PSpice Measurement Definitions
| Bandwidth | Bandwidth of a waveform (you choose dB level) |
| Bandwidth_Bandpass_3dB | Bandwidth (3 dB level) of a waveform |
| Bandwidth_Bandpass_3dB_XRange | Bandwidth (3 dB level) of a waveform over a specified X-range |
| CenterFrequency | Center frequency (dB level) of a waveform |
| CenterFrequency_XRange | Center frequency (dB level) of a waveform over a specified X-range |
| ConversionGain | Ratio of the maximum value of the first waveform to the maximum value of the second waveform |
| ConversionGain_XRange | Ratio of the maximum value of the first waveform to the maximum value of the second waveform over a specified X-range |
| Cutoff_Highpass_3dB | High-pass bandwidth (for the given dB level) |
| Cutoff_Highpass_3dB_XRange | High-pass bandwidth (for the given dB level) |
| Cutoff_Lowpass_3dB | Low-pass bandwidth (for the given dB level) |
| Cutoff_Lowpass_3dB_XRange | Low-pass bandwidth (for the given dB level) over a specified range |
| DutyCycle | Duty cycle of the first pulse/period |
| DutyCycle_XRange | Duty cycle of the first pulse/period over a range |
| Falltime_NoOvershoot | Fall time with no overshoot |
| Falltime_StepResponse | Fall time of a negative-going step response curve |
| Falltime_StepResponse_XRange | Fall time of a negative-going step response curve over a specified range |
| GainMargin | Gain (dB level) at the first 180-degree out-of-phase mark |
| Max | Maximum value of the waveform |
| Max_XRange | Maximum value of the waveform within the specified range of X |
| Min | Minimum value of the waveform |
| Min_XRange | Minimum value of the waveform within the specified range of X |
| NthPeak | Value of a waveform at its nth peak |
| Overshoot | Overshoot of a step response curve |
| Overshoot_XRange | Overshoot of a step response curve over a specified range |
| Peak | Value of a waveform at its nth peak |
| Period | Period of a time domain signal |
| Period_XRange | Period of a time domain signal over a specified range |
| PhaseMargin | Phase margin |
| PowerDissipation_mW | Total power dissipation in milliwatts during the final period of time (can be used to calculate total power dissipation, if the first waveform is the integral of V(load) |
| Pulsewidth | Width of the first pulse |
| Pulsewidth_XRange | Width of the first pulse at a specified range |
| Q_Bandpass | Calculates Q (center frequency/bandwidth) of a bandpass response at the specified dB point |
| Q_Bandpass_XRange | Calculates Q (center frequency/bandwidth) of a bandpass response at the specified dB point and the specified range |
| Risetime_NoOvershoot | Rise time of a step response curve with no overshoot |
| Risetime_Step | Response rise time of a step response curve |
| Risetime_StepResponse_XRange | Rise time of a step response curve at a specified range |
| SettlingTime | Time from <begin_x> to the time it takes a step response to settle within a specified band |
| SettlingTime_XRange | Time from <begin_x> to the time it takes a step response to settle within a specified band and within a specified range |
| SlewRate_Fall | Slew rate of a negative-going step response curve |
| SlewRate_Fall_XRange | Slew rate of a negative-going step response curve over an X-range |
| SlewRate_Rise | Slew rate of a positive-going step response curve |
| SlewRate_Rise_XRange | Slew rate of a positive-going step response curve over an X-range |
| Swing_XRange | Difference between the maximum and minimum values of the waveform within the specified range |
| XatNthY | Value of X corresponding to the nth occurrence of the given Y-value, for the specified waveform |
| XatNthY_NegativeSlope | Value of X corresponding to the nth negative slope crossing of the given Y-value, for the specified waveform |
| XatNthY_PercentYRange | Value of X corresponding to the nth occurrence of the waveform crossing the given percentage of its full Y-axis range; specifically, nth occurrence of Y=Ymin+(Ymax-Ymin)∗Y_pct/100 |
| XatNthY_Positive | Slope value of X corresponding to the nth positive slope crossing of the given Y-value, for the specified waveform |
| YatFirstX | Value of the waveform at the beginning of the X-value range |
| YatLastX | Value of the waveform at the end of the X-value range |
| YatX | Value of the waveform at the given X-value |
| YatX_PercentXRange | Value of the waveform at the given percentage of the X-axis range |
| ZeroCross | X-value where the Y-value first crosses zero |
| ZeroCross_XRange | X-value where the Y-value first crosses zero at the specified range |
..................Content has been hidden....................
You can't read the all page of ebook, please click here login for view all page.