3
4
Slide pins into the fabric along the seam edge,
down through both layers, and back up through
the top. Pin every few inches to hold the fabric in
place.
Line up the edge of the fabric with the
5
⁄
8
-inch
(1.5 cm) seam marking on the throat plate. With
the stitch selection set to straight, begin sewing a
straight line.
5 6
When you’ve sewn a straight line along the entire
length of the piece, you’ve created the seam. Be
sure to backstitch at the beginning and at the end
to secure your stitching.
Open up the fabric and lay it flat with the right
side facedown. Use an iron to open the seam and
press it flat.
49Chapter 4: Seams and Hems
This area is called the
seam allowance.
You can see the right
side of fabric showing in
the seam allowance and
the wrong side of fabric
showing on the left and
right.
Remove the pin just before it reaches the foot.
Sewing on a pin can break your needle!
5
/
8
-inch (1.5 cm)
seam marking
ggCH4_Sewing.indd 49 5/23/13 3:36 PM