It's rare to have a drawing project fit on one sheet. Most CAD projects require multiple sheets, sometimes numbering in the hundreds. With multiple sheets in a project, you often spend a fair amount of time checking cross-references between the drawings and making sure that information like sheet titles is correct.
Even the smallest project requires some coordination of cross-references between drawings in a set and checking for consistency across sheets. For example, a floor plan of a house will have callout symbols that direct you to a sheet with building elevations, construction details, or door and window schedules. As a CAD user, you eventually spend a lot of time just making sure that you have your set of drawings in the proper order and labeled correctly. Checking a set of drawings for continuity and correctness is a time-consuming job, and errors can easily creep in.
To help make your sheet coordination efforts easier, AutoCAD 2010 offers the Sheet Set Manager. (If you're an LT user, you may be interested in the information presented here, but the Sheet Set Manager isn't available in AutoCAD LT 2010.)
Understand sheet sets
Create a sheet set from an existing project
Manage title blocks and cross-references
Customize sheet sets
Archive, publish, and eTransmit sheet sets
The Sheet Set Manager is a tool that keeps track of all the drawings in a project. It also helps maintain the integrity of cross-references between sheets in a set of drawings by automatically updating sheet numbers throughout a set as sheets are added or moved. The Sheet Set Manager won't replace a careful check of a set of drawings before they're released for consumption, but it will reduce the amount of time you spend on coordinating and checking the drawings.
Sheet sets and the Sheet Set Manager can be a bit difficult to understand clearly, so in the following sections, you can take a moment to get a better idea of what sheet sets are all about.
To better understand how sheet sets work, it helps to consider the methods used to organize AutoCAD files. One common method for organizing files is to separate drawings into two categories: reference files and sheet files. You can think of reference files as the data sources. These are the drawing files that contain the core drawing geometry of a project. For example, they might be the floor plan drawings that contain the paving, finish, ceiling, and power information, all drawn in Model Space.
Sheet files are files that represent the actual printed sheets or pages in the drawing set. Sheet files include title block information as well as the different views of the reference files needed for the sheet. They also include view titles and scale information.
You use one layout view in the sheet file for each physical sheet that eventually gets printed. The reference files are included as Xrefs in the sheet files with the appropriate views and layers set up for each sheet.
For example, you might have one sheet file called A1 Floor Plan.dwg that has a title block in its layout view. That layout view has a viewport containing a view of an Xref floor plan file. Another sheet file called A2 Enlarged Plan.dwg might contain the same Xref but with a layout view including multiple viewports to show a more detailed set of views of the plan.
The Sheet Set Manager can take this reference/sheet system of file organization and automate it. Without the Sheet Set Manager, you must create the sheet file, import the reference file, and then add a title block, viewport, and labels to produce a finished sheet. The Sheet Set Manager automates many of the fussy details of creating and maintaining the sheet files.
Sheet sets also serve as a way to gain an overview of your drawing set in a way similar to using the table of contents of a book. When you use the Sheet Set Manager, you can view a list of all the drawings in your project and quickly find and open the drawing you need to work on.
You can think of the Sheet Set Manager as a database that contains information about the drawings in the set. It uses a file with the .dst filename extension to store this information. Like a database, this file is updated automatically whenever you make changes to the sheet set. It doesn't wait for you to save the sheet set data manually. In fact, you won't see a Save option in the Sheet Set Manager.
The Sheet Set Manager can change multiple drawing files whenever a change affects the entire set. For example, if there is a change in the project information in the title block, you can update all the title blocks in the set by making a single change in the Sheet Set Manager. The Sheet Set Manager can keep track of title-block data such as submission dates, drawing titles, people who have worked on the individual drawings, and related information.
Finally, the Sheet Set Manager can help simplify the printing of whole sets of drawings by automatically setting up AutoCAD's Publish feature. It can help automate your archiving tasks and help collect all the necessary files to send your set to a different location for editing.
As an introduction to sheet sets, you'll first create a sheet set from an existing set of drawings. You'll then see how your sheet set can be used as a way to keep track of the files in a project.
This example is a small house remodel with some basic drawings. Although the project is small, it will show you the main elements of the Sheet Set Manager.
The Create Sheet Set Wizard is the main tool you'll use when creating a sheet set. It offers a step-by-step method for setting up new sheet sets, and, as with all wizards, you can back up and make changes along the way. Here's how to use it:
Click the drop-down list at the top of the palette, and select New Sheet Set to start the Create Sheet Set Wizard.
Click the Existing Drawings radio button, and then click Next. The Sheet Set Details screen of the wizard appears (Figure 30.2).
Enter My Existing Sheet Set for the name of the sheet set.
Enter My first sheet set using samples from Mastering AutoCAD in the Description text box.
Browse to and open the location of the
Sheet Set Sample 1folder, which is in theProjectsChapter 30folder. This is a folder created when you installed the Mastering AutoCAD sample files.Click Next. The Choose Layouts screen of the wizard appears.
Click the Import Options button to open the Import Options dialog box (Figure 30.3).
Make sure all three options are selected, and then click OK. You'll learn more about the options in this dialog box in the next section.
Click the Browse button, and then locate and select the
Sheet Set Sample 1folder you selected earlier. After you've selected the folder, you see the list of subfolders in that folder.
Click the plus signs to expand the listings for
ArchitecturalandStructural(Figure 30.4). You see the drawings in those folders. Expand the list for each drawing to see the layouts available in each drawing. You can select and deselect the layouts and drawings to include in the sheet set. Your list may not be in the same order as shown here, but the contents will be basically the same.Remove the check mark next to the
Resourcefolder shown in the list. You don't want to include theResourcefolder because that contains the files used as Xrefs in the Paper Space files. You want to select only the drawings and layouts that represent the sheets in your set.Click Next. You see the last screen of the wizard, which shows you the statistics of your new sheet set. It shows only the layouts from the selected drawings because the layouts are the focus of the Sheet Set Manager. Click Finish to exit the wizard. AutoCAD creates a new sheet set.
Select the Sheet List tab in the Sheet Set Manager to view its contents. The Sheet Set Manager now shows a list of the drawings in the
Sheet Set Sample 1folder (Figure 30.5). It didn't display the main folder calledSheet Set Sample 1because the Ignore Top Level Folder option is on (see 'Formatting Sheet Sets with the Import Options' in the next section).
The sheet list in the Sheet Set Manager shows the name of the existing drawing files with the layout name appended. This helps you identify both the filename and the layout associated with the sheet. As you become more familiar with the Sheet Set Manager, you can choose to display only the layout name.
Although you have more work to do before the sheet set becomes a useful tool, it's complete enough that you can explore some features of the Sheet Set Manager before you add the resource drawings.
In step 9 of the preceding exercise, you saw the Import Options dialog box. This dialog box lets you control how files and folders are organized in the Sheet Set Manager and how the sheets are assigned names. Here is a list of these options:
- Prefix Sheet Titles With File Name
The Sheet Set Manager displays only the layout names in its sheet list. With this option selected, the Sheet Set Manager adds the name of the file containing the layout as a prefix to the sheet name. If you want only the layout name to appear in the sheet list, turn off this option.
- Create Subsets Based On Folder Structure
If you set up your file structure to separate your project folder into subfolders (such as architectural, mechanical, structural, and civil), you can retain that structure in the Sheet Set Manager by selecting this option. Turn off this option if you want the Sheet Set Manager to display all the sheets in your project in a single column with no subfolders.
- Ignore Top Level Folder
When you select a project folder containing your drawings for the sheet set and subfolders are used to keep separate categories of drawings organized, this option causes the Sheet Set Manager to ignore the top-level folder and display only the subfolders. This is useful if you have one main folder that contains subfolders of your drawings.
The sample folders you used for the previous exercise were set up to demonstrate how these options work. All the options were turned on. As a result, the Sheet Set Manager displayed the sheets with two main categories, Architectural and Structural, reflecting the folder structure of the sample project files. The sheet names showed the layout names appended to the drawing filenames because the Prefix Sheet Titles With File Name option was turned on.
Setting the Sheet Set Properties
In the Sheet Set Details screen of the Create Sheet Set Wizard is a button labeled Sheet Set Properties. If you click this button, the Sheet Set Properties dialog box opens, showing you some of the settings that are part of your new sheet set.
Much of this information describes the location that the Sheet Set Manager will use as you work with sheet sets. Also note the Edit Custom Properties button at the bottom of the dialog box. This enables you to add or edit some of the properties of the sheet set. This information can be edited in the Sheet Set Manager, as you'll see later.
You can view quite a bit of information about the drawings in your list. You can also open a file by double-clicking its name in the Sheet List. Here's how:
Select 1 - A1 Plan - 22x17 Arch Layout - Plan from the Sheet List. A panel appears (Figure 30.6) and displays a description of the sheet, including a thumbnail view and the name, location, and size of the file that contains the sheet.
Double-click the 1 - A1 Plan - 22 × 17 Arch Layout - Plan listing. AutoCAD opens the drawing.
Now you'll add the resource drawings to the Sheet Set Manager's sheet list. Remember that the resource drawings are the source Xref files for the sheet drawings. By adding them to the Sheet Set Manager, you'll have ready access to all the files in your project:
Double-click the Add New Location item. A standard file dialog box opens.
Locate and select the
Resourcesubfolder under theSheet Set Sample 1folder that you've been using, then click Open. The Sheet Set Manager palette displays the list of drawings in that folder.Double-click
plans.dwg. Theplansfile opens, showing you the source drawing for the 1 - A1 Plan drawing.
Your sheet set now contains a list of all the files in the project. You can use the Sheet Set Manager to keep track of your AutoCAD files as the project progresses. If you need to plot all your sheets, archive them, or move them, you can do so with relative ease by using options described toward the end of this chapter.
Now that you've created a sheet set from an existing project, as the project continues you'll want to use the Sheet Set Manager to create any new sheets that you want to add to your set. Doing so ensures that the Sheet Set Manager knows about all the files in the project at all times.
But before you start to add new sheets, you need to do a bit of setup. You'll need to make sure the Sheet Set Manager knows which template file to use for any new sheet drawings you add to the set.
The following exercise will show you how to tell the Sheet Set Manager which template file to use for new sheets:
Right-click My Existing Sheet Set at the top of the Sheet List, and then select Properties. The Sheet Set Properties dialog box opens. (See the sidebar "Setting the Sheet Set Properties" earlier in this chapter.) You see three groups of listings: Sheet Set, Project Control, and Sheet Creation. The Sheet Set group offers information about the current sheets and sheet set. The Project Control group lets you add information regarding the sheet set, such as the project name, number, and milestones. The Sheet Creation group lists information about new sheets.
Click the Sheet Creation Template option in the Sheet Creation group. If you can't read the names of the options, hover your cursor over a name and the full option name will appear as a tool tip. A Browse button appears to the right of the option.
The Drawing Template File Name text box shows the location of the current default file from which a new sheet will be derived. That default location is as follows:
C:Documents and SettingsUser NameLocal Settings Application DataAutodeskAutoCAD 2010R18.0enu TemplateSheetSetsArchitectural Imperial.dwt
Also note that a layout name is listed in the Select A Layout To Create New Sheets list box.
Continue to select a template file. Click the Browse button to the far right of the Drawing Template File Name text box to open the Select Drawing dialog box. This is a standard file dialog box.
Browse to the
Chapter 30Sheet Set Sample 1Resourcefolder, select the22 × 17 Arch.dwtfile, and then click Open. This is the template file used for the sheet drawings of the set you've been working with.Back in the Select Layout As Sheet Template dialog box, select Architectural Title Block from the Select A Layout To Create New Sheets list, then click OK. Click OK in the Sheet Set Properties dialog box.
A confirmation window asks whether you want to apply the change you made to all nested subsets. Click Apply Changes To Nested Subsets.
You've just set up your sheet set to point to a custom template that contains the title block for any new sheet files you may create. The last step points out a feature of which you'll want to be aware.
In this exercise, you set the 22 × 17 Arch.dwt template file to be the file the Sheet Set Manager uses for all new drawings. If you prefer, you can set up the Sheet Set Manager to use different template files for new sheets in the sheet subsets. For example, you can have one template for the Architectural subset and a different one for the Structural subset, if they require different title blocks.
To set up the template for the subsets, follow the steps in the previous exercise, but instead of right-clicking My Existing Sheet Set, select the subset name. In the Sheet Set Sample 1 sheet set, the name would be Architectural or Structural.
Another option is to select the Prompt For Template option near the bottom of the Sheet Set Properties dialog box. As the option name indicates, it prompts you for a template file whenever you create a new sheet.
You're ready to create new sheets that are based on the same title block as the existing sheets in the set:
In the Sheet Set Manager palette, right-click the Architectural subset listing, and select New Sheet to add a sheet under this heading. The New Sheet dialog box opens.
In the Number text box, enter A4, and in the Sheet Title text box, enter Details. As you type, the File Name text box is automatically filled in. You can enter a different sheet title if you like.
Click OK to finish creating your new sheet. Your new sheet appears in the sheet list of the Sheet Set Manager palette.
Double-click the A4 - Details listing in the sheet list. The A4 Details drawing opens to the layout view. The layout view has been given the name A4 Details, which you can check by clicking the Quick View Layouts tool in the status bar.
After reviewing these steps, you can close all the drawings (except for Drawing1) and the Sheet Set Manager.
Before you added the new A4 Details sheet, the Sheet Set Manager was only collecting data about your sheet set and displaying that data in the palette. It hadn't created any new files. In the preceding exercise, the Sheet Set Manager created the A4 Details file, although it didn't open it until you double-clicked it in step 4.
Now that the A4 sheet has been created, you can edit it as you would any other drawing to include Xref files, blocks, or other drawing data. You can then create a viewport in the layout to arrange the sheet the way you want.
In a large project with many sheets, managing title-block information can be a lot of work. In the next section, you'll look at some other sheet set features that can automate much of the work of maintaining title-block information. You'll also learn how the Sheet Set Manager can simplify the creation of callout bubbles and cross-references between drawings.
You've just seen that at a basic level, you can use the Sheet Set Manager to keep track of files in a set of drawings. But other features can help reduce the time it takes to create and maintain sheets. In this section, you'll look at some of the more advanced sheet set features by creating a sheet set based on an existing one.
The Sheet Set Manager can use specially designed template files to automate the creation and management of your sheets. You can include fields (see Chapter 11 for more on fields) that are sheet set aware, enabling the Sheet Set Manager to update text automatically whenever there is a change in the sheet set. In addition, the Sheet Set Manager can use blocks with field attributes to automate the process of adding drawing titles and reference symbols, called callout blocks, in the Sheet Set Manager. You can customize these templates and callout blocks to fit your particular style of drawing and method of organization.
To see firsthand how the Sheet Set Manager can help you manage title blocks and cross-references, you'll create a new sheet set based on an existing sample sheet set created by Autodesk. You'll use a sample sheet set found in the user template folder for new AutoCAD 2010 installations. This sample sheet set uses a template file that has the title block and callout blocks already set up and available for use.
Just as before, you'll start by opening the Create Sheet Set Wizard. Follow these steps:
Open a new, blank file. Click the drop-down list at the top of the palette, and select New Sheet Set to start the Create Sheet Set Wizard.
Make sure the An Example Sheet Set radio button is selected and click Next. The Sheet Set Example screen appears. Here you can select from the standard sheet set examples provided by Autodesk. Or, if you have a custom sheet set or sheet sets from a third party, you can use the Browse To Another Sheet Set To Use As An Example option.
Make sure the Select A Sheet Set To Use As An Example radio button is selected. Then select Architectural Imperial Sheet Set from the list box and click Next. The Sheet Set Details screen appears.
Enter My Sheet Set in the Name Of New Sheet Set input box. You also have the opportunity to add a description of the sheet set in the Description box. The Store Sheet Set Data File (.dst) Here option lets you determine where the sheet set data file is stored. You can see the current location by placing the cursor over the input box. A tool tip displays the path to the location. This tool tip is useful if the path is too long to read from the input box.
Click the Browse button to the right of the Store Sheet Set Data File input box, and browse to the location of the sample files for this chapter. Typically, this location is
Chapter 30Sheet Set Sample 2. Click Open.Back in the Sheet Set Details screen of the Create Sheet Set Wizard, click Next. The Confirm screen appears. This screen lets you review the settings before you confirm the creation of your sheet set. You've seen this information in the Sheet Set Properties dialog box.
Click the Finish button to create your new sheet set. A list of predefined sheet categories appears in the Sheet List tab of the Sheet Set Manager.
Now, if you check your sample file folder, Chapter 30Sheet Set Sample 2, you'll find the My Sheet Set.dst file that you've just created. As you've seen in prior steps, this file holds the information regarding the location of the files and custom settings for your sheet set.
The first sheet set you created was from drawings that already had Xrefs and views set up for the sheets. The next section shows you how to use the Sheet Set Manager to create a sheet from scratch, including views and Xrefs.
The sheet set you just created is like the framework of your set of plans. It isn't the actual set of drawings but rather a structure onto which you can start to build your set of drawings. The Sheet Set Manager manages the coordination and continuity of the set as you add sheets to the set.
To see how these drawing components are managed by the Sheet Set Manager, you'll create some sheets from existing Model Space files. You'll start by adding a couple of floor plans to the sheet set.
You'll use the resource drawings that you saw in the first set of exercises in this chapter as the basis for the new sheets.
The Sheet Set Manager uses drawing views to help simplify the creation of viewports in a sheet, so you'll start by creating some views in a plan drawing. These views will define the areas and layer settings that will be needed later when you create the plan sheets. Follow these steps:
Open the
plans.dwgfile from theChapter 30Sheet Set Sample 2Resourcefolder. You see two plans of the house. The top plan is a floor plan, and the lower plan is a combination of a floor plan and a site plan.Click Plan_site from the Layer State drop-down list in the Home tab's Layers panel.
You've just restored a layer state that shows all the appropriate layers for the site plan. Next you'll save a view of just the site plan, which you'll use a bit later when you create the site plan sheet:
Make sure Current is selected in the list to the left. Then click the New button.
In the New View dialog box, click the New button, and then in the New View/Shot Properties dialog box, enter Site Plan for the view name.
Place a selection window around the area shown in Figure 30.7. Don't worry if you don't get it right the first time. You can use a selection window repeatedly until you have the view you want.
Press
Back in the New View/Shot Properties dialog box, make sure the Save Layer Snapshot With View option is selected, and click OK.
Click OK in the View Manager dialog box to close it.
You've just created a view for the site plan. Now create another view for the floor plan:
Next, go to the Home tab's Layers panel and select Plan_finish from the Layer State drop-down list.
Choose Named Views from the View tab's Views panel or type V
Make sure Current is selected in the left panel. Then click New.
In the New View/Shot Properties dialog box, enter Floor Plan for the view name. Click the Define View Window button. Then place a selection window around the area shown in Figure 30.8. Press
Back in the New View/Shot Properties dialog box, click OK. Then click OK in the View Manager dialog box to close it.
Choose Save from the Application menu to save the changes you've just made, and then close the
plans.dwgfile.
If you know that you want to use other views for your sheets, you can continue to define more views. But for this exercise, let's move on to creating a sheet from the views you just created.
Now that you have some views defined, you're ready to create a sheet for those views:
Select Architectural from the list, right-click, and select New Sheet to open the New Sheet dialog box.
Enter A1 in the Number input box. This defines the sheet number that will appear in the lower-right corner of the sheet. As you type, your entry appears in both the Number input box and the File Name input box.
Enter Site Plan And Floor Plan in the Sheet Title input box. Again, as you type, your entry appears in both the Sheet Title input box and the File Name input box.
Click OK. AutoCAD creates a new file called
A1 - Site Plan and Floor Plan, and the new drawing name appears as a subhead below Architectural in the Sheet Set Manager.Double-click the A1 - Site Plan And Floor Plan listing. The sheet appears in AutoCAD.
If you look closely, you'll notice that the sheet number is already in place in the lower-right corner of the drawing. The Sheet Set Manager was able to apply the sheet number you entered in step 3 to the new sheet because the template uses a field for the sheet-number text. You'll learn how to add such a field to your own title block later in this chapter. For now, you'll add the views you created in the plans.dwg file to this new sheet.
You've created views in your plans.dwg resource drawing, and you've created a new sheet for the Plan views. The next step is to insert those saved views into the sheet.
Start by adding the resource drawings to the sheet set:
With the resource files added to the Sheet Set Manager, you can add a view to the A1 sheet from the plans.dwg file you worked on earlier:
Click the plus sign next to the
plans.dwgitem. The list expands to show the Site Plan and Floor Plan views you created earlier in this chapter.Make sure the A1-Site Plan And Floor Plan drawing is current; then select Site Plan from the list, right-click, and choose Place On Sheet. Don't click your mouse yet, but as you move the cursor over the A1 - Site Plan And Floor Plan layout, a rectangle appears at the cursor and covers most of the drawing.
Right-click in the layout view to display a list of drawing scales.
Select ⅛″ = 1′ from the list. You see the Site Plan view of
plans.dwgalong with a title bubble, all following the cursor (Figure 30.9). You can also click and drag the Site Plan view from the list into the sheet to get the same result.Place the view in the top half of the layout and click. The Site Plan view is placed in the layout along with a title bubble, drawing scale, and view title.
Back in the Sheet Set Manager, select Floor Plan from the list. Right-click and select Place On Sheet.
Right-click in the Layout view, and select ¼″ = 1″ from the list.
Place the view in the lower half of the layout and click. The Floor Plan view is placed in the layout along with a title bubble, drawing scale, and view title.
Zoom in to the title bubble for the Site Plan view. It already has the proper view name and scale.
In the preceding exercise, the Sheet Set Manager performed several steps that you could have done manually with much more effort. It imported the plans.dwg file as an Xref into the A1 - Site Plan And Floor Plan layout. It then created a viewport in the layout, it scaled the layout view according to your selections in steps 4 and 7, and finally, it added a title bubble and the title and scale for each view.
You need to take care of one more item for this sheet. Although the view names and scales have been provided by the Sheet Set Manager, you still need the view numbers. Right now they're just three dashes. Follow these steps:
In the Sheet Set Manager, select the Sheet Views tab.
Expand the A1-Site Plan And Floor Plan list, and select Site Plan; then right-click and select Rename & Renumber to open the Rename & Renumber View dialog box (Figure 30.10).
Enter 1 in the Number input box. The name of the view is available for editing as well.
Click the Next or Previous button, whichever is available for selection. This advances the data in the dialog box to the next view, which is the Floor Plan view. Enter 2 in the Number input box. Once again, you see the name of the view.
Type Re
The final task is to hide the viewport borders. You can do this by creating a layer just for the viewports and then turning off that layer:
Use the Layer Properties Manager to create a layer called Viewport.
Turn off the Viewport layer, and click OK to close the Layer Properties Manager.
Select the two viewports. Select Viewport from the Layer drop-down list in the Home tab's Layers panel. A warning message tells you that the layer you've assigned to the selected objects is frozen or turned off. Click OK. The viewports disappear.
Adding the view numbers is important for two reasons. The obvious one is so that you have a number you can refer to when referencing this plan sheet in the future. But the Sheet Set Manager also keeps track of this view number so that later, when you start to add callout blocks to your drawing set, the Sheet Set Manager knows which view goes with the callout block you're adding. The next section will show you how this works.
As mentioned earlier, in the process of building a set of drawings, you'll have to add cross-reference symbols. One common type of cross-reference indicates an elevation view of a building from a floor plan.
In a typical set of architectural drawings, you'll have a sheet or several sheets that show the sides of a building. The most common views are the north, south, east, and west sides of a building. Elevation drawings are used to indicate window locations, wall finishes, building heights, floor levels, and other key elements in the design. Reference symbols, called callout blocks in AutoCAD, are placed in the floor plan and tell the viewer which sheet contains these elevation drawings and show from where the view is taken in relation to the plan.
In this section, you'll learn how to set up an elevation view and place callout blocks in the floor plan that show which sheet contains the elevation. You'll see how callout blocks are tied to sheet numbers so that even if a sheet number changes, the callout block always indicates the right sheet number.
You'll use a sheet set similar to the one you just started, but with a few additions to save some work for you. The My Sheet Set 1.dst sheet set has the A1-Site Plan And Floor Plan sheet already created and an additional sheet called A2 Elevation Plan. This additional sheet contains two elevation views. These elevation views were created in the same way as the Plan views in the previous exercise, so no method was used to create them that you haven't already been shown.
In the following steps, you'll add a callout block to the A1 sheet that references the A2 sheet. Along the way, you'll become familiar with some of the other features of the Sheet Set Manager.
Start by closing the current sheet set and the files associated with it:
In the Sheet Set Manager, select the Sheet List tab.
Right-click My Sheet Set in the list, and choose Close Sheet Set.
Close and save any drawing that may be open except the blank default drawing file.
Next, open the sample sheet set:
Click Open from the drop-down list. Then, in the Open Sheet Set dialog box, locate and select
My Sheet 1.dstin theChapter 30Sheet Set Sample 3folder. Click Open in the Open Sheet Set dialog box.Make sure the Sheet List tab is selected, then double-click A1-Site Plan And Floor Plan and A3 Elevations to open these two files.
Next you'll add the callout symbol to the A1 sheet. In the next few steps, you will be adding callout symbols based on preexisting views from the A2-Elevations drawing:
In the Sheet List tab of the Sheet Set Manager, double-click the A1 sheet again. Because it's already open, double-clicking the A1 sheet makes it the current drawing file.
Enlarge your view of the floor plan so it looks similar to Figure 30.11.
Click the Sheet Views tab, then select and right-click 1 - South Elevation.
Choose Place Callout Block
Position the callout block as shown in Figure 30.11 for the south elevation and click. The callout block already shows the appropriate drawing number and sheet number.
Right-click 2 - West Elevation, and choose Place Callout Block
Place this callout block to the left of the floor plan, as shown in Figure 30.11.
When you inserted the callout blocks in steps 4 through 7, the Sheet Set Manager automatically added the appropriate sheet and view number to the block. This action saves you the effort of checking which drawing contains the elevation view and of making sure the numbers between the callout block and view match.
Suppose you need to change the sheet number of the elevation sheet from A2 to A3 to make room for a demolition plan. The following exercise demonstrates how the Sheet Set Manager can make quick work of such a change:
As you saw from this exercise, the drawing numbers are coordinated through settings in the Sheet Set Manager as long as you use the callout symbols from the Sheet Set Manager.
Drawing numbers aren't the only part that can be managed through the Sheet Set Manager. You have two sheets in the set now, but they were created without regard for the client name and address in the title block. You'll need to go back and add this information to the sheets. Here's a quick way to do it:
In the Sheet List of the Sheet Set Manager, right-click My Sheet Set 1 at the top of the list box, and then choose Properties to open the Sheet Set Properties dialog box (Figure 30.12).
Scroll down to the lower half of the Sheet Set Properties dialog box, where you see a set of options labeled Sheet Set Custom Properties. Click the Project Address 1 label, and enter 444 Crescent Way for the first line of the address. (Or you can add any street address you like.) You may need to widen the first column to read the label or hover over the label to see a tool tip showing the full label.
In the next option, Project Address 2, enter Big Bear, CA.
Enter Smith Residence for the project name.
Leave the Client, Project Number, and Project Address 3 options blank. Click OK.
Zoom in to the lower-right corner of the sheet so you can clearly see the title-block information, and then click View
The changes you made in this exercise affect all the existing sheets in the set. If you add new sheets, they will also display the new address and project name.
By now, you have two sheet sets open: the one you created from an existing set of drawings and the one you opened for the latest set of exercises. In the next sections, you'll look at customizing sheet sets. You won't need both sheet sets open. Close the one you've been working on by following these steps:
Click the drop-down list at the top of the Sheet Set Manager.
Right-click My Sheet Set 1, and select Close Sheet Set.
As you can see, you can have multiple sheet sets open at any one time. This feature can facilitate the movement of drawing data from one project to another. For example, you may want to borrow construction details from one set to add to a new set. You can use the Sheet Set Manager to locate the detail sheet from the prior project and then cut and paste drawing data from that drawing into a drawing in your most current project.
In the preceding section, you created and used a sheet set that was based on a canned sheet set from Autodesk. That sheet set included a title block with many of the field text objects already embedded so you could take advantage of the Sheet Set Manager's ability to control the text in the title block. The view title bubbles and callout blocks were also supplied, and they contained the field text objects to automate the insertion of view names and coordination of callout cross-reference numbers.
But not everyone will want to use the title blocks and symbols offered in the Autodesk samples. You aren't limited to using the canned sheet set from Autodesk. In the following sections, you'll look at how to customize your own title block to work with the Sheet Set Manager. You'll also learn how to create custom view titles and callout blocks.
To begin your exploration of sheet set customization, you'll add field objects to the sample title block you used at the beginning of this chapter. Remember that the first project included an existing set of drawings that wasn't set up to take full advantage of all the sheet set features you saw in the latest set of exercises. The title block in that early exercise contained some attributes that could be used to include text information, but the title block was not sheet set aware. To prepare a title block for use with the Sheet Set Manager, you'll need to convert those attribute values into field objects. This entails editing the title block and saving it as the template file for the sheet set.
The first thing you'll do is set up the title block to create a sheet-set-aware number and title. This will enable the Sheet Set Manager to control the number and title that appears in the title block, as you saw in earlier exercises.
You could open the template file and start editing the title block without involving the Sheet Set Manager in any way. But now, in the following set of exercises, you'll edit the template file with a little help from the Sheet Set Manager. By using the Sheet Set Manager while editing your template file, you'll be able to get instant feedback on your edits.
Start by creating a new sheet in the sheet set you created in the beginning of this chapter. You'll use this new sheet to edit the title block. Follow these steps:
If it's closed, open the sheet set named My Existing Sheet Set. Remember that this was the first sheet set in the
Chapter 30Sheet Set Sample 1folder. You can open it by selecting RecentIf the Sheet Set Manager is closed, open it by clicking the Sheet Set Manager tool in the View tab's Palettes panel.
In the sheet list, right-click the sheet set name at the top of the list and choose New Sheet.
In the New Sheet dialog box, enter 000 for the sheet number and Template Edit for the sheet title. Click OK. The sheet number and title can be anything because this isn't a sheet you'll save.
In the Sheet Set Manager, double-click 000 - Template Edit. The sheet you just created appears in the AutoCAD window.
Remember that a new file based on a template is really just a copy of the template. As I mentioned earlier, the title block is an AutoCAD block that contains attribute definitions. To edit those definitions, you'll need to explode the block:
Click the title block to select it.
Now you're ready to edit the attribute definitions. Start by editing the definition for the sheet number in the lower-right corner of the title block:
Locate the attribute definition that is in the lower-right corner of the title block and shows a large No., and double-click it. This is the attribute definition for the sheet number. The Edit Attribute Definition dialog box opens (Figure 30.13).
Double-click in the Default text box. Right-click it, and choose Insert Field to open the Field dialog box (Figure 30.13).
Select SheetSet from the Field Category drop-down list.
In the Field Names list box, select CurrentSheetNumber.
In the Format list box, select Uppercase. Then click OK.
Back in the Edit Attribute Definition dialog box, the Default text box now shows 000, the number you assigned to this drawing. This tells you that your field attribute is working properly because the default value shows the current sheet number. The gray background of the text tells you that the text is a field.
Click OK to exit the Edit Attribute Definition dialog box.
Press
In step 6, you received instant feedback when you assigned the CurrentSheetNumber attribute field to the attribute definition. The default value changed to the sheet number of the current drawing.
Next you'll make a similar change to add the project name to the title block:
Zoom in to the area of the title block that shows the project information (Figure 30.14).
Double-click the DRAWING_TITLE attribute definition just below the OWNER3 attribute definition.
As in the preceding exercise, select the Default value, right-click, and choose Insert Field.
Select CurrentSheetTitle from the Field Names list, and select Title Case from the Format list.
Click OK. Now the Default value is the current sheet title, Template Edit.
Click OK to accept the changes in the Edit Attribute Definition dialog box.
Press
These two exercises demonstrated how you can add a field object to an attribute definition and have that definition give you immediate feedback about its association to the sheet set. In the first case, the default sheet number in the Edit Attribute Definition dialog box reflected the current sheet number. In the second exercise, you saw that the sheet title appeared.
You've added two of the standard sheet set fields to the title block. The standard fields are the ones that appear in the Field Names list in the Field dialog box. But what if you want to add custom sheet set fields that aren't on the list? You can create your own field categories in the Sheet Set Manager. In the following set of exercises, you'll create some custom fields in the Sheet Set Manager properties dialog box and then add those fields to your title block.
First, set up some new custom fields:
In the Sheet Set Manager, right-click My Existing Sheet Set at the top of the sheet list and choose Properties.
At the bottom of the Sheet Set Properties dialog box, click the Edit Custom Properties button to open the Custom Properties dialog box.
Click the Add button to open the Add Custom Property dialog box.
In the Name text box, enter Project 1. This will be the first line for the project information area in the title block.
In the Default Value text box, enter Project Line 1.
In the Owner group at the bottom of the dialog box, make sure Sheet Set is selected. This tells the Sheet Set Manager that this value applies to all the sheets in the set, not just the individual sheets.
Click OK to return to the Custom Properties dialog box.
Repeat steps 3 through 7 to add two more custom properties called Project 2 and Project 3, with the values Project Line 2 and Project Line 3.
Click OK to close the Custom Properties dialog box, and then click OK in the Sheet Set Properties dialog box.
You've created some custom properties. Now include those properties in your title block:
Pan up to the area in the title block that shows the project information.
Double-click the Project 1 attribute definition. In the Edit Attribute Definition dialog box, highlight the Default text box, right-click, and choose Insert Field.
In the Field Names list box (Figure 30.15), select CurrentSheetSetCustom.
Open the Custom Property Name drop-down list near the bottom of the dialog box, and select Project 1. All the custom properties you created are listed here.
Click OK to return to the Edit Attribute Definition dialog box. The default field value shows Project Line 1, which is the default value you gave for the custom properties in the previous exercise.
Click OK, and then repeat steps 2 through 5 for the Project 2 and Project 3 attribute definitions.
Press
You've just seen how to include custom sheet set properties in your title block. Now you're ready to convert your newly edited title block back into the template file you're using for this sheet set.
First you need to turn your exploded title block back into an AutoCAD block object:
Zoom out so you can see all of the title block.
In the Block Definition dialog box, select 22 × 17Arch Block from the Name drop-down list.
Make sure the Convert To Block radio button is selected in the Objects group.
Click OK. A warning message tells you that you're about to redefine the 22 × 17ArchBlock block. Click Yes.
The Edit Attributes dialog box opens. You don't need to change anything here, so click OK.
The title block now shows the sheet number 000. If you look closely, you'll also see that the sheet title shows Template Edit. These are the name and number you assigned to this sheet when you first created it.
The next task is to save the file as the template file for the current sheet set:
Right-click in the Layout preview panel labeled 000 Template Edit, and choose Rename.
Rename the layout My Title Block.
Choose Save As from the Application menu. In the Save Drawing As dialog box, select AutoCAD Drawing Template (*.dwt) from the File Of Type drop-down list.
Browse to the location of the template file for this sheet set, select
2217 Arch.dwt, and click Save. This location isChapter 30Sheet Set Sample 1Resource. Click Yes in the warning message box.
Normally, at this point you could close the newly saved template file and remove the 000 - Template Edit sheet from the sheet list. However, you'll use this file again when you create other components of the sheet set.
Now you can test the new template to make sure it's working. You'll start by creating a new sheet to check whether the sheet number and title appear correctly:
Taking Advantage of Other Field Options
As you learned in Chapter 11, you can add field objects directly to a drawing if you want drawing data to appear as text. For example, you can add field text directly in a drawing layout to provide information about the author of a drawing, the date the drawing was printed, or the scale to which the layout is set to plot.
This information can be included in small print on the border of the drawing to aid others when they need to know more about the drawing's origin. You can either add the field directly to the drawing by using the Field command or include it in Mtext or Dtext as part of a paragraph or sentence. Here is a list of field options from the Field Category list in the Field dialog box to help you get an idea of what you can include as text in a sheet:
- Date & Time
Lets you add a date and time stamp to your drawing. You can select from a variety of date and time styles or show only a date or only a time.
- Document
Lets you add data from the drawing properties that are stored in AutoCAD by using the Dwgprops command (choose File
- Linked
Lets you add a hyperlink to another file.
- Objects
Lets you include the name or property of an object. For example, you can add a block name as a field text label, or you can add an object's layer.
- Other
Lets you add Diesel expressions or system-variable values as field text.
- Plot
Lets you display plot settings as text in your drawing. This can be useful to help others determine how a drawing was plotted.
- SheetSet
Offers options to help automate many of the labeling chores you normally do when creating sheets.
You also added some custom sheet set properties. Do the following to see if they're working properly:
Right-click My Existing Sheet Set at the top of the sheet list in the Sheet Set Manager and choose Properties.
Toward the bottom of the Sheet Set Properties dialog box, change the value for Project 1 to John Smith Residence.
Change the value for Project 2 to 123 Anystreet. Change the value for Project 3 to Roseville, California.
Click OK.
Type Re
You've customized the title block with custom properties and a sheet-set-aware number and title. Armed with this information, you can customize any title block to take full advantage of the sheet set features.
You can include a lot of information in the title block through the Sheet Set field option. Table 30.l gives you a rundown of the sheet set options to help you decide what you may want to include.
Table 30.1. Field Options Available for Sheet Sets
Field Name | Purpose |
|---|---|
CurrentSheetCustom | Displays custom sheet data. Custom sheet data can be added and edited through the Sheet Set Properties dialog box. |
CurrentSheetDescription | Displays the description for the current sheet found in the properties for the sheet. Select the sheet name from the Sheet Set Manager's Sheet List tab, right-click, and choose Properties. |
CurrentSheetNumber | Displays the current sheet number. |
CurrentSheetNumberAndTitle | Displays the sheet number and title combined into one line of text. |
CurrentSheetSet | Displays the name of the current sheet set. |
CurrentSheetSetCustom | Displays a custom value for the current sheet set. |
CurrentSheetSetDescription | Displays the sheet set description, which can be found in the Sheet Set Properties dialog box. |
CurrentSheetSetSubSet | Displays the name of a subset of the current sheet set. |
CurrentSheetTitle | Displays the current sheet title. |
SheetSet | Displays any standard sheet set value (such as sheet number and title, sheet title, sheet number, or sheet description) from any sheet in the sheet set. |
SheetSetPlaceholder | Displays standard sheet set values from within callout blocks. |
SheetView | Displays sheet set view data such as view title, view number, and view scale. |
CurrentSheetCategory | Displays a category field. |
CurrentSheetIssuePurpose | Displays an Issue Purpose field. |
CurrentSheetRevisionDate | Displays a Revision Date field. |
CurrentSheetRevisionNumber | Displays a Revision Number field. |
Displays a Project Milestone field. | |
CurrentSheetProjectName | Displays a Project Name field. |
CurrentSheetProjectNumber | Displays a Project Number field. |
CurrentSheetProjectPhase | Displays a Project Phase field. |
In the earlier section "Managing Title Blocks and Cross-References," you learned how to create a new sheet set from an existing one. You saw that the Sheet Set Manager was able to create a viewport and add a view label automatically, including a view number bubble, a view title, and the scale for the view. Just like the title block, the view label you used in the section "Adding Your Views to the New Sheet" was a block with field attribute values. You can create your own view label block or edit an existing one by using the methods you've already seen for the title block. Callout blocks are also created and edited in the same way.
In this section, you'll create a custom view label. This will help you to understand which field attributes are used for the view label. You'll also learn how to set up the Sheet Set Manager to use your custom block.
Just as with the title block, you could create the view label block in AutoCAD without using the Sheet Set Manager, but using the Sheet Set Manager simplifies your work and also helps verify that you're on the right track. You'll start by going back to the template file you edited earlier, and then you'll create the graphics and attribute definitions for your custom view label. Follow these steps:
Close the
A5 Schedules.dwgfile and return to the22 × 17 Arch.dwtfile that you updated in the earlier exercise. You can use the Windows menu in the menu bar to return to the file. You'll add the view label block to this drawing.Make sure the current layer is set to 0; then draw a circle with a 0.25″ diameter.
Add a line to the right of the circle that is 1″ long, as shown in Figure 30.16.
Enter ViewNumber in the Tag text box and View Number in the Prompt text box.
Select SheetSet in the Field Category drop-down list, and then select SheetSetPlaceholder from the Field Names list.
Select ViewNumber from the Placeholder Type list and Uppercase from the Format list (Figure 30.18).
You've just added the field that this block will need for the view number. Next, you need to make sure the text is formatted correctly.
Click OK to return to the Attribute Definition dialog box. Set the Justification value in the Text Settings group to Middle, and set the Text Height value to 0.15.
Turn on the Preset option in the Mode group. If you don't turn on the Preset option, you'll be prompted for the attribute value when the view is inserted even though the Sheet Set Manager supplies these values automatically.
Click OK. Then use the Center osnap to place the attribute definition in the center of the circle. VIEWNUMBER appears in large letters, centered on the circle.
If you forgot a setting in the previous steps, you can always go back and use the Properties palette to modify the attribute definition settings. Select the attribute definition, right-click, and choose Properties.
Next you need to add the view title and scale. The steps to add these parts of the view label are the same as for the view number you just added. You first create an attribute definition by using the Insert Field option for the attribute value. The only difference is the location and text options for the attribute definition. Here are the steps:
Click the Define Attributes tool in the Home tab's expanded Block panel to open the Attribute Definition dialog box again. Enter ViewTitle in the Tag text box and View Title in the Prompt text box.
Select ViewTitle from the Placeholder Type list and Title Case from the Format list.
Click OK. Then, in the Attribute Definition dialog box, set Justification to Left and Text Height to 0.15. Also make sure the Preset option in the Mode group is selected.
Click OK, and place the attribute definition approximately as shown in Figure 30.19.
Finally, you need to add the scale information to the view title:
Select ViewportScale from the Placeholder Type list, and select #″ = 1′-0″ from the Format list.
Click OK to exit the Field dialog box.
Set the Justification value in the Text Options group to Left, set the Text Height value to 0.1, and select the Preset option.
Click OK. Then place the View Scale attribute definition approximately as shown in Figure 30.19.
You have all the attribute definitions you'll need. The next task is to turn the whole thing into a block:
In the Block Definition dialog box, enter ViewTitle for the block name.
Click OK to finish the block. The block is now a part of your template file. All you need to do is save it to have the block available to the Sheet Set Manager.
If the ViewTitle block remains in the drawing, erase it. Then zoom out so you see the entire layout.
Click Save on the Quick Access toolbar to save the template file, which now includes your ViewTitle block.
You may notice that in step 5, the text in the block obscured the circle and line graphic. Fields always show a gray background to distinguish them from other types of text. The gray background doesn't print, so even though it appears to cover the line and circle, the fields won't interfere with the printing of those objects.
You must complete one more task to let the Sheet Set Manager know that your ViewTitle block is available. To do this, you need to open the Sheet Set Manager Preferences dialog box and point to the ViewTitle block. Here's how that's done:
Right-click My Existing Sheet Set in the sheet list and choose Properties.
In the Sheet Set Properties dialog box, click Label Block For Views in the Sheet Set group (Figure 30.20).
In the Select Block dialog box, click the Browse button to the far right of the Enter The Drawing File Name text box. In the Select Drawing dialog box, locate and select the
22 × 17 Arch.dwttemplate file you've been working with for this sheet set. Remember to choose AutoCAD Drawing Template (*.dwt) in the File Of Type drop-down list at the bottom of the Select Drawing dialog box.Back in the Select Block dialog box (Figure 30.21), click the Choose Blocks In The Drawing File radio button. Select ViewTitle from the list box just below the option. Click OK after you've made the selection, and then click OK in the Sheet Set Properties dialog box.
Remember that you created the ViewTitle block inside the 22 × 17 Arch.dwt template file, so when you saved that file, the block became a part of that template file. In steps 4 and 5, you selected the template file and then selected the block in that file. If you prefer, you can save your view title blocks as individual files. If you choose this route, make sure you select the Select The Drawing File As A Block option in step 4.
Now you're ready to test the block by adding a sheet and inserting a view. Remember that the Sheet Set Manager uses views to determine the contents of new viewports. Follow these steps:
Right-click My Existing Sheet Set in the sheet list, and choose New Sheet.
Enter 001 for the number and View Test for the sheet name, and click OK.
Double-click 001 View Test in the sheet list to open the file.
Click the Model Views tab of the Sheet Set Manager, expand the list for the
ProjectsChapter 30Sheet Set Sample 1Resourceslisting, and then expand theelevations.dwglisting.Right-click South Elevation in the list, and choose Place On Sheet.
Right-click the layout drawing area, and choose 1'8″ = 1′. Click in the layout to place the view. The view appears along with the view-title block you created in the beginning of this section.
You've seen how to create a custom view label block. The process for creating a callout block is basically the same.
You may recall that you were able to insert a callout block in a Plan view that was linked to an elevation drawing on another sheet. You can create a custom callout block by using the same steps you used to create the view title block in the preceding section. The only difference is that you select a different set of field values for the block's attribute definitions.
A callout block typically shows a circle with a view number on top and a sheet number on the bottom, as shown in Figure 30.22.
Figure 30.23 shows an exploded version of the callout block with the attribute definitions labeled with the appropriate field values. Those field values are found under the SheetSetPlaceholder field names in the Field dialog box.
In addition, you'll want to select the Associate Hyperlink option in the Field dialog box (Figure 30.24).
With this option selected, a hyperlink is created between the callout block and the view associated with it. This hyperlink will enable you to go directly to the sheet and the view being referenced by the callout block by Ctrl+clicking the field value in the callout block.
Just as with the view-title block, you can include the callout block inside the template file, or you can create individual files for each of your callout blocks. You can also have several callout blocks for different purposes.
For example, in the My Sample Sheet Set you created toward the beginning of this chapter, several callout blocks were available in the View List shortcut menu (Figure 30.25).
In that example, there was a callout block for the arrow directions. You can create a similar set of callout blocks for your drawings. You can also include callout blocks for details and finishes. You can even invent some uses on your own.
The callout block and view label feature will save you a lot of time when you're building your set of drawings, but you must go through a lot of steps when creating them. To help you get a better overall grasp of the process, here is a checklist of the general steps you need to take:
Create the graphics for the callout blocks.
Create the attribute definitions for the text in the callout blocks.
Assign the appropriate fields for the attribute definition values. For callout blocks and view titles, this is usually a SheetSetPlaceholder field.
Convert the graphics and attribute definitions into a block. Place the insertion point of view title blocks in the upper-left corner of the block to coincide with the location of the lower-left corner of the viewport with which it will be associated.
Use the Sheet Set Properties dialog box to indicate the file location of your callout and view title blocks. These can be blocks in a file or individual files.
Also remember to turn on the Associate Hyperlink option when selecting the fields for your callout blocks.
The sheet sets feature is a great way to keep your project files organized while you're creating your drawings. You can also use the Sheet Set Manager to turn your set into a package that can be easily sent to others who may need to work on the drawings or view them. And, you can use the Sheet Set Manager to create an archive of your set for safekeeping at the end of the project.
You may have noticed that the Sheet Set shortcut menu contains several options. Right-click the main title of your sheet set in the Sheet Set Manager's sheet list and you see the Archive, Publish, and eTransmit options:
The Archive option lets you collect your sheet set files into a Zip archive file.
The Publish option offers a convenient way to convert your set into a format that can be easily read by others who don't have AutoCAD.
The eTransmit option offers a way to transport your sheet set easily to others who may need to work on the set.
In the following sections, you'll take a closer look at these three sets of features for sharing your sheet set.
One of the more important housekeeping jobs you'll do is archiving completed projects. If you organize your projects by folders, you could archive the entire folder for a project, but in so doing, you might archive many files that weren't part of the set.
The sheet set Archive option lets you be more selective about the files you archive. You can exclude files in the sheet set or include other files that aren't necessarily AutoCAD drawings.
When you're ready to archive your sheet set, save all the files in your archive, and then open the Archive dialog box. To do this, right-click the name of your sheet set in the sheet list of the Sheet Set Manager and choose Archive from the shortcut menu to open the Archive A Sheet Set dialog box (Figure 30.26).
The Archive A Sheet Set dialog box has three tabs. The Sheets tab shows you the name of the sheets that will be archived. The check boxes by the sheet names indicate the sheets that will be archived. If you decide that you want to leave a sheet out of the archive, you can remove the check mark. The unchecked file and its associated Xref aren't archived.
The Files Tree tab offers a slightly different view of the archive. Instead of just showing you the sheet names, the Files Tree tab shows you the names of the files that will be archived. These include support files such as the sheet set data file and the template file associated with the sheet set.
The Files Table tab shows you even more detail about the files that will be archived, such as the path, the AutoCAD version, and similar information. It also includes information about the resource files that are Xrefs in the sheet files.
In both the Files Tree and Files Table tabs, the Add A File button enables you to include other files with the archive that aren't necessarily AutoCAD related but are part of the overall project. You can use this option to include Excel or Word documents that represent correspondence or worksheets.
By default, the sheet set Archive feature saves files in the Zip archive format (.zip filename extension). You can change the way the archives are saved as well as the location of the archive, the archive name, and several other settings through the Modify Archive Setup dialog box.
Click the Modify Archive Setup button in the Archive A Sheet Set dialog box to open the Modify Archive Setup dialog box (Figure 30.27).
Here you can make adjustments to the properties of the archive file, including the type of file to create and whether to preserve the file structure.
You can also view and save pertinent information about your archived sheet set by clicking the View Report button in the Archive A Sheet Set dialog box. Clicking this button opens the View Archive Report dialog box.
You can view the vital statistics regarding your sheet set archive. You also have the option to save the information in a file by clicking the Save As button. This opens a standard save file dialog box where you can assign a name and location for the information file. It's stored as a plain-text file with the .txt filename extension.
Another advantage of using sheet sets is that you can print all the sheets in a set at once and in the background. The Publish option in the Sheet Set shortcut menu enables you to turn the Sheet Set Manager into a batch-plot utility.
When you right-click the sheet set title in the sheet list of the Sheet Set Manager, you see the Publish option. Click Publish and another set of options appears (Figure 30.28), offering several plotting and publishing options.
The following list gives a rundown of these options. More detailed descriptions are offered in Chapters 8 and 29. See Appendix C for more on plot stamps.
- Publish To DWF
Publishes your sheet set to a DWF file. This option uses the Publish command's current default settings and the Sheet Set Publish Options. Before you use this option, make sure your settings are correct by using the Sheet Set Publish Options command in the Sheet Set shortcut menu.
- Publish To DWFx
Publishes your sheet set to a DWFx file. This file format is similar to the DWF format with the added ability that it can be viewed in Windows Vista without any special viewing program.
- Publish To Plotter
Sends your sheet set to a printer or plotter. This option uses the Publish command's current default settings and the Sheet Set Publish Options. Before you use this option, make sure your settings are correct by choosing Publish
- Publish Using Page Setup Override
Enables you to override the default layout settings in your sheets with a named page setup. See Chapter 8 for more on page setups. This can help to unify the plotter settings for all the sheets in your sheet set.
- Publish In Reverse Order
Sends the drawing sheets to the printer or plotter starting with the last sheet and adding subsequent sheets from back to front.
- Include Plot Stamp
Turns on the plot stamp feature in AutoCAD. A check mark appears next to this option when it is turned on. See Appendix C for more on plot stamps.
- Plot Stamp Settings
Opens the Plot Stamp dialog box. You can then make setting changes to your plot stamps. See Appendix C for more on plot stamps.
- Manage Page Setups
Lets you edit or create a page setup that you want to apply to your sheets as they're published. When you click this option, the Page Setup Manager dialog box opens, which is the same dialog box you see when you right-click a layout preview panel and choose Page Setup Manager. See Chapter 8 for more on page setups.
- Sheet Set Publish Options
Opens the Sheet Set Publish Options dialog box, which is essentially the same as the Publish Options dialog box described in Chapter 29. This dialog box lets you set the type of DWF file to create, the file location, and security options.
- Publish Dialog Box
Opens the Publish dialog box, and populates the Sheets To Publish list with the sheets in the sheet set. See Chapter 29 for more on the Publish dialog box.
In Chapter 29, you learned that you can use the eTransmit feature to package a set of AutoCAD files into a Zip file in order to send the files to someone else who may need to edit them. eTransmit is similar to the sheet set Archive feature, but it also makes sure all the supporting files, including fonts, font maps, and plotter configuration files, are included in the Zip file.
When you select eTransmit from the sheet set shortcut menu, the list of files to include in the eTransmit file is automatically populated with the files from the current sheet set. This means that you don't have to build the list of drawings manually for the eTransmit file.
If you need to make setting changes for the eTransmit feature, you can do so by selecting the Transmittal Setups option in the sheet set shortcut menu.
Now that you've seen how sheet sets work, you can start to use them on your own projects. Sheet sets work best when your project files are organized and you have some additional files prepared and on hand. Here's a checklist of things to keep in mind when you start to use sheet sets:
Organize your files so that when you import your project into a sheet set, the files will be automatically organized by discipline or sheet number.
Use only one layout per sheet set drawing file. The Sheet Set Manager uses only one drawing per sheet and one layout per drawing.
Create a template file containing the title block that you want to use for your project. Make sure to include any sheet set fields you want to use in the title block attribute definitions. You can also include your callout blocks in the template file for convenience.
Because all the sheets in your project will most likely be printed on the same size sheet with the same plot specifications, it helps to create a sheet setup that you can apply to all your sheets. You can store the sheet setup in any drawing file and then use the Sheet Set Properties option to locate that file to assign the page setup to the entire sheet set.
- Understand sheet sets
The Sheet Set feature is like a database that automatically keeps track of drawings and drawing resources for your projects. To use sheets sets successfully, you need to make sure the Sheet Set Manager is aware of all the drawings and resources used in a project.
- Master It
Name the two main categories of files that sheets sets use and that were mentioned at the beginning of this chapter.
- Create a sheet set from an existing project
If you have existing project files, you can set up a sheet set to work with them.
- Master It
Name the option on the first page of the Create Sheet Set Wizard that lets you set up a sheet set for an existing project.
- Manage title blocks and cross-references
When the Sheet Set Manager is aware of a drawing or drawing resource, you can automate the creation of sheets such as elevations and sections. You can also control the naming and numbering of drawings in a set through the Sheet Set Manager.
- Master It
What is the name of the right-click option that lets you change the name and number of a drawing?
- Customize sheet sets
To use sheets sets to their full potential, you should create title blocks and callout blocks that are sheet set aware so they can communicate with the Sheet Set Manager.
- Master It
What is the name of the object you must include in a block to store data?
- Archive, publish, and eTransmit sheet sets
As a project starts to grow, you'll have to keep track of sheet and reference drawings as well as other drawing resources. Because the Sheet Set Manager is already aware of all the files needed for a project, you can use it to help keep track of project files.
- Master It
Name the three AutoCAD features that help you manage your files.