Appendix B. Shortcut and Temporary Override Keys
by Beverly L. Kirkpatrick, James M. Kirkpatrick, Hossein Assadipour
AutoCAD® 2015 for Interior Design and Space Planning
- About This eBook
- Title Page
- Copyright Page
- Features of AutoCAD® 2015 for Interior Design and Space Planning
- Instructor Resources
- Preface
- Hallmark Features
- Progresses from Basic Commands to Complex Drawing Exercises
- Provides More Than 100 Exercises and Projects
- Highlights Seven Projects Appropriate for Interior Design, Space Planning, and Architecture Students
- Includes More Than 600 Figures
- Introduces the AutoCAD DesignCenter
- Covers Solid Modeling in Two Chapters
- New to This Edition
- Acknowledgments
- Hallmark Features
- Style Conventions in AutoCAD® 2015 for Interior Design and Space Planning
- Contents
- New to AutoCAD 2015
- Part One: Preparing to Draw with AutoCAD
- Chapter 1. Introducing the AutoCAD User Interface
- Introduction
- Drawing Window and Graphics Cursor
- Application Menu Button
- Major Ways to Input/Select a Command
- Ribbon
- Command Line Window (<Ctrl>+9)
- Quick Access Toolbar
- Customize Quick Access Toolbar Down Arrow and Show Menu Bar
- AutoCAD Toolbars
- User Coordinate System Icon
- Viewport Label Menus
- ViewCube
- Navigation Bar
- Infocenter
- Status Bar
- Modify and Save a Workspace
- Getting Help in AutoCAD 2015
- Close AutoCAD
- Chapter Summary
- Chapter Test Questions
- Chapter 1. Introducing the AutoCAD User Interface
- Part Two: Two-Dimensional AutoCAD
- Chapter 2. Quick-Start Tutorials: Basic Settings and Commands
- Introduction
- Following the Tutorials in This Book
- Beginning an AutoCAD Drawing
- Saving the Drawing
- Units
- Controlling Your Drawing
- Drawing Scale
- Drawing Limits and the Cartesian Coordinate System
- Grid
- GRIDDISPLAY
- Zoom
- Drafting Settings Dialog Box
- Layers
- Linetypes
- Lineweights
- Annotation Scale
- Saving the Drawing
- Using the Mouse and Right-Click Customization
- Ortho
- Drawing Lines Using the Grid Marks and Snap Increments
- Erase and Undo
- Drawing Lines Using Absolute Coordinates
- Drawing Lines Using Relative Coordinates
- Drawing Lines Using Polar Coordinates
- Drawing Lines Using Direct Distance Entry
- DYN
- Circle
- LTSCALE
- ZOOM
- PAN REALTIME
- Transparent Commands
- REDRAW
- REGEN
- HIGHLIGHT
- Move and Editing Commands Selection Set
- Grips
- UNDO and REDO
- ARC
- ELLIPSE
- DONUT
- SCALE
- Adding Text
- Command Lines of Prompt History
- Plot - Name
- Page Setup
- Printer/Plotter
- Plot to File
- Browse for Plot File...
- Plot Style Table (Pen Assignments)
- Paper Size
- Plot Area
- Plot Scale
- Annotative Property and Annotation Scale
- Plot Offset (Origin Set to Printable Area)
- Shaded Viewport Options
- Plot Options
- Drawing Orientation
- Preview...
- Chapter Summary
- Chapter Test Questions
- Chapter Projects
- Chapter 3. Drawing with AutoCAD: Conference and Lecture Rooms
- Drawing Template
- Polyline
- OFFSET
- EXPLODE
- ID Point
- TRIM
- Rectangle
- CHAMFER
- FILLET
- COPY and Osnap-Midpoint
- ROTATE
- POINT
- DIVIDE
- MEASURE
- OSNAP
- Copy, Osnap-Midpoint, Osnap-Node
- MIRROR
- Osnap Modes That Snap to Specific Drawing Features
- Running Osnap Modes
- Osnap Settings: Marker, Aperture, Magnet, Tooltip
- Solid Walls Using Polyline and Solid Hatch
- From
- BREAK
- Polyline Edit
- HATCH
- ARRAY
- Path
- ARRAYEDIT
- Distance
- Polyline
- POLYGON
- Grips—Add Vertex
- Grips—Convert to Arc
- ARRAY
- Polar Tracking
- Polyline Edit
- Tracking
- Draw the Chairs around the Conference Table
- Complete the Conference Room
- Sync my Settings
- Command Preview
- Selection Enhancements
- Chapter Summary
- Chapter Test Questions
- Chapter Projects
- Project 3-1: Rectangular Lecture Room Including Furniture [BASIC]
- Project 3-2: Curved Conference Room Including Furniture [INTERMEDIATE]
- Project 3-3: Custom Area Rug [ADVANCED]
- Project 3-4: Video Conference Room Including Furniture [BASIC]
- Project 3-5: Rectangular Conference Room Including Furniture [INTERMEDIATE]
- Project 3-6: Conference Room with Angles Including Furniture [ADVANCED]
- Chapter 4. Adding Text and Tables to the Drawing
- Chapter 5. Advanced Plotting: Using Plot Styles, Paper Space, Multiple Viewports, and PDF Files
- Layer Names, Colors, and Lineweights
- Plot Styles
- Model, Layout1, and Layout2 Tabs
- Insert an Entire Drawing into a Current Drawing
- Page Setup Manager
- Copy a Viewport
- Center and Scale the Plans
- Complete the Layout
- Viewports (VPORTS)
- Use MVIEW to Restore the Viewport VP4 into Layout1
- Page Setup Manager
- Center and Scale the Plans
- Complete the Layout
- Chapter Summary
- Chapter Test Questions
- Chapter Projects
- Chapter 6. Drawing the Floor Plan: Walls, Doors, and Windows
- The Tenant Space Project
- RECTANGLE
- HATCH
- ARRAY
- Multiline Style
- Multiline
- Edit Multiline
- EXTEND
- PROPERTIES
- LIST
- COLOR
- Linetype
- Lineweight
- Make Object’s Layer Current
- Match Properties
- Block-Make
- Wblocks
- Insert-Block
- Annotative Text
- Inserting Entire Drawings as Blocks
- Advantages of Using Blocks
- Chapter Summary
- Chapter Test Questions
- Chapter Projects
- Project 6-1: Hotel Room 2 Floor Plan [BASIC]
- Project 6-2: Wheelchair-Accessible Commercial Restroom Floor Plan [INTERMEDIATE]
- Project 6-3: Bank Floor Plan [ADVANCED]
- Project 6-4: Log Cabin Floor Plan [INTERMEDIATE]
- Project 6-5: House 1 Floor Plan [ADVANCED]
- Project 6-6: House 2 Floor Plan [ADVANCED]
- Chapter 7. Dimensioning and Area Calculations
- Eight Basic Types of Dimensions
- Dimensioning Variables
- Set the Dimensioning Variables Using the Dim: Prompt
- Set the Dimensioning Variables Using the Dimension Style Manager Dialog Box
- Fit Tab—Scale for Dimension Features
- Use Overall Scale of: (DIMSCALE)
- Annotative
- Linear and Continue Dimensioning
- Aligned Dimensioning
- Baseline Dimensioning
- Dimension Break
- Adjust Space
- DIMASSOC System Variable
- Associative Dimension Commands
- Oblique
- Align Text-Home-Angle-Left-Center-Right
- Override
- Update
- Defpoints Layer
- PROPERTIES
- Match Properties
- Grips
- Revision Cloud
- Area
- Cal
- QUICKCALC
- Chapter Summary
- Chapter Test Questions
- Chapter Projects
- Project 7-1: Hotel Room 2 Dimensioned Floor Plan [BASIC]
- Project 7-2: Wheelchair-Accessible Commercial Restroom Dimensioned Floor Plan [INTERMEDIATE]
- Project 7-3: Bank Dimensioned Floor Plan [ADVANCED]
- Project 7-4: Log Cabin Dimensioned Floor Plan [INTERMEDIATE]
- Project 7-5: House 1 Dimensioned Floor Plan [ADVANCED]
- Project 7-6: House 2 Dimensioned Floor Plan [ADVANCED]
- Chapter 8. Drawing Elevations, Sections, and Details
- Introduction
- UCS
- UCS Icon
- Mirror
- Stretch
- Prepare to Use the Hatch Command with the Add: Select Objects Boundary Option
- Hatch; Hatch and Gradient Dialog Box; Hatch Tab
- More Options
- Edit Hatch
- OTRACK
- Chapter Summary
- Chapter Test Questions
- Chapter Projects
- Project 8-1: Detail Drawing of a Bar Rail [BASIC]
- Project 8-2: Wheelchair-Accessible Commercial Restrooms Elevation [INTERMEDIATE]
- Project 8-3: Drawing a Mirror and Sections of a Mirror from a Sketch [ADVANCED]
- Project 8-4, Part 1: Log Cabin Kitchen Elevation 1 [BASIC]
- Project 8-4, Part 2: Log Cabin Kitchen Elevation 2 [BASIC]
- Project 8-5: Family Room, House 1 Elevation [ADVANCED]
- Chapter 2. Quick-Start Tutorials: Basic Settings and Commands
- Chapter 10. DesignCenter, Autodesk Seek, Dynamic Blocks, and External References
- Introduction
- The DesignCenter
- Use Block Editor to Make Dynamic Blocks
- XATTACH (Attach External Reference)
- External Reference (XREF)
- XBIND
- Features of External References
- Chapter Summary
- Chapter Test Questions
- Chapter Projects
- Project 10-1: Dynamic Block (Table and Chair) with Stretch and Move Actions [BASIC]
- Project 10-2: Dynamic Block (Bed) [BASIC]
- Project 10-3: Condo Floor Plan with External References [ADVANCED]
- Project 10-4: Log Cabin Floor Plan with External References [INTERMEDIATE]
- Project 10-5: House 1 Floor Plan with External References [ADVANCED]
- Chapter 11. Drawing the Reflected Ceiling Plan and Voice/Data/Power Plan
- Introduction
- Tenant Space Lighting Legend Symbols
- Tenant Space Reflected Ceiling Plan
- Tenant Space Voice/Data/Power Legend Symbols
- Tenant Space Voice/Data/Power Plan
- Chapter Summary
- Chapter Test Questions
- Chapter Projects
- Project 11-1: Hotel Room 2 Power/Communication/Lighting Legend and Plan [BASIC]
- Project 11-2: Wheelchair-Accessible Commercial Restroom Lighting Legend and Plan [INTERMEDIATE]
- Project 11-3, Part 1: Bank Lighting Legend and Reflected Ceiling Plan [ADVANCED]
- Project 11-3, Part 2: Bank Voice/Data/Power Legend and Plan [ADVANCED]
- Project 11-4, Part 1: Log Cabin Lighting Legend and Plan [INTERMEDIATE]
- Project 11-4, Part 2: Log Cabin Power/Communication Legend and Plan [INTERMEDIATE]
- Project 11-5: House 1 Power/ Communication/ Lighting Plan [ADVANCED]
- Project 11-6: House 2 Power/Communication/Lighting Plan [ADVANCED]
- Chapter 12. Creating Presentations with Layouts and Making a Sheet Set
- Use Create Layout Wizard to Set Up Four Viewports on a Single Sheet
- Complete the Title Block
- Use Layer Properties Manager to Freeze Viewport Layers
- Scale and Center the Plans
- Use MVSETUP to Align the Plans
- Complete the Presentation
- Make New Layout Tabs and Rename the New Layout Tabs
- Prepare the Layout Tabs for Plotting Drawings
- Use MVSETUP to Insert a Title Block
- Quick View Tools
- New Sheet Set and Sheet Set Manager
- Chapter Summary
- Chapter Test Questions
- Chapter Projects
- Chapter 13. Isometric Drawing and Gradient Hatch Rendering
- Axonometric Drawing
- Isometric Drawing
- Drafting Settings Dialog Box
- Shape 1: Drawing the Isometric Rectangle
- Shape 2: Drawing Isometric Ellipses
- Shape 3: Drawing a Chair with Ellipses That Show the Thickness of a Material
- Shape 4: Drawing a Shape That Has a Series of Isometric Ellipses Located on the Same Centerline
- Shape 5: Isometric Detail with Rounded Corners
- Shape 6: A TV Shape with an Angled Back
- Shape 7: Isometric Detail: A Hexagonal-Shaped Vase
- Dimensioning in Isometric
- Gradient Hatch
- Chapter Summary
- Chapter Test Questions
- Chapter Projects
- Project 13-1: Using Gradient Patterns to Render the Reception Desk of Exercise 13-2 [BASIC]
- Project 13-2: Tenant Space Reception Seating Area Isometric [INTERMEDIATE]
- Project 13-3: Tenant Space Conference Chair in Isometric [ADVANCED]
- Project 13-4: Log Cabin Kitchen Isometric Cutaway Drawing [ADVANCED]
- Project 13-5: Family Room, House 1 Cutaway [ADVANCED]
- Part Three: Three-Dimensional AutoCAD
- Chapter 14. Solid Modeling
- Introduction
- Solids Commands Used to Create Basic Shapes
- Solids Commands Used to Create Composite Solids
- Solids Commands Used to Edit Solids
- SOLIDEDIT
- Controlling UCS in Three Dimensions
- Commands for Viewing Solids
- SteeringWheels
- ViewCube
- Other Commands That Can Be Used to Edit Solids
- Settings That Control How the Solid Is Displayed
- Box
- Sphere
- Wedge
- Cone
- Cylinder
- Torus
- Draw an Extruded Circle
- Draw an Extruded Polygon
- Draw an Extruded Rectangle
- Draw an Extruded Structural Angle
- Draw an Extruded Shape
- Draw Revolved Shape 1
- Draw a Revolved Rectangle
- Draw a Revolved Paper Clip Holder
- ROTATE3D
- Chamfer and Fillet the Top Four Edges of Two Separate Boxes
- Chamfer and Fillet on the Top Edge of Two Separate Cylinders
- Draw Solid Shape 1
- Draw Solid Shape 2
- Union
- Subtract
- Hide
- Sweep
- Loft
- Planar Surface
- POLYSOLID
- Draw Two Extruded Shapes at Right Angles to Each Other
- Intersect
- Wblock the Intersected Model
- Complete Exercise 14-1
- Chapter Summary
- Chapter Test Questions
- Chapter Projects
- Project 14-1: Drawing Solid Models of Eight Objects [BASIC]
- Project 14-2: Drawing a Solid Model of a Lamp Table [INTERMEDIATE]
- Project 14-3: Drawing a Solid Model of the Tenant Space Reception Seating [BASIC]
- Project 14-4: Drawing a Solid Model of a Lamp and Inserting It into the Lamp Table Drawing [ADVANCED]
- Chapter 15. Advanced Modeling
- Introduction
- RENDER
- Lights
- Materials
- Other Commands Available to Render, Animate, Attach Scanned Files, and Shade 3D Models
- Chapter Summary
- Chapter Test Questions
- Chapter Projects
- Project 15-1: Make a Solid Model of the Picnic Table Shown in the Sketch. Use Render Commands to Make a Photo-Realistic Rendering of the Solid Model [BASIC]
- Project 15-2: Make a Solid Model of the Chair Shown in the Sketch. Use Render Commands to Make a Photo-Realistic Rendering of the Solid Model [INTERMEDIATE]
- Project 15-3: Make a Solid Model of the Table Shown in the Sketch. Use Render Commands to Make a Photo-Realistic Rendering of the Solid Model [ADVANCED]
- Chapter 14. Solid Modeling
- Appendix B. Shortcut and Temporary Override Keys
- Appendix C. Floor Plans and Interior Elevations of a 15-Unit Condominium Building
- Glossary
- Index
Appendix B. Shortcut and Temporary Override Keys
This appendix contains a listing of the combination of keys that can be used to perform the described actions. For example, a shortcut key shown as <Ctrl>+1 requires you to hold down the <Ctrl> key and press the 1 key while you continue to hold down the <Ctrl> key. This combination will display the Properties palette if it is not displayed or turn off the Properties palette if it is displayed.
<F1> through <F12> keys are not used in combination with other keys to perform the stated functions. Just press the key.
-
No Comment
..................Content has been hidden....................
You can't read the all page of ebook, please click here login for view all page.