y. Yang, J.L. Sheh, A roller embossing process for rapid fabrication of microlens arrays on glass substrates Microsystem Technologies 12 2006, 754-759
11 C.L. Chen, F. Jen, Fabrication of polymer splitter by micro hot embossing technique Tamkang Journal of Science and Engineering 7 1 2004, 5-9
12 C.H. Chien, Z.P. Chen, Fabrication of light guiding plate of double-sided hot-embossing Materials and Science Forum 505–507 2006, 211-216
13 Ch.-G. Choi, Fabrication of optical waveguides in thermosetting polymers using hot embossing Journal of Micromechanics and Microengineering 14 2004, 945-949
14 A. Gerlach, G. Knebel, A.E. Guber, M. Heckele, D. Herrmann, A. Muslija, Th. Schaller, Microfabrication of single-use plastic microfluidic devices for high-throughput screening and DNA analysis Microsystem Technologies 7 2002, 265-268
15 A.E. Guber, M. Heckele, D. Herrmann, A. Muslija, V. Saile, L. Eichhorn, T. Gietzelt, W. Hoffmann, P.C. Hauser, J. Tanyanyiwa, A. Gerlach, N. Gottschlich, G. Knebel, Microfluidic lab-on-a-chip systems based on polymers—fabrication and application Chemical Engineering Journal 101 2004, 447-453
16 M. Han, D.-H. Hyun, H.-H. Park, S.S. Lee, C.-H. Kim, C.G. Kim, A novel fabrication process for out-of-plane microneedle sheets of biocompatible polymer Journal of Micromechanics and Microengineering 17 2007, 1184-1191
17 M. Heckele, F. Anna, Hot embossing of microstructures with integrated conduction paths for the production of lab-on-chip systems Design, Test, Integration and Packaging of MEMS/MOEMS, Proceedings of SPIE 4755 2002
18 M. Heckele, A.E. Guber, R. Truckenmueller, Replication and bonding techniques for integrated microfluidic systems Microsystem Technologies 12 2006, 1031-1035
19 M. Heckele, M. Worgull, P. Fugier, J. Gavillet, G. Tosello, H. H. Hansen, T. Metz, and P. Koltay. Micro- and nanostructured surfaces for the passive liquid and gas management in microfluidic structures. In 3rd Internat. Conf. on Multi-Material Micro Manufacture (4M2007), October 2007.
20 A. Kees, Schouhamer Immink, The CD story Journal of the AES 1998
21 S.C. Kaiser. Entwicklung eines magnetisch-induktiven Mikroventils nach dem AMANDA Verfahren. PhD thesis, University of Karlsruhe (TH), Institute for Microstructure Technology (IMT), 2000.
22 J.T. Kim, K.B. Yoon, C.-G. Choi, Passive alignment method of polymer PLC devices by using a hot embossing technique IEEE Photonics Technology Letters 16 7 2004, 1664-1666
23 S.H. Kim, K.-D. Lee, J.-Y. Kim, M.-K. Kwon, S.-J. Park, Fabrication of photonic crystal structures on light emitting diodes by nanoimprint lithography Nanotechnology 18 2007, 1-5
24 M.T. Koesdjojo, Y.H. Tennico, V.T. Remcho, Fabrication of a microfluidic system for capillary electrophoresis using a two-stage embossing technique and solvent welding on poly(methymethacrylate) with water as a sacrificial layer Analytical Chemistry 80 7 2008, 2311-2318
25 J. Kouba, M. Kubenz, A. Mai, G. Ropers, W. Eberhardt, B. Loechel, Fabrication of nanoimprint stamps for photonic crystals Journal of Physics: Conference Series 34 2006, 897-903
26 D. Krabe and W. Scheel. Optical interconnects by hot embossing for module and PCB technology—the EOCB approach. In Proc. of 49th Electronic Components and Technology Conference, pages 1164–1166, San Diego, CA, USA, 1999.
27 L.J. Kricka, P. Fortina, N.J. Panaro, P. Wilding, G. Alonso-Amigo, H. Becker, Fabrication of plastic microchips by hot embossing Lab on a Chip 2 2002, 1-4
28 A. Last and J. Mohr. Fehllicht in LIGA Spektrometern. PhD thesis, University of Karlsruhe (TH), Institute for Microstructure Technology, FZKA Report 6885, 2002.
29 P.W. Leech, R.A. Lee, T.J. Davis, Printing via hot embossing of optically variable images in thermoplastic acrylic lacquer Microelectronic Engineering 83 2006, 1961-1965
30 S. Lehmacher, A. Neyer, Integration of polymer optical waveguides into printed circuit boards Electronics Letters 36 12 2000, 1052-1053
31 K. F. Lei, R. H. W. Lam, J. H. M. Lam, and W. J. Li. Polymer based vortex micropump fabricated by micro molding replication technique. In Proceedings of 2004 IEEE/RJS International Conference on Intelligent Robots and Systems, pages 1740–1745, September 2004.
32 D. Maas, B. Büstgens, J. Fahrenberg, W. Keller, and D. Seidel. In Proceedings ACTUATOR94, pages 75–78, Bremen, Germany, 1994.
33 W. Menz, J. Mohr, Mikrosystemtechnik für Ingenieure 2nd edition 1997 VCH Verlagsgesellschaft ISBN 3-527-29405-8
34 H. Mizuno, O. Sugihara, T. Kaino, N. Okamoto, M. Hosino, Low-loss polymeric optical waveguides with large cores fabricated by hot embossing Optics Letters 28 23 2003, 2378-2380
35 S.-D. Moon, N. Lee, S. Kang, Fabrication of a microlens array using micro-compression molding with an electroformed mold insert Journal of Micromechanics and Microengineering 13 2003, 98-103
36 S.J. Moon, S.S. Lee, H.S. Lee, T.H. Kwon, Fabrication of microneedle array using LIGA and hot embossing process Microsystem Technologies 11 2005, 311-318
37 C.-J. Moran-Iglesias, J. Mohr, and A. Last. Grossflächige quasi freistrahloptische Mikrospektrometer. PhD thesis, University of Karlsruhe (TH), Institute for Microstructure Technology, FZKA Report 7211, 2002.
38 S.H. Ng, Z.F. Wang, Hot roller embossing for the creation of microfluidic devices Proceedings of DTIP Conference 2008 2008 EDA Publishing Nice, France
39 F. Sammoura, Y.-C. Su, Y. Cai, C.-Y. Chi, B. Elamaran, L. Lin, J.-C. Chiao, Plastic 95-GHz rectangular waveguides by micro molding technologies Sensors and Actuators A 127 2006, 270-275
40 H. Schift, S. Park, B. Jung, C.-G. Choi, C.-S. Kee, S.-P. Han, K.-B. Yoon, J. Gobrecht, Fabrication of polymer photonic crystals using nanoimprint lithography Nanotechnology 16 2005, 261-265
41 J. Seekamp, S. Zankovych, A.H. Helfer, P. Maury, C.M. Sotomayor Torres, G. Böttger, C. Liguda, M. Eich, B. Heidari, L. Montelius, J. Ahopelto, Nanoimprinted passive optical devices Nanotechnology 13 2002, 581-586
42 P. Shao, Z. Rummler, W.K. Schomburg, Polymer micro piezo valve with a small dead volume Journal of Micromechanics and Microengineering 14 2004, 305-309
43 G. Sharpless, CD and DVD disc manufacturing. Deluxe Global Media Services www.distronics.com 2003
44 Ch. Solf. Entwicklung von miniaturisierten Forurier-Transformations – Spektrometern und ihre Herstellung mit dem LIGA-Verfahren. PhD thesis, University of Karlsruhe (TH), Institute for Microstructure Technology, FZKA Report 6964, 2004.
45 L.H. Thamdrup, A. Klukowska, A. Kristensen, Stretching DNA in polymer nanochannels fabricated by thermal imprint in PMMA Nanotechnology 19 2008, 125301-
46 C.-J. Ting, M.-C. Huang, H.-Y. Tsai, C.-P. Chou, C.-C. Fu, Low cost fabrication of large-area anti-reflection films from polymer by nanoimprint/hot-embossing technology Nanotechnology 19 2008, 1-5
47 R. Ulrich, H.P. Weber, E.A. Chandross, W.J. Tomlinson, E.A. Franke, Embossed optical waveguides Applied Physical Letters 20 6 1972, 213-215
48 A. J. Waddie, M. R. Taghizadeh, J. Mohr, V. Piotter, Ch. Mehne, A. Stuck, E. Stijns, and H. Thienpont. Design, fabrication and replication of microoptical components for educational purposes within the network of excellence in micro optics (nemo). In SPIE Proceedings Series No. 6185, 2004.
49 M. Worgull, M. Heckele, T. Mappes, B. Matthis, G. Tosello, T. Mctz, J. Gavillet, P. Koltay, and H. N. Hansen. Sub-μ structured lotus surfaces manufacturing. In Conference of Design, Integration and Packaging (DTIP), Nice, France, April 2008.
50 Y. Zhao, T. Cui, Fabrication of high-aspect-ratio polymer-based electrostatic comb drives using the hot embossing technique Journal of Micromechanics and Microengineering 13 2003, 430-435
51 K.B. Yoon, C.-G. Choi, S.-P. Han, Fabrication of multimode polymeric waveguides by hot embossing lithography Japanese Journal of Applied Physics 43 6A 2004, 3450-3451
52 P. Zhang, G. Londe, J. Sung, E. Johnson, M. Lee, H.J. Cho, Microlens fabrication using an etched glass master Microsystem Technologies 13 2007, 339-342
18.216.47.169