Table A-1. The list of LMP error reasons.
REASON |
DESCRIPTION | |
---|---|---|
1 |
|
Authentication Failure |
2 |
|
Key Missing |
3 |
|
Max Number Of SCO Connections To A Device (The maximum number of SCO connections to a particle device has been reached. All allowed SCO connection handles to that device are used.) |
4 |
|
Host Rejected due to limited resources (The host at the remote side has rejected the connection because the remote host did not have enough additional resources to accept the connection.) |
5 |
|
Host Rejected due to security reasons (The host at the remote side has rejected the connection because the remote host determined that the local host did not meet its security criteria.) |
6 |
|
Host Rejected due to remote device is only a personal device (The host at the remote side has rejected the connection because the remote host is a personal device and will only accept the connection from one particle remote host.) |
7 |
|
Host Timeout (Used at connection accept timeout, the host did not respond to an incoming connection attempt before the connection accept timer expired.) |
8 |
|
Other End Terminated Connection: User Ended Connection |
9 |
|
Other End Terminated Connection: Low Resources |
10 |
|
Other End Terminated Connection: About to Power Off |
11 |
|
Connection Terminated by Local Host |
12 |
|
Repeated Attempts (An authentication or pairing attempt is made too soon after a previously failed authentication or pairing attempt.) |
13 |
|
Pairing Not Allowed |
14 |
|
Unknown LMP PDU |
15 |
|
Unsupported LMP Feature |
16 |
|
SCO Offset Rejected |
17 |
|
SCO Interval Rejected |
18 |
|
SCO Air Mode Rejected |
19 |
|
Invalid LMP Parameters |
20 |
|
Unspecified Error |
21 |
|
Unsupported parameter value |
22 |
|
Switch not allowed |
23 |
|
LMP Error Transaction Collision |
24 |
|
PDU not allowed |
25 |
|
Encryption mode not acceptable |
26 |
|
Unit key used |
27 |
|
QoS not supported |
28 |
|
Instant passed |
29 |
|
Pairing with unit key not supported |
3.139.108.22