Chapter 21
In This Chapter
Automatically bulleting or numbering text
Building a multilevel list
Numbering lines on a page
Adding a TOC to your document
Creating an index
Using footnotes and endnotes
Lists can be simple, such as a list of the various diets you’ve tried over the past years. Lists can be complex, such as a table of contents, an index, and other more professional listy things. In Word, you can type such lists manually, but it’s better to use the proper tools. That way, a list of anything can be formatted automatically and updated as necessary. Add that tip to your list of timesavers.
Whenever you have more than two items to describe in your document, consider using one of Word’s automatic list-formatting commands. These tools format the list in a way that draws attention, calling it out from the rest of your text.
In typesetting, a bullet is a graphical element, such as a ball or a dot, which highlights items in a list. The word bullet comes from the French word boulette, which has more to do with food than with round pieces of lead quickly exiting a firearm, like this:
To apply bullets to your text, highlight the paragraphs you want to shoot and click the Bullets button, shown in the margin. Instantly, your text is not only formatted with bullets but also indented and made all neat and tidy.
For a list of numbered items, just write the text. Don’t write the numbers at the start of each paragraph. Then, after the list is complete, select the paragraphs as a block and click the Numbering command button, shown in the margin. The Numbering command assigns a number to each paragraph, plus it formats the paragraphs with a hanging indent, which looks nice.
The paragraph numbering continues (it’s a format) until you turn it off. To do so, either press the Enter key twice or click the Numbering command button again.
As a bonus, if you insert or rearrange paragraphs in the list, Word automatically renumbers everything. That makes this feature better than trying to manually number and format the paragraphs.
A multilevel list consists of items and subitems all properly indented, similar to those presented in Figure 21-1. Word automatically formats such a list, but it’s a tricky thing to do. Pay attention!
To format a multilevel list, click the Multilevel List button, shown in the margin. Start typing the list. Press the Tab key to indent and create a sublevel. Press Shift+Tab to unindent and promote an item to a higher level.
You can also write the entire list in advance, select it, and then click the Multilevel List button to format it. As long as you use Tab and Shfit+Tab to organize the topics, you won’t break the format and the list stays intact.
Word lets you slap down numbers for every line on a page, a popular feature with those in the legal profession. Here's how it goes:
For example, to number lines on each page 1 through whatever, chose the Restart Each Page option. Or to number all lines on all pages cumulatively, choose Continuous.
To remove the line numbers, choose None from the Line Numbers command button. Or choose Suppress for Current Paragraph if you don’t want the selected paragraph numbered.
Word helps you build lists of items in your document, lists that would otherwise be brutally cumbersome to create and monstrous to maintain. These lists include a table of contents and an index.
The trick to creating a tablet of contents, or TOC, for your document is to use Word’s Heading styles. Use Heading 1 for main heads, Heading 2 for subheads, and Heading 3 for lower-level heads and titles. Word’s Table of Contents command uses those formats to build a table of contents field, which reflects the heading names and their page numbers.
Providing that you’ve used the Heading (or equivalent) styles in your document, follow these steps to create a table of contents:
Create a separate page for the TOC.
Word places the TOC field at the insertion pointer’s location, though I prefer to have the thing on its own page. Refer to Chapter 13 for information on creating pages; a blank page near the start of your document is ideal for a TOC.
Click the mouse to place the insertion pointer on the blank page.
The TOC field is inserted at that point.
In the Table of Contents group, click the Table of Contents button.
The Table of Contents menu appears.
Choose a format.
The TOC is created and placed in your document, page numbers and all.
Above the TOC, you may also want to add a title — something clever, such as Table of Contents. Do not format that title as a heading unless you want it included in the table of contents.
An index is yet another document reference or list Word can build and format, providing that you know the trick: You must mark text in a document for inclusion in the index. Once the words are marked, an index field is inserted, which displays the index.
To flag a bit of text for inclusion in an index, follow these steps:
Select the text you want to reference.
The text can be a word or a phrase or any old bit of text.
On the References tab in the Index group, click the Mark Entry button.
The selected text appears in the Mark Entry dialog box.
If the entry needs a subentry, type that text in the Mark Index Entry dialog box.
The subentry further clarifies the main entry. For example, the word you select (the main entry) might be boredom and you type In a waiting room as the subentry.
Click one of the buttons, either Mark or Mark All.
Click the Mark button to mark only the selected text. Click the Mark All button to direct Word to include all matching instances of the text in your document.
When you mark an index entry, Word activates the Show/Hide command, where characters such as spaces, paragraph marks, and tabs appear in your document. Don’t let it freak you out.
Because Show/Hide is on, the Index code appears in the document. It looks something like this: {@@dmsXE@@dms”boredom”@@dms}.
Continue scrolling your document and looking for items to place in the index.
The Mark Index Entry dialog box remains open as you continue to build the index.
Press Ctrl+Shift+8 to cancel the Show/Hide command.
Use the 8 key on the keyboard, not on the numeric keypad.
After marking bits and pieces of text for inclusion in the index, the next step is to build and place the index. Do this:
Position the insertion pointer where you want the index to appear.
If you want the index to start on a new page, create a new page in Word (see Chapter 13). I also recommend putting the index at the end of your document, which is what the reader expects.
In the Index group, click the Insert Index button.
The Index dialog box appears. Here are my recommendations:
Click the OK button to insert the index into your document.
What you see is an index field, displayed using the information culled from the document. See Chapter 23 for more information on fields.
Review your index. Do it now. If you dislike the layout, press Ctrl+Z to undo and start over. Otherwise, you’re done.
If you modify your document, update the index: Click the index field. Then choose the Update Index command button from the Index group. Word updates the index to reference any new page numbers and includes freshly marked index entries.
The References tab’s groups help you insert other document lists, but only if you’ve created the list appropriately.
For example, you can create a table of figures, providing you’ve used the References tab’s Caption button. (See Chapter 22 for details.) To build the table of figures, click the Insert Table of Figures button. The process works similarly to inserting a table of contents or an index, but it works only when you’ve properly inserted the captions.
Both footnotes and endnotes contain bonus information, a clarification, or an aside to supplement text on a page. Each is marked by a superscripted number or letter in the text1.
The difference between a footnote and an endnote is in the placement: A footnote appears on the bottom of the page and an endnote appears at the end of a document. Otherwise, both references are created in a similar way:
Click the mouse so that the insertion pointer is to the immediate right of a word or text that you want the footnote or endnote to reference.
There’s no need to type the note's number; it's done automatically.
From the Footnotes group, choose either the Insert Footnote or Insert Endnote command button.
A superscripted number is inserted into the text, and you're instantly whisked to the bottom of the page (footnote) or the end of the document (endnote).
To return to where you were in the document, press Shift+F5.
The Shift+F5 keyboard shortcut returns to the previous spot in your document where you were editing.
Here are some footnote endnote notes:
3.144.244.228