ESD Association

ANSI/ESD S1.1-2006. Wrist Straps.

ESD DSTM 2.1. Garments.

ANSI/ESD STM 3.1-2006. Ionization.

ANSI/ESD SP3.3-2006. Periodic Verification of Air Ionizers.

ANSI/ESD STM 4.1-2006. Worksurfaces—Resistance Measurements.

ANSI/ESD STM 3.1-2006. ESD Protective Worksurfaces—Charge Dissipation Characteristics.

ANSI/ESD STM 5.1-2007. Electrostatic Discharge Sensitivity Testing—Human Body Model (HBM) Component Level.

ANSI/ESD STM 5.1.1-2006. Human Body Model (HBM) and Machine Model (MM) Alternative Test Method: Supply Pin Ganging—Component Level.

ANSI/ESD STM 5.1.2-2006. Human Body Model (HBM) and Machine Model (MM) Alternative Test Method: Split Signal Pin—Component Level.

ANSI/ESD S5.2-2006. Electrostatic Discharge Sensitivity Testing—Machine Model (MM) Component Level.

ANSI/ESD S5.3.1-2009. Charged Device Model (CDM)—Component Level.

ANSI/ESD SP5.3.2-2008. Electrostatic Discharge Sensitivity Testing—Socketed Device Model (SDM) Component Level.

ANSI/ESD STM 5.5.1-2008. Electrostatic Discharge Sensitivity Testing—Transmission Line Pulse (TLP) Component Level.

ANSI/ESD SP5.5.2-2007. Electrostatic Discharge Sensitivity Testing—Very Fast Transmission Line Pulse (VF-TLP) Component Level.

ANSI/ESD SP6.1-2009. Grounding.

ANSI/ESD S7.1-2005. Resistive Characterization of Materials—Floor Materials.

ANSI/ESD S8.1-2007. Symbols—ESD Awareness.

ANSI/ESD STM 9.1-2006. Footwear—Resistive Characterization.

ESD SP9.2-2003. Footwear—Foot Grounders Resistive Characterization.

ANSI/ESD SP10.1-2007. Automatic Handling Equipment (AHE).

ANSI/ESD STM 11.11-2006. Surface Resistance Measurement of Static Dissipative Planar Materials.

ESD DSTM 11.13-2009. Two Point Resistance Measurement.

ANSI/ESD STM 11.31-2006. Bags.

ANSI/ESD STM 12.1-2006. Seating—Resistive Measurements.

ESD STM 13.1-2000. Electrical Soldering/Desoldering Hand Tools.

ANSI/ESD SP14.1. System Level Electrostatic Discharge (ESD) Simulator Verification.

ESD SP14.3-2009. System Level Electrostatic Discharge (ESD) Measurement of Cable Discharge Current.

ANSI/ESD SP15.1-2005. In Use Resistance Testing of Gloves and Finger Cots.

ANSI/ESD S20.20-2007. Protection of Electrical and Electronic Parts, Assemblies, and Equipment.

ANSI/ESD STM 97.1-2006. Floor Materials and Footwear—Resistance Measurements in Combination with A Person.

ESD Association. DSP 14.1-2003. ESD Association Standard Practice for the Protection of Electrostatic Discharge Sensitive Items—System Level Electrostatic Discharge Simulator Verification Standard Practice. Standard Practice (SP) document, 2003.

ESD Association. DSP 14.3-2006. ESD Association Standard Practice for the Protection of Electrostatic Discharge Sensitive Items—System Level Cable Discharge Measurements Standard Practice. Standard Practice (SP) document, 2006.

ESD Association. DSP 14.4-2007. ESD Association Standard Practice for the Protection of Electrostatic Discharge Sensitive Items—System Level Cable Discharge Test Standard Practice. Standard Practice (SP) document, 2007.

JEDEC

EIA JESD78. IC Latchup Test, JEDEC Organization, 2010.

International Electro-technical Commission (IEC)

IEC 61000-4-2. Electromagnetic compatibility (EMC): Testing and measurement techniques—Electrostatic discharge immunity test, IEC International Standard, 2001.

IEC 61000-4-2. Electromagnetic compatibility (EMC)—Part 4-2: Testing and measurement techniques—Electrostatic discharge immunity test, IEC International Standard, 2008.

IEC 61000-4-5. Electromagnetic compatibility (EMC)—Part 4-5: Testing and measurement techniques—Surge immunity test, IEC International Standard, 2000.

IEEE

IEEE Standard C62.45-1991. IEEE Guide on Surge Testing for Equipment Connected to Low-Voltage AC Power Circuit, 1992.

Department of Defense (DOD)

DOD-HDBK-263. Electrostatic Discharge Control Handbook for Protection of Electrical and Electronic Parts, Assemblies and Equipment.

DOD-STD-1686. Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment.

DOD-STD-2000-2A. Part and Component Mounting for High Quality/High Reliability Soldered Electrical and Electronic Assembly.

Military Standards

MIL-STD-454. Standard General Requirements for Electronic Equipment.

MIL-STD-461E. Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment, August 20, 1999.

MIL-STD-785. Reliability Program for System and Equipment Development and Production.

MIL-STD-883. Method 3015-4—Electrostatic Discharge Sensitivity Classification.

MIL-STD-1686A. Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment.

MIL-E-17555. Electronic and Electrical Equipment, Accessories, and Provisioned Items (Repair Parts: Packaging of).

MIL-D-81997. Pouches, Cushioned, Flexible, Electrostatic Free, Reclosable, Transparent.

MIL-D-82646. Plastic Film, Conductive, Heat Sealable, Flexible.

MIL-D-82647. Bags, Pouches, Conductive, Plastic, Heat Sealable, Flexible.

IEC 801-2. Electromagnetic Compatibility for Industrial Process Measurements and Control Equipment, Part 2: Electrostatic Discharge (ESD) Requirements.

EIA-541. Packaging Material Standards for ESD Sensitive Materials.

JEDEC 108. Distributor Requirements for Handling Electrostatic Discharge Sensitive (ESDS) Devices.

SAE

SAE J551. Performance Levels and Methods of Measurement of Electromagnetic Compatibility of Vehicles and Devices (60 Hz to 18 GHz), Society of Automotive Engineers, June 1996.

SAE J1113. Electromagnetic Compatibility Measurement Procedure for Vehicle Component (Except Aircraft) (60 Hz to 18 GHz), Society of Automotive Engineers, June 1995.