To configure a connector using the WebLogic Server Administration console:
1. | Bring up the WebLogic server Administration console. |
2. | In the left pane, click on the domain you will be working in. |
3. | Expand the Deployments node. |
4. | Under Deployments in the left pane, click on the Connectors node. This should display a table of all the deployed connectors in the right pane. |
5. | In the right pane, click on the “Configure a New Connector” link. |
6. | From the options now listed in the right pane, select the RAR (archive file) that you want to configure. |
8. | Click on “Select a Target Server From Among Available Servers.” |
9. | Type in a name for the connector in the provided field. |
10. | Click the Configure and Deploy button. The Deploy panel should display in the right pane of the Administration console. |
11. | Information needs to be filled out on each of the tabs shown in the left column below. In the right column is a brief description of what information needs to be filled in. |
Configuration | Enter the deployment order. |
Target | Move the target server from the Available list to the Chosen list. |
Deploy | Deploy the connector to all or selected targets or undeploy it from all or selected targets. |
Monitoring | Check the Enable Session Monitoring box associated with the Connector. |
Notes | Optionally, fill out any notes you feel might be of use to yourself or other administrators. |
18.188.218.184