References

Adams, G. F., 1957, Block diagrams from perspective grids: Journal of Geoscience Education, v. 5, no. 2, p. 10–19.

Allan, U. S., 1980, A model for the migration and entrapment of hydrocarbons (abs.): AAPG Research Conference on Seals for Hydrocarbons, Unpublished Abstracts, 16 p.

______, 1989, Model for hydrocarbon migration and entrapment within faulted structures: American Association of Petroleum Geologists Bulletin, v. 73, p. 803–811.

Allaud, L., 1976, Vertical net sandstone determination for isopach mapping of hydrocarbon reservoirs: American Association of Petroleum Geologists Bulletin, v. 60, p. 2150–2153.

Allen, C. R., 1962, Circum-Pacific faulting in the Philippines-Taiwan region: Journal of Geophysical Research, v. 67, p. 4795–4812.

Amer, A., F. Chinellato, S. Collins, J.-M. Denichou, I. Dubourg, R. Griffiths, R. Koepsell, S. Lyngra, P. Marza, D. Murray, and I. Roberts, 2013, Structural steering—A path to productivity: Oilfield Review, v. 25, no. 1, p. 14–31.

Anderson, A., 1929, Underground surveys of oil wells, SPE-929030-G: Transactions of the AIME, v. 82, no. 1, 11 p.

Anspach, D. H., S. E. Tripp, R. E. Berlitz, and J. A. Gilreath, 1987, Postdevelopment analysis of producing shelf-slope environments of deposition, High Island area: Transactions Gulf Coast Association of Geological Societies, v. 37, p. 1–10.

Anstey, N. A., 1977, Seismic Interpretation: The Physical Aspects: Boston, International Human Resources Development Corporation Press, 637 p.

______, 1982, Simple Seismics for the Petroleum Geologist, the Reservoir Engineer, the Well-Log Analyst, the Processing Technician, and the Man in the Field: Boston, International Human Resources Development Corporation Press, 168 p.

Applegate, J. K., and Rose, P. R., 1985, Structure of the Raton basin from a regional seismic line, in Gries, R. R., and R. C. Dyer, eds., Seismic Exploration of the Rocky Mountain Region: Denver, CO, Rocky Mountain Association of Geologists and Denver Geophysical Society, p. 259–265.

Archie, G. E., 1942, The electrical resistivity log as an aid in determining some reservoir characteristics: Transactions American Institute of Metallurgical Engineers, v. 146, p. 54–62.

______, 1947, Electrical resistivity an aid in core-analysis interpretation: American Association of Petroleum Geologists Bulletin, v. 31, p. 350–366.

Atwater, G. I., and E. E. Miller, 1965, The effect of decrease in porosity with depth on future development of oil and gas reserves in South Louisiana (Abs.): American Association of Petroleum Geologists Bulletin, v. 49, p. 334.

Atwater, G. I., and M. J. Foreman, 1959, Nature of growth of southern Louisiana salt domes and its effect on petroleum accumulation: American Association of Petroleum Geologists Bulletin, v. 43, p. 2592–2622.

Aydin, A., and A. Nur, 1982, Evolution of pull-apart basins and their scale independence: Tectonics, v. 1, p. 91–105.

______, 1985, The type and role of stepovers in strike-slip tectonics, in Biddle, K. T., and N. Christie-Blick, eds., Strike-Slip Deformation, Basin Formation, and Sedimentation: Society of Economic Paleontologists and Mineralogists, Special Publication No. 37, p. 35–44.

Badgley, P. C., 1959, Structural Methods for the Exploration Geologist and a Series of Problems for Structural Geology Students: New York, Harper & Bros., 280 p.

Badley, M. E., 1985, Practical Seismic Interpretation: Boston, International Human Resources Development Corporation Press, 266 p.

Baldwin, B., and C. O. Butler, 1985, Compaction curves: American Association of Petroleum Geologists Bulletin, v. 69, p. 622–626.

Ball, S. M., 1982, Exploration application of temperatures recorded on log-headings—An up-the-odds method of hydrocarbon-charged porosity prediction: American Association of Petroleum Geologists Bulletin, v. 66, p. 1108–1123.

Bally, A. W., 1983, Seismic Expression of Structural Styles: American Association of Petroleum Geologists Bulletin, Studies in Geology Series No. 15, v. 3., p. 167–172.

Bally, A. W., P. L. Gordy, and G. A. Stewart, 1966, Structure, seismic data, and orogenic evolution of southern Canadian Rocky Mountains: Canadian Society of Petroleum Geologists Bulletin, v. 14, p. 337–381.

Banks, C. J., and J. Wharburton, 1986, “Passive-roof” duplex geometry in the frontal structures of the Kirthar and Sulaiman Mountain Belts, Pakistan: Journal of Structural Geology, v. 8, p. 229–237.

Barker, T. B., and C. E. Guzman, 1992, Defining the salt with walkaway VSPs and salt proximity survey, Auger field, Gulf of Mexico: Expanded Abstracts 62nd Annual International Meeting, Society of Exploration Geophysicists, 25–29 October, New Orleans, p. 284–287.

Barnes, M., 2005, High resolution satellite imagery applied to oil and gas projects: SEG 2005 Annual Meeting, 6–11 November, Houston, Texas.

Barnett, J. A. M., J. Mortimer, J. H. Rippon, J. J. Walsh, and J. Waterson, 1987, Displacement geometry in the volume containing a single normal fault: American Association of Petroleum Geologists Bulletin, v. 71, p. 925–937.

Bartel, D. E., M. Busby, J. Nealon, and J. Zaske, 2006, Time to depth conversion and uncertainty assessment using average velocity modeling: SEG Annual Meeting, 1–6 October, New Orleans, Louisiana.

Beckwith, R. H., 1941, Trace-slip faults: American Association of Petroleum Geologists Bulletin, v. 25, no. 12, p. 2181–2193.

______, 1947, Fault problems in fault planes: Geological Society of America Bulletin, v. 58, p. 79–108.

Bell, W. G., 1956, Tectonic setting of Happy Springs and nearby structures in the Sweetwater Uplift area, central Wyoming, in Geological Record of the American Association of Petroleum Geologists, Rocky Mountain Section.

Benesh, N. P., A. Plesch, and J. Shaw, 2014, Geometry, kinematics, and displacement characteristics: An example from the deep-water Niger Delta: American Association of Petroleum Geologists Bulletin, v. 98, p. 465–482.

Bengston, C. A., 1980, Statistical curvature analysis methods for interpretation of dipmeter data: Oil and Gas Journal, June 23 issue, p. 172–190.

Bennison, G. M., 1975, An Introduction to Geological Structures and Maps, third ed.: London, Edward Arnold Ltd., 144 p.

Berg, O. R., and D. G. Woolverton, 1985, Seismic Stratigraphy II—An Integrated Approach to Hydrocarbon Exploration: American Association of Petroleum Geologists Memoir 39, 276 p.

Berg, R. R., 1967, Point bar origin of Fall River sandstone reservoirs, northeastern Wyoming: Society of Petroleum Engineers, Paper 1953, 6 p.

Bergen, J. B., and J. H. Shaw, 2010, Displacement profiles and displacement-length scaling relationships of thrust faults constrained by seismic-reflection data, Geological Society of America Bulletin, v. 122, p. 1209–1219.

Billings, M. P., 1954, Structural Geology, second ed.: New York, Pearson, 514 p.

______, 1972, Structural Geology, third ed.: Englewood Cliffs, NJ, Pearson, 606 p.

Biot, M. A., 1961, Theory of folding of stratified viscoelastic media and its implication in tectonics and orogenesis: Geological Society of America Bulletin, v. 72, p. 1595–1620.

Bischke, R. E., 1974, A model of convergent plate margins based on the Recent tectonics of Shikoku, Japan: Journal of Geophysical Research, v. 79, p. 4845–4857.

______, 1990, Applied Structural Balancing: Gulf Coast Association of Geological Societies Short Course, 40th Annual Convention, Lafayette, LA.

______, 1994a, The compressional off-structure problem: Houston Geological Society Bulletin, May issue, p. 29–34.

______, 1994b, Interpreting sedimentary growth structures from well log and seismic data (with examples): American Association of Petroleum Geologists Bulletin, v. 7, p. 873–892.

Bischke, R. E., and D. J. Tearpock, 1993, A method for estimating gross sand percentage and reservoir thickness from seismic section: Example from Segno Field, Polk Co., Texas: Houston Geological Society Bulletin, May issue, p. 22–23, 40–43.

Bischke, R. E., and D. J. Tearpock, 1999, A graphical dip domain technique for projecting large growth faults to depth using imaged hanging wall structure: Transactions Gulf Coast Association of Geological Societies, v. 49, p. 112–120.

Bischke, R. E., and J. Suppe, 1990a, Calculating sand/shale ratios from growth normal fault dips on seismic profiles: Transactions Gulf Coast Association of Geological Societies, v. 40, p. 39–49.

______, 1990b, Geometry of rollover: Origin of complex arrays of antithetic and synthetic crestal faults (Abs.): American Association of Petroleum Geologists Bulletin, v. 74, p. 611.

Bischke, R. E., J. B. Brewton, and D. J. Tearpock, 2006, A robust technique for resolving faulting problems on the steeply dipping flanks of salt domes using the multiple Bischke plot analysis: Gulf of Mexico Association of Geological Societies, v. 55, p. 5–22.

Bischke, R. E., J. Suppe, and R. del Pilar, 1990, A new branch of the Philippine Fault system, as observed from aeromagnetic and seismic data: Tectonophysics, v. 183, p. 243–264.

Bischke, R. E., W. Finley, and D. J. Tearpock, 1999, Growth analysis (∆d/d): Case histories of the resolution of correlation problems as encountered while mapping around salt: Transactions Gulf Coast Association of Geological Societies, v. 49, p. 102–110.

Bishop, M. S., 1960, Subsurface Mapping: New York, John Wiley & Sons, 198 p.

Blake, G. H., 1991, Review of the Neogene biostratigraphy of the Los Angeles Basin and implications for basin evolution, in Biddle, K. T., ed., Active Margin Basins: American Association of Petroleum Geologists Memoir 52, p. 135–184.

Blomquist, P. K., 2016, Wolfcamp Horizontal Play, Midland Basin, West Texas: Search and Discovery Article #10890, p. 1–34.

Bloomer, R. R., 1977, Depositional environments of a reservoir sandstone in west-central Texas: American Association of Petroleum Geologists Bulletin, v. 61, no. 3, p. 344–359.

Bolt, H., 2015, Wireline Depth Determination, Rev. 4.0, 110 p.

______, 2016, Wireline logging depth quality improvement: Methodology review and elastic-stretch correction: Petrophysics, v. 57, no. 3, p. 294–310.

Bond, D. C., 1972. Hydrodynamics in deep aquifers of the Illinois Basin, Circular 470, Illinois State Geological Survey, 72 p.

Boos, C. M., and M. F. Boos, 1957, Tectonics of eastern flank and foothills of Front Range, Colorado: American Association of Petroleum Geologists Bulletin, v. 41, no. 12, p. 2603–2676

Bott, W. F., Jr., and T. T. Tieh, 1987, Diagenesis and high fluid pressures in the Frio and Vicksburg shales, Brooks County, Texas: Transactions Gulf Coast Association of Geological Societies, v. 37, p. 323–334.

Bouvier, J. D., C. H. Kaars-Sijpesteijn, D. F. Kleusner, C. C. Onyejekwe, and R. C. Van der Pal, 1989, Three-dimensional seismic interpretation and fault sealing investigations, Nun River Field, Nigeria: American Association of Petroleum Geologists Bulletin, v. 73, p. 1397–1414.

Bower, T. H., 1947, Log map, new type of subsurface map: American Association of Petroleum Geologists Bulletin, v. 127, no. 7, p. 340–349.

Boyer, S. E., 1986, Styles of folding within thrust sheets: Examples from Appalachian and Rocky Mountains of the U.S.A. and Canada: Journal of Structural Geology, v. 8, p. 325–339.

Boyer, S. E., and D. Elliott 1982, Thrust systems: American Association of Petroleum Geologists Bulletin, v. 66, no. 9, p. 1196–1230.

Brabb, E. E., 1989, Geologic map of Santa Cruz County, California: U.S. Geological Survey Miscellaneous Investigations Series Map I-1905, scale 1:62,500.

Branson, R. B., 1991, Productive trends and production history, South Louisiana and adjacent offshore, in Goldthwaite, D., ed., An Introduction to Central Gulf Coast Geology: New Orleans Geological Society, p. 61–70.

Brenneke, J. C., 1995, Analysis of fault traps: World Oil, December issue, p. 63–71.

Breyer, J. A., ed., 2016, The Eagle Ford Shale: A renaissance in U.S. oil production: American Association of Petroleum Geologists Memoir 110, 389 p.

Bristol, H. M., 1975, Structural geology and oil production of northern Gallatin County and southernmost White County, Illinois: Illinois State Geological Survey, Illinois Petroleum 105, 20 p.

Bristol, H. M., and J. D. Treworgy, 1979, The Wabash Valley fault system in southeastern Illinois: Illinois State Geological Survey, Circular 509, 19 p.

Brooks, A., H. Wilson, A. Jamieson, D. McRobbie, and S. G. Holehouse, 2005, Quantification of depth accuracy, SPE 95611, 2005 SPE Annual Technical Conference and Exhibition, 9–12 October, Dallas, Texas, 5 p.

Broussard, M. J., and B. E. Lock, 1995, Modern analytical techniques for fault surface seal analysis: A Gulf Coast case history: Transactions Gulf Coast Association of Geological Societies, v. 45, p. 87–93.

Brown, A. R., 1999, Interpretation of Three-Dimensional Seismic Data, fifth ed.: American Association of Petroleum Geologists Memoir 42, 510 p.

______, 2011, Interpretation of Three-Dimensional Seismic Data, seventh ed.: American Association of Petroleum Geologists Memoir 42, 648 p.

Brown, Alton, 2003, Improved interpretation of wireline pressure data, American Association of Petroleum Geologists Bulletin, v. 87, p. 295–311.

Brown, G. G., D. L. Katz, R. C. Alden, and Natural Gas Processors Association, 1948, Natural Gasoline and Volatile Hydrocarbons: Tulsa, OK, National Gasoline Association of America.

Brown, L. F., and W. L. Fisher, 1984, Stratigraphic Interpretation and Petroleum Exploration: American Association of Petroleum Geologists Bulletin, Continuing Education Course Note Series No. 16.

Brown, R. L., 1981, Thickness Corrections for Deviated Wells—A Simplified Technique Utilizing the Apparent Dip along a Well Path: Contribution to the 1981 Geological/Petrophysical Conference, Houston, TX.

Brown, R. N., 1980, History of exploration and discovery of Morgan, Ramadan and July Oil Fields, Gulf of Suez, Egypt, in Miall, A. D., ed., Facts and Principles of World Petroleum Occurrence: Canadian Society of Petroleum Geologists Memoir 6, p. 733–764.

Brown, W. G., 1982, New Tricks for Old Dogs—A Short Course in Structural Geology: American Association of Petroleum Geologists, Southwest Section Meeting, Wichita Falls, TX, 79 p.

______, 1984a, Working with Folds: American Association of Petroleum Geologists, Structural Geology School Course Notes.

______, 1984b, Basement Involved Tectonics, Foreland Areas: American Association of Petroleum Geologists, Continuing Education Course Series No. 26, 92 p.

Bruce, C. H., 1973, Pressured shale and related sediment deformation: Mechanism for development of regional contemporaneous faults: American Association of Petroleum Geologists Bulletin, v. 57, p. 878–886.

Brune, J. N., T. L. Henyey, and R. F. Roy, 1969, Heat flow, stress and rate of slip on the San Andreas Fault, California: Journal of Geophysical Research, v. 74, p. 3821–3827.

Bucher, W. H., 1933, The Deformation of the Earth’s Crust: Princeton, NJ, Hafner Publishing Company, 518 p.

Busch, D. A., 1959, Prospecting for stratigraphic traps: American Association of Petroleum Geologists Bulletin, v. 43, no. 12, p. 2829–2843.

______, 1974, Stratigraphic Traps in Sandstones—Exploration Techniques: American Association of Petroleum Geologists Memoir 21, 174 p.

Busch, D. A., and D. A. Link, 1985, Exploration Methods for Sandstone Reservoirs: Tulsa, OK, Oil and Gas Consultants, Inc., 327 p.

Busk, H. G., 1929, Earth Flexures, Their Geometry and Their Representation and Analysis in Geological Section, with Special Reference to the Problem of Oil Finding: Cambridge, Cambridge University Press, 106 p.

______, 1957, Earth Flexures, Their Geometry and Their Representation and Analysis in Geological Section, with Special Reference to the Problem of Oil Finding: New York, William Trussell, 106 p.

Cape, D. C., S. McGeary, and G. A. Thompson, 1983, Cenozoic normal faulting and the shallow structure of the Rio Grande Rift near Socorro, New Mexico: Geological Society of America Bulletin, v. 94, p. 3–14.

Cartwright, J. A., R. Bouroullec, D. James, and H. D. Johnson, 1998, Polycyclic motion history of some Gulf Coast growth faults from high-resolution displacement analysis, Geology, v. 26, no. 9, p. 819–822.

Castelltort, S., S. Pochat, and J. Van den Driessche, 2004, Using T–Z plots as a graphical method to infer lithological variations from growth strata, Journal of Structural Geology, v. 26, p. 1425–1432.

Challinor, J., 1933, The “throw” of a fault: Geological Magazine, v. 70, p. 384–393.

Chamberlin, R. T., 1910, The Appalachian folds of central Pennsylvania: Journal of Geology, v. 18, p. 228–251.

Chamberlin, T. C., 1897, The method of multiple working hypothesis: Journal of Geology, v. 5, p. 837–848.

Chatellier, J-Y., and C. Porras, 2001, The Multiple Bischke Plot Analysis, a simple and powerful graphic tool to integrate stratigraphic studies: American Association of Petroleum Geologists, Annual Convention Program Book, p. A34–A35.

______, 2004, The Multiple Bischke Plot Analysis: A Simple and Powerful Graphic Tool for Integrated Stratigraphic Studies: Search and Discovery Article #40110.

Chatellier, J-Y., and S. Olave-Hoces, 2009, Successful Exploration in a Thrust Belt, Lessons Learned from the Giant Fields of Eastern Venezuela (the Furrial Trend): Search and Discovery Article #10202.

Chatellier, J-Y., and M. Rueda, 2010, Challenging the Paradigm “Missing Section-Normal Fault”—Implications for Hydrocarbon Exploration, Search and Discovery Article #40550.

Chen, A., 2014, The practice of graphical fluid-gradient interpretations of formation tester pressure data, American Association of Petroleum Geologists Bulletin, v. 98, p. 1431–1448.

Chenoweth, P. A., 1972, Unconformity traps, in King, R. E., ed., Stratigraphic Oil and Gas Fields—Classification, Exploration Methods, and Case Histories: American Association of Petroleum Geologists Memoir 16, p. 42–46.

Chia, C. R., H. Laastad, A. Kostin, F. Hjortland, and G. Bordakov, 2006, A new method for improving LWD logging depth, SPE 102175, SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 24–27 September, 9 p.

Chilingarian, G. V., and P. Vorabutr, 1981, Drilling and Drilling Fluids, Developments in Petroleum Science, book 11, New York, Elsevier, 767 p.

Chinnery, M. A., 1963, The stress changes that accompany strike-slip faulting: Bulletin of the Seismological Society of America, v. 53, p. 921–932.

Chopra, S., D. Lubo-Robles, and K. J. Marfurt, 2018, Some Machine Learning Applications in Seismic Interpretation: Search and Discovery Article #42270, p. 1–7.

Christensen, A. F., 1983, An example of a major syndepositional listric fault, in Bally, A. W., ed., Seismic Expression of Structural Styles: American Association of Petroleum Geologists Bulletin, Studies in Geology No. 15, v. 2, p. 2.3.1–36 to 2.3.1–40.

Christie-Blick, N., and K. T. Biddle, 1985. Deformation and basin formation along strike-slip faults: Strike-Slip Deformation, Basin Formation, and Sedimentation, Society for Sedimentary Geology, Special publication, v. 37, 1–34.

Clark, J. C., 1959, Problems of fault nomenclature: American Association of Petroleum Geologists Bulletin, v. 43, no. 11, p. 2653–2674.

Clark, J. C., and J. D. Reitman, 1973, Oligocene stratigraphy, tectonics, and paleogeography southwest of the San Andreas Fault, Santa Cruz Mountains and Gabilan Range, California Coastal Ranges: United States Geological Survey, Professional Paper 783, 18 p.

Clark, M. M., K. K. Lienkaemper, J. J. Harwood, D. S. Lajoie, K. R. Matti, J. C. Perkins, J. A. Rymer, A. M. Sarna-Wojcicki, A. M. Sharp, J. D. Sims, J. C. Tinsley, and J. I. Ziony, 1984, Preliminary slip-rate table and map of late-Quaternary faults of California: United States Geological Survey Open-File Report 84–106, 12 p.

Clark, S. K., 1943, Classification of faults: American Association of Petroleum Geologists Bulletin, v. 27, p. 1245–1265.

Clemons, K., H. Bello, R. Bodziak, M. McChesney, R. Meek, and A. Stephens, 2016, Seismic attributes: Exploiting seismic data to understand heterogeneous reservoir performance in the Eagle Ford Shale, south Texas, U.S.A., in J. A. Breyer, ed., The Eagle Ford Shale: A renaissance in U.S. oil production: American Association of Petroleum Geologists Memoir 110, p. 241–258.

Cloos, E., 1942, Distortion of stratigraphic thickness due to folding: Proceedings of the National Academy of Science, v. 28, no. 10, p. 401–407.

______, 1968, Experimental analysis of Gulf Coast fracture patterns: American Association of Petroleum Geologists Bulletin, v. 52, p. 420–444.

Coates, J., 1945, The construction of geological sections: Quarterly Journal, Geological Mining and Metallurgical Society of India, v. 17, p. 1–11.

Cole, W., 1969, Reservoir Engineering Manual, second ed.: Houston, Gulf Publishing Company, 385 p.

Coleman, J. M., 1982, Deltas: Processes of Deposition and Models for Exploration: Boston, International Human Resources Development Corporation, 124 p.

______, 1988, Dynamic changes and processes in the Mississippi River Delta: Geological Society of America Bulletin, v. 100, p. 999–1015.

Corredor F., J. H. Shaw, and F. Bilotti, 2005, Structural styles in the deep-water fold and thrust belts of the Niger Delta, American Association of Petroleum Geologists Bulletin, v. 89, p. 753–780.

Corredor, F., J. H. Shaw, and J. Suppe, 2005, Shear fault-bend fold, deep water Niger Delta, in Shaw, J., C. Connors, and J. Suppe, eds., Seismic Interpretation of Contractional Fault-Related Folds, American Association of Petroleum Geologists, p. 87–92.

Craft, B. C., and M. F. Hawkins, 1959, Applied Petroleum Reservoir Engineering: Englewood Cliffs, NJ, Pearson, 437 p.

Crans, W., G. Mandl, and J. Haremboure, 1980, On the theory of growth faulting: A geomechanical delta model based on gravity sliding: Journal of Petroleum Geology, v. 2, p. 265–307.

Cribbs, B., 2009, Practical Wellbore Formation Test Interpretation: Search and Discovery Article #120009, 20 p.

Crowell, J. C., 1948, Template for spacing structure contours: American Association of Petroleum Geologists Bulletin, v. 32, p. 2290–2294.

______, 1950, Geology of Hungry Valley area, southern California: American Association of Petroleum Geologists Bulletin, v. 34, p. 1623–1646.

______, 1959, Problems in fault nomenclature: American Association of Petroleum Geologists Bulletin, v. 43, p. 2653–2674.

______, 1962, Displacement along the San Andreas fault, California: Geological Society of America Special Paper 71, 61 p.

______, 1974a, Origin of late Cenozoic basins in southern California, in Dickinson, W. R., ed., Tectonics and Sedimentation: Society of Economic Paleontologists and Mineralogists, Special Publication No. 22, p. 190–204.

______, 1974b, Sedimentation along the San Andreas Fault, California, in Dott, R. H., Jr., and R. H. Shaver, eds., Modern and Ancient Geosynclinal Sedimentation: Society of Economic Paleontologists and Mineralogists, Special Publication No. 19, p. 292–303.

______, 1982, The tectonics of Ridge Basin, Southern California, in Crowell, J. C., and M. Link, eds., Geologic History of Ridge Basin, Southern California: Pacific Section, Society of Economic Paleontologists and Mineralogists, p. 25–42.

______, 2003a, Introduction to geology of Ridge Basin, southern California, in Crowell, J. C., ed., Evolution of Ridge Basin, Southern California: An Interplay of Sedimentation and Tectonics, Special Paper 37: Geological Society of America, p. 1–16.

______, 2003b, Overview of rocks bordering Ridge Basin, southern California, in Crowell, J. C., ed., Evolution of Ridge Basin, Southern California: An Interplay of Sedimentation and Tectonics, Special Paper 37: Geological Society of America, p. 89–112.

______, 2003c, Tectonics of Ridge Basin, southern California, in Crowell, J. C., ed., Evolution of Ridge Basin, Southern California: An Interplay of Sedimentation and Tectonics, Special Paper 37: Geological Society of America, p. 157–204.

Crowell, J. C., and M. H. Link, eds., 1982, Geologic History of Ridge Basin, Southern California: Los Angeles, CA, Pacific Section, Society of Economic Paleontologists and Mineralogists, 304 p.

Cunningham, W. D., and P. Mann, 2007, Tectonics of strike-slip restraining and releasing bends, Geological Society, London, Special Publications, 290, 482 p.

Currie, J. B., 1952, Three-dimensional method for solution of oil field structures: American Association of Petroleum Geologists Bulletin, v. 36, p. 889–890.

______, 1956, Role of concurrent deposition and deformation of sediments in development of salt-dome graben structures: American Association of Petroleum Geologists Bulletin, v. 40, p. 1–16.

Dahlen, F. A., and J. Suppe, 1988, Mechanics, growth, and erosion of mountain belts: Geological Society of America, Special Paper 218, p. 161–178.

Dahlen, F. A., J. Suppe, and D. Davis, 1984, Mechanics of fold-and-thrust belts and accretionary wedges: Cohesive Coulomb theory: Journal of Geophysical Research, v. 89, p. 10,087–10,101.

Dahlstrom, C. D. A., 1969, Balanced cross-sections: Canadian Journal of Earth Sciences, v. 6, p. 743–757.

______, 1970, Structural geology in the eastern margin of the Canadian Rocky Mountains: Bulletin of Canadian Petroleum Geology, v. 18, p. 332–406.

Dart, R. L., and H. S. Swolfs, 1992, Subparallel faults and horizontal-stress orientations: An evaluation of in-situ stresses inferred from elliptical wellbore enlargements, in Larsen, R. M., H. Brekke, and B. T. Larson, eds., Structural and Tectonic Modeling and Its Applications to Petroleum Geology: Norwegian Petroleum Society, Special Publication No. 1, p. 519–529.

Davis, D., and T. Engelder, 1985, The role of salt in fold-and-thrust belts: Tectonophysics, v. 119, p. 67–88.

Davis, D., J. Suppe, and F. A. Dahlen, 1983, Mechanics of fold-and-thrust belts and accretionary wedges: Journal of Geophysical Research, v. 88, p. 1153–1172.

Davis K., M. H. Burbank, D. Fisher, S. Wallace, and D. Nobes, 2005, Thrust fault growth and segment linkage in the active Ostler fault zone, New Zealand, Journal of Structural Geology, v. 27, p. 1528–1546.

Davis, T. L., 1987, Seismic facies analysis: pitfalls and applications in cratonic basins: The Leading Edge, v. 6, p. 18–23, 37.

Davison, I., 1986, Listric normal fault profiles: Calculation using bed-length balance and fault displacement: Journal of Structural Geology, v. 8, no. 2, p. 209–210.

______, 1987, Normal fault geometry related to sediment compaction and burial: Journal of Structural Geology, v. 9, p. 393–401.

Dawers, N. H., and J. R. Underhill, 2000, The role of fault interaction and linkage in controlling synrift stratigraphic sequences: Late Jurassic, Statfjord East Area, North Sea: American Association of Petroleum Geologists Bulletin, v. 84, p. 45–64.

De Paor, D. G., and G. Eisenstadt, 1987, Stratigraphy and structural consequences of fault reversal: An example from the Franklinian Basin, Ellesmere Island: Geology, v. 15, p. 948–949.

Dennis, H., J. Baillie, T. Holt, and D. Wessel-Berg, 2000, Hydrodynamic activity and tilted oil-water contacts in the North Sea, in Ofstad, K., J. E. Kittilsen, and P. Alexander-Marrack, eds., Improving the Exploration Process by Learning from the Past, Norwegian Petroleum Society Special Publication 9, Amsterdam, Elsevier, p. 171–185.

Dennis, J. G., 1972, Structural Geology: New York, Ronald Press, 532 p.

Dennison, J. M., 1968, Analysis of Geologic Structures: New York, W. W. Norton & Co., 209 p.

Dickey, P. A., 1981, Petroleum Development Geology, second ed.: Tulsa, OK, PennWell Publishing Co., 428 p.

______, 1986, Petroleum Development Geology, third ed.: Tulsa, OK, PennWell Publishing Co., 530 p.

Dickinson, G., 1954, Subsurface interpretation of intersecting faults and their effects upon stratigraphic horizons: American Association of Petroleum Geologists Bulletin, v. 38, no. 5, p. 854–877.

Dickinson, W. R., and D. R. Seely, 1979, Structure and stratigraphy of forearc regions: American Association of Petroleum Geologists Bulletin, v. 63, p. 2–31.

Diegel, F. A., J. F. Karlo, D. C. Schuster, R. C. Shoup, and P. R. Tauvers, 1995, Cenozoic structural evolution and tectono-stratigraphic framework of the northern Gulf Coast continental margin, in Jackson, M. P. A., D. G. Roberts, and S. Snelson, eds., Salt Tectonics: A Global Perspective: American Association of Petroleum Geologists Memoir 65, p. 109–151.

Dischinger, J. D., and S. Mitra, 2006, Three-dimensional structural model of Painter and East Painter reservoir structures, Wyoming Fold and Thrust Belt: American Association of Petroleum Geologists Bulletin, v. 90, no. 8, p. 1171–1185.

Dixon, J. M., 1975, Finite strain and progressive deformation in models of diapiric structures: Tectonophysics, v. 28, p. 89–124.

Dobrovolny, J. S., 1951, Descriptive geometry for geologists: American Association of Petroleum Geologists Bulletin, v. 35, p. 1674–1686.

Doebl, F., and R. Teichmuller, 1979, Zur Geologie und heutigen Geothermik mittleren Oberrhein-Graben: Fortschritte in der Geologie von Rheinland und Westfalen, v. 27, p. 1–17.

Dolly, E. D., 1979, Geological techniques utilized in Trap Spring Field discovery, Railroad Valley, Nye County, Nevada, in Newman, G. W., and H. D. Goode, eds., Basin and Range Symposium and Great Basin Field Conference: Denver, CO, Rocky Mountain Association of Geologists and Utah Geological Association, p. 455–467.

Donath, F. A., and R. B. Parker, 1964, Folds and folding: Geological Society of America Bulletin, v. 75, p. 45–62.

Donn, W. L., and J. A. Shimer, 1958, Graphic Methods in Structural Geology, New York, Appleton- Century-Crofts, 180 p.

Doveton, J. H., 1986, Log Analysis of Subsurface Geology: New York, John Wiley & Sons, 273 p.

Downey, M. W., 1984, Evaluating seals for hydrocarbon accumulation: American Association of Petroleum Geologists Bulletin, v. 68, p. 1752–1763.

Dula, W. F., Jr., 1991, Geometric models of listric normal faults and rollover folds: American Association of Petroleum Geologists Bulletin, v. 75, p. 1609–1625.

Duran, L. G., 1951, Trigonometric and graphical solution of problems in structural mapping: World Oil, v. 133, no. 6, p. 94–98.

Durand-Riard, P., Shaw, J., Plesch, A., and Lufadeju, G., 2013, Enabling 3D geomechanical restoration of strike- and oblique-slip faults using geological constraints, with applications to the deep-water Niger Delta: Journal of Structural Geology, v. 48, p. 33–44.

Dury, G. H., 1952, Map Interpretation: London, Pittman, 203 p.

Eardley, A. J., 1938, Graphic treatment of folds in three dimensions: American Association of Petroleum Geologists Bulletin, v. 22, p. 483–489.

Eastman Christensen, n.d., Magnetic Single-Shot Operations Manual: Salt Lake City, UT, Eastman Christensen, 38 p.

Eastman Whipstock, n.d., Introduction to Directional Drilling: Houston, TX, Eastman Whipstock, 38 p.

Ebanks, W. J., Jr., and J. F. Weber, 1982, Development of a shallow heavy-oil deposit in Missouri: Oil and Gas Journal, September 27 issue, p. 222–234.

Echavarria, L., R. Hernandez, R. Allmendinger, and J. Reynolds, 2003, Subandean thrust and fold belt of northwestern Argentina: Geometry and timing of the Andean evolution, AAPG Bulletin, v. 87, p. 965–985.

Edwards, M. B., 2001, Wilcox Regional Study—South Texas Zapata Phase: Unpublished multiclient report.

Ehlert, K. W., 2003, Tectonic significance of the middle Miocene Mint Canyon and Caliente Formations, southern California: in Crowell, J. C., ed., Evolution of Ridge Basin, Southern California: An Interplay of Sedimentation and Tectonics, Special Paper 367, p. 113–130.

Eichelberger, N. W., A. G. Nunns, R. H. Groshong Jr., and A. N. Hughe, Direct estimation of fault trajectory from structural relief: American Association of Petroleum Geologists Bulletin, v. 101, p. 635–653.

Elliott, D., 1976, The energy balance and deformation mechanisms of thrust sheets: Philosophical Transactions of the Royal Society of London, Series A, v. 283, p. 289–312.

______, 1983, The construction of balanced cross sections: Journal of Structural Geology, v. 5, p. 101.

Emery, K. O., 1980, Continental margins—Classification of petroleum prospects: American Association of Petroleum Geologists Bulletin, v. 64, p. 297–315.

Engelder, T., and R. Engelder, 1977, Fossil distortion and decollement tectonics of the Appalachian Plateau: Geology, v. 5, p. 457–460.

Ewing, T. E., 1983, Growth faults and salt tectonics in the Houston Diapir Province—Relative timing and exploration significance: Transactions Gulf Coast Association of Geological Societies, v. 33, p. 83–90.

Fagin, R. A., J. E. Trusty, L. R. Emmet, and M. K. Mayo, 1991, MWD resistivity tool guides bit horizontally in thin bed: Oil & Gas Journal, December 9 issue, p. 62–65.

Faill, R. T., 1969, Kink band structure in the Valley and Ridge Province, central Pennsylvania: Geological Society of America Bulletin, v. 80, p. 2539–2550.

______, 1973, Kink band folding, Valley and Ridge Province, Pennsylvania: Geological Society of America Bulletin, v. 84, p. 1289–1314.

Fallaw, W. C., 1973, Grabens on anticlines in Gulf Coastal Plain, and thinning of sedimentary section in downthrown block: American Association of Petroleum Geologists Bulletin, v. 57, p. 198–203.

FEMA (Federal Emergency Management Agency), 2014, Vertical Datum Conversion, Guidance Document 24, 11 pages.

Ferrill, D. A., A. P. Morris, and R. N. McGinnis, 2009, Crossing normal conjugate faults in field exposures and seismic data, American Association of Petroleum Geologists Bulletin, v. 93, no. 11, pp. 1471–1488.

Ferrill, D. A., A. P. Morris, J. A. Stamatakos, and D. W. Sims, 2000, Crossing conjugate normal faults, American Association of Petroleum Geologists Bulletin, v. 84, pp. 1543–1549.

Ferrill, D. A., J. A. Stamatakos, and D. Simmons, 1999, Normal fault corrugation: Implications for growth and seismicity of active normal faults: Journal of Structural Geology, v. 21, p. 1027–1038.

Fisher, W. L., and J. H. McGowen, 1967, Depositional systems in the Wilcox Group of Texas and their relationship to occurrence of oil and gas: Transactions Gulf Coast Association of Geological Societies, v. 27, p. 105–125.

Fitzgerald, P., and B. K. Pedersen, 2007, A technique for improving the accuracy of wireline depth measurements, SPE 110318, 2007 SPE Annual Technical Conference and Exhibition, 11–14 November, Anaheim, California.

Flinn, D., 1962, On folding during three-dimensional progressive deformation: Quarterly Journal of the Geological Society, v. 118, p. 385–433.

Forgotson, J. M., Jr., 1960, Review and classification of quantitative mapping techniques: American Association of Petroleum Geologists Bulletin, v. 44, p. 83–100.

Forsyth, D., H. Bolt, and T. Loermans, 2013. Improved depth quality measurement: Where old theory should meet (near) future practice, SPWLA (Society of Petrophysicists and Well Log Analysts) 54th Annual Logging Symposium, June 22–26, New Orleans, 13 p.

Fox, F. G., 1959, Structure and accumulation of hydrocarbons in southern Foothills, Alberta, Canada: American Association of Petroleum Geologists Bulletin, v. 43, p. 992–1025.

Frey, M. G., and W. H. Grimes, 1970, Bay Marchand-Timbalier Bay-Callou Island Salt Complex, Louisiana, in Halbouty, M. T., ed., Giant Oil and Gas Fields of the Decade 1968–1978: American Association of Petroleum Geologists Memoir 14, p. 277–291.

Frischknecht, F. C., R. Grette, P. V. Raab, and J. Meredith, 1985, Location of abandoned wells by magnetic surveys—Acquisition and interpretation of aeromagnetic data for five test areas: U.S. Geological Survey Open-File Report 85-614-A, 64 p.

Fugitt, D. S., J. E. Florstedt, G. J. Herricks, M. R. Wise, C. E. Stelting, and W. J. Schweller, 2000, Production characteristics of sheet and channelized turbidite reservoirs: Garden Banks191, Gulf of Mexico: The Leading Edge, v. 19, p. 356–369.

Gaafar, G. R., M. M., Altunbay, and A. A. Shaharudin, 2016, Perched-water, the concept and its effects on exploration and field development plans in sandstone and carbonate reservoirs, OTC-26653-MS, Offshore Technology Conference, Kuala Lumpur, Malaysia, 12 p.

Gatewood, L. E., 1970, Oklahoma City Field—Anatomy of a giant, in Halbouty, M. T., ed., Giant Oil and Gas Fields of the Decade 1968–1978: American Association of Petroleum Geologists Memoir 14, p. 223–254.

Geikie, A., 1903, Text-Book of Geology, fourth ed.: New York, Macmillan and Company, v. 1.

Geiser, P. A., 1988, The role of kinematics in the construction and analysis of geological cross sections in deformed terrains, in Mitra, G., and S. Wojtal, eds., Geometrics and Mechanisms of Thrusting, with Special Reference to the Appalachians: Geological Society of America, Special Paper 222, p. 47–76.

Ghignone, J. I., and G. Deandrade, 1970, General geology and major oilfields of Reconcavo Basin, Brazil, in Halbouty, M. T., ed., Giant Oil and Gas Fields of the Decade 1968–1978: American Association of Petroleum Geologists Memoir 14, p. 337–358.

Gibbs, A. D., 1983, Balanced cross section construction from seismic sections in areas of extensional tectonics: Journal of Structural Geology, v. 5, p. 153–160.

______, 1984, Structural elevation of extensional basin margins: Quarterly Journal of the Geological Society, v. 141, p. 609–620.

Giles, A. B., and D. H. Wood, 1983, Oakwood salt dome, east Texas: Geologic framework, growth history, and hydrocarbon production: Texas Bureau of Economic Geology, Geological Circular 83–1, 55 p.

Gill, W. D., 1953, Construction of geological sections of folds with steep-limb attenuation: American Association of Petroleum Geologists Bulletin, v. 37, p. 2389–2406.

Goguel, J., 1962, Tectonics, second ed.: San Francisco, W. H. Freeman and Co., 384 p.

Gordy, P. L., and F. R. Frey, 1975, Geological cross sections through the Foothills: Foothills Fieldtrip Guide Book, Canadian Society of Petroleum Geologists/Canadian Society of Exploration Geophysicists.

Gordy, P. L., F. R. Frey, and D. K. Norris, 1977, Geological guide for the Waterton-Glacier Park Field Conference: Canadian Society of Petroleum Geologists, 93 p.

Gow, K. L., 1962, Segno Field, Polk County, Texas, in Denham, R. L., ed., Typical Oil and Gas Fields of Southeast Texas: Houston, TX, Houston Geological Society, p. 187–191.

Gries, R. R., and R. C. Dyer, eds., 1985, Seismic Exploration of the Rocky Mountain Region: Denver, CO, Rocky Mountain Association of Geologists and Denver Geophysical Society, 300 p.

Groshong, R. H., Jr., 1975, “Slip” cleavage caused by pressure solution in a bucklefold: Geology, v. 3, p. 411–413.

______, 1989, Half graben structures: Balanced models of extensional fault-bend folds: Geological Society of America Bulletin, v. 101, p. 96–105.

Guiraud, M., and M. Seguret, 1985, A releasing solitary overstep model for the Late Jurassic—Early Cretaceous Soria strike-slip basin (northern Spain), in Biddle, K. T., and N. Christie-Blick, Strike-Slip Deformation, Basin Formation, and Sedimentation: Society of Economic Paleontologists and Mineralogists, Special Publication No. 37, p. 159–175.

Gwinn, V. E., 1964, Thin-skinned tectonics in the Plateau and northwestern Valley and Ridge province of the Central Appalachians: Geological Society of America Bulletin, v. 75, p. 863–900.

Halbouty, M. T., 1967, Salt Domes: Gulf Region, United States and Mexico: Houston, Gulf Publishing Company, 425 p.

______, 1979, Salt Domes: Gulf Region, United States and Mexico, second ed.: Houston, Gulf Publishing Company, 561 p.

______, 1982, The deliberate search for the subtle trap: American Association of Petroleum Geologists Memoir 32, 351 p.

Hamblin, W. K., 1965, Origin of “reverse drag” on the downthrown side of normal faults: Geological Society of America Bulletin, v. 76, p. 1145–1164.

Hammack, R. W., G. A. Veloski, D. G. Hodges, and C. M. White, 2016, Methods for Finding Legacy Wells in Large Areas, NETL-TRS-6-2016, EPAct Technical Report Series: Pittsburgh, PA, U.S. Department of Energy, National Energy Technology Laboratory, 28 p.

Hammes, U., and J. F. W. Gale, eds., 2013, Geology of the Haynesville Gas Shale in East Texas and West Louisiana, U.S.A.: American Association of Petroleum Geologists Memoir 105, 236 p.

Handley, E. J., 1954, Contouring is important: World Oil, v. 138, p. 106–107.

Hardage, B. A., R. P. Major, and T. F. Hentz, eds., 1998, Integrated strategies for carbonate reservoir growth: An example from the Ellenburger Group, Permian Basin, West Texas: University of Texas at Austin, Bureau of Economic Geology, Contract Report No. GRI-98/0070, 275 p.

Harding, T. P., 1973, Newport-Inglewood Trend, California—An example of wrenching style of deformation: American Association of Petroleum Geologists Bulletin, v. 57, p. 97–116.

______, 1974, Petroleum traps associated with wrench faults: American Association of Petroleum Geologists Bulletin, v. 58, p. 1290–1304.

______, 1976a, Predicting productive trends related to wrench faults: World Oil, v. 182, no. 7, p. 64–69.

______, 1976b, Tectonic significance and hydrocarbon trapping consequences of sequential folding synchronous with San Andreas faulting, San Joaquin Valley, California: American Association of Petroleum Geologists Bulletin, v. 60, p. 356–378.

______, 1984, Graben hydrocarbon occurrences and structural style: American Association of Petroleum Geologists Bulletin, v. 68, p. 333–362.

______, 1985, Seismic characteristics and identification of negative flower structures, positive flower structures, and positive structural inversion: American Association of Petroleum Geologists Bulletin, v. 69, p. 582–600.

______, 1990, Identification of wrench faults using subsurface structural data: Criteria and pitfalls: American Association of Petroleum Geologists Bulletin, v. 74, p. 1590–1609.

Harding, T. P., and J. D. Lowell, 1979, Structural styles, their plate-tectonic habitats, and hydrocarbon traps in petroleum provinces: American Association of Petroleum Geologists Bulletin, v. 63, p. 1016–1058.

Harrington, J. W., 1951, The elementary theory of subsurface structural contouring: Transactions American Geophysical Union, v. 32, p. 77–80.

Hart, B. S., 2011, Introduction to Seismic Interpretation: American Association of Petroleum Geologists Discovery Series No. 16 digital version.

Harth P., P. Ensign, and B. Davis, 2000, Rapidly and automatically tying time to depth using sequential volume calibration: SEG Technical Program Expanded Abstracts, p. 681–684.

Hartman, K., C. Joy, A. Reitz, L. Chetel, and S. Chakraborty, 2017, Immediate business impact from fast-track processing of long offset ocean-bottom nodes survey, Thunder Horse field, Gulf of Mexico: SEG Technical Program Expanded Abstracts 2017, p. 2215–2219.

Hartman, R. R., D. J. Teskey, and J. L. Friedberg, 1971, A system for rapid digital aeromagnetic interpretation: Geophysics, v. 36, p. 891–918.

Hay, J. T. C., 1978, Structural development in the northern North Sea: Journal of Petroleum Geology, v. 1, p. 65–77.

Heisey, E. L., ed., 1977, Rocky Mountain Thrust Belt Geology and Resources: Casper, WY, Wyoming Geological Society, 787 p.

Herold, S. C., 1933, Projection of dip angle on profile section: American Association of Petroleum Geologists Bulletin, v. 17, p. 740–742.

Herron, D. A., 2011, First Steps in Seismic Interpretation, Geophysical Monograph Series Number 16, Society of Exploration Geophysics, 203 p.

Heybroek, P., U. Haanstra, and D. A. Erdman, 1967, Observations on the geology of the North Sea area: Proceedings of the 7th World Petroleum Congress, v. 2, p. 905–916.

Hill, M. L., 1942, Graphic method for some geologic calculations: American Association of Petroleum Geologists Bulletin, v. 26, p. 1155–1159.

______, 1947, Classification of faults: American Association of Petroleum Geologists Bulletin, v. 31, p. 1669–1673.

______, 1959, Dual classification of faults: American Association of Petroleum Geologists Bulletin, v. 43, p. 217–237.

Hill, M. L., and T. W. Dibblee, 1953, San Andreas, Garlock, and Big Pine faults, California (a study of the character, history, and tectonic significance of their displacements): Geological Society of America Bulletin, v. 64, p. 443–458.

Hills, E. S., 1963, Elements of Structural Geology: London, Methuen & Co., 483 p.

Hooper, N. J., J. G. M. Raven, and M. J. Kilpatrick, 1992, Computer modeling of multiple surfaces with faults: The Ivanhoe Field, Outer Moray Firth Basin, U.K. North Sea, in Hamilton, D. E., and T. A. Jones, eds., Computer Modeling of Geologic Surfaces and Volumes: Tulsa, OK, American Association of Petroleum Geologists Bulletin, p. 161–174.

Horsfield, W. T., 1977, An experimental approach to basement-controlled faulting: Geologie en Mijnbouw, v. 56, p. 363–370.

______, 1980, Contemporaneous movement along crossing conjugate normal faults: Journal of Structural Geology, v. 2, p. 305–310.

Hossack, J. R., 1983, A cross-section through the Scandinavian Caledonides constructed with the aid of branch-line maps: Journal of Structural Geology, v. 5, p. 103–111.

Hubbert, M. K., 1937, Theory of scale models as applied to the study of geologic structures: Geological Society of America Bulletin, v. 77, p. 1247–1264.

______, 1953, Entrapment of petroleum under hydrodynamic conditions, American Association of Petroleum Geologists Bulletin, v. 37, pp. 1954–2026

Hubbert, M. K., and W. W. Rubey, 1959, Role of fluid pressure in mechanics of overthrust faulting: Geological Society of America Bulletin, v. 70, p. 115–166.

Hudec, M. R., and M. P. A. Jackson, 2007, Terra infirma: Understanding salt tectonics, Earth-Science Reviews, v. 82, p. 1–28.

Hughes, A. N., and J. H. Shaw, 2014, Fault displacement-distance relationships as indicators of contractional fault-related folding style, American Association of Petroleum Geologists Bulletin, v. 98, no. 2, p. 227–251.

Hull, C. E., and H. R. Warman, 1968, Asmari Oil Fields of Iran: London, British Petroleum Company, p. 428–437.

Illies, J. H., 1981, Mechanism of graben formation: Tectonophysics, v. 73, p. 249–266.

Ivanhoe, L. F., 1956, Integration of geological data on seismic sections: American Association of Petroleum Geologists Bulletin, v. 40, p. 1016–1023.

Jackson, M. P. A., and C. J. Talbot, 1991, A glossary of salt tectonics: Geological Circular, v. 91–94, University of Texas at Austin, Bureau of Economic Geology, 44 p.

Jackson, M. P. A., and S. J. Seni, 1983, Geometry and evolution of salt structures in a marginal rift basin of the Gulf of Mexico, east Texas: Geology, v. 11, p. 131–135.

Jackson, M. P. A., and W. E. Galloway, 1984, Structural and depositional styles of Gulf Coast Tertiary continental margins: Application to hydrocarbon exploration: American Association of Petroleum Geologists Bulletin, Continuing Education Course Note Series No. 25, 226 p.

Jaeger, J. C., 1962, Elasticity, Fracture and Flow with Engineering and Geological Application: London, Methuen, 268 p.

Jaeger, J. C., and N. G. W. Cook, 1969, Fundamentals of rock mechanics: London, Methuen, 513 p.

Jaeger, L. G., 1966, Cartesian Tensors in Engineering Science: New York, Pergamon Press, 166 p.

Jageler, A. H., and D. R. Matuszak, 1972, Use of well logs and dipmeters in stratigraphic-trap exploration: American Association of Petroleum Geologists Memoir 16, p. 107–135.

James, D. M. D., ed., 1984, The Geology and Hydrocarbon Resources of Negora Brunei Darussalam: Bandar Seri Begawan, Muzium Brunei, 169 p.

Jamieson, A., 2012, Introduction to Wellbore Positioning, V09.10.17, 247 p.

Jenyon, M. K., 1988, Fault-salt wall relationships, southern North Sea: Oil & Gas Journal, September 5 issue, p. 76–81.

Johanson, D. B., 1987, Structural evolution of Grand Lake Field, Cameron Parish, Louisiana: Transactions Gulf Coast Association of Geological Societies, v. 37, p. 113–122.

Johnson, H. A., and D. H. Bredeson, 1971, Structural development of some shallow salt domes in Louisiana Miocene Productive Belt, American Association of Petroleum Geologist Bulletin, v. 55, p. 204–226.

Jones, P. B., 1971, Folded faults and sequence of thrusting in Alberta Foothills: American Association of Petroleum Geologists Bulletin, v. 55, p. 292–306.

______, 1982, Oil and gas beneath east-dipping underthrust faults in the Alberta Foothills: Rocky Mountain Association of Geologists, v. 1, p. 61–74.

______, 1988, Balanced cross-sections – an aid to structural interpretation: The Leading Edge, v. 7, no. 8, p. 29–31.

Joyce, S., 2016, Abandoned Wells—Living on Top of Forgotten Oil and Gas Wells: Wyoming Public Radio broadcast, insideenergy.org.

Katz, D. L., M. W. Legatski, M. R. Tek, L. Gorring, and R. L. Neilsen, 1966, How water displaces gas from porous media: Oil and Gas Journal, January 10 issue, p. 55–60.

Kay, M., 1945, Paleogeographic and palinspastic maps: American Association of Petroleum Geologists Bulletin, v. 29, p. 426–450.

______, 1954, Isolith, isopach, and palinspastic maps (Geological Note): American Association of Petroleum Geologists Bulletin, v. 38, p. 916–917.

Kelley, V., 1971, Geology of Pecos Country, southern New Mexico: New Mexico Bureau of Mines and Mineral Resources, Memoir 24, 79 p.

Kendrick, J., 2000, Turbidite reservoir architecture in the Northern Gulf of Mexico deepwater: Insights from the development of Auger, Tahoe, and Ram/Powell fields, in Weimer P., et al. (eds.) Deep-Water Reservoirs of the World, Proceedings of the GCSSEPM Foundation 20th Annual Research Conference: Houston: Write Enterprise, p. 450–468.

Kennedy, W. Q., 1946, The Great Glen Fault: Quarterly Journal of the Geological Society, v. 102, p. 41–76.

Kerans, C., and H. S. Nance, 1991, High frequency cyclicity and regional depositional patterns of the Grayburg Formation, Guadalupe Mountains, New Mexico, in Meader-Roberts, S. J., M. P. Candelaria, and G. E. Moore, eds., Sequence Stratigraphy, Facies, and Reservoir Geometries of the San Andres, Grayburg and Queen Formations, Guadalupe Mountains, New Mexico: Society of Economic Paleontologists and Mineralogists, Special Publication 91–32, p. 53–70.

Klein, G. D., 1985, Sandstone Depositional Models for Exploration for Fossil Fuels, third ed.: Boston, International Human Resources Development Corporation, 209 p.

Kostenko O. V, S. J. Naruk, W. Hack, M. Poupon, H. Jurg Meyer, M. Mora-Glukstad, C. Anowai, and M. Mordi, 2008, Structural evaluation of column-height controls at a toe-thrust discovery, deep-water Niger Delta, American Association of Petroleum Geologists Bulletin, v. 92, no. 12, p. 1615–1638.

Kosters, E. C., D. G. Bebout, S. J. Seni, C. M. Garrett Jr., L. F. Brown Jr., H. S. Hamlin, S. P. Dutton, S. C. Ruppel, R. J. Finley, and N. Tyler, 1989, Atlas of Major Texas Gas Reservoirs: University of Texas at Austin, Bureau of Economic Geology, Atlas of Major Texas Gas Reservoirs, 161 p.

Krantz, B., C. Ormond, and B. Freeman, eds., 2016, 3-D Structural Interpretation: Earth, Mind, and Machine: American Association of Petroleum Geologists Memoir 111, 237 p.

Krumbein, W. C., 1942, Criteria for subsurface recognition of unconformities: American Association of Petroleum Geologists Bulletin, v. 26, p. 36–62.

______, 1948, Lithofacies maps and regional sedimentary stratigraphic analysis: American Association of Petroleum Geologists Bulletin, v. 32, p. 1909–1923.

______, 1952, Principles of facies map interpretation: Journal of Sedimentary Petrology, v. 22, p. 200–211.

Kuhme, A. K., 1987, Seismic interpretation of reefs: The Leading Edge, v. 6, no. 8, p. 60–65.

Kyte, D. G., D. N. Meehan, and T. R. Svor, 1994, Method of maintaining a borehole in a stratigraphic zone during drilling: United States Patent 5,311,951 (May 17, 1994).

Lafayette Geological Society, 1964, Typical oil and gas fields of Southwestern Louisiana: Lafayette, LA, Lafayette Geological Society, v. 1, 41 p.

______, 1970, Typical oil and gas fields of Southwestern Louisiana: Lafayette, LA, Lafayette Geological Society, v. 2, 30 p.

______, 1973, Offshore Louisiana Oil & Gas Fields: Lafayette, LA, Lafayette Geological Society, v. 3, 30 p.

Lamb, C. F., 1980, Painter Reservoir Field—Giant in Wyoming Thrust Belt: American Association of Petroleum Geologists Bulletin, v. 64, p. 638–373.

Lamerson, P. R., 1982, The Fossil Basin and its relationship to the Absaroka thrust system, Wyoming and Utah, in Powers, R. B., ed., Geologic Studies of the Cordilleran Thrust Belt: Denver, CO, Rocky Mountain Association of Geologists, p. 279–340.

Langstaff, C. S., and D. Morrill, 1981, Geologic Cross Sections: Boston, International Human Resources Development Corporation Press, 108 p.

Laubscher, H. P., 1961, Die Fernschilbhypothese der Jurafaltilng: Eclogae Geologicae Helvetiae, v. 54, p. 222–282.

______, 1977, Fold Development in the Jura: Tectonophysics, v. 37, p. 337–362.

Leake, J., and F. Shray, 1991, Logging while drilling keeps horizontal well on small target: Oil & Gas Journal, September 23 issue, p. 53–59.

LeBlanc, R. J., 1972, Geometry of sandstone reservoir bodies, in Cook, T. D., ed., Symposium on Underground Waste Management and Environmental Implications: American Association of Petroleum Geologists Memoir 18, p. 133–190.

Lelek, J. J., 1982, Geologic factors affecting reservoir analysis, Anschutz Ranch East Field, Utah-Wyoming: Society of Petroleum Engineers 15th Annual Offshore Technology Conference, Society of Petroleum Engineers Paper 10992.

Leroy, L. W., and J. W. Low, 1954, Graphic Problems in Petroleum Geology: New York, Harper & Bros., 238 p.

Leroy, L. W., D. O. Leroy, and J. W. Raese, eds., 1977, Subsurface Geology, fourth ed.: Golden, CO, Colorado School of Mines, 941 p.

Leroy, L. W., D. O. Leroy, J. W. Raese, and S. D. Schwochow, eds., 1987, Subsurface Geology, fifth ed.: Golden, CO, Colorado School of Mines, 1002 p.

Leroy, L. W., ed., 1950, Subsurface Geologic Methods—A Symposium, second ed.: Golden, CO, Colorado School of Mines, 1156 p.

Levorsen, A. I., 1943, Discovery thinking: American Association of Petroleum Geologists Bulletin, v. 27, p. 887–928.

______, 1954, Geology of Petroleum: San Francisco, W. H. Freeman and Co., 703 p.

Ley, H. H., 1930, Structure contouring: American Association of Petroleum Geologists Bulletin, v. 14, p. 103–105.

Li, Y., J. Jackson, S. Espinosa, and D. Faw, 2003, Uncertainties in mapping salt flanks with 3D Salt Proximity Survey, SPE 84574: SPE Annual Technical Conference and Exhibition, 5–8 October, Denver, Colorado, 16 p.

Lindsay, R. F., 1991, Grayburg Formation (Permian-Guadalpian): Comparison of reservoir characteristics and sequence stratigraphy in the Northwestern Central Basin Platform with outcrops in the Guadalupe Mountains, New Mexico, in Meader-Roberts, S. J., M. P. Candelaria, and G. E. Moore eds., Sequence Stratigraphy, Facies, and Reservoir Geometries of the San Andres, Grayburg and Queen Formations, Guadalupe Mountains, New Mexico: Society of Economic Paleontologists and Mineralogists, Special Publication 91–32, p. 111–118.

Link, M. H., and R. H. Osborne, 1982, Sedimentary facies of Ridge Basin, southern California, in Crowell, J. C., and M. H. Link, eds., Geologic History of Ridge Basin, Southern California: Society of Economic Paleontologists and Mineralogists, Pacific Section, p. 63–78.

Link, M. H., C. K. Taylor, N. G. Muñoz, J. E. Bueno, and P. J. Muñoz, 1996, 3-D seismic examples from Central Lake Maracaibo, Maraven’s Block 1 Field, Venezuela, in Weimer, P., and T. L. Davis, eds., Application of 3-D Seismic Data to Exploration and Production, American Association of Petroleum Geologists, Studies in Geology No. 42 and Society of Exploration Geophysicists Geophysical Developments Series No. 5: Tulsa, OK, American Association of Petroleum Geologists and Society of Exploration Geophysicists, p. 69–82.

Link, M., 2003, Sedimentation of Ridge Basin, in Crowell, J. C., ed., Evolution of Ridge Basin, Southern California: An Interplay of Sedimentation and Tectonics, Special Paper 37: Geological Society of America, p. 17–88.

Link, P. K., 1982, Basic Petroleum Geology: Tulsa, OK, Oil and Gas Consultants International, 235 p.

Link, T. A., 1949, Interpretations of foothills structures, Alberta, Canada: American Association of Petroleum Geologists Bulletin, v. 33, p. 1475–1501.

Lisowski, M., W. H. Prescott, J. C. Savage, and M. J. S. Johnston, 1990, Geodetic estimate of coseismic slip during the 1989 Loma Prieta, California, earthquake: Geophysical Research Letters, v. 17, p. 1437–1440.

Lister, G. S., M. A. Etheridge, and P. A. Symonds, 1986, Detachment faulting and the evolution of passive continental margins: Geology, v. 14, p. 246–250.

Lock, B. E., 1989, Subsurface Geological Investigations, unpublished course notes.

Lock, B. E., and S. L. Voorhies, 1988, Sequence stratigraphy as a tool for interpretation of the Cockfield/Yegua in Southwest Louisiana: Transactions Gulf Coast Association of Geological Societies, v. 39, p. 123–131.

Lou, M., D. Cheng, and F. Doherty, 2012, 3D anisotropic calculation of salt-face exit points for VSP salt proximity surveys, SEG 2012 Annual Meeting, 4–9 November, Las Vegas, 5 p.

Low, J. W., 1951, Subsurface maps and illustrations, in Leroy, L. W., ed., Subsurface Geologic Methods—A Symposium, second ed.: Golden, CO, Colorado School of Mines, p. 894–969.

Lowell, J. D., 1985, Structural Styles in Petroleum Exploration: Golden, CO, Oil & Gas Consultants International, 460 p.

Lyle, H. N., 1951, Southwest Texas faults: Oil & Gas Journal, v. 49, no. 41, p. 108–112.

Mackenzie, D. B., 1972, Primary stratigraphic traps in sandstone, in King, R. E., ed., Stratigraphic Oil and Gas Fields—Classification, Exploration Methods, and Case Histories: American Association of Petroleum Geologists Memoir 16, p. 47–66.

Mackin, J. H., 1950, The down-structure method of viewing geologic maps: Journal of Geology, v. 58, p. 55–77.

Macurda, D. B., Jr., 1987, Seismic interpretation of transgressive and progradational sequence: The Leading Edge, v. 6, no. 4, p. 18–21.

Malhase, J., 1927, Constructing geologic sections with unequal scales: American Association of Petroleum Geologists Bulletin, v. 11, p. 755–757.

Mannhard, G. W., and D. A. Busch, 1974, Stratigraphic trap accumulation in southwestern Kansas and northwestern Oklahoma: American Association of Petroleum Geologists Bulletin, v. 58, p. 447–463.

Marshak, S., and G. Mitra, 1988, Basic Methods of Structural Geology: Englewood Cliffs, NJ, Pearson, 446 p.

Martin, R. G., 1980, Distribution of salt structures in the Gulf of Mexico: Map and descriptive text: U.S. Geological Survey Map MF-1213.

May, R. S., K. D. Ehman, G. G. Gray, and J. C. Crowell, 1993, A new angle on the tectonic evolution of the Ridge Basin, a “strike-slip” basin in Southern California: Geological Society of America Bulletin, v. 105, p. 1357–1372.

Mayuga, M. N., 1970, Geology and development of California’s giant—Wilmington Oil Field, in Halbouty, M. T., ed., Geology of Giant Petroleum Fields: American Association of Petroleum Geologists Memoir 14, p. 158–184.

McClay, K., and M. Bonora, 2001. Analog models of restraining stepovers in strike-slip fault systems: American Association of Petroleum Geologists Bulletin, v. 85, 233–260.

McClay, K., and M. Bonora, 2001, Analog models of restraining stepovers in strike-slip fault systems: American Association of Petroleum Geologists Bulletin, v. 85, p. 233–260.

Medwedeff, D. A., 1988, Structural analysis and tectonic significance of Late-Tertiary and Quaternary compressive-growth folding, San Joaquin Valley, California [Ph.D. thesis]: Princeton University, 184 p.

______, 1989, Growth fault-bend folding at southeast Lost Hills, San Joaquin Valley, California: American Association of Petroleum Geologists Bulletin, v. 73, p. 54–67.

Medwedeff, D. A., and J. Suppe, 1986, Growth-fault bend folding—Precise deformation kinematics, timing and rates of folding and faulting from syntectonic sediments: Geological Society of America, Abstracts with Programs, v. 18, p. 692.

Merret, R., and R. W. Almendinger, 1991, Estimates of strain due to brittle faulting: Sample of fault populations: Journal of Structural Geology, v. 13, p. 735–738.

Merritt, J. W., 1946, Geotechniques of oil exploration: Oil Weekly, v. 121, no. 5, p. 17–26.

Mertie, J. B., Jr., 1947a, Calculation of thickness in parallel folds: Geological Society of America Bulletin, v. 58, p. 779–802.

______, 1947b, Delineation of parallel folds and measurement of stratigraphic dimensions: Geological Society of America Bulletin, v. 58, p. 779–802.

______, 1948, Application of Brianchon’s theorem to construction of geologic profiles: Geological Society of America Bulletin, v. 59, p. 767–786.

Mertosono, S., 1975, Geology of Pungut and Tandun Oil Fields, Central Sumatra: Indonesian Petroleum Association (June issue), p. 165–179.

Meyer, H. J., and H. W. McGee, 1985, Oil and gas fields accompanied by geothermal anomalies in Rocky Mountain region: American Association of Petroleum Geologists Bulletin, v. 69, p. 933–945.

Mitra, S., 1986, Duplex structures and imbricate thrust systems: Geometry, structural position, and hydrocarbon potential: American Association of Petroleum Geologists Bulletin, v. 70, p. 1087–1112.

______, 1988, Three-dimensional geometry and kinematic evolution of the Pine Mountain thrust system, southern Appalachians: Geological Society of America Bulletin, v. 100, p. 72–95.

______, 1993, Geometry and kinematic evolution of inversion structures: American Association of Petroleum Geologists Bulletin, v. 77, p. 1159–1191.

Mitra, S., and V. S. Mount, 1998, Foreland basement-involved structures: American Association of Petroleum Geologists Bulletin, v. 82, no. 1, p. 70–109.

Mitra, S., and J. Namson, 1989, Equal-area balancing: American Journal of Science, v. 289, p. 563–599.

Montgomery, S. L., 1997a, Raster logs may be basis for a geologic workstation: Oil and Gas Journal, April 7 issue, p. 84–88.

Montgomery, S. L., 1997b, A thing of beauty: Oil and Gas Investor, August issue, p. 49–51.

Moody, J. D., 1973, Petroleum exploration aspects of wrench-fault tectonics: American Association of Petroleum Geologists Bulletin, v. 57, p. 449–476.

Morales, M., E. Hung, and R. Bischke, 2005, Three-dimensional interpretation of the El Furrial trend, Eastern Venezuela Basin, Venezuela, in American Association of Petroleum Geologists Seismic Interpretation of Contractional Fault-Related Folds, AAPG Seismic Atlas Studies in Geology #53, Part 2, p. 83–86.

Morley, C. K., 1999, Patterns of displacement along large normal faults: Implications for basin evolution and fault propagation, based on examples from East Africa: American Association of Petroleum Geologists Bulletin, v. 83, p. 613–634.

Morley, C. K., R. A. Nelson, T. L. Patton, and S. G. Munn, 1990, Transfer zones in the East African Rift System and their relevance to hydrocarbon exploration in rifts: American Association of Petroleum Geologists Bulletin, v. 74, p. 1234–1253.

Mosar, J., and J. Suppe, 1988, Fault propagation folds: models and examples from the Pre-Alps and the Jura: 6ieme Reunion du Groupe Tectonique Suisse, Neuchatel, 8/9.

Motrenko, A., V. Strijov, G.-W. Weber, 2014, Bayesian sample size estimation for logistic regression: Journal of Computational Applied Mathematics, v. 255, p 743–752.

Mount, V. S., and J. Suppe, 1987, State of stress near the San Andreas fault: Implications for wrench tectonics: Geology, v. 15, p. 1143–1146.

______, 1992, Present-day stress orientations to active strike-slip faults: California and Sumatra: Journal of Geophysical Research, v. 97, p. 11,995–12,013.

Mount, V. S., J. Suppe, and S. C. Hook, 1990, A forward modeling strategy for balancing cross sections: American Association of Petroleum Geologists Bulletin, v. 74, p. 521–531.

Murray, G. E., 1968, Salt structures of Gulf of Mexico basin—A review, in Braunstein, J., and G. D. O’Brien, eds., Diapirism and Diapirs: American Association of Petroleum Geologists Memoir 8, p. 99–121.

Namson, J., 1981, Structure of the western Foothills Belt, Miaoli-Hsinchu area, Taiwan, (1) Southern Part: Petroleum Geology of Taiwan, no. 18, p. 31–51.

Narr, W., and J. Suppe, 1994, Kinematics of basement-involved compressive structures: American Journal of Science, v. 294, p. 802–860.

Needham, D. T., G. Yielding, and B. Freeman, 1996, Analysis of fault geometry and displacement patterns, in Buchanan, P. G., and D. A. Nieuwland, eds., Modern developments in structural interpretation, validation and modelling: Geological Society Special Publication 99, p. 189–199.

Nelson, P. H. H., 1980, Role of reflection seismic in development of Nembe Creek Field, Nigeria, in Halbouty, M. T., ed., Giant Oil and Gas Fields of the Decade 1968–1978: American Association of Petroleum Geologists Memoir 30, p. 565–576.

New Orleans Geological Society, 1965, Oil & Gas Fields of Southeast Louisiana, v. 1: New Orleans, LA, New Orleans Geological Society.

______, 1967, Oil & Gas Fields of Southeast Louisiana, v. 2: New Orleans, LA, as above.

______, 1983, Oil & Gas Fields of Southeast Louisiana, v. 3: New Orleans, LA, as above.

______, 1988, Offshore Louisiana Oil & Gas Fields, v. 2: New Orleans, LA, as above.

Nilsen, T. H., and R. J. McLaughlin, 1985, Comparison of tectonic framework and depositional patterns of the Hornelen strike-slip basins of Norway and the Ridge and Little Sulphur Creek strike-slip basins of California, in Biddle, K. T., and N. Christie-Blick., eds., Strike-slip Deformation, Basin Formation and Sedimentation: Society of Economic Paleontologists and Mineralogists, Special Publication No. 37, p. 79–103.

Norvick, M.S., 2001. Chronostratigraphic sections of the northern margins of the Australian plate: Final report. Unpublished report for AGSO, 3 September.

Nunns, A. G., 1991, Structural restoration of seismic and geological sections in extensional regimes: American Association of Petroleum Geologists Bulletin, v. 75, p. 278–297.

O’Brien, C., 1988, Pragmatic migration: A method for interpreting a grid of 2D migrated seismic data: The Leading Edge, v. 7, no. 2, p. 24–29.

O’Brien, J. O., 2004, Salt Proximity Survey, SEG Int’l Exposition and 74th Annual Meeting, 10–15 October, Denver, Colorado, 4 p.

Obert, L., and W. I. Duval, 1967, Rock Mechanics and the Design of Structures in Rock: New York, John Wiley & Sons, Inc., 650 p.

Ocamb, R. D., 1961, Growth faults of south Louisiana: Transactions Gulf Coast Association of Geological Societies, v. 11, p. 139–175.

Oppenheimer, D. H., 1990, Aftershock slip behavior of the 1989 Loma Prieta earthquake: Geophysical Research Letters, v. 17, p. 1199–1202.

Pacht, J. A., B. Bowen, B. L. Shaffer, and W. R. Pottorf, 1992, Systems tracts, seismic facies, and attribute analysis within a sequence stratigraphic framework—Example from offshore Louisiana Gulf Coast, in Rhodes, E. G., and T. F. Moslow, eds., Marine Clastic Reservoirs: New York, Springer-Verlag, p. 21–38.

Page, D., 1859, Handbook of Geological Terms and Geology: Edinburgh, William Blackwood & Sons, 415 p.

Payton, C. E., ed., 1977, Seismic Stratigraphy—Applications to Hydrocarbon Exploration: American Association of Petroleum Geologists Memoir 26, 516 p.

Peacock, D. C. P., and D. J. Sanderson, 1991, Displacements, segment linkage, and relay ramps in normal fault zones: Journal of Structural Geology, v. 13, p. 721–733.

Pedersen, B. K., and M. V. Constable, 2006, Operational procedures and methodology for improving LWD and wireline depth control, Kristen Field, Norwegian Sea: SPWLA 47th Annual Logging Symposium, June 4–7, Veracruz, Mexico.

Pelto, C. R., 1954, Mapping of multicomponent systems: Journal of Geology, v. 62, p. 501–511.

Pennebaker, P. E., 1972, Vertical net sandstone determination for isopach mapping of hydrocarbon reservoirs: American Association of Petroleum Geologists Bulletin, v. 56, p. 1520–1529.

Perrier, R., and J. Quiblier, 1974, Thickness changes in sedimentary layers during compaction history: Methods for quantitative evaluation: American Association of Petroleum Geologists Bulletin, v. 58, p. 507–520.

Perry, W. J., D. H. Roeder, and D. R. Lageson, 1984North American thrust-faulted terranes: American Association of Petroleum Geologists Bulletin, Reprint Series No. 27, 466 p.

Peters, W. C., 1987, Exploration and Mining Geology, fourth ed.: Golden, CO, Colorado School of Mines, 696 p.

Pettijohn, F. J., P. E. Potter, and R. Siever, 1972, Sand and Sandstone: New York, Springer-Verlag, 618 p.

______, 1987, Sand and Sandstone, second ed.: New York, Springer-Verlag, 553 p.

Pineda, W., and Bergeron, J., 2017, Understanding wireline depth control in wells with high cable tension and best practices to account for wireline stretch while performing stationary measurements: SPWLA 58th Annual Logging Symposium, June 17–21, Oklahoma City, Oklahoma.

Pochat, S., S. Castelltort, J. Van Den Driessche, K. Besnard, and C. Gumiaux, 2004, A simple method of determining sand/shale ratios from seismic analysis of growth faults: An example from upper Oligocene to lower Miocene Niger Delta deposits: American Association of Petroleum Geologists Bulletin., v. 88, p. 1357–1367.

Pollard, D. D., and P. Segall, 1987, Theoretical displacements and stresses near fractures in rock, with applications to faults, joints, veins, dikes and solution surfaces, in Atkinson, B. K., ed., Fracture Mechanics of Rock: New York, Academic Press, p. 277–350.

Posamentier, H. W., and P. R. Vail, 1988, Eustatic controls on clastic deposition II, in Wilgus, C. K., B. J. Hastings, H. Posamentier, J. C. Wagoner, C. A. Ross, and C. G. St. C. Kendall, eds., Sea Level Changes: An Integrated Approach: Society of Economic Paleontologists and Mineralogists, Special Publication 42, p. 125–154.

Posamentier, H. W., M. T. Jervey, and P. R. Vail, 1988, Eustatic controls on clastic deposition I, in Wilgus, C. K., B. J. Hastings, H. Posamentier, J. C. Van Wagoner, C. A. Ross, and C. G. St. C. Kendall, eds., Sea Level Changes: An Integrated Approach: Society of Economic Paleontologists and Mineralogists, Special Publication 42, p. 109–124.

Potter, P. E., 1963, Late Paleozoic sandstones of the Illinois Basin: Illinois State Geological Survey, Report of Investigations 217, 92 p.

Powers, R. B., ed., 1982, Geologic Studies of the Cordilleran Thrust Belt, 3 volumes: Denver, CO, Rocky Mountain Association of Geologists.

Price, R. C., 1986, The southeastern Cordillera: Thrust faulting, tectonic wedging and delamination of the lithosphere: Journal of Structural Geology, v. 8, p. 239–254.

Projects, SEG 2005 Annual Meeting, 6–11 November, Houston, Texas.

Ragan, D. M., 1985, Structural Geology: An Introduction to Geometrical Techniques: New York, John Wiley & Sons, 393 p.

Ramsay, J. G., 1967, Folding and fracturing of rocks: New York, McGraw-Hill, 568 p.

Rees, F. B., 1972, Methods of mapping and illustrating stratigraphic traps, in King, R. E., Stratigraphic Oil and Gas Fields—Classification, Exploration Methods, and Case Histories: American Association of Petroleum Geologists Memoir 16, p. 168–221.

Reid, H. F., 1909, Geometry of faults: Geological Society of America Bulletin, v. 20, p. 171–196.

Reid, H. F., W. M. Davis, A. C. Lawson, F. L. Ransome, and Committee, 1913, Report of the committee on the nomenclature of faults: Geological Society of America Bulletin, v. 24, p. 163–186.

Reiter, W. A., 1947, Contouring fault planes: World Oil, v. 126, no. 7, p. 34–35.

Reitz, A., and Hartman, K., 2017, Demonstrating the value of subsalt 3D VSPs; A case study at Thunder Horse North, Gulf of Mexico, SEG Technical Program Expanded Abstracts, p. 2210–2214.

Remmelts, G., 1995, Fault-related salt tectonics in the southern North Sea, The Netherlands, in Jackson, M. P. A., D. G. Roberts, and S. Snelson, eds., Salt tectonics: A Global Perspective: American Association of Petroleum Geologists Memoir 65, p. 261–272.

Rettger, R. E., 1929, On specifying the type of structural contouring: American Association of Petroleum Geologists Bulletin, v. 13, p. 1559–1560.

Rich, J. L., 1932, Simple graphical method for determining true dip from two components and for constructing contoured maps from dip observations: American Association of Petroleum Geologists Bulletin, v. 16, p. 92–94.

______, 1934, Mechanics of low-angle overthrust faulting as illustrated by Cumberland thrust block, Virginia, Kentucky, and Tennessee: American Association of Petroleum Geologists Bulletin, v. 18, p. 1584–1596.

______, 1935, Graphical method for eliminating regional dip: American Association of Petroleum Geologists Bulletin, v. 19, p. 1538–1540.

______, 1951, Three critical environments of deposition and criteria for recognition of rocks deposited in each of them: Geological Society of America Bulletin, v. 62, p. 1–20.

Rider, M. H., 1978, Growth faults in Carboniferous of Western Ireland: American Association of Petroleum Geologists Bulletin, v. 62, p. 2191–2213.

Rippon, J. H., 1985. Contoured patterns of the throw and hade of normal faults in the Coal Measures (Wesphalian) of the north-east Derbyshire. Proceedings of the Yorkshire Geological Society 45 (3), p. 147–161.

Robinson, J. P., 1982, Petroleum exploration in southeastern Arizona: Anatomy of an overthrust play, in Powers, R. B., ed., Geologic Studies of the Cordilleran Thrust Belt: Denver, CO, Rocky Mountain Association of Geologists, p. 665–674.

Roeder, D. H., 1973, Subduction and orogeny: Journal of Geophysical Research, v. 78, p. 5005–5024.

______, 1983, Hydrocarbons and Geodynamics of Folding Belts: Rocky Mountain Association of Geologists, Continuing Education Short Course Notes.

Rolfsvag, T. A., and Danielsen, T. M., 2016, Perched water static model, SPE-180000-MS, in Proceedings of the SPE Bergen One Day Seminar, 20 April, Bergen, Norway, 10 p.

Roux, W. F., Jr., 1978, The development of growth fault structures: American Association of Petroleum Geologists Bulletin, Structural Geology School Notes.

Rowan, M. G., and R. Kligfield, 1989, Cross-section restoration and balancing as aid to seismic interpretation in extensional terrains: American Association of Petroleum Geologists Bulletin, v. 73, p. 955–966.

Rowan, M. G., and R. Linares, 2000, Fold evolution matrices and axial surface analysis of fault bend folds: Application to the Medina Anticline, eastern Cordillera, Colombia: American Association of Petroleum Geologists Bulletin, v. 84, p. 741–764.

Rowan, M. G., M. P. A. Jackson, and B. D. Trudgill, 1999, Salt-related fault families and fault welds in the northern Gulf of Mexico, American Association of Petroleum Geologists Bulletin, v. 83, no. 9, p. 1454–1484.

Royse, F., Jr., M. A. Warner, and D. C. Reese, 1975, Thrust belt structural geometry and related stratigraphic problems, Wyoming-Idaho-northern Utah, in Bolyard, D. W., ed., Symposium on Deep Drilling Frontiers in the Central Rocky Mountains: Denver, CO, Rocky Mountain Association of Geologists, p. 41–54.

Sachnik, F. L., and R. D. More, 1983, Southern Appalachian faulting and folding, in Bally, A. W., ed., 1983, Seismic Expression of Structural Styles: American Association of Petroleum Geologists, Studies in Geology No. 15, v. 3, p. 3.4.1–79 to 3.4.1–82.

Sadler, P. M., 1999, The influence of hiatus on sedimentary accumulation rates, GeoResearch Forum, v. 5, p. 15–40.

Sanchez, R., J. Y. Chatellier, R. de Sifontes, N. Parra, and P. Muñoz, 1997, Multiple Bischke Plot Analysis, a powerful method to distinguish between tectonic or sedimentary complexity and miscorrelations: Memoras del Primero Congreso Latinoamericano de Sedimentologia, Sociedad Venezolana de Geologos, Tomo II, p. 257–264.

Sanford, A. R., 1959, Analytical and experimental study of simple geologic structures: Geological Society of America Bulletin, v. 70, p. 19–52.

Santiago-Acevedo, J., 1980, Giant fields of the Southern Zone, Mexico, in Halbouty, M. T., ed., Giant Oil and Gas Fields of the Decade 1968–1978: American Association of Petroleum Geologists Memoir 30, p. 339–385.

Schlumberger, 1987, Log Interpretation Principles/Applications: Schlumberger Educational Services.

Schmid, C. F., and E. H. Maccannell, 1955, Basic problems, techniques and theory of isopleth mapping: Journal of the American Statistical Association, v. 50, no. 269, p. 220–239.

Scholle, P. A., and D. Spearing, 1982, Sandstone Depositional Environments: American Association of Petroleum Geologists Memoir 31, 410 p.

Schwartz, S. Y., D. L. Orange, and R. S. Anderson, 1994, Complex fault interactions in a restraining bend on the San Andreas Fault, Southern Santa Cruz Mountains, California, in Simpson, R. W., ed., The Loma Prieta, California, Earthquake of October 17, 1989: Tectonic Processes and Models: United States Geological Survey Professional Paper 1550-F, p. F49–54.

Sclater, J. G., and P. A. F. Christie, 1980, Continental stretching: An explanation of the post-mid-Cretaceous subsidence of the central North Sea Basin: Journal of Geophysical Research, v. 85, p. 3711–3739.

Sebring, L., Jr., 1958a, Chief tool of the petroleum exploration geologist: The subsurface structural map: American Association of Petroleum Geologists Bulletin, v. 42, p. 561–587.

______, 1958b, Subsurface map: Underground guide for oil men: Oil and Gas Journal, v. 56, no. 27, p. 186–189.

Sengbush, R. L., 1986, Petroleum Exploration: A Quantitative Introduction: Boston, International Human Resources Development Corporation Press, 233 p.

Seni, S. J., and M. P. A. Jackson, 1983, Evolution of salt structures, east Texas diapir province, part 1: Sedimentary record of halokinesis: American Association of Petroleum Geologists Bulletin, v. 67, p. 1219–1244.

Serra, O., 1985, Sedimentary Environments from Wireline Logs: Schlumberger, 211 p.

Setchell, J., 1958, A nomogram for determining true stratum thickness: Shell Trinidad EP 28884, Abstract in PA Bulletin, No. 127/128: N. V. DeBataafache Petroleum Maatschappij, The Hague, Production Department, p. 8.

Shaw, A. B., 1964, Time in Stratigraphy: New York, McGraw Hill, 365 p.

Shaw, J. H., and J. Suppe, 1994, Active faulting and growth folding in the eastern Santa Barbara Channel, California: Geological Society of America Bulletin, v. 106, p. 607–626.

______, 1996, Earthquake hazards of active blind-thrust faults under the central Los Angeles basin, California: Journal of Geophysical Research, v. 101, p. 8623–8642.

Shaw, J. H., R. E. Bischke, and J. Suppe, 1994, Relations between folding and faulting in the Loma Prieta epicentral zone: Strike-slip fault bend folding, in Simpson, R. W., ed., The Loma Prieta, California, Earthquake of October 17, 1989: Tectonic Processes and Models: United States Geological Survey Professional Paper 1550-F, p. F3–21.

Shaw, J. H., C. C. Connors, and J. Suppe, 2005, Seismic interpretation of fault related contractional fault-related folds, American Association of Petroleum Geologists Seismic Atlas, Studies in Geology #53, 156 p.

Shaw, J. H., S. C. Hook, and E. P. Sitohang, 1997, Extensional fault-bend folding and synrift deposition: An example from the Central Sumatra Basin, Indonesia: American Association of Petroleum Geologists Bulletin, v. 81, p. 367–379.

Shelton, J. W., 1984, Listric normal faults: An illustrated summary: American Association of Petroleum Geologists Bulletin, v. 68, p. 801–815.

Sheriff, R. E., 1973, Encyclopedic Dictionary of Exploration Geophysics: Tulsa, OK, Society of Exploration Geophysicists, 266 p.

_____, 1977, Limitations on resolution of seismic reflections and geologic detail derivable from them, in C. E. Payton, ed., Seismic stratigraphy—Applications to hydrocarbon exploration: American Association of Petroleum Geologists Memoir 26, p. 3–14.

______, 1980, Seismic Stratigraphy: Boston, International Human Resources Development Corporation Press, 227 p.

______, 1989, Geophysical Methods: Englewood Cliffs, NJ, Pearson, 605 p.

Shoup, R., 2017, Geological cross sections: Combining geologic models and best practices to finding and exploiting reserves, hidden potential in mature basins: Play Analogs and Best Practices, Geosciences Technology Workshop, 13–14 September, Bandung, Indonesia.

Shumaker, R. C., 1992, Paleozoic structure of the Central Basin Uplift and adjacent Delaware Basin, West Texas, American Association of Petroleum Geologists Bulletin, v. 76, no.11, p. 1804–1824.

Silver, A., 1982, Techniques of Using Geologic Data: Oklahoma City, OK, IED Exploration.

Sinclair, S., L. Crespo, L. Waite, K. Smith, and C. Leslie, 2017, Resource assessment in the northern Midland Basin: Detailed mapping of Late Pennsylvanian, Wolfcampian, and Early Leonardian margins and flooding surfaces using well logs and seismic data: URTeC paper 2692102, p. 1–13.

Singer, J. M., 1992, An example of log interpretation in horizontal wells: The Log Analyst, March–April issue, p. 85–95.

Situmorang, B., E. T. Siswoyo, and F. Paltrinieri, 1976, Wrench fault tectonics and aspects of hydrocarbon accumulation in Java: Indonesian Petroleum Association, June issue, p. 53–67.

Skilbeck, C. G., and Lennox, eds., 1984, Seismic Atlas of Australia and New Zealand Sedimentary Basins: Sydney, Earth Resources Foundation, 301 p.

Sloss, L. L., 1984. Comparative anatomy of cratonic unconformities, in Schlee, J. S., ed., Interregional Unconformities and Hydrocarbon Accumulations, American Association of Petroleum Geologists Memoir, v. 36, p. 1–6.

Smith, D. A., 1966, Theoretical consideration of sealing and non-sealing faults: American Association of Petroleum Geologists Bulletin, v. 50, p. 363–374.

______, 1980, Sealing and nonsealing faults in Louisiana Gulf Coast Salt Basin: American Association of Petroleum Geologists Bulletin, v. 64, p. 145–172.

Smith, D. A., and F. A. E. Reeve, 1970, Salt piercement in shallow Gulf Coast salt structures: American Association of Petroleum Geologists Bulletin, v. 54, p. 1271–1289.

Smith, P. R., 1982, Sedimentology and diagenesis of the Miocene Peace Valley Formation, Ridge Basin, southern California, in Crowell, J. C, and M. H. Link eds., A Geologic History of Ridge Basin, Southern California: Los Angeles, CA, Pacific Section, Society of Economic Paleontologists and Mineralogist, Pacific Section, p. 151–158.

Smoluchowski, M., 1909, Folding of the earth’s surface: Information of mountain chains: Academy of Science Cracovie Bulletin, v. 6, p. 3–20.

Sneider, R. M., F. H. Richardson, D. D. Paytner, R. E. Eddy, and I. A. Wyant, 1977, Predicting reservoir rock geometry and continuity in Pennsylvanian reservoirs, Elk City Field, Oklahoma: Journal of Petroleum Technology, v. 29, p. 851–866.

Spencer, E. W., 1977, Introduction to the Structure of the Earth, second ed.: New York, McGraw-Hill, 640 p.

Stephenson, E. A., and D. D. Haines, 1946a, Preparation of contour maps: Oil and Gas Journal, v. 45, no. 15, p. 115.

______, 1946b, Use of contour maps: Oil and Gas Journal, v. 45, no. 16, p. 131.

Sterne, E. J., 2006, Stacked, “evolved” triangle zones along the southeastern flank of the Colorado Front Range: Mountain Geologist, v 43, p. 65–92.

Stewart, W. A., 1950, Unconformities, in Leroy, L. W., ed., Subsurface Geologic Methods—A Symposium, second ed.: Golden, CO, Colorado School of Mines.

Stigant, J., 2012, Geospatial Data Quality and Mapping in Shale Plays—Technical and Business Impact: Search and Discovery Article #40940.

Stockwell, C. H., 1947, The use of plunge in the construction of cross-sections of folds: Geological Association of Canada, v. 3, p. 97–121.

Stone, D. S., 1969, Wrench faulting and Rocky Mountain tectonics: Mountain Geologist, v. 6, no. 2, p. 67–79.

Stoneburner, R. K., 2017, The Evolution of the American Shale Plays: Where We Are and How We Got There: Search and Discovery Article #110228, p. 1–30.

Storey, M., 2013, Is well depth underestimated?: Oilfield Technology, v.6, no. 8, p. 29–32.

______, 2014, 10 Things to know about well logs: Foundations, Journal of the Professional Petroleum Data Management Association, v.1, no. 3, p. 19–21.

Storti, F., S Tavani, S. Merlini, A. Mosconi, and F. Salvini, 2005, Basil anticline, Northern Apennines, Italy, in American Association of Petroleum Geologists Seismic Interpretation of Contractional Fault-Related Folds, AAPG Seismic Atlas Studies in Geology #53, Part 2, p. 93–95.

Strahler, A. N., 1948, Geomorphology and structure of the West Kaibab fault zone and Kaibab Plateau, Arizona: Geological Society of America Bulletin, v. 59, p. 513–540.

Straley, W. H., III, 1932, Some notes on the nomenclature of faults: Journal of Geology (a University of Chicago Press journal), v. 42, no. 7 (Oct.–Nov.), p. 756–763.

Stude, G. R., 1978, Depositional environments of Gulf of Mexico South Timbalier Block 54 salt dome and salt dome growth models: Transactions Gulf Coast Association of Geological Societies, v. 28, p. 627–646.

Suppe, J. G., G. T. Chou, and S. C. Hook, 1992, Rates of folding and faulting from growth strata, in McClay, K. R., ed., Thrust Tectonics, New York, Chapman and Hall, p. 105–121.

Suppe, J., 1980, Imbricate structure of western Foothills Belts, south-central Taiwan: Petroleum Geology of Taiwan, no. 17, p. 1–16.

______, 1983, Geometry and kinematics of fault-bend folding: American Journal of Science, v. 283, p. 684–721.

______, 1985, Principles of Structural Geology: Englewood Cliffs, NJ, Pearson, 537 p.

______, 1988, Short Course on Cross-Section Balancing in Petroleum Structural Geology: Los Angeles, CA, Pacific Section, American Association of Petroleum Geologists.

Suppe, J., and D. A. Medwedeff, 1984, Fault-propagation folding: Abstracts with Programs, Geological Society of America Bulletin, v. 16, p. 670.

Suppe, J., and D. A. Medwedeff, 1990, Geometry and kinematics of fault-propagation folding: Eclogae Geologicae Helvetiae, v. 83, p. 409–454.

Suppe, J., and J. Namson, 1979, Fault-bend origin of frontal folds in the western Taiwan fold-and-thrust belt: Petroleum Geology of Taiwan, no. 6, p. 1–18.

Suppe, J., and Y. L. Chang, 1983, Kink method applied to structural interpretation of seismic sections, western Taiwan: Petroleum Geology of Taiwan, no. 19, p. 29–47.

Suppe, J., F. Sabat, J. A Munoz, J. Poblet, E. Roca, and J. Verges, Bed-by-bed fold growth by kink-band migration: Sant Llorens de Morunys, eastern Pyrenees, 1997, Journal of Structural Geology, v. 19, p. 443–461.

Suter, H. H., 1947, Exaggeration of vertical scale of geologic sections: American Association of Petroleum Geologists Bulletin, v. 31, p. 318–339.

Swiecicki, T., and K. Maynard, 2009, Geology and sequence, stratigraphy of Block 06/94, Nam Con Son Basin, Offshore Vietnam, in Proceedings of the 2009 South East Asia Petroleum Exploration Society (SEAPEX) Conference: Singapore, p. 1–17.

Sylvester, A. G., 1988, Strike-slip faults: Geological Society of America Bulletin, v. 100, p. 1666–1703.

Tanner, J. H., III, 1967, Wrench fault movements along Washita Valley Fault, Arbuckle Mountain area, Oklahoma: American Association of Petroleum Geologists Bulletin, v. 51, p. 126–141.

Taylor, J. C., 1973, Recent developments at Signal Hill, Long Beach oil field, in Guidebook for the Society of Economic Paleontologists and Mineralogists: Annual Meeting with the American Association of Petroleum Geologists and the Society of Economic Geophysicists, Field Trip 1, p. 16–25.

Tearpock, D. J., 1997, Project Management and Synergistic Team Development: Short Course Training Manual, Subsurface Consultants & Associates, LLC.

______, 1998, The ten commandments of quality interpretation and mapping: GeoLOGIC, a quarterly technical newsletter of Subsurface Consultants & Associates, Fall issue.

______, 1999, Rebuttal to expert witness reports of John C. Davis, Michael J. Economides, Jack C. Goldstein, and Harry F. Manbeck, Jr.: Union Pacific Resources Company, Plaintiff v. Chesapeake Energy Corporation and Chesapeake Operating, Inc., Defendants, C.A. No. 4–96CV-726-Y, Deposition Exhibit 10, Tearpock.

______, 2000, Outsourcing: A key to success in the twenty-first century: Energy Houston, v. 2.

Tearpock, D. J., and R. E. Bischke, 1980, The structural analysis of the Wissahickon Schist near Philadelphia, Pennsylvania: Geological Society of America Bulletin, v. 91, p. 644–647.

______, 1990, Mapping throw in place of vertical separation: A costly subsurface mapping misconception: Oil and Gas Journal, July 16, v. 88, no. 29, p. 74–78.

______, 1991, Applied Subsurface Geological Mapping: Upper Saddle River, NJ, Pearson, 648 p.

______, 2003, Applied Subsurface Geological Mapping: With Structural Methods, second ed.: Upper Saddle River, NJ, Pearson, 822 p.

Tearpock, D. J., R. E. Bischke, and J. L. Brewton, 1994, Quick Look Techniques for Prospect Evaluations: Lafayette, LA, Subsurface Consultants & Associates, 286 p.

Tearpock, D. J., and J. C. Brenneke, 2001a, Shared earth modeling: A true multidisciplinary approach to E&P: Energy Houston, v. 4, no. 1, p. 40–45.

______, 2001b, Multidisciplinary teams, integrated software for shared-earth modeling key E&P success: Oil and Gas Journal, December 10, p. 84–88.

Tearpock, D. J., and J. Harris, 1987, Subsurface Geological Mapping Techniques—A Training Manual: Tenneco Oil Co.

Tearpock, D. J., and J. Harris, 1990a, Applied Subsurface Mapping Techniques: Gulf Coast Association of Geological Societies Short Course, Annual Convention, Lafayette, LA.

Tearpock, D. J., and J. Harris, 1990b, Isopach Maps and Their Application in Subsurface Mapping: Lafayette Geological Society, Continuing Education Short Course Notes.

Tearpock, D. J., and J. Harris, 1990c, Quantitative Mapping Techniques: Houston Geological Society, Continuing Education Short Course Notes.

Tearpock, D. J., and H. Pousson, 1990, A three-dimensional correction factor equation for directionally drilled wells: Transactions Gulf Coast Association of Geological Societies, v. 40.

Thomas, W. A., 1968, Contemporaneous normal faults on flanks of Birmingham anticlinorium, central Alabama: American Association of Petroleum Geologists Bulletin, v. 52, p. 2123–2136.

Thompson, T., J. Vogt, and Y. Zaretskiy, 2017, Designing and validating 2D reservoir models, SPE-188066-MS, in Proceedings of the SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition, 24-27 April, Dammam, Saudi Arabia, p. 1–13.

Thorogood, J. L., 1986, Well surveying: Past progress, current status and future needs: World Oil, January issue, p. 87–91.

______, 1990, Instrument performance models and their application to directional surveying operations: Society of Petroleum Engineers, Paper 18051.

Thorsen, C. E., 1963, Age of growth faulting in southeast Louisiana: Transactions Gulf Coast Association of Geological Societies, v. 13, p. 103–110.

Tobias, S., 1990, Expansion profiles and sequence stratigraphy: A new way to identify systems tracts, sequence boundaries and eustatic histories, in Armentrout, J. M., and B. F. Perkins, Sequence Stratigraphy as an Exploration Tool—Concepts and Practices in the Gulf Coast; Eleventh Annual Research Conference, Gulf Coast Section, Society of Economic Paleontologists and Mineralogists: Austin, TX, Earth Enterprises, p. 351–361.

Todd, R. G., and R. M. Mitchum, 1977, Seismic stratigraphy and global changes of sea level, Part 8: Identification of Upper Triassic, Jurassic, and Lower Cretaceous seismic sequences in Gulf of Mexico and offshore West Africa, in Payton, C. E., ed., Seismic Stratigraphy—Applications to Hydrocarbon Exploration: American Association of Petroleum Geologists Memoir 26, p. 145–163.

Travis, R. B., 1978, Graphic determination of stratigraphic and vertical thicknesses in deviated wells: American Association of Petroleum Geologists Bulletin, v. 63, p. 845–866.

Trusheim, F., 1960, Mechanism of salt migration in northern Germany: American Association of Petroleum Geologists Bulletin, v. 44, p. 1519–1541.

Tucker, P. M., 1982, Pitfalls Revisited: Tulsa, OK, Society of Exploration Geophysicists, 19 p.

______, 1988, Seismic contouring: A unique skill: Society of Exploration Geophysicists, v. 53, no. 6, p. 741–749.

Tucker, P. M., and H. J. Yarston, 1973, Pitfalls in seismic interpretation: Society of Exploration Geophysicists, Monograph No. 2, 50 p.

Turk, L. B., 1950, Significance and use of lap-out maps in prospecting for oil and gas (Abs.): American Association of Petroleum Geologists Bulletin, v. 34, p. 625.

Usdansky, S. I., and R. H. Groshong, Jr., 1984a, Analytical extrapolation of cross sections of vertical drape folds by digital computer: Geological Society of America, Abstract with Programs, Part A, v. 16, p. 258.

______, 1984b, Comparison of analytical models for dip-domain and fault-bend folding: Geological Society of America, Abstract with Programs, Part B, v. 16, p. 680.

Vail, P. R., and R. M. Mitchum Jr., 1977, Seismic stratigraphy and global changes of sea level, Part I: Overview, in Payton, C. E., ed., Seismic Stratigraphy—Applications to Hydrocarbon Exploration, American Association of Petroleum Geologists Memoir 26, 516 p.

Vail, P. R., and W. Wornardt Jr., 1991, An integrated approach to exploration and development in the 90’s: Well log-seismic sequence stratigraphy analysis: Transactions Gulf Coast Association of Geological Societies, v. 41, p. 630–650.

Van Wagoner, J. C., H. W. Posamentier, R. M. Mitchum, P. R. Vail, J. F. Sarg, T. S., Loutit, and J. Hardenbol, 1988, An overview of the fundamentals of sequence stratigraphy and key definitions, in Wilgus, C. K., B. S. Hastings, C. G. St. C. Kendall, H. W. Posamentier, C. A. Ross, and J. C. Van Wagoner, eds., Sea Level Changes: An Integrated Approach: Society of Economic Paleontologists and Mineralogists, Special Publication No. 42, p. 39–45.

Van Wagoner, J. C., R. M. Mitchum, K. M. Campion, and V. D. Rahmanian, 1990, Siliciclastic sequence stratigraphy in well logs, cores, and outcrops: Concepts for high-resolution correlation of time and facies: American Association of Petroleum Geologists, Methods in Exploration 7, 55 p.

Vanderhill, J. B., 1991, Depositional setting and reservoir characteristics of Lower Queen (Permian Guadalupian) sandstones, Keystone (Colby) Field, Winkler County, Texas, in Meader-Roberts S., M. P. Candelaria, and G. E. Moore, eds., Sequence stratigraphy, facies, and reservoir geometries of the San Andres, Grayburg and Queen Formations, Guadalupe Mountains, New Mexico: Society of Economic Paleontologists and Mineralogists, Special Publication 91–32, p. 119–130.

Vogler, H. A., and B. A. Robison, 1987, Exploration for deep geopressure gas: Corsair Trend, offshore Texas: American Association of Petroleum Geologists Bulletin, v. 71, p. 777–787.

Wadsworth, A. H., Jr., 1953a, Percentage of thinning chart—New techniques in subsurface geology: American Association of Petroleum Geologists Bulletin, v. 37, no. 1, p. 158–162.

______, 1953b, The percentage of thinning chart: Oil and Gas Journal, v. 51, no. 43, p. 72–73.

Wallace, R. E., 1968, Notes on stream channel offsets by the San Andreas Fault, Southern Coastal Ranges, California, in Dickinson, W. R., and A. Grantz, eds., Proceedings of Conference on Geologic Problems of San Andreas Fault System: Palo Alto, CA, Stanford University Press, v. 11, p. 6–21.

______, 1973, Surface fracture patterns along San Andreas fault, in Kovach, R. L., and A. Nur, eds., Proceedings of Conference on Geologic Problems of San Andreas Fault System: Palo Alto, CA, Stanford University Press, v. 13, p. 248–258.

Warner, A., 2013, Applied Statistics for Bivariate through Multivariate Techniques, Thousand Oaks, CA, Sage, 1172 p.

Weber, K. J., 1995, Perched hydrocarbon-water contacts—A common but poorly understood phenomenon: Abstracts of the 57th EAGE Conference, Glasgow, F035.

Weber, K. J., and E. Daukora, 1976, Petroleum geology of the Niger Delta: Proceedings of the Ninth World Petroleum-Congress, v. 2, p. 209–221.

Weber, K. J., G. Mandl, W. F. Pilaar, F. Lehner, and R. G. Precious, 1978, The role of faults in hydrocarbon migration and trapping in Nigerian growth fault structures: 10th Annual Society of Petroleum Engineers Offshore Technological Conference, Preprint no. OTC-3356, p. 2643–2653.

Weiss, L. E., 1972, The Minor Structures of Deformed Rocks; A Photographic Atlas: New York, Springer-Verlag, 431 p.

Wernicke, B., 1985, Uniform-sense normal simple shear of the continental lithosphere: Canadian Journal of Earth Sciences, v. 22, p. 108–125.

Wernicke, B., P. L. Guth, and G. L. Axen, 1984, Tertiary extensional tectonics in the Sevier thrust belt of southern Nevada, in Lintz, J., ed., Western Geological Excursions, v. 4: Guidebook for the Annual Meeting of the Geological Society of America, Reno, NV, Mackay School of Mines, p. 473–510.

West, J., and H. Lewis, 1982, Structure and palinspastic reconstruction of the Absaroka Thrust, Anschutz Ranch area, Utah and Wyoming: Rocky Mountain Association of Geologists, 1982 Annual Symposium, p. 633–639.

Westaway, R., 1995. Deformation around stepovers in strike-slip fault zones, Journal of Structural Geology, v. 17, p. 831–846.

Weston, J. L., A. G. Ledroz, and R. Ekseth, 2014, New gyro while drilling technology delivers accurate azimuth and real-time quality control for all well trajectories: SPE Drilling & Completions, v. 29, no. 3, 295–303.

Wethe, D., 2015, Walking oil rigs spur cheaper, quicker drilling in supply glut: Rigzone, August 31.

Wharton, J. B., Jr., 1948, Isopachous maps of sand reservoirs: American Association of Petroleum Geologists Bulletin, v. 32, p. 1331–1339.

Wheeler, H. E., 1958, Time and stratigraphy: American Association of Petroleum Geologists Bulletin, v. 42, p. 1047–1063.

Wheeler, R. L., 1980, Cross-strike structural discontinuities: Possible exploration tool for natural gas in Appalachian Overthrust Belt: American Association of Petroleum Geologists Bulletin, v. 64, p. 2166–2178.

White, N. J., J. A. Jackson, and D. P. McKenzie, 1986, The relationship between the geometry of normal faults and that of the sedimentary layers in their hanging walls: Journal of Structural Geology, v. 8, p. 897–909.

Wiggins, G. B., and D. J. Tearpock, 1985, Methods in oil and gas reserves estimation: Prospects, newly discovered and developed properties: American Association of Petroleum Geologists, Annual Convention Short Course.

Wilcox, R. E., T. P. Harding, and D. R. Seely, 1973, Basic wrench tectonics: American Association of Petroleum Geologists Bulletin, v. 57, p. 74–96.

Wilgus, C. K., H. Posamentier, C. A. Ross, and C. G. St. C. Kendall, eds., 1988, Sea Level Changes: An Integrated Approach: Society of Economic Paleontologists and Mineralogists Special Publication No. 42, p. 39–45.

Wilkerson, S., and C. L. Dicken, 2001, Quick-look techniques for evaluating two-dimensional cross sections in detached contractional settings, American Association of Petroleum Geologists Bulletin, v. 85, p. 1759–1770.

Williamson, H., 1999, BP Amoco Upstream Technology Group Directional Survey Handbook (BPA-D-004), 260 p.

Wilson, C. W., and R. G. Stearns, 1958, Structure of the Cumberland Plateau, Tennessee: Geological Society of America Bulletin, v. 69, p. 1283–1296.

Wilson, H., J. C. Lofts, G. C. Page, A. G. Brooks, and D. Walder, 2004, Depth control: Reconciliation of LWD and Wireline Depths, Standard Practice and an alternative simple but effective method, SPE 89899: SPE Annual Technical Conference and Exhibition, 26–29 September, Houston, Texas, 11 p.

Winker, C. D., and M. B. Edwards, 1983, Unstable progradational clastic shelf margins, in Stanley, D. J., and G. T. Moore, eds., The Shelfbreak: Critical Interface on Continental Margins: Society of Economic Paleontologists and Mineralogists Special Publication No. 33, p. 139–157.

Winker, C. D., R. A. Morton, T. E. Ewing, and D. D. Garcia, 1983, Depositional setting, structural style, and sandstone distribution in three geopressured geothermal areas, Texas Gulf Coast: University of Texas, Bureau of Economic Geology, Report of Investigations 134, 60 p.

Winn, R. D., Jr., M.G. Bishop, and P. S. Gardner, 1985, Shallow-water and sub-storm-base deposition of Lewis Shale in Cretaceous Western Interior seaway, south-central Wyoming: American Association of Petroleum Geologists Bulletin, v. 71, p. 859–881.

Withjack, M. O., Q. T. Islam, and P. R. La Pointe, 1995, Normal faults and their hanging wall deformation: An experimental study: American Association of Petroleum Geologists Bulletin, v. 79, p. 1–18.

Wolff, C. J. M., and J. P. De Wardt, 1981, Borehole position uncertainty—Analysis of measuring methods and deviation of systematic error model: Journal of Petroleum Technology, v. 33, p. 2339–2350.

Wood, M. F., 1981, Depositional environments of the Apple Canyon Sandstone, Ridge Basin, central Transverse Range, California [MS thesis]: Los Angeles, University of Southern California, 266 p.

Woodbury, H. O., I. B. Murray Jr., and R. E. Osbourne, 1980, Diapirs and their relation to hydrocarbon accumulation, in Miall, A. D., ed., Facts and Principles of World Petroleum Occurrence: Canadian Society of Petroleum Geologists Memoir 6, p. 119–142.

Woodbury, H. O., I. B. Murray Jr., P. J. Pickford, and W. H. Akers, 1973, Pliocene and Pleistocene depocenters, outer continental shelf, Louisiana and Texas: American Association of Petroleum Geologists Bulletin, v. 57, p. 2428–2439.

Woodward, N. B., 1987, Stratigraphic separation diagrams and thrust belt structural analysis: Thirty-Eighth Field Conference, 1987 Wyoming Geological Association Guidebook, p. 69–77.

Woodward, N. B., S. E. Boyer, and J. Suppe, 1985, An Outline of Balanced Cross Sections: University of Tennessee Department of Geological Sciences, Studies in Geology 11, second ed.: Knoxville, University of Tennessee, 170 p.

Worrall, D. M., and S. Snelson, 1989, Evolution of the Gulf of Mexico, with emphasis on Cenozoic growth faulting and the role of salt, in Bally, A. W., and A. R. Palmer, The Geology of North America, v. A: Boulder, CO, Geological Society of America, p. 97–137.

Wright, T. L., 1991, Structural geology and tectonic evolution of the Los Angeles basin, California, in Biddle, K. T., ed., Active Margin Basins: American Association of Petroleum Geologists Memoir 52, p. 35–134.

Wyoming Geological Association, 1987, The Thrust Belt Revisited, Thirty-Eighth Field Conference Guidebook: Casper, WY, Wyoming Geological Association, 403 p.

Xiao, H., and J. Suppe, 1988, Origin of rollover: Geological Society of America, Annual Convention, Abstracts with Programs, p. A109.

______, 1989, Role of compaction in the listric shape of growth normal faults: American Association of Petroleum Geologists Bulletin, v. 73, p. 777–786.

______, 1992, Origin of rollover: American Association of Petroleum Geologists Bulletin, v. 76, p. 509–529.

Xiao, H., F. A. Dahlen, and J. Suppe, 1991, Mechanics of extensional wedges: Journal of Geophysical Research, v. 96, p. 10,301–10,318.

Xiaohan, L., 1983, Perturbations de contraintes liées aux structures cassantes dans les calcaires fins du Languedoc. Observations et simulations mathématiques [unpubl. 3 eme cycle thesis]: Montpellier, Université des Sciences et Techniques du Languedoc, 130 p.

Yeats, R. S., and J. M. Beall, 1991, Stratigraphic controls of oil fields in the Los Angeles Basin, in Biddle, K. T., ed., Active Margin Basins: American Association of Petroleum Geologists Memoir 52, p. 221–235.

Yielding, G., B. Freeman, and T. Needham, 1997, Quantitative fault seal prediction, American Association of Petroleum Geologists Bulletin, v. 81, 897–917.

Yielding, G., P. Bretan, and B. Freeman, 2010, Fault seal calibration: A brief review, in Jolley, S. J., Q. J. Fisher, R. B. Ainsworth, P. J. Vrolijk, and S. Delisle, eds., Reservoir Compartmentalization: London, The Geological Society, p. 243–255.

Zagorski, W. A., G. R. Wrightstone, and D. C. Bowman, 2012, The Appalachian Basin Marcellus gas play: Its history of development, geologic controls on production, and future potential as a world-class reservoir, in J. A. Breyer, ed., Shale Reservoirs—Giant Resources for the 21st Century: American Association of Petroleum Geologists Memoir 97, p. 172-200.

Zheng, Z., J. Kemeny, and N. G. Cook, 1989, Analysis of borehole breakouts: Journal of Geophysical Research, v. 94, p. 7171–7182.

Zoback, M. D., D. Moos, L. G. Mastin, and R. N. Anderson, 1985, Well bore breakouts and in situ stress: Journal of Geophysical Research, v. 90, p. 5523–5530.

Zoback, M. D., M. L. Zoback, V. S. Mount, J. Suppe, J. P. Eaton, J. H. Healy, D. Oppenheimer, P. Reasenberg, L. Jones, C. B. Raleigh, I. G. Wong, O. Scotti, C. Wentworth, 1987, New evidence on the state of stress of the San Andreas fault system: Science, v. 238, p. 1105–1111.