To display switching counts for MDS and other fast-switching statistics, use the show ip pim interface count EXEC command.
show ip pim interface [type number] count
Syntax | Description |
---|---|
type number | (Optional) Interface type and number. If these arguments are specified, information is displayed about that interface only. |
EXEC
This command first appeared in Cisco IOS Release 11.2(11)GS.
Use this command on the RP.
The following is sample output from the show ip pim interface count command:
Router# show ip pim interface count
Address Interface FS Mpackets In/Out
128.223.224.8 Ethernet1/0/0 D 4/0
128.223.225.1 Ethernet1/0/1 D 0/0
128.223.222.8 Fddi3/0/0 D 20182993/56931
128.223.156.1 FastEthernet3/1/0 D 59991/462385
137.39.26.98 Tunnel0 * 394681/10686513
128.223.90.13 Tunnel1 * 517821/7185605
128.223.90.25 Tunnel3 * 26282/20027641
128.223.90.29 Tunnel4 * 2415/8688961
Table 16-8 describes the fields in the display of the show ip pim interface count command.
Field | Description |
---|---|
Address | Source address of the IP multicast packet. |
Interface | Interface on which the packets are arriving. |
FS | D indicates that the packets were distributed switched. |
Mpackets In/Out | Number of multicast packets received/number of multicast packets sent out. |
13.58.185.199