best to you. Then go back and solder those
caps into the other switch positions, leaving one
position unused for the bypass setting.
To make the holes in the can for the jacks and
switch, use a step drill (Figure
E
). It won’t grab
like a twist drill and you’ll get a cleaner hole.
I mounted the mini alligator clips onto a
small piece of plastic strip (Figure
F
). Using a
soldering iron as a heat source, I softened and
bent the sides of the strip to make two ears. Two
small magnets, super-glued to the ears, hold the
strip in place inside the bottom of the salsa can
(Figure
G
).
Now: plug in, “tone” on, and rock out!
91
make.co
A
B
C D E
GF
BOB KNETZGER is a designer/
inventor/musician whose award-
winning toys have been featured on
The Tonight Show, Nightline, and Good
Morning America. He is the author of Make: Fun!,
available at makershed.com and fine bookstores.
Larry Chung
M78_090-91_TIN_F1.indd 91M78_090-91_TIN_F1.indd 91 7/11/21 10:25 AM7/11/21 10:25 AM
..................Content has been hidden....................
You can't read the all page of ebook, please click here login for view all page.