Settings specific to a server are stored in the local WMI repository that is created when installing a server role. These settings are accessible from the Admin Tools MMC by right-clicking a server in the tree view pane and selecting Properties. (See Figure 15-5.)
Notice that when the Conferencing Servers are collocated, as in the case of a Standard Edition Server or Enterprise Edition pool front-end server in a consolidated configuration, the Conferencing Server settings are exposed on the Standard Edition Server or Enterprise Edition pool front-end server. The set of WMI classes exposed by Office Communications Server 2007 is listed next. These classes are explained in the Microsoft Office Communications Server 2007 SDK found at http://www.microsoft.com/downloads/details.aspx?familyid=7F4CE9C5-9E02-4B99-AA09-360D920D3EE0&displaylang=en.
The following WMI classes apply to all server roles:
MSFT_SIPServerExtData
MSFT_SIPServerInstalledComponentData
MSFT_SIPRoutingSetting
The following WMI classes apply to all server roles:
MSFT_SIPDiagnosticTracingSetting
MSFT_SIPDiagnosticFilterSetting
MSFT_SIPDiagnosticHeader
The following WMI classes apply only to Office Communications Server 2007 Standard Edition and Enterprise Edition servers:
MSFT_SIPListeningAddressData
MSFT_SIPConnectionTablesUpdateTimeSetting
The following WMI classes apply only to Standard Edition Servers and Enterprise Edition pool front-end servers:
MSFT_SIPApplicationSetting
MSFT_SIPApplicationPriorityList
The following WMI classes apply only to Standard Edition Servers and Enterprise Edition pool front-end servers:
MSFT_SIPClientVersionFilterSetting
MSFT_SIPClientVersionFilterData
SFT_SIPIIMFilterUrlFilterSetting
SFT_SIPIIMFilterFileFilterSetting
The following WMI classes can be used to configure logging settings:
MSFT_SIPLogOptions This WMI class exposes the Archiving and CDR settings on the Standard Edition Servers and Enterprise Edition pool front-end servers, as shown in the following screen shot:
MSFT_SIPLogServiceSetting This WMI class defines logging settings that are exposed on the Archiving and CDR server.
The following WMI classes apply only to Communicator Web Access servers:
MSFT_CWAServerSetting
MSFT_CWASupportedLanguage
MSFT_CWASiteSetting
The following WMI classes apply only to Edge Servers:
MSFT_SIPEdgeServerListeningAddressSetting
MSFT_SIPMediaRelaySetting
MSFT_SIPMediaRelayNetworkInterfaceData
MSFT_SIPDataProxySetting
The following WMI classes apply only to the Access Edge Servers with the exception of the class MSFT_SIPFederationInternalEdgeListeningAddressSetting. This class applies to all Edge Server roles:
MSFT_SIPFederationPartnerTable
MSFT_SIPFederationNetworkProviderTable
MSFT_SIPFederationInternalEdgeListeningAddressSetting
MSFT_SIPFederationInternalEdgeSetting
MSFT_SIPFederationInternalServerData
MSFT_SIPFederationInternalDomainData
MSFT_SIPFederationExternalEdgeListeningAddressSetting
MSFT_SIPFederationExternalEdgeSetting
MSFT_SIPFederationDeniedDomainSetting
MSFT_SIPEnhancedFederationConnectionLimitsData
MSFT_SIPEnhancedFederationDomainData
3.137.178.169