Contributor contact details
Dr Fengge Gao, Reader in Nanotechnology, School of Science and Technology, Nottingham Trent University, Clifton Lane, Nottingham, NG11 8NS, UK. E-mail address: [email protected]
V.M. Karbhari*, University of Alabama in Huntsville, 366 Shelbie King Hall, Huntsville, AL 35899, USA. E-mail address: [email protected]
C.T. Love, U.S. Naval Research Laboratory, Alternate Energy Section, 4555 Overlook Avenue SW, Washington, DC 20375, USA. E-mail address: [email protected]
Vikas Khanna*, Department of Civil and Environmental Engineering, University of Pittsburgh, Benedum Hall, 3700 O’Hara Street, Pittsburgh, PA15261, USA. E-mail address: [email protected]
Laura Merugula and Bhavik R. Bakshi, William G. Lowrie Department of Chemical and Biomolecular Engineering, The Ohio State University, Koffolt Laboratories, 140 W, 19th Ave, Columbus, OH 43210, USA. E-mail address: [email protected]
Dr Yong Lin and , ProfessorChi-Ming Chan*, Department of Chemical and Biomolecular Engineering, The Hong Kong University of Science and Technology, Clear Water Bay, Hong Kong. E-mail address: [email protected]
Professor Dr José Ignacio Velasco*, University Professor, Centre Català del Plàstic, Departament de Ciència dels Materials i Enginyeria Metal-lúrgica, Universitat Politècnica de Catalunya, C/ Colom 114, E-08222 Terrassa, Barcelona, Spain. E-mail address: [email protected]
Dr Mónica Ardanuy, Assistant Professor, Centre Català del Plastic, Departament d’Enginyeria Textil i Paperera, Universitat Politècnica de Catalunya, C/ Colom 11, E-08222 Terrassa, Barcelona, Spain. E-mail address: [email protected]
Dr Marcelo Antunes, Assistant Professor, Centre Català del Plàstic, Departament de Ciència dels Materials i Enginyeria Metal-lúrgica, Universitat Politècnica de Catalunya, C/ Colom 114, E-08222 Terrassa, Barcelona, Spain. E-mail address: [email protected]
Elaine C. Ramires, Instituto de Quimica de São Carlos (IQSC), Universidade de São Paulo (USP), C.P. 780, 13560–970 São Carlos, Brazil
Alain Dufresne*, The International School of Paper, Print Media and Biomaterials – Pagora, Grenoble Institute of Technology, BP 65, 38402 Saint Martin d’Hères Cedex, France. E-mail address: [email protected]
Dr Greg Heness, Senior Lecturer in Materials Science & Engineering, School of Physics and Advanced Materials and the Institute of Nanoscale Technology, University of Technology, Sydney, PO Box 123, Broadway, NSW, 2007, Australia. E-mail address: [email protected]
Tapas Kuila* and Joong Hee Lee, Department of BIN Fusion Technology, Chonbuk National University, Jeonju, Jeonbuk, 561-756, Republic of Korea. E-mail address: [email protected]
Professor Marianne Gilbert, Department of Materials, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK. E-mail address: [email protected]
Szu-Hui Lim, Singapore Institute of Manufacturing Technology (Simtech), 71 Nanyang Drive, 638075 Singapore
Aravind Dasari*, School of Materials Science & Engineering, Blk. N4.1, 50 Nanyang Avenue, Nanyang Technological University (NTU), Singapore 639798. E-mail address: [email protected]
Aravind Dasari, Madrid Institute for Advanced Studies of Materials (IMDEA Materials Institute), C/ Profesor Aranguren s/n, 28040 Madrid, Spain. E-mail address: [email protected]
Jayita Bandyopadhyay, DST/CSIR Nanotechnology Innovation Centre, National Centre for Nanostructured Materials, Council for Scientific and Industrial Research, Pretoria 0001, Republic of South Africa
Suprakas Sinha Ray*[email protected]
DST/CSIR Nanotechnology Innovation Centre, National Centre for Nanostructured Materials, Council for Scientific and Industrial Research, Pretoria 0001, Republic of South Africa
Department of Chemical Technology, University of Johannesburg, Doornfontein 2018, Johannesburg, Republic of South Africa
Professor D.J. Martin*, Group Leader, The Australian Institute for Bioengineering and Nanotechnology (AIBN), Professor, School of Chemical Engineering, Building 75, Cr College and Cooper Rd, University of Queensland, Brisbane, 4072, Australia. E-mail address: [email protected]
A.F. Osman and Y. Andriani, The Australian Institute for Bioengineering and Nanotechnology (AIBN), Building 75, Cr College and Cooper Rd, University of Queensland, Brisbane, 4072, Australia
Dr G.A. Edwards, The Australian Institute for Bioengineering and Nanotechnology (AIBN), Building 75, Cr College and Cooper Rd, University of Queensland, Brisbane, 4072, Australia
Dr Kazutoshi Haraguchi, Material Chemistry Laboratory, Kawamura Institute of Chemical Research, 631 Sakado, Sakura, Chiba 285-0078, Japan. E-mail address: [email protected]
Dr Andy McLauchlin*, Exeter Advanced Technologies, University of Exeter, North Park Road, Exeter, Devon, EX4 4QF, UK. E-mail address: [email protected]
Dr Noreen Thomas, Department of Materials, Loughborough University, Loughborough, Leicestershire, LE11 3 TU, UK. E-mail address: [email protected]
Professor Hee-Woo Rhee* and Lee-Jin Ghil, Department of Chemical and Biomolecular Engineering, Sogang University, 1 Shinsu-dong, Mapo-Gu, Seoul 121-742, South Korea. E-mail address: [email protected]
James Njuguna*[email protected], Krzysztof Pielichowski and Jiying Fan
Cranfield University, Bedfordshire, MK43 0AL, UK
Cracow University of Technology, ul., Warszawska 24, 31-155 Kraków, Poland
José-Marie Lopez-Cuesta, Centre des Matériaux (CMGD), Ecole des Mines d’Alès, 6 Avenue de Clavières, 30319 Alès Cedex, France. E-mail address: [email protected]
Dr Dorothée Vinga Szabó*, Karlsruhe Institute of Technology, Institute for Applied Materials – Material Process Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany. E-mail address: [email protected]
Professor Dr Thomas Hanemann[email protected]
Karlsruhe Institute of Technology, Institute for Applied Materials – Material Process Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
Albert-Ludwigs-University of Freiburg, Department of Microsystems Engineering, Georges-Koehler-Allee 102, 79110 Freiburg, Germany
Tsao-Cheng Huang and Jui-Ming Yeh*, Department of Chemistry and Center for Nanotechnology, Chung Yuan Christian University, Taiwan. E-mail address: [email protected]