Bibliography

  1. ABS Group, Inc., Root Cause Analysis Handbook: A Guide to Effective Incident Investigation, ABS Group, Inc., Risk and Reliability Division, Rockville, MD, 1999.
  2. Akao, Y., Quality Function Deployment: Integrating Customer Requirements in Product Design, Productivity Press, Portland, OR, 1989.
  3. Altshuller, G., Creativity as an Exact Science, Gordon and Breach, New York, 1984.
  4. Anderson, N., and Wilcoxon, R., “Framework for Prognostics of Electronic Systems,” Proceedings of International Military and Aerospace/Avionics COTS Conference, Seattle, WA, August 3–5, 2004.
  5. ASQC Glossary and Tables for Statistical Quality Control, American Society for Quality Control, Milwaukee, WI, 1983.
  6. ASTM Publication STP-15D, Manual on the Presentation of Data and Control Chart Analysis, Philadelphia, PA, 1976.
  7. Bamberger, J., “Essence of the Capability Maturity Model,” Computer, June 1997, pp. 112–114.
  8. Barlow, R., and Proschan, F., Mathematical Theory of Reliability, John Wiley & Sons, New York, 1965.
  9. Barlow, R.E., and Proschan, F., Statistical Theory of Reliability and Life Testing, Holt, Rinehart & Winston, New York, 1975.
  10. Barry, R., Murcko, A.C., and Brubaker, C.E., The Six Sigma Book for Healthcare, Health Administration Press, Chicago, IL, 2002.
  11. Baxter, L.A., McConalogue, D.J., Scheuer, E.M., and Blischke, W.R., “On the tabulation of the renewal function,” Technometrics, Vol. 24, 1982, pp. 151–156.
  12. Berke, T.M., and Zaino, N.A., Jr., “Warranties: What Are They? What Do They Really Cost?” Proceedings of the Annual Reliabiability and Maintainability Symposium, 1991, pp. 326–331.
  13. Bertels, T. (ed.), Rath & Strong Six Sigma Leadership Handbook, John Wiley and Sons, Hoboken, 2003.
  14. Bhandarkar, S.M., et al., “Influence of Selected Design Variables on Thermomechanical Stress Distributions in Plated Through Hole Structures,” Transaction of the ASME—Journal of Electronic Packaging, Vol. 114, 1992, pp. 8–13.
  15. Bhattacharya, S.S., Bannerjee, S.K., Nguyen, B.-Y., and Tobin, P.J., “Temperature Dependence of the Anomalous Leakage Current in Polysilicon-on-Insulator MOSFETs,” IEEE Transactions on Electron Devices, Vol. 41(2), 1994, pp. 221–227.
  16. Black, J.R., “Physics of Electromigration,” IEEE Proceedings of International Reliability Physics Symposium, 1983, pp. 142–149.
  17. Blischke, W.R., and Murthy, D.N.P., “Product Warranty Management—I. A Taxonomy for Warranty Policies,” European Journal of Operational Research, Vol. 62, 1993, pp. 127–148.
  18. Blischke, W.R., and Murthy, D.N.P., Warranty Cost Analysis, Marcel Dekker, Inc., New York, 1994.
  19. Blischke, W.R., and Murthy, D.N.P. (eds.), Product Warranty Handbook, Marcel Dekker, Inc., New York, 1996.
  20. Blischke, W.R., and Murthy, D.N.P., Reliability: Modeling, Prediction and Optimization, John Wiley & Sons, New York, 1998.
  21. Blischke, W.R., and Scheuer, E.M., “Calculation of the cost of warranties as a function of estimated life distributions,” Naval Research Log. Quart, Vol. 22, 1975, pp. 681–696.
  22. Blischke, W.R., and Scheuer, E.M., “Applications of renewal theory in the analysis of the free -replacement warranty,” Naval Research Log. Quart, Vol. 28, 1981, pp. 193–205.
  23. Blischke, W.R., and Vij, S.-D., “Quality and warranty: Sensitivity of warranty cost models to distributional assumptions,” in S. Ghosh, W.R. Sehucany, and W.B. Smith (eds.), Statistics of Quality, pp. 361–386, Marcel Dekker, Inc., New York, 1997.
  24. Bodenhoefer, K., “Environmental Life Cycle Information Management and Acquisition—First Experiences and Results from Field Trials,” Proceedings of Electronics Goes Green 2004+, Berlin, September 5–8, 2004, pp. 541–546.
  25. Boehm, H., “Threads Cannot Be Implemented as a Library,” November 12, 2004, http://www.hpl.hp.com/techreports/2004/HPL-2004-209.pdf (accessed on November 22, 2013).
  26. Boeing, Electronic Component Management Program, Document D6-55583, 1996.
  27. Boersma, J., Loke, G., Petkova, V.T., and Sander, P.C., “Quality of Information Flow in the Backend of a Product Development Process: A Case Study,” Quality and Reliability Engineering International, Vol. 20(4), 2004, pp. 255–263.
  28. Bollinger, T.B., and McGowan, C., “A Critical Look at Software Capability Evaluations,” IEEE Software, Vol. 8(4), 1991, pp. 25–41.
  29. Bowles, J.B., “Fundamentals of Failure Modes and Effects Analysis,” Tutorial Notes Annual Reliability and Maintainability Symposium, 2003.
  30. Bowles, J.B., and Bonnell, R.D., “Failure Modes, Effects and Criticality Analysis—What Is It and How to Use It,” Tutorial Notes Annual Reliability and Maintainability Symposium, 1998.
  31. Box, G., and Luceno, A., Statistical Control by Monitoring and Feedback Adjustment, John Wiley & Sons, New York, 1997.
  32. Boyle v. United Technologies Corp., 487 U.S. 500 (1988), Hartford, CT.
  33. Brennan, J.R., Warranties: Planning Analysis and Implementation, McGraw Hill, New York, 1994.
  34. Brombacher, A.C., Reliability by Design: CAE Techniques for Electronic Components and Systems, John Wiley & Sons, New York, 1992.
  35. Brombacher, A.C., “Maturity Index on Reliability: Covering Non-Technical Aspects of IEC61508 Reliability Certification,” Reliability Engineering and System Safety, Vol. 66(2), 1999, pp. 109–120.
  36. Bromstead, J.R., and Baumann, E.D., “Performance of Power Semiconductor Devices at High Temperatures,” Transactions of the First International High Temperature Electronics Conference, Albuquerque, June, 1991, pp. 27–35.
  37. Brown, D., Kalgren, P., Byington, C., and Orsagh, R., “Electronic Prognostics—A Case Study Using Global Positioning System (GPS),” IEEE Autotestcon, 2005.
  38. Carey, S., “FAA Proposes $1.1 Million Fine Against a Southwest Air Maintenance Provider,” Wall Street Journal, September 12, 2011.
  39. Cassidy, K., Gross, K., and Malekpour, A., “Advanced Pattern Recognition for Detection of Complex Software Aging Phenomena in Online Transaction Processing Servers,” Proceedings of the International Performance and Dependability Symposium, Washington, DC, June 23–26, 2002.
  40. Castelli, J., Nash, C., Ditlow, C., and Pecht, M., Sudden Acceleration: The Myth of Driver Error, CALCE EPSC Press, University of Maryland, College Park, MD, 2003.
  41. Chan, H.A., and Englert, P.J., Accelerated Stress Testing Handbook, Guide for Achieving Quality Products, IEEE Press, New York, 2001.
  42. Chiesa, V., Coughlan, P., and Voss, C., “Development of a Technical Innovation Audit,” Journal of Product Innovation Management, Vol. 13(2), 1996, pp. 105–136.
  43. Childs, J.A., and Mosleh, A., “A Modified FMEA Tool for Use in Identifying and Addressing Common Cause Failure Risks in Industry,” Reliability and Maintainability Symposium, 1999, Proceedings Annual, January 18–19, 1999, pp. 19–24.
  44. Chukova, S., Arnold, R., and Wang, D.Q., “Warranty Analysis: An Approach to Modeling Imperfect Repairs,” International Journal of Production Economics, Vol. 89, 2004, pp. 57–68.
  45. Condra, L.W., Reliability Improvements with Design of Experiments, Marcel Dekker, Inc., New York, 2001.
  46. Crosby, P.B., Quality Is Still Free: Making Quality Certain in Uncertain Times, McGraw Hill, New York, 1996.
  47. Cushing, M.J., Mortin, D., Stadterman, T.J., and Malhotra, A., “Comparison of Electronics-Reliability Assessment Approaches,” IEEE Transactions on Reliability, Vol. 42(4), 1993, pp. 542–546.
  48. Cutter, D., and Thompson, O., “Condition-Based Maintenance Plus Select Program Survey,” Report LG301T6, January 2005, http://www.acq.osd.mil/log/mpp/cbm+/_LG301T6_FINAL.PDF (accessed January 24, 2014).
  49. Daniel Ionescu, “Apple Responds to iPhone 4 Antenna Problem,” PCWorld, June 25, 2010.
  50. Dasgupta, A., and Pecht, M., “Material Failure Mechanisms and Damage Models,” IEEE Transactions on Reliability, Vol. 40(5), 1991, pp. 531–536.
  51. Dasgupta, A., Oyan, C., Barker, D., and Pecht, M., “Solder Creep-Fatigue Analysis by an Energy-Partitioning Approach,” ASME Transactions, Journal of Electronic Packaging, Vol. 114(2), 1992, pp. 152–160.
  52. Dasgupta, A., et al., “Does the Cooling of Electronics Increase Reliability?,” Proceedings of Thermal Stresses 95 Conference, paper number: 231, 1995.
  53. Dean, J., Shirouzu, N., and Areddy, J.T., “China's Wen Cautions on Rail Push,” Wall Street Journal, July 29, 2011.
  54. Deming, W.E., Quality, Productivity and Competitive Position, Massachusetts Institute of Technology, Cambridge, MA, 1982.
  55. Denson, W., “A Tutorial: PRISM,” RAC Journal, Vol. 7(3), 1999, pp. 1–6.
  56. DoD 5000.2 Policy Document, Defense Acquisition Guidebook, Chapter 5.3—Performance Based Logistics, December 2004.
  57. Dreike, P.L., Fleetwood, D.M., King, D.B., Sprauer, D.C., and Zipperian, T.E., “An Overview of High-Temperature Electronic Device Technologies and Potential Applications,” IEEE Transactions on Components, Packaging, and Manufacturing Technology—Part A, Vol. 17(4), 1994, pp. 594–608.
  58. Dummer, G.W.A., Tooley, M.H., and Winton, R.C., An Elementary Guide to Reliability, 5th ed., Butterworth Heinemann, Oxford, 1997.
  59. Duncan, A.J., Quality Control and Industrial Statistics, 5th ed., Irwin, Homewood, IL, 1986.
  60. Edwards, G.T., and Watson, I.A., “A Study of Common Mode Failures,” SRD-R-146, United Kingdom Atomic Energy Authority, Safety and Reliability Directorate, July 1979.
  61. Eskin, D.J., et al., “Reliability Derating Procedures,” RADC-TR-84-254, Rome Laboratory, 1984.
  62. Evans, H.R., “Superstition, Witchcraft, Reliability Prediction,” IEEE Transactions on Reliability, Vol. 37, 1988, p. 457.
  63. Fault Tree Handbook with Aerospace Applications, NASA Office of Safety and Mission Assurance, August 2002.
  64. Federal Consumer Product Warranties Law, January 4, 1975, Title I of Magnusson–Moss Warranty Act—Federal Trade Commission, Public Law 93-637. U.S. Code, Title 15, Chapter 50, §2304, Federal minimum standards for warranties. http://www4.law.cornell.edu/uscode/15/2304.html (accessed on November 22, 2013).
  65. Fink, J., Private Correspondence, January 1997.
  66. FIDES Group, “FIDES Guide issue A, Reliability Methodology for Electronic Systems,” 2004.
  67. Foster, M., “Toyota recalls 550,000 cars for steering issue,” Yahoo! News, November 9, 2011.
  68. Foty, D., MOSFET Modeling with SPICE: Principles and Practices, Prentice Hall PTR, Upper Saddle River, NJ, 1997.
  69. Foucher, B., Boullie, J., Meslet, B., and Das, D., “A Review of Reliability Predictions Methods for Electronic Devices,” Microelectronics Reliability, Vol. 42(8), 2002, pp. 1155–1162.
  70. Franceschini, F., and Galetto, M., “A New Approach for Evaluation of Risk Priories of Failure Modes in FMEA,” International Journal of Production Research, Vol. 39(13), 2001, pp. 2991–3002.
  71. Fraser, P., and Gregory, M., “A Maturity Grid Approach for the Assessment of Product Development Collaborations,” Proceedings of 9th International Product Development Management Conference, Sophia Antipolis, France, May 27–28, 2002.
  72. Fraser, P., Moultrie, J., and Holdway, R., “Exploratory Studies of a Proposed Design Maturity Model,” Proceedings of 8th International Product Development Management Conference, University of Twentie, Holland, June 11–12, 2001.
  73. Fushinobu, K., Majumdar, A., and Hijikata, K., “Heat Generation and Transport in Submicron Semiconductor Devices,” Transactions of the ASME: Journal of Heat Transfer, Vol. 117(2), 1995, pp. 25–31.
  74. Ganesan, S., Eveloy, V., Das, D., and Pecht, M., “Identification and Utilization of Failure Mechanisms to Enhance FMEA and FMECA,” Proceedings of the IEEE Workshop on Accelerated Stress Testing & Reliability (ASTR), Austin, TX, October 2–5, 2005a.
  75. Ganesan, S., Eveloy, V., Das, D., and Pecht, M., “Identification and Utilization of Failure Mechanisms to Enhance FMEA and FMECA,” Proceedings of the IEEE Workshop on Accelerated Stress Testing and Reliability (ASTR), Austin, Texas, October 3–5, 2005b.
  76. Gertman, D., and Blackman, H.S., Human Reliability and Safety Analysis Data Handbook, John Wiley and Sons, New York, 1994.
  77. Goodman, D., Vermeire, B., Ralston-Good, J., and Graves, R., “A Board-Level Prognostic Monitor for MOSFET TDDB,” IEEE Aerospace Conference, Big Sky, 2006.
  78. Goodson, K.E., Filk, M.I., Su, L.T., and Antoniadis, D.A., “Prediction and Measurement of Temperature Fields in Silicon-on-insulator Electronic Circuits,” Transactions of the ASME: Journal of Heat Transfer, Vol. 117(8), 1995, pp. 574–581.
  79. Gorniak, M., “Rome Labs,” Qualified Manufacturer's List Update,” Reliability Society Newsletter, Vol. 40, 1994, p. 8.
  80. Gu, J., and Pecht, M., “New Methods to Predict Reliability of Electronics,” International Conference on Reliability, Maintainability, and Safety, Beijing, China, 2007, pp. 440–451.
  81. Gu, J., Barker, D., and Pecht, M., “Prognostics Implementation of Electronics under Vibration Loading,” Microelectronics Reliability Journal, Vol. 47(12), 2007, pp. 1849–1856.
  82. Gu, J., Barker, D., and Pecht, M., “Uncertainty Assessment of Prognostics Implementation of Electronics Under Vibration Loading,” 2007 AAAI Fall Symposium on Artificial Intelligence for Prognostics, Arlington, VA, November 9–11, 2007.
  83. Guenzi, G., “Reliability Evaluation of Common Cause Failures and Other Interdependencies in Large Reconfigurable Networks,” doctoral dissertation, University of Maryland, 2010.
  84. Guidelines for Failure Mode and Effects Analysis, Guidelines for Failure Mode and Effects Analysis for Automotive, Aerospace, and General Manufacturing Industries, Dyadem Press, Ontario, Canada, 2003.
  85. Guin, L., “Cumulative Warranties, Conceptualiza-tion and Analysis,” doctoral dissertation, University of Southern California, Los Angeles, 1984.
  86. Hakim, E., “Reliability Prediction: Is Arrhenius Erroneous?,” Solid State Technology, Vol. 33, 1990, p. 57.
  87. Harry, M., and Schroeder, R., Six Sigma: The Breakthrough Management Strategy Revolutionizing the World's Top Corporations, Currency, New York, 2000.
  88. Haugen, E.B., Probabilistic Approach to Design, John Wiley & Sons, New York, 1968.
  89. Hicks, C.R., and Turner, K.V., Fundamental Concepts in the Design of Experiments, 5th ed., Oxford University Press, New York, 1999.
  90. Hoerl, R.W., “Six Sigma and the Future of the Quality Profession,” Quality Progress, Vol. 31(6), 1998, pp. 35–42.
  91. Hotelling, H., Multivariate Quality Control, Techniques of Statistical Analysis, C. Eisenhart, M.W. Hastay, and W.A. Wallis (eds.), McGraw Hill, New York, 1947.
  92. Howard, R.T., “Electrochemical Model for Corrosion of Conductors on Ceramic Substrates,” IEEE Transactions on CHMT, Vol. 4(4), 1981, pp. 520–525.
  93. Hu, J., Barker, D., Dasgupta, A., and Arora, A., “Role of Failure-mechanism Identification in Accelerated Testing,” Journal of the IES, Vol. 36(4), 1993, pp. 39–45.
  94. Huang, C.J., Grotjohn, T.A., Sun, C.J., Reinhard, D.K., and Yu, C.-C.W., “Temperature Dependence of Hot-Electron Degradation in Bipolar Transistors,” IEEE Transactions on Electron Devices, Vol. 40(9), 1993, pp. 1669–1674.
  95. Hughes, G., Murray, J., Kreutz-Delgado, K., and Elkan, C., “Improved Disk-drive Failure Warnings,” IEEE Transactions on Reliability, Vol. 51(3), 2002, pp. 350–357.
  96. IEC Standard 60134, Ratings System for Electronic Tubes and Valves and Analogous Semiconductor Devices, Geneva, Switzerland, 1961 (last review date 1994).
  97. IEC/PAS 62240, Use of Semiconductor Devices Outside Manufacturers' Specified Temperature Ranges, Edition 1, 2001-04, (Also being developed as GEIA 4900), 2001.
  98. IEEE 100, The Authoritative Dictionary of IEEE Standards Terms, 7th ed., Standards Information Network IEEE Press, Piscataway, NJ, 2000.
  99. IEEE Standard 1332–1998, IEEE Standards Board, “IEEE Standard Reliability Program for the Development and Production of Electronic Systems and Equipment,” June 30, 1998.
  100. IEEE Standard 1413.1-2002, IEEE Guide for Selecting and Using Reliability Predictions Based on IEEE 1413, IEEE, February 2003.
  101. IEEE Standard 1413–1998, “IEEE Standard Methodology for Reliability Prediction and Assessment for Electronic Systems and Equipment,” IEEE, December 1998.
  102. IEEE Standards Project Editors, Reliability Program for the Development and Production of Electronic Products, IEEE Std. 1332, IEEE, New York, NY, 1998.
  103. IEEE Std. 1332–1998, IEEE Standard Reliability Program for the Development and Production of Electronic Systems and Equipment, IEEE Reliability Society, 1998.
  104. Intel, Military Product Data Book, 1990.
  105. Intel, Application Note AP-480—Pentium® Processor Thermal Design Guidelines Rev 2.0, November 1995.
  106. IPC-SM-785, “Guidelines for Accelerated Reliability Testing of Surface Mount Solder Attachments,” November 1992.
  107. Ishikawa, K., What Is Total Quality Control? The Japanese Way, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1985.
  108. Jackson, M., Mathur, A., Pecht, M., and Kendall, R., “Part Manufacturer Assessment Process,” Quality and Reliability Engineering International, Vol. 15, 1999a, pp. 457–468.
  109. Jackson, M., Sandborn, P., Pecht, M., Hemens-Davis, C., and Audette, P., “A Risk Informed Methodology for Parts Selection and Management,” Quality and Reliability Engineering International, Vol. 15, 1999b, pp. 261–271.
  110. Jayant, M., “Intel Recalls Fastest Pentium,” Electronic News, September 4, 2000.
  111. Jet Propulsion Laboratory, JPL Derating Guidelines, Electronic Parts Reliability, Section 507, JPL-D-8545, REV A, 1996.
  112. JEDEC Publication JEP 122-B, “Failure Mechanisms and Models for Semiconductor Devices,” August 2003.
  113. JEDEC Publication JEP 148, “Reliability Qualification of Semiconductor Devices Based on Physics-of-Failure Risk and Opportunity Assessment,” April 2004.
  114. Johnson, D., “Review of Fault Management Techniques Used in Safety Critical Avionic Systems,” Progress in Aerospace Science, Vol. 32(5), 1996, pp. 415–431.
  115. Johnson, M., and Nilsson, L., “The Importance of Reliability and Customization from Goods to Services,” Quality Management Journal, Vol. 10(1), 2003.
  116. Johnson, P., and Rabe, D., “Detecting Intermittent Test Failures with the Aid of Environmental Stress Screening,” AUTOTESTCON ′95. Systems Readiness: Test Technology for the 21st Century. Conference Record, pp. 127–134, 1995.
  117. Juran, J.M., and Gryna, F.M., Quality Planning and Analysis, McGraw-Hill, New York, 1980.
  118. Kane, V.E., “Process Capability Indices,” Journal of Quality Technology, Vol. 18(1), 1986, pp. 41–52.
  119. Kanniche, M., and Mamat-Ibrahim, M., “Wavelet-based Fuzzy Algorithm for Condition Monitoring of Voltage Source Inverters,” Electronic Letters, Vol. 40(4), 2004, pp. 267–268.
  120. Kapur, K.C., “Quality Evaluation Systems for Reliability,” Reliability Review, Vol. 6(2), 1986, pp. 19–20.
  121. Kapur, K.C., and Feng, Q., “Integrated Optimization Models and Strategies for the Improvement of the Six Sigma Process,” International Journal of Six Sigma and Competitive Advantage, Vol. 1(2), 2005, pp. 210–228.
  122. Kapur, K.C., and Feng, Q., “Statistical Methods for Product and Process Improvement,” in H. Pham (ed.), The Springer Handbook of Engineering Statistics, pp. 193–212, Springer, London, 2006.
  123. Kapur, K.C., and Lamberson, L.R., Reliability in Engineering Design, John Wiley and Sons, New York, 1977.
  124. Kar, T.P., and Nachlas, J.A., “Coordinated Warranty and Burn-In Strategies,” IEEE Transactions on Reliability, Vol. 46, 1997, pp. 512–518.
  125. Kara-Zaitri, C., Keller, A.Z., and Fleming, P.V., “A Smart Failure Mode and Effect Analysis Package,” Annual Reliability and Maintainability Symposium Proceedings, 1992, pp. 414–421.
  126. Kasley, K.L., Oleszek, G.M., and Anderson, R.L., “Investigation of the Kink and Hysteresis from 13 K to 30 K in n-Channel CMOS Transistors with a Floating Well,” Solid State Electronics, Vol. 36(7), 1993, pp. 945–948.
  127. Kececioglu, B.D., Reliability Engineering Handbook, Vol. 1 and 2, Prentice Hall, Englewood Cliffs, NJ, 1991.
  128. Kececioglu, D., and Cormier, D., “Designing a Specified Reliability Directly into a Component,” Proceedings of Third Aerospace Reliability and Maintainability Conference, 1968.
  129. Kimseng, K., Hoit, M., and Pecht, M., “Physics-of-Failure Assessment of a Cruise Control Module,” Microelectronics Reliability, Vol. 39(10), 1999, pp. 1423–1444.
  130. Kirkland, L., Pombo, T., Nelson, K., and Berghout, F., “Avionics Health Management: Searching for the Prognostics Grail,” Proceedings of the IEEE Aerospace Conference, Vol. 5, 2004, pp. 3448–3454.
  131. Kirwan, B., A Guide to Practical Human Reliability Assessment, Taylor and Francis, Bristol, PA, 1994.
  132. Klausner, M., Grimm, W., and Hendrickson, C., “Reuse of Electric Motors in Consumer Products,” Journal of Ecology, Vol. 2(2), 1998a, pp. 89–102.
  133. Klausner, M., Grimm, M., Hendrickson, C., and Horvath, A., “Sensor-Based Data Recording of Use Conditions for Product Take-Back,” IEEE International Symposium on Electronics and the Environment, New York, 1998b, pp. 138–143.
  134. Korsmeyer, D., “Discovery and Systems Health,” National Aeronautics and Space Administration, http://ti.arc.nasa.gov/tech/techarea.php?ta=4 (accessed on November 21, 2013).
  135. Kotz, S., and Lovelace, C.R., Process Capability Indices in Theory and Practice, Arnold, London, 1998.
  136. Lall, P., Pecht, M., and Hakim, E., “Characterization of Functional Relationship between Temperature and Microelectronic Reliability,” Microelectronics and Reliability, Vol. 35(3), 1995, pp. 377–402.
  137. Lall, P., Pecht, M., and Hakim, E.B., Influence of Temperature on Microelectronics and System Reliability: A Physics of Failure Approach, CRC Press, Boca Raton, FL, 1997.
  138. Lasance, C.J.M., “Accurate Temperature Prediction in Consumer Electronics: A Must but Still a Myth,” in S. Kakaç, H. Yüncü, and K. Hijikata (eds.), Cooling of Electronics Systems, pp. 825–858, Kluwer Academic Publishers, Doedrecht, 1993.
  139. Leemis, L.M., Reliability: Probabilistic Models and Statistical Methods, Prentice-Hall, Upper Saddle River, NJ, 1995.
  140. Leonard, C., “Mechanical Engineering Issues and Electronic Equipment Reliability: Incurred Costs without Compensating Benefits,” Transactions of the ASME: Journal of Electronic Packaging, Vol. 113(1), 1991a, pp. 1–7.
  141. Leonard, C., “MIL-HDBK-217: It's Time to Rethink It,” Electronic Design, 1991b, pp. 79–82.
  142. Lewis, E.E., Introduction to Reliability Engineering, John Wiley and Sons, New York, 1996.
  143. Lewis, N., “Reliability Through the Ages,” Presented at Canadian Reliability and Maintainability Symposium, Ottawa, Canada, October 16–17, 2003.
  144. Lieberman, F., “How to Select Parts and What Users Need to Know a Manufacturer's Perspective,” CALCE Parts Selection and Management Workshop, June 16, 1998.
  145. Liker, J., The Toyota Way: 14 Management Principles from the World's Greatest Manufacturer, McGraw Hill, New York, 2003.
  146. Lowerre, J.M., “On warranties,” Journal of Industrial Engineering, Vol. 19, 1968, pp. 359–360.
  147. Lycoudes, N., (Motorola) Advanced Technology, Acquisition, Qualification and Reliability Workshop, Motorola Semiconductors, Newport Beach, CA, August 15–17, 1995.
  148. Lycoudes, N., et al., “Considerations for Burn-In Tailoring of Integrated Circuits,” Proceedings of the Institute of Environmental Sciences, 1990, pp. 27–41.
  149. Macbeth, D., and Fergusson, N., Partnership Sourcing: An Integrated Supply Chain Management Approach, Pittman Publishing, London, 1994.
  150. Maher, E., “No-Fault Finder,” May 2000, http://www.aviationtoday.com/reports/avmaintenace/previous/0500/05nff.htm (accessed on October 3, 2002).
  151. Maniwa, R.T., and Jain, M., “Focus Report: High Speed Benchmark,” Integrated System Design, March 1996. Website: http://www.isdmag.com.
  152. Martz, H.F., and Waller, R.A., Bayesian Reliability Analysis, John Wiley & Sons, New York, 1982.
  153. Martz, H.F., and Waller, R.A., “Bayesian Reliability Analysis of Complex Series/Parallel Systems of Binomial Subsystems and Components,” Technometrics, Vol. 32, 1990, pp. 407–416.
  154. Mathew, S., Das, D., Osterman, M., Pecht, M., and Ferebee, R., “Prognostic Assessment of Aluminum Support Structure on a Printed Circuit Board,” ASME Journal of Electronic Packaging, Vol. 128(4), 2006, pp. 339–345.
  155. Mauri, G., “Integrating Safety Analysis Techniques, Supporting Identification of Common Cause Failures,” PhD thesis, The University of York, Department of Computer Science, September 2000.
  156. McCluskey, P.F., High Temperature Electronics, CRC Press, Boca Raton, Florida, 1996.
  157. McCluskey, P.F., et al., “Uprating of Commercial Parts for Use in Harsh Environments,” CALCE EPRC Report, November 1996.
  158. McGrath, M.E. (ed.), Setting the PACE in Product Development: A Guide to Product and Cycle Time Excellence, Butterworth-Heinemann, Burlington, MA, 1996.
  159. Meister, D., “Human Factors in Reliability,” in G.W. Ireson, C.F. Coombs, and R.Y. Moss (eds.), Handbook of Reliability Engineering and Management, 2nd ed., pp. 9.1–9.30, McGraw Hill, New York, 1996.
  160. Menke, W.W., “Determination of warranty reserves,” Management Science, Vol. 15, 1969, pp. 542–549.
  161. Micron Semiconductor, TN-00-07—IBIS Behavioral Models, 1998.
  162. Middendorf, A., Griese, H., Reichl, H., and Grimm, W., “Using Life-Cycle Information for Reliability Assessment of Electronic Assemblies,” IEEE International Integrated Reliability Workshop, Final Report, Piscataway, NJ, 2002, pp. 176–179.
  163. Mishra, K., and Gross, K., “Dynamic Stimulation Tool for Improved Performance Modeling and Resource Provisioning of Enterprise Servers,” Proceedings of the 14th IEEE International Symposium on Software Reliability Engineering (ISSRE'03), Denver, CO, November 2003.
  164. Mishra, S., and Pecht, M., “In-Situ Sensors for Product Reliability Monitoring,” Proceedings of the SPIE, Vol. 4755, 2002, pp. 10–19.
  165. Mishra, S., Pecht, M., Smith, T., McNee, I., and Harris, R., “Remaining Life Prediction of Electronic Products Using Life Consumption Monitoring Approach,” Proceedings of the European Microelectronics Packaging and Interconnection Symposium, Cracow, Poland, 2002, pp. 136–142.
  166. Mishra, S., Ganesan, S., Pecht, M., and Xie, J., “Life Consumption Monitoring for Electronics Prognostics,” Proceedings of the IEEE Aerospace Conference, Vol. 5, 2004, pp. 3455–3467.
  167. Mitra, A., and Patankar, J.G., “Market Share and Warranty Costs for Renewable Warranty Programs,” International Journal of Production Economics, Vol. 50, 1997, pp. 155–168.
  168. MIL-STD-883, “Test Methods and Procedures for Microelectronics,” Department of Defense, 1968.
  169. MIL_STD_1629 (SHIPS), “Procedures for Performing a Failure Mode and Effects Analysis for Shipboard Equipment,” U.S. Department of the Navy, Naval Ship Engineering Center, Hyattsville, MD, November 1974.
  170. Mobley, R.K., Root Cause Failure Analysis, Butterworth-Heinemann, Boston, MA, 1999.
  171. Montgomery, D.C., Design and Analysis of Experiments, 5th ed., John Wiley and Sons, New York, 2001.
  172. Montgomery, D.C., Introduction to Statistical Quality Control, 5th ed., John Wiley & Sons, New York, 2005.
  173. Montgomery, D.C., and Runger, G.C., Applied Statistics and Probability for Engineers, 4th ed., John Wiley & Sons, New York, 2007.
  174. Morris, S.F., “Use and Application of MIL-HDBK-217,” Solid State Technology, Vol. 33, 1990, pp. 65–69.
  175. Murthy, D.N.P., and Blischke, W.R., “Product warranty management—II: An integrated framework for study,” European Journal of Operational Research, Vol. 62, 1991a, pp. 261–280.
  176. Murthy, D.N.P., and Blischke, W.R., “Product warranty management—III: A review of mathematical mod-,” European Journal of Operational Research, Vol. 62, 1991b, pp. 1–34.
  177. Myers, R.H., and Montgomery, D.C., Response Surface Methodology: Process and Product Optimization Using Designed Experiments, John Wiley and Sons, New York, 2002.
  178. Naem, A.A., Deen, J., and Chee, L.Y., “Temperature Effects on the Resistivity of Polycrystalline Silicon Titanium Salicide,” Journal of Applied Physics, Vol. 76(2), 1994, pp. 1071–1076.
  179. Nakayama, W., “Information Processing and Heat Transfer Engineering: Some Generic Views on Future Research Needs,” in S. Kakaç, H. Yüncü, and K. Hijikata (eds.), Cooling of Electronics Systems, pp. 911–944, Kluwer Academic Publishers, Doedrecht, 1993.
  180. National Society of Professional Engineers, “NSPE Code of Ethics for Engineers,” 1964, http://www.nspe.org/ethics/codeofethics/index.html (accessed on May 15, 2013).
  181. Naval Air Systems Command, Department of the Navy, “Application and Derating Requirements for Electronic Components,” AS-4613, 1976.
  182. Newman, D.G., and Nesbitt, L.D., “USAF Experience with RIW,” Proceedings of the Annual Reliability and Maintainability Symposium, 1978, pp. 55–61.
  183. Ng, K.K., “A Survey of Semiconductor Devices,” IEEE Transactions on Electron Devices, Vol. 43(10), 1996, pp. 1760–1766.
  184. Nguyen, D.G., and Murthy, D.N.P., “Optimal Burn-In Time to Minimize Cost for Products Sold under Warranty,” IIE Transactions, Vol. 14, 1982, pp. 167–174.
  185. Nguyen, D.G., and Murthy, D.N.P., “A General Model for Estimating Warranty Costs for Repairable Products,” IEEE Transactions on Reliability, Vol. 16, 1984, pp. 379–386.
  186. O'Conner, P.D.T., “Commentary: Reliability—Past, Present, and Future,” IEEE Transactions on Reliability, Vol. 49(4), 2000, pp. 335–341.
  187. Ohmite, “Resistor Selection,” http://www.ohmite.com/techdata/res_select.pdf, August 2002 (accessed January 24, 2014).
  188. Ohno, T., Toyota Production System: Beyond Large Scale Production, Productivity Press, London, 1988.
  189. OPS ALACARTE Company, “Reliability Services in the Design Phase: Sneak Circuit Analysis (Hardware or Software),” 2006, http://www.opsalacarte.com/Pages/reliability/reliability_des_sneakcircut.htm (accessed on November 22, 2006).
  190. Pande, P.S., Newman, R.P., and Cavanagh, R.R., The Six Sigma Way, McGraw-Hill, New York, 2000.
  191. Pasztor, A., and Landers, P., “Toshiba Agrees to Settlement on Laptops—Pact for $2.1 Billion Stems from Inquiries into Flaws That May Be Common,” Wall Street Journal, November 1, 1999, p. A3.
  192. Paulk, M.C., Weber, C.V., Garcia, S.M., Chrisis, M.B., and Bush, M., “Key Practices of the Capability Maturity ModelSM, Version 1.1,” Technical Report CMU/SEI-93-TR-025, ESC-TR-93-178, Software Engineering Institute, Carnegie Mellon University, February 1993.
  193. Pecht, M., Integrated Circuit, Hybrid, and Multichip Module Package Design Guideline, John Wiley & Sons, New York, 1994.
  194. Pecht, M., “Issues Affecting Early Affordable Access to Leading Electronics Technologies by the US Military and Government,” Circuit World, Vol. 22(2), 1996a, pp. 7–15.
  195. Pecht, M., “Why the Traditional Reliability Prediction Models Do Not Work—Is There an Alternative?,” Electronics Cooling, Vol. 2(1), 1996b, pp. 10–12.
  196. Pecht, M., and Dasgupta, A., “Physics-of-Failure: An Approach to Reliable Product Development,” Journal of the Institute of Environmental Sciences, Vol. 38, 1995, pp. 30–34.
  197. Pecht, M., and Nash, F., “Predicting the Reliability of Electronic Equipment,” Proceedings of the IEEE, Vol. 82(7), 1994, pp. 992–1004.
  198. Pecht, M., and Ramakrishnan, A., “Development and Activities of the IEEE Reliability Standards Group,” Journal of the Reliability Engineering Association of Japan, Vol. 22(8), 2000, pp. 699–706.
  199. Pecht, M., and Ramappan, V., “Are Components Still a Major Problem? A Review of Electronic Systems and Device Field Failure Returns,” IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 15(6), 1992a, pp. 1060–1064.
  200. Pecht, M., and Ramappan, V., “Are Components Still the Major Problem: A Review of Electronic System and Device Field Failure Returns,” IEEE Transactions CHMT, Vol. 15(6), 1992b, pp. 1160–1164.
  201. Pecht, M., Dasgupta, A., and Evans, J., Quality Conformance and Qualification of Microelectronic Packages and Interconnects, John Wiley & Sons, New York, 1994.
  202. Pecht, M., Nguyen, L., and Hakim, E., Plastic Encapsulated Microelectronics, John Wiley & Sons, New York, 1995.
  203. Pecht, M., Radojcic, R., and Rao, G., Guidebook for Managing Silicon Chip Reliability, CRC Press, Boca Raton, FL, 1999.
  204. Pecht, M., Dube, M., Natishan, M., and Knowles, I., “An Evaluation of Built-in Test,” IEEE Transactions on Aerospace and Electronic Systems, Vol. 37(1), 2001, pp. 266–272.
  205. Pecuh, I., Margala, M., and Stopjakova, V., “1.5 Volts Iddq/Iddt Current Monitor,” Proceedings of the IEEE Canadian Conference on Electrical and Computer Engineering, Vol. 1, 1999, pp. 472–476.
  206. Pendsé, N., and Pecht, M., “Parameter Re-characterization Case Study: Electrical Performance Comparison of the Military and Commercial Versions of All Octal Buffer,” in Future Circuits International, Vol. 6, pp. 63–67, Technology Publishing, London, 2000.
  207. Pfaffenberger, R., and Patterson, J., Statistical Methods, Irwin Publishers, Toronto, ON, 1987.
  208. Phadke, M.S., Quality Engineering Using Robust Design, Prentice-Hall, Edgewood Cliffs, NJ, 1989.
  209. Philips, Family Specifications: HCMOS Family Characteristics, March 1988.
  210. Plastic Package Availability Program, Final Report, sponsored by Defense Logistics Agency, Contract Number DLA900-92-C-1647, Sharp Proceedings, Indianapolis, IN, November 15, 1995.
  211. Pyzdek, T., and Keller, P.A., The Six Sigma Handbook: A Complete Guide for Greenbelts, Blackbelts, and Managers at All Levels, McGraw Hill, New York, 2009.
  212. Ramakrishnan, A., and Pecht, M., “A Life Consumption Monitoring Methodology for Electronic Systems,” IEEE Transactions on Components and Packaging Technologies, Vol. 26(3), 2003, pp. 625–634.
  213. Ramakrishnan, A., Syrus, T., and Pecht, M., “Electronic Hardware Reliability,” in Avionics Handbook, pp. 22.1–22.21, CRC Press, Boca Raton, FL, 2000.
  214. Rao, S.S., Reliability-Based Design, pp. 505–543, McGraw-Hill, Inc., New York, 1992.
  215. Rausand, M., and Hoyland, A., System Reliability Theory: Models, Statistical Methods and Applications, 2nd ed., Wiley-Interscience, Hoboken, NJ, 2003.
  216. Ridgetop Semiconductor-Sentinel Silicon™ Library, “Hot Carrier (HC) Prognostic Cell,” August 2004.
  217. Rofail, S.S., and Elmasry, M.I., “Temperature-Dependent Characteristics of BiCMOS Digital Circuits,” IEEE Transactions on Electron Devices, Vol. 41(1), 1993, pp. 169–177.
  218. Roland, N., “Toyota agrees to pay $32.4 million U.S. fine over timing of recalls,” Automotive News, December 21, 2010a.
  219. Roland, N., “Toyota to pay $32.4 million U.S. fine over timing of recalls,” Autoweek, December 21, 2010b.
  220. Rose, C., Beiter, A., and Ishii, K., “Determining End-of-Life Strategies as a Part of Product Definition,” 1999 IEEE International Symposium on Electronics and the Environment, Piscataway, NJ, 1999, pp. 219–224.
  221. Rouet, V., and Foucher, B., “Development and Use of a Miniaturized Health Monitoring Device,” Proceedings of the IEEE International Reliability Physics Symposium, 2004, pp. 645–646.
  222. Rudra, A.B., et al., “Electrochemical Migration in Multichip Modules,” Circuit World, Vol. 22(1), 1995, pp. 67–70.
  223. Sandborn, P., and Murphy, C., “A Model for Optimizing the Assembly and Disassembly of Electronic Systems,” IEEE Transactions on Electronics Packaging Manufacturing, Vol. 22(2), 1999, pp. 105–117.
  224. Sander, P.C., and Brombacher, A.C., “MIR: The Use of Reliability Information Flows as a Maturity Index for Quality Management,” Quality and Reliability Engineering International, Vol. 15(6), 1999, pp. 439–447.
  225. Sander, P.C., and Brombacher, A.C., “Analysis of Quality Information Flows in the Product Creation Process of High-Volume Consumer Products,” International Journal of Production Economics, Vol. 67(1), 2000, pp. 37–52.
  226. SAE Standard SAE J1739 “Potential Failure Mode and Effects Analysis in Design (Design FMEA) and Potential Failure Mode and Effects Analysis in Manufacturing and Assembly Processes (Process FMEA) and Effects Analysis for Machinery (Machinery FMEA),” August 2002.
  227. Scalise, J., Honeywell Air Transport Systems Division, private communication, Summer 1996.
  228. Scheidt, L., and Zong, S., “An Approach to Achieve Reusability of Electronic Modules,” 1994 IEEE International Symposium on Electronics and the Environment, New York, 1994 pp. 331–336.
  229. Searls, D., Dishongh, T., and Dujari, P., “A Strategy for Enabling Data Driven Product Decisions Through a Comprehensive Understanding of the Usage Environment,” Proceedings of IPACK'01, Kauai, HI, July 8–13, 2001.
  230. Self-Monitoring Analysis and Reporting Technology (SMART), “Self-Monitoring Analysis and Reporting Technology (SMART),” PC Guide, 2001, http://www.pcguide.com/ref/hdd/perf/qual/featuresSMART-c.html (accessed on November 21, 2013).
  231. Shetty, V., Das, D., Pecht, M., Hiemstra, D., and Martin, S., “Remaining Life Assessment of Shuttle Remote Manipulator System End Effector,” Proceedings of the 22nd Space Simulation Conference, Ellicott City, MD, October 21–23, 2002.
  232. Sheu, S.H., and Chien, Y.H., “Optimal Burn-In Time to Minimize the Cost for General Repairable Products Sold under Warranty,” European Journal of Operational Research, Vol. 163, 2005, pp. 445–461.
  233. Shewhart, W.A., Economic Control of Quality of a Manufactured Product, D. Van Nostrand Company, New York, 1931.
  234. Shingo, S., A Study of the Toyota Production System, Productivity Press, London, 1989.
  235. Shishko, R., NASA System Engineering Handbook, SP-6105, June 1995.
  236. Simon, M., Graham, B., Moore, P., JunSheng, P., and Changwen, X., “Life Cycle Data Acquisition Unit—Design, Implementation, Economics and Environmental Benefits,” IEEE International Symposium on Electronics and the Environment, Piscataway, NJ, 2000, pp. 284–289.
  237. Skormin, V., Gorodetski, V., and Popyack, L., “Data Mining Technology for Failure Prognostic of Avionics,” IEEE Transactions on Aerospace and Electronic Systems, Vol. 38(2), 2002, pp. 388–403.
  238. Slay, B., “Best Commercial Practices in Military Semiconductors,” Sharp Proceedings of the 4th Annual Commercial and Plastic Components in Military Applications Workshop, November 16, 1995.
  239. Smith, P., and Campbell, D., “Practical Implementation of BICS for Safety-Critical Applications,” Proceedings of the IEEE International Workshop on Current and Defect Based Testing-DBT, April 2000, pp. 51–56.
  240. Society of Automotive Engineers, Recommended Environmental Practices for Electronic Equipment Design, SAE J1211, Rev. November 1978.
  241. Solomon, R., Sandborn, P., and Pecht, M., “Electronic Part Life Cycle Concepts and Obsolescence Forecasting,” IEEE Transactions on Components and Packaging Technologies, Vol. 23(3), 2000, pp. 707–717.
  242. Sorensen, B., “Digital Averaging—The Smoking Gun behind ‘No-Fault-Found’,” Air Safety Week, February 24, 2003, http://www.aviationtoday.com/regions/weur/2120.html#.UuncRrS1T2I (accessed on January 29, 2014).
  243. Sorensen, B.A., Kelly, G., Sajecki, A., and Sorensen, P.W. “An Analyzer for Detecting Aging Faults In Electronic Devices,” AUTOTESTCON ′94. IEEE Systems Readiness Technology Conference. “Cost Effective Support into the Next Century,” Conference Proceedings, pp. 417–421, September 20–22, 1994.
  244. Steinberg, D.S., Vibration Analysis for Electronic Equipment, 2nd ed., John Wiley & Sons, New York, 1988.
  245. Stoller, G., “Engineer Fears Repeat of 1988 Aloha Jet Accident,” Honolulu Advertiser, January 18, 2001.
  246. Stoumbos, Z.G., Reynolds, M.R., Ryan, T.P., and Woodall, W.H., “The State of Statistical Process Control as We Proceed into the 21st Century,” Journal of the American Statistical Association, Vol. 95, 2000, pp. 992–998.
  247. Stracener, J.T., “Mathematical Basis of Reliability,” in T.A. Cruse (ed.), Reliability-Based Mechanical Design, pp. 91–122, Marcel Dekker, New York, 1997.
  248. Strutt, J.E., “Reliability Capability Maturity Briefing Document,” Report No. R-03/2/1, Reliability Engineering and Risk Management Centre, Cranfield University, UK, 2001.
  249. Suh, N., The Principles of Design, Oxford University Press, New York, 1990.
  250. Suh, N., Axiomatic Design: Advantages and Applications, Oxford University Press, New York, 2001.
  251. Szakonyi, R., “Measuring R&D Effectiveness—I,” Research Technology Management, Vol. 37(2), 1994a, pp. 27–32.
  252. Szakonyi, R., “Measuring R&D Effectiveness—II,” Research Technology Management, Vol. 37(3), 1994b, pp. 44–55.
  253. Taguchi, G., Introduction to Quality Engineering: Designing Quality into Products and Processes, Asian Productivity Organization, Unipub/Quality Resources, White Plains, NY, 1986.
  254. Taguchi, G., System of Experimental Design, Vol. I and II, Quality Resources, New York and American Supplier Institute, Dearborn, MI, 1987.
  255. Talmor, M., and Arueti, S., “Reliability Prediction: The Turn-Over Point,” Proceedings of the Annual Reliability and Maintainability Symposium, 1997, pp. 254–262.
  256. Tang, S.M., “New Burn-in Methodology Based on IC Attributes, Family IC Burn-in Data, and Failure Mechanism Analysis,” Proceedings of the Annual Reliability and Maintainability Symposium, 1996, pp. 185–190.
  257. Telcordia Technologies, “Reliability Prediction Procedure for Electronic Equipment Issue 1,” Special Report SR-332, Telcordia Customer Service, Piscataway, NJ, May 2001.
  258. Thomas, D.A., Ayers, K., and Pecht, M., “The ‘Trouble Not Identified’ Phenomenon in Automotive E1ectronics,” Microelectronics Reliability, Vol. 42(4–5 and 10), 2002, pp. 641–651.
  259. Tibken, S., “Intel to Resume Shipments of Flawed Chip,” Wall Street Journal, February 7, 2011.
  260. Tiku, S., Azarian, M., and Pecht, M., “Using a Reliability Capability Maturity Model to Benchmark Electronics Companies,” Int'l Journal of Quality & Reliability Management, Vol. 24(5), 2007, pp. 547–563.
  261. Tuchband, B., and Pecht, M., “The Use of Prognostics in Military Electronic Systems,” Proceedings of the 32nd GOMACTech Conference, Lake Buena Vista, FL, March 19–22, 2007, pp. 157–160.
  262. Udy, J., “Recall Central: Defective Honda Airbag Component; Toyota Sienna Load Placard,” Automobile Magazine, December 2, 2011.
  263. United States Department of Defense, “Military Standard: Climatic Information to Determine Design and Test Requirements for Military Systems and Equipment—MIL 210C,” Washington, DC, 1987.
  264. United States Department of Defense, “Military Standard: Environmental Test Methods and Engineering Guidelines—MIL 810E,” Washington, DC, 1989.
  265. United States Department of Defense, MIL-STD-965: Parts Control Program, Columbus, OH, September 26, 1996.
  266. University of Utah, Mechanical Engineering Department, “Kansas City Hyatt Regency Walkway Collapse Packet,” 1981, http://www.mech.utah.edu/ergo/pages/educational/safety_modules/kc/index.html (accessed on May 15, 2013).
  267. U.S. Department of Defense, MIL-HDBK 217, Military Handbook for Reliability Prediction of Electronic Equipment, Version A, 1965.
  268. Vaidyanathan, K., and Gross, K., “MSET Performance Optimization for Detection of Software Aging,” Proceedings of the 14th IEEE International Symposium on Software Reliability Engineering, Denver, CO, November 2003.
  269. Vichare, N., and Pecht, M., “Prognostics and Health Management of Electronics,” IEEE Transactions on Components and Packaging Technologies, Vol. 29(1), 2006, pp. 222–229.
  270. Vichare, N., Rodgers, P., Eveloy, V., and Pecht, M., “In Situ Temperature Measurement of a Notebook Computer: A Case Study in Health and Usage Monitoring of Electronics,” IEEE Transactions on Device and Materials Reliability, Vol. 4(4), 2004, pp. 658–663.
  271. Vichare, N., Rodgers, P., and Pecht, M., “Methods for Binning and Density Estimation of Load Parameters for Prognostics and Health Management,” International Journal of Performability Engineering, Vol. 2(2), 2006, pp. 149–161.
  272. Vichare, N., Rodger, P., Eveloy, V., and Pecht, M., “Environment and Usage Monitoring of Electronic Products for Health Assessment and Product Design,” International Journal of Quality Technology and Quantitative Management, Vol. 4(2), 2007, pp. 235–250.
  273. Voas, J., Ghosh, A., Charron, F., and Kassab, L., “Reducing Uncertainty about Common-Mode Failures,” Proceedings of the Eighth International Symposium on Software Reliability Engineering, November 2–5, 1997, pp. 308–319.
  274. Washington Post, “Ready When Chip Lines Are Down,” December 18, 1999, p. E01.
  275. Weibull, W., “A Statistical Theory of the Strength of Material,” Proceedings Royal Swedish Institute for Engineering Research, Vol. 151(1), 1939.
  276. Weibull, W., “A Statistical Distribution Function of Wide Applicability,” Journal of Applied Mechanics, Vol. 18, 1951, pp. 293–297.
  277. Western Electric, Statistical Quality Control Handbook, Western Electric Corporation, Indianapolis, IN, 1956.
  278. Whisnant, K., Gross, K., and Lingurovska, N., “Proactive Fault Monitoring in Enterprise Servers,” 2005 IEEE International Multi-Conference in Computer Science and Computer Engineering, Las Vegas, NV, June 2005.
  279. Williams, K., Robertson, N., Haritonov, C.R., and Strutt, J., “Reliability Capability Evaluation and Improvement Strategies for Subsea Equipment Suppliers,” Journal of the Society for Underwater Technology, Vol. 25(4), 2003, pp. 165–174.
  280. Wilson, P., Dell, L.D., and Anderson, G.F., Root Cause Analysis, ASQC Quality Press, Milwaukee, WI, 1993.
  281. Wong, K., “The Bathtub and Flat Earth Society,” IEEE Transactions on Reliability, Vol. 38, 1989, p. 403.
  282. Wong, K.L., “What Is Wrong with the Existing Reliability Prediction Methods?,” Quality and Reliability Engineering International, Vol. 6, 1990, pp. 251–258.
  283. Wright, R., and Kirkland, L., “Nano-Scaled Electrical Sensor Devices for Integrated Circuit Diagnostics,” IEEE Aerospace Conference, Vol. 6, 2003, pp. 2549–2555.
  284. Wright, R., Zgol, M., Keeton, S., and Kirkland, L., “Nanotechnology-Based Molecular Test Equipment (MTE),” IEEE Aerospace and Electronic Systems Magazine, Vol. 16(6), 2001, pp. 15–19.
  285. Wright, R., Zgol, M., Adebimpe, D., and Kirkland, L., “Functional Circuit Board Testing Using Nanoscale Sensors,” IEEE Systems Readiness Technology Conference, September 2003, pp. 266–272.
  286. Xue, B., and Walker, D., “Built-In Current Sensor for IDDQ Test,” Proceedings of the IEEE International Workshop on Current and Defect Based Testing-DBT, 25 April 2004, pp. 3–9.
  287. Yang, K., and andEl-Haik, B., Design for Six Sigma: A Roadmap for Product Development, McGraw-Hill, New York, 2003.
  288. Yeh, L.T., “Review of Heat Transfer Technologies in Electronic Equipment,” Transactions of the ASME, Journal of Electronic Packaging, Vol. 117(4), 1995, pp. 333–339.
  289. Yun, W.Y., Lee, Y.W., and Ferreira, L., “Optimal Burn-In Time under Cumulative Free Replacement Warranty,” Reliability Engineering and System Safety, Vol. 78, 2002, pp. 93–100.
  290. Zaino, N.A., Jr., and Berke, T.M., “Some Renewal Theory Results with Application to Fleet Warranties,” Naval Research Logistics Quarterly, Vol. 41, 1994, pp. 465–482.
..................Content has been hidden....................

You can't read the all page of ebook, please click here login for view all page.
Reset
18.222.200.143