Installing an AirPort Extreme Card

All iMac G5 models are AirPort Extreme–ready. You may install only the AirPort Extreme Card in the iMac G5; older AirPort Cards do not work in this computer.

The following installation process is extremely simple. It assumes you have already removed the iMac computer's back cover and grounded yourself following the steps on the previous pages.

1.
Remove the AirPort Extreme Card from its packaging.

2.
Slide the AirPort Extreme Card into the AirPort Card guide channel, label-side down and bar code facing up, until it clicks into place.

Do not force the card; it should slide in easily.

3.
Connect the antenna cable to the end of the installed AirPort Extreme Card.

4.
Make sure the AirPort Extreme Card is flush with the plastic AirPort Card guide.

5.
Replace the back cover and restart the computer.

6.
After logging in, double-click System Profiler (/Applications/Utilities) and click AirPort Card in the hardware contents list.

If you have installed the AirPort Extreme Card successfully, System Profiler will display information about the card.

..................Content has been hidden....................

You can't read the all page of ebook, please click here login for view all page.
Reset
18.117.183.252