The following steps detail how to configure a universal logical router:

1. Log into the vSphere web client.
2. Navigate to Networking & Security | NSX Edges.
3. Ensure the NSX Manager selected is Primary | 192.168.110.42.
4. Click Add.
5. Select Universal Logical (Distributed) Router, configure the names, and select Deploy Edge Appliance, as shown in the following screenshot, and then click Next:

6. Configure the Settings options as follows and click Next:

• User Name: admin
• Password: VMware1!VMware1!
• Select Enable SSH access

7. Click Add on NSX Edge Appliances.
8. Select Cluster/Resource Pool and Datastore, as shown in the following screenshot and click OK:

9. Review the deployment parameters and click Next:

10. In the Configure interfaces of this NSX Edge pane, click Add.
11. For the Name field, type Web-Logical-Switch, select Internal for Interface Type, and click Change on the Connected To row.

12. Select Universal-Web-Logical-Switch and click OK:

13. Type the Primary IP Address as 172.16.10.1 and Subnet Prefix Length as 24 and click OK:

14. Repeat steps 10 through 13 for the Universal-App-Logical-Switch and the Universal-DB-Logical-Switch with the following options:

15. Select HA Interface Configuration, select the Universal-UDLR-HA, and click OK:
16. Review the configuration and click Next:

17. Configure Default gateway settings, select vNIC Transit-Logical-Switch with the Gateway IP of 192.168.250.2, and leave all other settings to their default values. Click Next:

18. Review the configuration and click Finish to start the deployment: