1. Navigate to Diagnostics | Traceroute.

2. In the Hostname text field, enter the hostname or IP address of the destination:

3. In the IP Protocol drop-down menu, select IPv4 or IPv6.
4. In the Source Address drop-down menu, select the interface that will be the source IP address of the traceroute operation (or leave it set to Any).
5. In the Maximum number of hops drop-down menu, select the maximum number of hops to trace (1 to 64).
6. Check the Reverse Address Lookup checkbox if you want traceroute to perform a reverse DNS lookup on each hop (this will slow down the process considerably).
7. Check the Use ICMP checkbox to make traceroute use ICMP as the protocol, instead of UDP.
8. Click on the Traceroute button.
9. The output should be displayed as follows: