Table B-1. The list of HCI error reasons.
REASON |
DESCRIPTION | |
---|---|---|
1 |
|
Unknown HCI Command |
2 |
|
No Connection |
3 |
|
Hardware Failure |
4 |
|
Page Timeout |
5 |
|
Authentication Failure |
6 |
|
Key Missing |
7 |
|
Memory Full |
8 |
|
Connection Timeout |
9 |
|
Max Number Of Connections |
10 |
|
Max Number Of SCO Connections To A Device |
11 |
|
ACL connection already exists |
12 |
|
Command Disallowed |
13 |
|
Host Rejected due to limited resources |
14 |
|
Host Rejected due to security reasons |
15 |
|
Host Rejected due to remote device being only a personal device |
16 |
|
Host Timeout |
17 |
|
Unsupported Feature or Parameter Value |
18 |
|
Invalid HCI Command Parameters |
19 |
|
Other End Terminated Connection: User Ended Connection |
20 |
|
Other End Terminated Connection: Low Resources |
21 |
|
Other End Terminated Connection: About to Power Off |
22 |
|
Connection Terminated by Local Host |
23 |
|
Repeated Attempts |
24 |
|
Pairing Not Allowed |
25 |
|
Unknown LMP PDU |
26 |
|
Unsupported Remote Feature |
27 |
|
SCO Offset Rejected |
28 |
|
SCO Interval Rejected |
29 |
|
SCO Air Mode Rejected |
30 |
|
Invalid LMP Parameters |
31 |
|
Unspecified Error |
32 |
|
Unsupported LMP Parameter Value |
33 |
|
Role Change Not Allowed |
34 |
|
LMP Response Timeout |
35 |
|
LMP Error Transaction Collision |
36 |
|
LMP PDU Not Allowed |
37 |
|
Encryption Mode Not Acceptable |
38 |
|
Unit Key Used |
39 |
|
QoS is Not Supported |
40 |
|
Instant Passed |
41 |
|
Pairing with Unit Key Not Supported |
42 |
|
Reserved for Future Use |
18.226.187.233