References

1AHahn-Schickard-Gesellschaft für angewandte Forschung e.V., Institut für Mikroaufbautechnik http://www.hsg-imat.de/ 2008

2 B. Rapp, M. Worgull, M. Heckele, A. Guber, D. Herrmann, Mikro-Heissstanzen–Erzeugung von Durchlochstrukturen in ebenen Kunststoffsubstraten Conference in Microsystem Technology 2005 Freiburg i. Br. Germany

3 N. Bogdanski, H. Schulz, M. Wissen, H.-C. Scheer, J. Zajadacz, K. Zimmer, 3D-hot embossing of undercut structures–an approach to microzippers Microelectronic Engineering 73–74 2004, 190-195

4 B. L. Carvalho, E. A. Schilling, N. Schmid, and G. J. Kellog. Soft embossing of microfluidic devices. In Proceedings of 7th International Conference on Miniaturized Chemical and Biochemical Analysis Systems, pages 959–962, Squaw Valley, California, USA, 2003.

5 M.B. Chan-Park, W.K. Neo, Ultraviolet embossing for patterning high aspect ratio polymeric microstructures Microsystem Technologies 9 2003, 501-506

6 C.-Y. Chang, S.-Y. Yang, L.-S. Huang, J.-H. Chang, Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon mold Infrared Physics & Technology 48 2006, 163-173

7 C.Y. Chang, S.Y. Yang, J.L. Sheh, A roller embossing process for rapid fabrication of microlens arrays on glass substrates Microsystem Technologies 12 2006, 754-759

8 J.H. Chang, S.-Y. Yhang, Gas pressurized hot embossing for transcription of micro features Microsystem Technologies 10 2003, 76-80

9 R.-D. Chien, Hot embossing of microfluidic platform International Communications in Heat and Mass Transfer 33 2006, 645-653

10 G.L.W. Cross, B.S. O'Connell, H.O. Özer, J.B. Pethica, Room temperature mechanical thinning and imprinting of solid films Nano Letters 7 2 2007, 357-362

11 P. Datta, J. Goettert, Method for polymer hot embossing process development Microsystem Technologies 13 2006, 265-270

12 M. Heckele and F. Anna. Hot embossing of microstructures with integrated conduction paths for the production of lab-on-chip systems. In Proceedings of Spie – DTIP Conference, volume-nr 4755, pages 670–674, Cannes, France, 2002.

13 Y. Huang, G.T. Paloczi, J. Scheuer, A. Yariv, Soft lithography replication of polymeric microring optical resonators Optics Express 11 20 2003, 2452-2458

14 L.-T. Jiang, T.-C. Huang, C.-Y. Chang, J.-R. Ciou, S.-Y. Yang, P.-H. Huang, Direct fabrication of rigid microstructures on a metallic roller using a dry film resist Journal of Micromechanics and Microengineering 18 2008, 015004-

15 C.-H. Lin, R. Chen, Ultrasonic nanoimprint lithography: a new approach to nanopatterning Journal of Microlith. Microfab. Microsyst. 5 2006, 011003-

16 C.-H. Lin, R. Chen, Effects of mold geometries and imprinted polymer resist thickness on ultrasonic nanoimprint lithography Journal of Micromechanics and Microengineering 17 2007, 1220-1231

17 S.-J. Liu, Y.-C. Chang, A novel soft-mold roller embossing method for the rapid fabrication of micro-blocks onto glass substrates Journal of Micromechanics and Microengineering 17 2007, 172-179

18 C. Khan Malek, J.-R. Coudevylle, J.-C. Jeannot, R. Duffait, Revisiting micro hot embossing with moulds in non-conventional materials Microsystem Technologies 13 2007, 475-481

19 Ch. Mehne. Grossformatige Abformung mikrostrukturierter Formeinsätze durch Heissprägen. PhD thesis, University of Karlsruhe, Institute for Microstructure Technology, 2007.

20 H. Mekaru, O. Nakamura, O. Maruyama, R. Maeda, T. Hattori, Development of precision transfer technology of atmospheric hot embossing by ultrasonic vibration Microsystem Technologies 13 2006, 385-391

21 A. Michel, R. Ruprecht, M. Harmening, and W. Bacher. Abformung von Mikrostrukturen auf prozessierten Wafern. Scientific report FZKA 5171. Forschungszentrum Karlsruhe, 1993.

22 K.-D. Mueller. Herstellung von beweglichen metallischen Mikrostrukturen auf Siliziumwafern. Scientific report FZKA 6254. Forschungszentrum Karlsruhe, 1999.

23 T. Veres, S.C. Jakeway, H.J. Crabtree, N.S. Cameron, H. Roberge, High fidelity, high yield production of microfluidic devices by hot embossing lithography: rheology and stiction Lab Chip 6 2006, 936-941

24 P. Nagarajan, D. Yao, Rubber-assisted hot embossing for structuring thin film polymeric films IMECE2006-15297, Mechanical Engineering Congress and Exposition, Chicago, Illinois 2006 ASME International

25 S.H. Ng, Z.F. Wang, Hot roller embossing for the creation of microfluidic devices Proceedings of DTIP Conference 2008 2008 EDA Publishing Nice, France

26 R.H. Pedersen, O. Hansen, A. Kristensen, A compact system for large-area thermal nanoimprint lithography using smart stamps Journal of Micromechanics and Microengineering 18 2008, 055018-

27 X. Shan, Y.C. Soh, C.W.P. Shi, C.K. Tay, K.M. Chua, C.W. Lu, Large-area patterning of multilayered green ceramic substrates using micro roller embossing Journal of Micromechanics and Microengineering 18 2008, 065007-

28 X. Shan, Y. C. Soh, C. W. P. Shi, C. K. Tay, and C. W. Lu. Large area roller embossing of multilayered ceramic green composites. In Proc. of DTIP-Conference, Nice/France, 2008.

29 H. Tan, A. Gilbertson, S.Y. Chou, Roller nanoimprint lithography Journal Vac. Sci. Technol. B 16 6 1998, 3926-3928

30 M. Tormen, A. Carpentiero, E. Ferrari, D. Cojoc, E. Di, Fabrizio. Novel fabrication method for three-dimensional nanostructuring: an application to micro-optics Nanotechnology 18 2007, 385301-

31 R. Truckenmüller, Z. Rummler, Th. Schaller, and W. K. Schomburg. Low-cost production of single-use polymer capillary electrophoresis structures by microthermoforming. In 12th Micromechanics Europe Workshop (MME), pages 39–42, Cork, Ireland, 2001.

32 R. Truckenmüller, Z. Rummler, Th. Schaller, W.K. Schomburg, Low-cost thermoforming of micro fluidic analysis chips Journal of Micromechanics and Microengineering 12 2002, 375-379

33 A. Vijayaraghavan, S. Hayse-Gregson, R. Valdez, and D. Dornfeld. Analysis of process variable effects on the roller imprinting process. Technical report, Laboratory for Manufacturing and Sustainability, Green Manufacturing Group, University of Califonia, Berkeley, 2008.

34 S.-Y. Yang, F.-S. Cheng, S.-W. Xu, P.-H. Huang, T.-C. Huang, Fabrication of microlens arrays using UV micro-stamping with soft roller and gas pressurized platform Microelectronic Engineering 85 2008, 603-609

35 D. Yao, R. Kuduva-Raman-Thanumoorthy, An enlarged process window for hot embossing Journal of Micromechanics and Microengineering 18 2008, 045023-