name elan-id
To configure the ELAN ID of an emulated LAN in the LECS database to participate in MPOA, use the name elan-id LANE database configuration command. To disable, use the no form of this command.
name name elan-id id
no name name elan-id id
| Syntax | Description |
|---|---|
| name | Specifies the name of the emulated LAN. |
| id | Specifies the identification number of the emulated LAN. |
Default
No ELAN ID is configured.
Command Mode
LANE database configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 12.0.
To participate in MPOA, a LEC must have an ELAN ID. The LEC obtains the ELAN ID from the LECS. In case the LEC bypasses the LECS phase, the LEC can get the ELAN ID from the LES by using the name elan-id command.
Example
The following example sets the ELAN ID to 10 for emulated LAN named MYELAN:
name MYELAN elan-id 10
Related Commands
You can search online at http://www.cisco.com to find documentation of related commands.
lane server-bus