- Copyright
- Feedback Information
- Acknowledgments
- Cisco IOS Switching Services Overview
- Cisco IOS Switching Paths
- Cisco Express Forwarding
- NetFlow Switching
- Tag Switching
- Tag Switching Overview
- Configuring Tag Switching
- Tag Switching Commands
- router traffic-engineering
- show ip traffic-engineering
- show ip traffic-engineering configuration
- show ip traffic-engineering routes
- show tag-switching atm-tdp bindings
- show tag-switching atm-tdp capability
- show tag-switching atm-tdp summary
- show tag-switching forwarding-table
- show tag-switching interfaces
- show tag-switching tdp bindings
- show tag-switching tdp discovery
- show tag-switching tdp neighbors
- show tag-switching tdp parameters
- show tag-switching tsp-tunnels
- Command Mode
- Usage Guidelines
- Sample Display
- Related Commands
- tag-switching advertise-tags
- tag-switching atm allocation-mode
- tag-switching atm control-vc
- tag-switching atm maxhops
- tag-switching atm vc-merge
- tag-switching atm vpi
- tag-switching ip (global configuration)
- tag-switching ip (interface configuration)
- tag-switching mtu
- tag-switching tag-range downstream
- tag-switching tdp discovery
- tag-switching tdp holdtime
- tag-switching tsp-tunnels (global configuration)
- tag-switching tsp-tunnels (interface configuration)
- traffic-engineering filter
- traffic-engineering route
- tunnel mode tag-switching
- tunnel tsp-hop
- Multilayer Switching
- Multilayer Switching Overview
- Terminology
- Key MLS Features
- Introduction to Multilayer Switching
- Multilayer Switching Implementation
- Standard and Extended Access Lists
- Restrictions on Using IP Router Commands with MLS Enabled
- General Guidelines
- Software and Hardware Requirements
- Guidelines for External Routers
- Features That Affect MLS
- Configuring Multilayer Switching
- Multilayer Switching Commands
- Multilayer Switching Overview
- Multicast Distributed Switching
- Virtual LANs
- Routing Between Virtual LANs Overview
- Configuring Routing Between with ISL Encapsulation
- Configuring Routing Between VLANs with IEEE802.10 Encapsulation
- LAN Emulation Overview
- Configuring LAN Emulation
- LAN Emulation Commands
- clear atm vc
- clear lane le-arp
- clear lane server
- client-atm-address name
- default-name
- lane auto-config-atm-address
- lane bus-atm-address
- lane client
- lane client-atm-address
- lane config-atm-address
- lane config database
- lane database
- lane fixed-config-atm-address
- lane global-lecs-address
- lane le-arp
- lane server-atm-address
- lane server-bus
- name elan-id
- name preempt
- name local-seg-id
- name server-atm-address
- show lane
- show lane bus
- show lane client
- show lane config
- show lane database
- show lane default-atm-addresses
- show lane le-arp
- show lane server
- MPOA Overview
- Configuring the MPOA Client
- Configuring the MPOA Server
- MPOA Commands
- atm-address
- clear mpoa client cache
- clear mpoa server cache
- holding-time
- keepalive-time
- lane client mpoa client name
- lane client mpoa server name
- mpoa client config name
- mpoa client name
- mpoa server config name
- mpoa server name
- mpoa server name trigger ip-address
- network-id
- shortcut-frame-count
- shortcut-frame-time
- show mpoa client
- show mpoa client cache
- show mpoa client statistics
- show mpoa default-atm-addresses
- show mpoa server
- show mpoa server cache
- show mpoa server statistics
- Index
Chapter 14. Multilayer Switching Commands
This chapter documents commands used to configure MLS in CiscoIOS software. For guidelines on configuring MLS, refer to Chapter 13, "Configuring Multilayer Switching."
Note
Beginning with Cisco IOS Release 11.3, all commands supported on the Cisco 7500 series routers are also supported on Cisco 7000 series routers.
-
No Comment
..................Content has been hidden....................
You can't read the all page of ebook, please click here login for view all page.