On the Zoning page, configure the zoning information only if the storage is directly connected with the FIs (an option for small environments). In most environments, storage is not directly connected to the FIs and is either connected through MDS or Brocade switches, in which case zoning is configured on the storage fabric. Proceed with zoning configuration on the FI only if storage is locally connected. The page shows vHBAs (initiators) on the left-hand side of the pane and zones (initiator groups) information on the right-hand side of the pane. Select each vHBA (initiator), and add it to an existing zone vHBA initiator group by clicking on the >>Add To >> sign: