What can you create with the Pen tool?

With the Pen tool, you click to create anchor points. If you create two points, you’ve made a straight line.

To create a curve with the Pen tool, you press and drag to create an anchor point with direction lines. Anchor point direction lines give you precise control over the length and slope of the path coming into and out of an anchor point.

When you create curves with the Curvature tool or Pencil tool, direction lines are created automatically, but when drawing with those tools, you don’t see the direction lines, and you can’t interact with them.

Creating straight lines to make a crown

You’ll start drawing straight lines with the Pen tool to create the main path for a royal crown, like the one you see at the top of the first artboard.

1. Select the Pen tool () in the toolbar.

   

2. In the Properties panel, click the Fill color box. In the panel that opens, make sure the Swatches option () is selected, and select None ().

3. Click the Stroke box, and make sure that the color black is selected. Make sure the stroke weight is also 1 pt in the Properties panel.

   When you start drawing with the Pen tool, it’s usually best to have no fill on the path you draw because the fill can cover parts of the path you are trying to create. You can add a fill later, if necessary.

   

   Note

   If you see instead of the Pen icon (), the Caps Lock key is active. Caps Lock turns the Pen tool icon into for increased precision. After you begin drawing with the Caps Lock key active, the Pen tool icon looks like this: .

4. Move the pointer into the area labeled “Work Area” on the artboard, and notice the asterisk next to the Pen icon (), indicating that you’ll create a new path if you start drawing.

5. Move the pointer over the orange start point, “1,” and click to set the first anchor point.

6. Move the pointer away from the point you just created, and you’ll see a line connecting the first point and the pointer, no matter where you move the pointer.

   

   That line is called the Pen tool preview (or the rubber band). Later, as you create curved paths, it will make drawing them easier because it is a preview of what the path will look like. Also notice that the asterisk has disappeared from next to the pointer, indicating that you are now drawing a path.

   

7. Move the pointer over the gray dot labeled “2.” Click and release to create an anchor point.

   You just created a straight path. A path is composed of two anchor points and a line segment connecting those anchor points. The type of anchor point you just created is called a corner point. Corner points are not smooth like a curve; instead, they create an angle at the anchor point. Unlike the Curvature tool, the Pen tool creates corner points and straight lines by default.

   

8. Continue clicking points 3 through 7, releasing the mouse button after every click to create anchor points.

9. Select the Selection tool (), and leave the crown selected.

Selecting and editing paths in the crown

In Lesson 2 you were introduced to selecting content with the Selection and Direct Selection tools. Next, you’ll explore a few more options for selecting artwork with those same selection tools.

1. Select the Direct Selection tool ().

   

2. Move the pointer over the anchor point labeled 4; the anchor point will become a little larger than the others, and the pointer will show a small box with a dot in the center () next to it, as you see in the figure. Both of these indicate that if you click, you will select the anchor point. Click to select the anchor point, and the selected anchor point is filled (appears solid), whereas the other anchor points are hollow (unselected).

   

3. Drag the selected anchor point up to reposition it.

   The anchor point moves, but the others remain stationary. This is one method for editing a path, as you saw in Lesson 2.

4. Click in an empty area of the artboard to deselect.

   

5. Move the Direct Selection pointer over the path between points 5 and 6. When the pointer changes (), click to select.

   Note

   If the entire path disappears, choose Edit > Undo Cut, and try selecting the line segment again.

6. Choose Edit > Cut.

   This removes the selected segment between anchor points 5 and 6. You can see that because the shape wasn’t closed, it no longer shows the yellow fill in the whole object. Next you’ll learn how to connect the paths again.

   

7. Select the Pen tool (), and move the pointer onto the anchor point labeled 5. Notice that the Pen tool shows a forward slash (), indicating that if you click, you will continue drawing from that anchor point.

8. Click the point.

9. Move the pointer over the anchor point labeled 6. The pointer now shows a merge symbol next to it (), indicating that, if you click, you are connecting to another path. Click the point to reconnect the paths.

   

10. Choose Select > Deselect. Leave the file open for the next section.

Drawing a house with the Pen tool

In previous lessons, you learned that using the Shift key and Smart Guides in combination with shape tools constrains the shape of objects. The Shift key and Smart Guides can also constrain paths drawn with the Pen tool, allowing you to create straight paths with 45-degree angles.

Next, you’ll learn how to draw straight lines and constrain angles as you draw with the Pen tool.

1. Choose 2 from the Artboard Navigation menu in the lower-left corner of the Document window.

2. Select the Zoom tool () in the toolbar, and click in the area labeled “Work Area” in the artboard to zoom in.

3. Click the View menu, and choose Smart Guides to turn them on.

4. With the Pen tool () selected, in the Properties panel, make sure that the fill color is None (), the stroke color is Black, and the stroke weight is still 1 pt.

   

5. In the area labeled “Work Area,” click the orange point labeled 1, where you see “start,” to set the first anchor point.

6. Move the pointer above the original anchor point to the point labeled 2. Notice the gray measurement label that appears next to the pointer. That is showing because Smart Guides are on. Click to set another anchor point.

   

   As you’ve learned in previous lessons, the measurement label and magenta alignment guides you might see are part of the Smart Guides. The measurement labels showing distance can be useful when you’re drawing with the Pen tool.

   

   Note

   You may see a vertical magenta alignment guide telling you that the point will be lined up with content like the orange house in the top half of the artboard. This is a part of the Smart Guides.

7. Move the pointer over the anchor to the left, labeled 3. When you the pointer is aligned with the point labeled 2, it will “snap” in place. You may want to move the pointer around to feel this. Click to make the third anchor.

   

8. Click to set point 4, and then click to set point 5.

   When making those points, you may have seen other magenta alignment guides telling you that the point will be lined up with other content. These guides and the snapping can sometimes make it challenging to draw freeform paths with the Pen tool.

9. Choose View > Smart Guides to turn off the Smart Guides.

   With Smart Guides turned off, you’ll need to press the Shift key to align points, which is what you’ll do next. Also, with Smart Guides off, there is no measurement label, and the point is only aligning with the previous point because you are pressing the Shift key.

   

10. Press the Shift key, and click to set point 6 and then click to set point 7. Release the Shift key.

    

11. Move the pointer over point 1 (the first point). When the pointer shows a small circle next to it (), click to close the path.

Starting with curved paths

Now that you can create corner points, you’ll learn to create curves with the Pen tool. To create a curve with the Pen tool, you create anchor points and drag out direction handles to define the shape of the curve. This type of anchor point, with direction handles, is called a smooth point.

Drawing curves this way gives you some of the greatest control and flexibility in creating paths. However, mastering this technique does take some time. The goal for this exercise is not to create anything specific but to get accustomed to the feel of creating curves. First, you’ll get a feel for creating a simple curved path.

1. Choose 3 from the Artboard Navigation menu in the lower-left corner of the Document window. You will draw in the area labeled “Practice.”

2. Select the Zoom tool () in the toolbar, and click twice in the bottom half of the artboard to zoom in.

3. Select the Pen tool () in the toolbar. In the Properties panel, make sure that the fill color is None (), the stroke color is Black, and the stroke weight is still 1 pt.

   

4. With the Pen tool selected, click and release in an empty area of the artboard to create a starting anchor point. Move the pointer away.

   You’ll see the Pen tool preview showing what the path will look like if you click and release.

   

5. In an empty area, press and drag to create a curved path. Release the mouse button.

   As you drag away from the point, two direction handles appear. A Direction handle is a direction line that has a round direction point at the end. The angle and length of direction handles determine the shape and size of the curve.

   

6. Move the pointer away from the anchor point you just created to see the path preview. Move the pointer around a bit to see how it changes.

7. Continue pressing, dragging, and releasing in different areas to create a series of points.

8. Choose Select > Deselect. Leave the file open for the next section.

Drawing a curve with the Pen tool

In this part of the lesson, you’ll use what you just learned about drawing curves to trace a curved shape with the Pen tool. This will require a little more precision to follow a template path.

1. Press the spacebar to temporarily select the Hand tool (), and drag down until you see the curve at the top of the current artboard with points labeled 1 and 2.

2. With the Pen tool () selected, move the pointer over the point labeled 1. Press and drag up to the red dot, and then release the mouse button.

   Note

   The artboard may scroll as you drag. If you lose visibility of the curve, choose View > Zoom Out until you see the curve and anchor point. Pressing the spacebar allows you to use the Hand tool to reposition the artwork.

   

   So far you haven’t drawn anything yet; you’ve simply created a direction line going in the same general direction that the path will go (up). Dragging out a direction line on the very first anchor point can be done to create a more curved path.

3. Press and drag from point 2 down toward the red dot. Drag the pointer around to see how the path reacts. Pulling the direction handle longer makes a steeper curve; when the direction handle is shorter, the curve is flatter. When the pointer is over the red dot, release the mouse button, and the path you are creating should follow the gray template path.

   

   If the path you created is not aligned precisely with the template, select the Direct Selection tool (), and select the anchor points one at a time to show the direction handles. You can then drag the ends of the direction handles (called direction points) until your path better follows the template.

4. Select the Selection tool (), and click the artboard in an area with no objects, or choose Select > Deselect.

   Deselecting the first path allows you to create a new path. If you click somewhere on the artboard with the Pen tool while the path is still selected, the new path connects to the last point you drew.

   If you want to try drawing the same shape for more practice, scroll down to the Practice area in the same artboard and trace the shapes there. Make sure you deselect the previous artwork first.

Drawing a series of curves with the Pen tool

Now that you’ve experimented with drawing a curve, you will draw a shape that contains several continuous curves.

1. Choose 4 from the Artboard Navigation menu in the lower-left corner of the Document window. Select the Zoom tool (), and click several times in the top half of the artboard to zoom in.

2. Select the Pen tool (). In the Properties panel to the right of the document, make sure that the fill color is None (), the stroke color is black, and the stroke weight is still 1 pt.

3. Press and drag up from point 1, labeled “start,” in the direction of the arc, stopping at the red dot. This is exactly how you started the last path.

   

   Note

   Don’t worry if the path you draw is not exact. You could correct the path by selecting it with the Direct Selection tool () when the path is complete.

   Tip

   As you are dragging out the direction handles for an anchor point, you can press and hold the spacebar to reposition the anchor point. When the anchor point is where you want it, release the spacebar and continue drawing.

4. Move the pointer over the point labeled 2 and drag down to the red dot, adjusting the path between points 1 and 2 by dragging before you release the mouse button.

   When it comes to curves, you’ll find that you spend a lot of time focusing on the path segment behind the current anchor point you are creating. Remember, by default, there are two direction lines for an anchor point. The trailing direction line controls the shape of the segment behind the anchor point.

   

5. Continue along the path, alternating between dragging up at point 3, down at point 4, and up at point 5. Put anchor points only where there are numbers, and finish with the point labeled 6.

   If you make a mistake as you draw, you can undo your work by choosing Edit > Undo Pen and then draw the last point again. If your direction lines don’t match the figures, that’s okay.

6. When the path is complete, select the Direct Selection tool (), and click to select any anchor point in the path.

   When an anchor point is selected, the direction handles appear, and you can readjust the curve of the path, if necessary. With a curve selected, you can also change the stroke and fill. When you do this, the next line you draw will have the same attributes. If you want to try drawing the shape again for more practice, scroll down to the bottom half of the same artboard (labeled “Practice”), and trace the shape there.

7. Choose Select > Deselect, and then choose File > Save.

Converting smooth points to corner points

When you create curves, the direction handles help to determine the shape and size of the curved segments, as you’ve seen. If you want to create a curved path followed by a straight line, for instance, you can remove the direction lines from an anchor point to convert a smooth point into a corner point. In this next part of the lesson, you’ll practice converting between smooth points and corner points.

1. Choose 5 from the Artboard Navigation menu in the lower-left corner of the Document window.

   On the top of the artboard, you can see the path that you will trace. You’ll use the top artboard as a template for the exercise, creating your paths directly on top of those.

2. Select the Zoom tool (), and click several times in the top part of the artboard to zoom in.

3. Select the Pen tool (). In the Properties panel, make sure that the fill color is None (), the stroke color is Black, and the stroke weight is still 1 pt.

   

4. Pressing the Shift key, press and drag up from point 1, labeled “start,” in the direction of the arc, stopping at the red dot. Release the mouse button and then release the Shift key.

   Pressing the Shift key when dragging constrains the direction handles to multiples of 45°. Next, you’ll repeat the same step process for point 2.

5. From point 2, Shift-drag down to the gold dot. When the curved path between 1 and 2 looks correct and the pointer reaches the gold dot, release the mouse button and then release the Shift key. Leave the path selected.

   

   Now you need the path to switch directions and create another arc. You will split the direction lines, or move them in different directions from each other, to convert a smooth point to a corner point.

   When you press and drag to create a smooth anchor point with the Pen tool, you create a leading direction line and a trailing direction line. By default, they are equal and paired together.

   Note

   The Option (macOS) or Alt (Windows) key essentially allows you to split the direction lines so that they are independent of each other for that anchor point.

6. Press the Option (macOS) or Alt (Windows) key, and move the pointer over the anchor point you just created (on point 2). When a convert-point icon (^) appears next to the Pen tool pointer (), press and drag a new direction line up to the red dot above. Release the mouse button and then release the modifier key. If you do not see the caret (^), you might end up creating an additional loop.

   

   You can also Option-drag (macOS) or Alt-drag (Windows) the end of a direction handle (called the direction point). Either method “splits” the direction handles so they can go in different directions.

7. Move the Pen tool pointer over point 3 to the right on the template path, and drag down to the gold dot. Release the mouse button when the path looks similar to the template path.

8. Press the Option (macOS) or Alt (Windows) key, and move the pointer over the last anchor point you created (at 3). When a convert-point icon (^) appears next to the Pen tool pointer (), press and drag a direction line up to the red dot above. Release the mouse button, and then release the modifier key.

   For the next point, you will work faster by not releasing the mouse button to split the direction handles, so pay close attention.

   Tip

   You can watch these steps in a video! Check out the videos that are a part of the Web Edition. For more information, see the “Web Edition” section of “Getting Started” at the beginning of the book.

9. For anchor point 4, press and drag down to the gold dot until the path looks correct. This time, do not release the mouse button. Press the Option (macOS) or Alt (Windows) key, and drag up to the red dot for the next curve. Release the mouse button, and then release the modifier key.

   

10. Continue this process using the Option (macOS) or Alt (Windows) key to create corner points. Keep doing this until the path is completed.

11. Use the Direct Selection tool to fine-tune the path, and then deselect the path.

Combining curves and straight lines

When you’re drawing your own artwork with the Pen tool, you’ll need to transition easily between curves and straight lines. In this next section, you’ll learn how to go from curves to straight lines and from straight lines to curves.

1. Choose 6 from the Artboard Navigation menu in the lower-left corner of the Document window. Select the Zoom tool (), and click several times in the top half of the artboard to zoom in.

2. Select the Pen tool (). Move the pointer over point 1, labeled “start,” and press and drag up, stopping at the red dot. Release the mouse button.

   Up to this point, you’ve been dragging to a gold or red dot in the templates. In the real world those obviously won’t be there, so for the next point you will drag to create a point without much guidance. Don’t worry, you can always choose Edit > Undo Pen and try again!

   

3. Press and drag down from point 2, and release the mouse button when the path between 1 and 2 roughly matches the gray template path.

   This method of creating a curve should be familiar to you by now.

   If you were to continue drawing by clicking point 3, even pressing the Shift key (to produce a straight line), the path would be curved (don’t do either). The last point you created is a smooth anchor point and has a leading direction handle (the one you pulled out). The previous figure shows what the path would look like if you clicked with the Pen tool on the next point. You will now continue the path as a straight line by removing the leading direction handle.

4. Move the pointer over the last point created (point 2). When the convert-point icon appears (), click. This deletes the leading direction handle from the anchor point (not the trailing direction handle), as shown in the second part of the following figure.

   

   

5. Move the pointer over point 3. Pressing the Shift key, click and release to create the next point. Release the Shift key after clicking, and you’ve created a straight line.

   

6. For the next arc, move the pointer over the last point created. When the convert-point icon appears (), press and drag down from that point to the red dot. This creates a new, independent direction line.

   For the rest of this section, I’m going to ask you to complete the path, following the remaining part of the template. I don’t include any figures, so go through the figures in the previous steps if you need guidance.

7. For the next point (point 4), press and drag up to complete the arc.

8. Click the last anchor point you just created to remove the direction line.

9. Shift-click the next point to create the second straight segment.

10. Press and drag up from the last point you created to create a direction line.

11. Press and drag down on the end point (point 6) to create the final arc.

12. Choose File > Save, and then choose File > Close.

Remember, you can always go back and work on those Pen tool templates in the L7_practice.ai file as many times as you need. Take it as slowly as you need and practice, practice, practice.

Drawing the swan

Now that you have the file open and ready, you’re going to put your Pen tool practice to use by drawing a beautiful swan. This next section has more than the average number of steps, so take your time.

1. With the Pen tool () selected, press and drag from the blue square labeled “A” on the swan body template to the red dot. This sets the starting anchor point and direction of the first curve.

   

2. Move the pointer over point B. Press and drag, stopping at the gold dot. Release the mouse button.

   Remember to pay attention to how the path you are creating looks as you drag the direction line. It’s easier when dragging to color dots on a template, but when you’re creating your own content, you’ll need to focus on what the path looks like.

   

   Next, you’ll split the direction handles so the path can go in a different direction.

3. Move the pointer over point B again, and when the pointer changes (), press Option (macOS) or Alt (Windows) and drag away from the point to the red dot to create a new direction line. Release the mouse button and then the key.

   

4. Move the pointer over point C. Click and release to add a point.

5. To make the next path a curve, move the pointer over the anchor point you just created at point C—press and drag to the red dot to add a direction handle.

   

6. Move the pointer over point D. Press and drag to the red dot.

   The next part of the path needs to be straight, so the direction line on point D needs to be removed.

   

7. Move the Pen tool pointer over point D again. When the convert-point icon () appears next to the pointer, click point D to remove the leading direction handle (the handle pointing up).

   

8. Click and release on point E to make a straight line.

   

   As you draw with the Pen tool, you may want to edit part of a path you previously drew. By pressing a modifier key with the Pen tool selected, you can move the pointer over a previous path segment and drag to modify it, which is what you’ll do next.

   Tip

   You can also press Option+Shift (macOS) or Alt+Shift (Windows) to constrain the handles on each anchor point to a perpendicular direction, which ensures that the handles are the same length.

9. Move the pointer over the path between points D and E. Press the Option (macOS) or Alt (Windows) key. The pointer changes appearance (). Drag the path up to make it curved, as you see in the figure. Release the mouse button and then the key. This adds direction handles to the anchor points at both ends of the line segment.

   After releasing the mouse button, notice that as you move the pointer, you can see the Pen tool rubber banding, which means you are still drawing the path.

   

   The path that continues from point E needs to be curved, so you’ll need to add a leading direction handle to the point.

   Note

   After releasing the mouse button in this step (10), if you move the pointer away and then bring it back to point E, the convert-point icon [^]will appear next to the pointer.

10. With the Pen tool pointer over point E, press and drag up to the red dot to create a new direction handle.

    

    This creates a new leading direction handle and sets up the next path to be a curve.

11. Continue drawing by dragging from the anchor point at F to the red dot.

    Tip

    When creating an anchor point, you can press the spacebar to move the point as you create it.

12. Drag from point G to the red dot.

    The next part of the path needs to be straight, so you’ll remove the leading direction handle from the point at G.

13. Move the pointer back over point G. When the convert-point icon appears () next to the pointer, click to remove the direction handle.

    

14. Click point H to create a new anchor point.

    The next part of the path needs to be curved, so you will need to add a leading direction handle to point H.

15. Move the Pen tool pointer over point H again. When the convert-point icon () appears next to the pointer, press and drag from point H up to the red dot to add a leading direction handle.

    

16. Continue drawing the point at I by dragging from the anchor point to the gold dot. Release the mouse button.

17. Press Option (macOS) or Alt (Windows), and when the pointer changes (), drag the end of the direction handle down to the red dot from the gold dot.

    

18. Drag from point J to the red dot.

    Next, you’ll complete the drawing of the swan by closing the path.

    

19. Move the Pen tool pointer over point A without clicking.

    Notice that an open circle appears next to the Pen tool pointer (), indicating that the path would close if you were to click the anchor point (don’t click yet). If you were to drag, the direction handles on either side of the point would move as a single straight line. You need to extend one of the direction handles to match the template.

20. Drag left and a little up. Notice that a direction handle shows to the right of the anchor point and is growing in the opposite direction (it’s going down and to the right). Drag until the curve looks right.

    

    Normally, as you drag away from a point, direction lines appear before and after the point. Without the modifier key, as you drag away from a closing point, you are reshaping the path before and after the anchor point. Pressing the Option (macOS) or Alt (Windows) modifier key on the closing point allows you to edit the previous direction handle independently.

21. Click the Properties panel tab. Click the Fill color and select white.

    Note

    This is a shortcut method for deselecting a path while keeping the Pen tool selected. You could also choose Select > Deselect, among other methods.

22. Command-click (macOS) or Ctrl-click (Windows) away from the path to deselect it, and then choose File > Save.

Deleting and adding anchor points

Most of the time, the goal of drawing paths with a tool like the Pen tool or Curvature tool is to avoid adding more anchor points than necessary. You can reduce a path’s complexity or change its overall shape by deleting unnecessary points (and therefore gain more control over the shape), or you can extend a path by adding points to it. Next you’ll delete anchor points from, and add anchor points to, different parts of the swan path.

1. Open the Layers panel (Window > Layers). In the Layers panel, click the eye icon () for the layer named “Bird template” to hide the layer contents.

2. With the Direct Selection tool () selected, click right on the swan path to select it.

   To start you’ll delete a few points in the tail to simplify the swan path.

3. Select the Pen tool () in the toolbar, and move the pointer over the anchor point you see in the first part of the following figure. When a minus sign (—) appears to the right of the Pen tool pointer (), click to remove the anchor point.

   Tip

   With an anchor point selected, you can also click Remove Selected Anchor Points () in the Properties panel to delete the anchor point.

4. Move the pointer over the anchor point in the second part of the following figure. When a minus sign (—) appears to the right of the Pen tool pointer (), click to remove the anchor point.

   

   Next you’ll reshape the remaining path. With the Pen tool selected, you can press Command (macOS) or Ctrl (Windows) to temporarily select the Direct Selection tool so you can edit a path and then release the key and continue drawing.

   

5. Press Command (macOS) or Ctrl (Windows) to temporarily select the Direct Selection tool. With the key held down, move the pointer over the anchor point shown in the figure. When the pointer shows a box next to it (), click to select the anchor point if it isn’t already.

   

   Note

   It can be tricky to drag the end of a direction line. If you wind up missing and deselecting the path, with the modifier key still held down, click the path and then click the anchor point to see the direction handles and try again.

6. With the key still held down, drag the direction line pointing down from the selected anchor point to reshape the path, and release the key.

   With that part of the path reshaped, now you’ll add a new anchor point to the path so you can reshape it further.

   

7. Move the pointer over the left side of the swan path, below the selected anchor point. When a plus sign (+) appears to the right of the Pen tool pointer (), click to add an anchor point.

   

8. Press Command (macOS) or Ctrl (Windows) to temporarily select the Direct Selection tool, and drag the new anchor to the left to reshape the path. Release the key.

   Lastly, you’ll add a new anchor point to the bottom of the swan path so that in the next section you can reshape the bottom.

   

9. Move the pointer over the bottom part of the path. When a plus sign (+) appears to the right of the Pen tool pointer (), click to add an anchor point.

Converting between smooth points and corner points

To more precisely control the path you create, you can convert points from smooth points to corner points and from corner points to smooth points, using several methods. This will give the bird a flat bottom so it looks like it’s in water.

1. Select the Direct Selection tool (). With the last point you added still selected, Shift-click the anchor point to the left (formerly labeled “A”) to select both.

   Tip

   You could also convert between corner and smooth points by double-clicking (or Option-clicking [macOS] or Alt-clicking [Windows]) an anchor point with the Curvature tool.

2. In the Properties panel, click the Convert Selected Anchor Points To Corner button () to convert the anchor points to corners.

   

   Note

   If the points align to the artboard after clicking the align button, try again. Make sure that Align To Key Anchor is selected in the Properties panel first.

3. Click the Vertical Align Bottom button () in the Properties panel to align the point you first selected to the second point you selected.

   

   As you saw in Lesson 2, selected anchor points align to the last selected anchor point, which is known as the key anchor.

4. Choose Select > Deselect and then File > Save.

Converting anchors with the Anchor Point tool

The Anchor Point tool is another way to convert anchor points between smooth and corner points (). With this tool, you can convert anchors as you did in the previous section, but you can adjust the paths with it simultaneously. You’ll use the tool to finish the head of the swan.

1. Select the Selection tool (), and click the swan path to select it.

2. Press and hold on the Pen tool () in the toolbar to reveal another tool. Select the Anchor Point tool ().

   If you click an anchor point with the Anchor point tool, the direction lines are removed and it becomes a corner point. The Anchor point tool is also used either to remove one or both of the direction handles from an anchor point, converting it to a corner point, or to drag out direction handles from an anchor point. Dragging handles out with the Anchor point tool can be a great way to restore handles that have been split.

   

   Note

   Don’t drag if the pointer looks like this: . This means that the pointer is not over the anchor point, and if you drag, you will reshape the curve.

   Tip

   If you move the Anchor Point tool pointer over the end of a direction handle that is split, you can press the Option (macOS) or Alt (Windows) key and, when the pointer changes (), click to make the direction handles a single straight line again (not split).

3. Move the pointer over the point in the swan’s head in the figure. When the pointer looks like , press and drag up from the corner point to drag the direction handles out. Drag until the neck looks similar to how it did before you started dragging.

   Depending on which direction you drew the path in, dragging in one direction may reverse the direction handles.

   

4. Move the pointer over the anchor point to the right of the anchor point you just edited. Press and drag down when the pointer looks like this: . Make sure the top of the swan’s head looks similar to the way it did.

   

5. Select the Direct Selection tool, and drag the end of the bottom direction handle up to shorten it and make the line less curvy.

   The direction handles for an anchor point are split when you create them with the Anchor Point tool, which means you can move them independently. Next you’ll convert an anchor point from a smooth point (with direction handles) to a corner point.

Practice with the Convert Anchor point tool

Now you’ll practice with the Convert Anchor point tool to finish the swan.

1. Open the Layers panel (Window > Layers). In the Layers panel, click the visibility column for the layer named “Wing” and the layer named “Background” to show the content for both.

   You should now see the wing of the swan on top of the swan shape you drew. It’s made up of a series of simple paths that overlap each other. You need to make the right edge of the wing a corner point, not a smooth point.

   

2. With the Direct Selection selected, click the larger wing shape to select it and see the anchor points.

   

3. Select the Anchor Point tool () in the toolbar. Move the pointer over the point circled in the first part of the following figure. Click to convert the point from a curve (smooth point with direction handles) to a corner point.

   

4. Select the Direct Selection tool, and drag the anchor point you converted. Snap it to the anchor point at the base of the swan’s neck.

5. Move the pointer over the end of the direction handle coming from the top anchor point, and drag to change the shape of the path.

   

   

6. Choose Select > Deselect.

7. Choose View > Fit Artboard In Window.

8. Save and close the file by choosing File > Save and then File > Close.