Title Page
by Shiban Kishen Koul, G.S. Karthikeya
Millimeter Wave Antennas for 5G Mobile Terminals and Base Stations
- Cover
- Half Title
- Title Page
- Copyright Page
- Dedication
- Table of Contents
- Preface
- About the Authors
- Abbreviations
- 1. Introduction
- 1.1 Need for Millimeter Waves
- 1.2 Antennas for Cellular Communications
- 1.3 Contrast between 4G and 5G Architectures
- 1.4 Antenna Designs for mmWave 5G Mobile Terminals and Base Stations
- 1.4.1 Antennas for Mobile Terminals
- 1.4.2 Antennas for Base Stations
- 1.5 Antennas beyond 5G
- 1.6 Outline of the Book
- References
- 2. Conformal Antennas for Mobile Terminals
- 2.1 Introduction
- 2.2 Typical Requirements for Mobile Antennas
- 2.3 CPW-fed Wideband Corner Bent Antenna for 5G Mobile Terminals
- 2.3.1 CPW-fed Wideband Antenna
- 2.3.2 CPW-fed Corner Bent Antenna
- 2.3.3 CPW-fed Corner Bent Antenna with Reflector
- 2.4 A wideband High Gain Conformal Antenna for mmWave 5G Smartphones
- 2.5 Design Guidelines for CPW-fed Conformal Antennas at Ka Band
- 2.6 Conclusion
- References
- 3. Flexible Antennas for Mobile Terminals
- 4. Compact Antennas with Pattern Diversity
- 4.1 Introduction
- 4.2 CPW-fed Conformal Folded Dipole with Pattern Diversity
- 4.2.1 CPW-Fed Folded Dipole
- 4.2.2 Conformal Folded Dipole Backed by Reflector
- 4.3 Conformal Antennas with Pattern Diversity
- 4.3.1 Mobile Terminal Usage Modes
- 4.3.2 Conformal Patch Antenna
- 4.3.3 Conformal Tapered Slot Antenna
- 4.3.4 Conformal TSA with Parasitic Ellipse
- 4.3.5 Conformal Pattern Diversity
- 4.4 Case Studies: Measurement in a Typical Indoor Environment
- 4.5 Conclusion
- References
- 5. Pattern Diversity Antennas for Base Stations
- 5.1 Introduction
- 5.2 Pattern Diversity of Path Loss Compensated Antennas for 5G Base Stations
- 5.2.1 mmWave Tapered Slot Antenna
- 5.2.2 Dielectric and Metamaterial Loaded TSA
- 5.2.3 Pattern Diversity
- 5.3 Path Loss Compensated Pattern Diversity Antennas with 3D Printed Radome
- 5.3.1 3D Printed Radome for a Patch Antenna
- 5.3.2 Pattern Diversity with 3D Printed Radome
- 5.4 Path Loss Compensated Module with Progressive Offset ZIM
- 5.4.1 Central Element: Tapered Slot Antenna
- 5.4.2 Spatially Modulated ZIM Loaded Antenna
- 5.4.3 Stacked Pattern Diversity
- 5.5 Path Loss Compensated Quasi-Reflector Module
- 5.6 Design Guidelines for High Aperture Efficiency Antenna
- 5.7 Case Studies: Measurement in a Typical Indoor Environment
- 5.8 Conclusion
- References
- 6. Shared Aperture Antenna with Pattern Diversity for Base Stations
- 7. Co-Design of 4G LTE and mmWave 5G Antennas for Mobile Terminals
- 7.1 Introduction
- 7.2 Miniaturization Techniques for Antenna Size Reduction
- 7.3 Conformal 4G LTE MIMO Antenna Design
- 7.3.1 CRLH-Based Conformal 4G LTE Antenna
- 7.3.2 Compact CRLH-Based Conformal 4G LTE MIMO Antenna
- 7.4 Conformal mmWave 5G MIMO Antenna
- 7.5 Corner Bent Integrated Design of 4G LTE and mmWave 5G Antennas
- 7.5.1 4G LTE Antenna Design
- 7.5.2 mmWave 5G Antenna Design
- 7.5.3 Co-Designed Corner Bent 4G LTE and mmWave 5G MIMO Antennas
- 7.6 Case Study: Co-Design of 4G and 5G Antennas in a Smartphone
- 7.7 Conclusion
- References
- 8. Corner Bent Phased Array for 5G Mobile Terminals
- 9. Fabrication and Measurement Challenges at mmWaves
- 10. Research Avenues in Antenna Designs for 5G and beyond
- 10.1 Introduction
- 10.2 PCB-Based Antenna Designs for 5G Cellular Devices
- 10.3 Application of Additive Manufacturing for Antennas
- 10.3.1 A Dual Band mmWave Antenna on 3D Printed Substrate
- 10.4 On-Chip Antennas for CMOS Circuitry
- 10.4.1 A Wideband CPS-Fed Dipole on Silicon
- 10.5 Optically Transparent Antennas
- 10.6 Conclusion
- References
- Appendices
- Index
Millimetre Wave Antennas for 5G Mobile Terminals and Base Stations
Shiban Kishen Koul
G. S. Karthikeya
-
No Comment
..................Content has been hidden....................
You can't read the all page of ebook, please click here login for view all page.