Part IV: Joining and assembly of biomaterial and tissue implants
by M Breyen, Y Zhou
Joining and Assembly of Medical Materials and Devices
- Cover image
- Title page
- Table of Contents
- Copyright
- Contributor contact details
- Woodhead Publishing Series in Biomaterials
- Part I: Fundamentals of joining and assembly in medical materials and devices
- Part II: Joining and assembly of medical metals
- Chapter 5: Micro-welding of shape-memory alloys
- Chapter 6: Joining of platinum (Pt) alloy wires to stainless steel wires for electronic medical devices
- Chapter 7: Evaluating the corrosion performance of metal medical device welds
- Abstract:
- 7.1 Introduction
- 7.2 Measurements of corrosion
- 7.3 Direct measurements of corrosion current
- 7.4 Considerations when gathering corrosion data
- 7.5 Test sample preparation
- 7.6 Instrumentation and equipment
- 7.7 Interpretation of data
- 7.8 Mitigations for weld corrosion
- 7.9 Future trends
- 7.10 Sources of further information
- Chapter 8: Laser hermetic welding of implantable medical devices
- Chapter 9: Validating hermeticity in welded metallic implantable medical devices
- Part III: Joining and assembly of medical plastics
- Chapter 10: Overview of welding methods for medical plastics
- Abstract:
- 10.1 Introduction
- 10.2 Fundamental processes of plastics welding
- 10.3 Medical plastics and weldability
- 10.4 Part and Joint Design
- 10.5 Processes with external heating
- 10.6 Processes with internal heating
- 10.7 Processes with implant welding
- 10.8 Potential impacts from other manufacturing processes
- 10.9 Special applications for welding of medical plastics
- Chapter 11: Ultrasonic welding of medical plastics
- Abstract:
- 11.1 Introduction
- 11.2 Ultrasonic-welding processes fundamentals
- 11.3 Ultrasonic-welding process parameters and control
- 11.4 Weldability
- 11.5 Horn design
- 11.6 Part and joint design
- 11.7 Process optimization
- 11.8 Other specific applications
- 11.9 Troubleshooting
- 11.10 Advantages and limitations
- Chapter 12: Radio frequency (RF)/dielectric welding of medical plastics
- Abstract:
- 12.1 Introduction
- 12.2 Dielectric heating fundamentals
- 12.3 Dielectric welding/sealing process description and process parameters
- 12.4 Key factors affecting the sealing process and seal quality
- 12.5 Weldability
- 12.6 Testing approaches for seals and the dielectric sealing process
- 12.7 RF welding process advantages, limitations and future trends
- Chapter 13: Transmission laser welding strategies for medical plastics
- Chapter 14: Bonding strategies and adhesives for joining medical device components
- Chapter 10: Overview of welding methods for medical plastics
- Part IV: Joining and assembly of biomaterial and tissue implants
- Chapter 15: Advanced metal–ceramic joining techniques for orthopaedic applications
- Chapter 16: Tissue adhesives and sealants for surgical applications
- Abstract:
- 16.1 Introduction
- 16.2 Principles of tissue adhesives and sealants
- 16.3 Definitions and general considerations
- 16.4 Mechanisms of bonding
- 16.5 Application methods
- 16.6 Synthetic bioresorbable sealants
- 16.7 Commercial resorbable synthetic sealants and adhesives
- 16.8 Commercial resorbable bio-derived sealants and adhesives
- 16.9 Commercial biostable bio-derived sealants and adhesives
- 16.10 Commercial biostable synthetic sealants and adhesives
- 16.11 Conclusion
- Chapter 17: Antibacterial adhesives for bone and tooth repair
- Chapter 18: Testing bond strength: the case of dental biomaterials
- Index
Next
Next Chapter
Chapter 15: Advanced metal–ceramic joining techniques for orthopaedic applications
Part IV
Joining and assembly of biomaterial and tissue implants
-
No Comment
..................Content has been hidden....................
You can't read the all page of ebook, please click here login for view all page.