Let's look at how to deploy Blynk libraries:

1. You can deploy the Blynk libraries on Raspberry Pi by running the following commands:

pi@raspberrypi:~/wiringPi $ cd
pi@raspberrypi:~ $ git clone https://github.com/blynkkk/blynk-library.git

Refer to the following screenshot:

2. After cloning the git repository, move to the linux directory:

pi@raspberrypi:~ $ cd blynk-library/linux

3. Then build the library from source by targeting Raspberry Pi:

pi@raspberrypi:~/blynk-library/linux $make clean all target=raspberry

4. This command will output the Blynk file that will be used to connect to the Blynk server: