Legend:
Each cell of the table contains three data: the distance in LEGO units (studs), the quality of the matching, and the resulting angle in degrees.
Distances are measured excluding the starting point. (For example, if one peg is in the first hole of a beam and another is in the tenth, the distance is nine units.)
The quality of the matching is expressed with a symbol that reflects the difference between the actual distance and the closest perfect match, expressed in LEGO units, according to the following scheme:
Symbol | Meaning | Maximum Tolerance |
---|---|---|
P | Perfect match | 0.00 studs |
V | Very good | 0.02 studs |
G | Good | 0.04 studs |
N | Not so good | 0.06 studs |
B | Bad | 0.08 studs |
3.21.46.92