mls rp ip

To enable Multilayer Switching Protocol (MLSP), use the mls rp ip global configuration command. MLSP is the protocol that runs between the switches and routers. Use the no form of this command to disable MLS.

mls rp ip

no mls rp ip

Syntax Description

There are no arguments or keywords for this command.

Default

The default is MLS disabled.

Command Mode

Global configuration

Usage Guidelines

This command first appeared in Cisco IOS Release 11.3(3) WA4(4).

Use this command to enable MLS, either globally or on a specific interface.

Example

The following example enables MLS:

mls rp ip

Related Commands

You can search online at www.cisco.com to find documentation of related commands.

mls rp management-interface

mls rp nde-address

mls rp vlan-id

mls rp vtp-domain

show mls rp

show mls rp vtp-domain