Sewing Machine Feet
A variety of feet are available for most sewing machines. For most beginner-
level projects, you’ll use the standard foot (also called a zigzag foot) that comes
on your machine. As you progress and are ready to try other types of projects,
though, you’ll likely want to use the appropriate type of sewing machine foot.
The following discusses the different types and gives a short tutorial for replacing
one on your machine.
1. Overcasting foot: This foot is designed to
sew just past the edge of the fabric in a zigzag
motion and finishes the edge. The extended
part guides the edge of the fabric, while the tiny
metal guide inside holds the fabric flat. It works
great with knits!
2. Button fitting foot: This foot allows you to
sew on a two- or four-hole button. It works by
using a zigzag stitch set at zero length.
1
2
3
4
5
6
7 8
9
28 Part 1: Getting Started
ddCH2_Sewing.indd 28 5/23/13 3:36 PM
3. Invisible zipper foot: Also called a concealed
zipper foot, this foot is used specifically for invis-
ible zippers. Invisible zippers are easy to install
and are hidden under the edge of the fabric,
making them invisible from the outside.
4. Buttonhole foot: This long, rectangular foot is
designed to automatically sew buttonholes at a
variety of lengths. The button fits into the back
to determine the size.
5. Blind stitch foot: This foot is designed with
a guide to allow you to stitch a blind hem by
keeping the needle at the correct distance from
the hem. A blind hem is barely visible from the
right side of the fabric.
6. Zigzag foot: This is the standard, all-purpose
foot that comes on the machine. It has a wide
opening for the needle, which can accommo-
date a variety of stitch styles.
7. Zipper foot: This foot is used to insert all types
of zippers; it’s designed to allow the needle to
sew right along raised zipper teeth. You can also
use it to insert piping.
8. Monogramming foot: This foot is used to
create monograms by using the free-motion
sewing technique. It has a clear area that allows
you to see the stitching under the foot as you
sew.
9. Cording foot: This foot has small groves in it
to guide the trim and keep it exactly where you
want it. It works with both a straight or zigzag
stitch.
Raise the presser foot. Push the button or lever
on the back to release the foot.
Slide the foot out. Position the new foot just
under the presser foot holder, and lower to attach.
1
2
29Chapter 2: Know Your Machine
Back view of the machine.
ddCH2_Sewing.indd 29 5/23/13 3:36 PM
..................Content has been hidden....................

You can't read the all page of ebook, please click here login for view all page.
Reset
54.205.116.187