II. IP Routing Protocols
by Catherine Paquet, Diane Teare
Authorized Self-Study Guide Building Scalable Cisco Internetworks (BSCI), Third Edition
- Copyright
- About the Authors
- About the Technical Reviewers
- Acknowledgments
- Foreword
- Introduction
- I. Network Architecture and Design
- 1. Network Architecture Framework and Design Models
- Converged Networks
- Cisco Intelligent Information Network
- Cisco Service-Oriented Network Architecture Framework
- Cisco Enterprise Architecture
- Cisco Hierarchical Network Model
- Cisco Enterprise Composite Network Model
- Routing and Routing Protocols Within the Enterprise Composite Network Model
- Summary
- Review Questions
- 1. Network Architecture Framework and Design Models
- II. IP Routing Protocols
- 2. Routing Principles
- 3. Configuring the Enhanced Interior Gateway Routing Protocol
- EIGRP Overview
- EIGRP Terminology and Operation
- Configuring and Verifying EIGRP
- Configuring EIGRP Authentication
- Using EIGRP in an Enterprise Network
- Verifying EIGRP Operation
- Summary
- References
- Configuration Exercise: Configuring and Tuning EIGRP
- Review Questions
- 4. Configuring the Open Shortest Path First Protocol
- OSPF Protocol Overview
- OSPF Packets
- Configuring Basic OSPF Routing
- OSPF Network Types
- Types of OSPF Networks
- Adjacency Behavior for a Point-to-Point Link
- Adjacency Behavior for a Broadcast Network
- Adjacency Behavior for a Nonbroadcast Multiaccess Network
- OSPF over Frame Relay Configuration Options
- OSPF over NBMA Topology Modes of Operation
- Selecting the OSPF Network Type for NBMA Networks
- OSPF Broadcast Mode Configuration
- OSPF Nonbroadcast Mode Configuration
- OSPF Configuration in Point-to-Multipoint Mode
- Cisco Point-to-Multipoint Nonbroadcast Mode
- Using Subinterfaces in OSPF over Frame Relay Configuration
- OSPF Mode Summary
- Displaying OSPF Adjacency Activity
- Summary
- References
- Configuration Exercise: Configuring and Examining OSPF in a Single Area
- Review Questions
- 5. Advanced Open Shortest Path First Protocol Configuration
- Types of OSPF Routers and LSAs
- Interpreting the OSPF LSDB and Routing Table
- OSPF Route Summarization
- Creating a Default Route in OSPF
- OSPF Special Area Types
- OSPF Virtual Links
- Configuring OSPF Authentication
- Summary
- References
- Configuration Exercise 5-1: Configuring OSPF for Multiple Areas and Frame Relay Nonbroadcast
- Configuration Exercise 5-2: Configuring OSPF for Multiple Areas and Frame Relay Point to Multipoint and Point to Point
- Configuration Exercise 5-3: Tuning OSPF
- Review Questions
- 6. Configuring the Integrated Intermediate System-to-Intermediate System Protocol
- Introducing IS-IS and Integrated IS-IS Routing
- IS-IS Routing Operation
- Configuring Integrated IS-IS
- Verifying IS-IS Configuration and Structures
- Summary
- Configuration Exercise: Configuring Integrated IS-IS in Multiple Areas
- Review Questions
- 7. Manipulating Routing Updates
- Using Multiple IP Routing Protocols
- Controlling Routing Update Traffic
- Configuring DHCP
- Summary
- Configuration Exercise 7-1: Configuring Basic Redistribution
- Configuration Exercise 7-2: Tuning Basic Redistribution
- Review Questions
- 8. Configuring the Border Gateway Protocol
- BGP Terminology, Concepts, and Operation
- Autonomous Systems
- BGP Use Between Autonomous Systems
- Comparison with Other Scalable Routing Protocols
- Using BGP in an Enterprise Network
- BGP Multihoming Options
- BGP Path Vector Characteristics
- When to Use BGP
- When Not to Use BGP
- BGP Characteristics
- BGP Neighbor Relationships
- IBGP on All Routers in a Transit Path
- BGP Synchronization
- BGP Tables
- BGP Message Types
- BGP Attributes
- The Route Selection Decision Process
- Configuring BGP
- Peer Groups
- Entering BGP Configuration Mode
- Defining BGP Neighbors and Activating BGP Sessions
- Shutting Down a BGP Neighbor
- Defining the Source IP Address
- EBGP Multihop
- Changing the Next-Hop Attribute
- Defining the Networks That BGP Advertises
- BGP Neighbor Authentication
- Configuring BGP Synchronization
- Resetting BGP Sessions
- BGP Configuration Examples
- Verifying and Troubleshooting BGP
- Basic BGP Path Manipulation Using Route Maps
- Summary
- References
- Configuration Exercise 8-1: Configuring Multihome BGP
- Configuration Exercise 8-2: Configuring Full-Mesh IBGP
- Configuration Exercise 8-3: BGP Path Manipulation Using MED and Local Preference with Route Maps
- Review Questions
- BGP Terminology, Concepts, and Operation
- III. IP Multicast
- IV. IP Version 6
- 10. Implementing IPv6
- Introducing IPv6
- IPv6 Addressing
- IPv6 Configuration and Using OSPF and Other Routing Protocols for IPv6
- Transitioning IPv4 to IPv6
- Summary
- References
- Configuration Exercise 10-1: Configuring IPv6 Addresses and OSPF for IPv6 Routing
- Configuration Exercise 10-2: Configuring an IPv6 Tunnel
- Review Questions
- 10. Implementing IPv6
- V. Appendixes
- Acronyms and Abbreviations
- A. Answers to Review Questions
- B. Configuration Exercise Equipment Requirements and Backbone Configurations
- C. IPv4 Supplement
- IPv4 Addresses and Subnetting Job Aid
- Decimal-to-Binary Conversion Chart
- IPv4 Addressing Review
- IPv4 Access Lists
- IP Address Planning
- Hierarchical Addressing Using Variable-Length Subnet Masks
- Route Summarization
- Classless Interdomain Routing
- D. Manipulating Routing Updates Supplement
- E. BGP Supplement
- F. Summary of BSCI Router Commands
- G. Open System Interconnection (OSI) Reference Model
- Characteristics of the OSI Layers
- Protocols
- OSI Model and Communication Between Systems
- OSI Model’s Physical Layer
- OSI Model’s Data Link Layer
- OSI Model’s Network Layer
- OSI Model’s Transport Layer
- OSI Model’s Session Layer
- OSI Model’s Presentation Layer
- OSI Model’s Application Layer
- Information Formats
-
No Comment
..................Content has been hidden....................
You can't read the all page of ebook, please click here login for view all page.