tunnel mode tag-switching

To set the encapsulation mode of the tunnel to Tag Switching, use the tunnel mode tag-switching interface configuration command. Use the no form of this command to set the tunneling encapsulation mode to the default, Generic Routing Encapsulation (GRE).

tunnel mode tag-switching

no tunnel mode tag-switching

Syntax Description

This command has no arguments or keywords.

Command Mode

Interface configuration

Usage Guidelines

This command first appeared in Cisco IOS Release 11.1 CT.

A tunnel interface number must be less than or equal to 65535.

The tunnel mode tag-switching command fails if the interface number is invalid for a TSP tunnel identifier.

Example

In the following example, the tunnel mode is set to Tag Switching:

interface tunnel 5
 tunnel mode tag-switching

Related Commands

You can search online at http://www.cisco.com to find documentation of related commands.

interface tunnel

tunnel tsp-hop