- Cover
- Title Page
- Contents
- Dedication
- Preface to the First Edition
- Preface
- Acknowledgements
- 1. Introduction
- 2. General Architecture
- 3. I/O Ports and Special Function Registers
- 4. Addressing Modes and Data Move Operations
- 5. Arithmetic Operations
- 6. Program Branching
- 7. Programming Examples-I
- 8. Subroutines and Stack
- Chapter Objectives
- 8.1 Need of Subroutines
- 8.2 LCALL Instruction
- 8.3 RET Instruction
- 8.4 ACALL Instruction
- 8.5 Mechanism of Subroutines
- 8.6 Nesting of Subroutines
- 8.7 Stack
- 8.8 PUSH Instruction
- 8.9 POP Instruction
- 8.10 Other Applications of Subroutine
- 8.11 Comparison with 8085
- 8.12 Solved Examples
- 8.13 Parameter Passing in Subroutines
- Summary
- Points to Remember
- Review Questions
- 9. Logical Operations
- 10. Boolean Variable Manipulation
- 11. Programming Examples-II
- Chapter Objectives
- 11.1 Introduction
- 11.2 Count 1s in a Byte
- 11.3 Unpack a BCD Number
- 11.4 Pack BCD Digits
- 11.5 Pack Array of Unpacked BCD Digits
- 11.6 Find Largest and Smallest Integers of an Array
- 11.7 Bubble Sorting
- 11.8 Find the Sum of Factorials
- 11.9 Sort Out Numbers Divisible by 4
- Summary
- Points to Remember
- Review Questions
- 12. Advanced Instructions
- Chapter Objectives
- 12.1 Introduction
- 12.2 MOVC Instruction
- 12.3 MOVX Instruction
- 12.4 XCH Instruction
- 12.5 XCHD Instruction
- 12.6 MUL Instruction
- 12.7 DIV Instruction
- 12.8 DA A Instruction
- 12.9 JMP Instruction
- 12.10 SWAP Instruction
- 12.11 JBC Instruction
- 12.12 RETI Instruction
- 12.13 Solved Examples
- Summary
- Points to Remember
- Review Questions
- 13. Programming Examples-III
- 14. External Interrupts
- 15. Timer/Counter Interrupts
- 16. Serial Communication and Serial Interrupts
- 17. Interfacing: External Memory
- 18. Interfacing: Keyboards
- 19. Interfacing: Display Devices
- 20. Interfacing: DAC/ADC
- 21. Interfacing: DC Motor
- 22. Interfacing: Stepper Motor
- 23. Interfacing: Servomotor
- 24. Power Management
- 25. Case Study: A Home Protection System
- 26. Advanced Microcontrollers
- Chapter Objectives
- 26.1 Introduction
- 26.2 AVR Microcontrollers
- 26.2.1 Important Features
- 26.2.2 Pins and Signals
- 26.2.3 External Reset and Crystal Inputs (Optional)
- 26.2.4 Operating Voltages and Power Consumption
- 26.2.5 Internal Architecture
- 26.2.6 Program Memory (Flash)
- 26.2.7 Data Memory (SRAM)
- 26.2.8 Status Register
- 26.2.9 Stack and Stack Pointer
- 26.2.10 Power Management and Sleep Modes
- 26.2.11 System Reset
- 26.2.12 Watchdog Timer
- 26.2.13 ATmega8 Instruction Set
- 26.2.14 Comparison Between ATmega8 and ATmega16
- 26.2.15 JTAG Interface
- 26.3 MCS-96 Microcontrollers
- 26.4 ARM Microcontrollers
- 26.5 Renesas Microcontrollers
- Summary
- Points to Remember
- Review Questions
- 27. Interfacing Intel 8255 PPI with 8051
- Chapter Objectives
- 27.1 Introduction
- 27.2 Overview of 8255
- 27.3 Control Words for 8255
- 27.4 Mode 0 of 8255 (Basic Input/Output Mode)
- 27.5 Mode 1 of 8255 (Strobed Input/Output Mode)
- 27.6 Mode 2 of 8255 (Bidirectional Bus Mode)
- 27.7 Bit Set/Reset Mode
- 27.8 Hardware Interfacing
- 27.9 Solved Examples
- Summary
- Points to Remember
- Review Questions
- Answers for Evaluate Yourself
- Appendix A
- MCS-51 Instruction Set
- A.1 Instructions Arranged by Functional Order
- A.2 Instructions Arranged by their Opcodes
- A.3 Instructions Arranged by Alphabetical Order
- A.4 Instructions Arranged by Operand Types
- A.4.1 Instructions with Bit Operands
- A.4.2 Instruction with Direct Addressing
- A.4.3 Instructions with Indirect Addressing Through R0
- A.4.4 Instructions with Indirect Addressing Through R1
- A.4.5 Instructions with Register Addressing Through R0
- A.4.6 Instructions with Register Addressing Through R1
- A.4.7 Instructions with Register Addressing Through R2
- A.4.8 Instructions with Register Addressing Through R3
- A.4.9 Instructions with Register Addressing Through R4
- A.4.10 Instructions with Register Addressing Through R5
- A.4.11 Instructions with Register Addressing Through R6
- A.4.12 Instructions with Register Addressing Through R7
- A.4.13 Instructions with Register Addressing Through the Accumulator
- Appendix B
- Bibliography
- Copyright
8051 MICROCONTROLLER
INTERNALS, INSTRUCTIONS, PROGRAMMING AND INTERFACING
SECOND EDITION
SUBRATA GHOSHAL
Professor & Head,
Information Technology Department,
Sikkim Manipal Institute of Technology,
Sikkim, India
Delhi • Chennai
-
No Comment
..................Content has been hidden....................
You can't read the all page of ebook, please click here login for view all page.