Chapter Test
NOTE
All chapter tests are available as PDF files on the companion CD so that you can mark up your own printed copies instead of writing in this book.
Using the Power Mac G5 Service Manual (powermac_g5_late2004.pdf) provided on this book's companion CD, answer the following questions:
| 1. | You need to replace the processor in a Power Mac G5 (late 2004) system. What tools do you need to do this? |
| 2. | Why do you need to use a long Phillips or a long 2.5 mm hex driver on the Power Mac G5 heatsink? |
| 3. | To remove the locking rivet in the heatsink cover of a Power Mac G5 (late 2004), what two tools are required? |
Using the iBook G4 Service Manual (ibg4_12_late04.pdf) provided on this book's companion CD, answer the following questions:
| 4. | You are replacing the optical drive on a 12-inch iBook G4. What size Phillips screwdriver is required? |
| 5. | You need to replace the foot and socket on a 12-inch iBook G4. What tools are required to do this? |
Chapter Test Answer Key
| 1. | Long-handled Phillips screwdriver or long-handled 2.5 mm hex driver, and a stubby Phillips screwdriver |
| 2. | The heatsink does not allow clearance for a shorter screwdriver. Some models require a Phillips screwdriver, some require a 2.5 mm hex driver. |
| 3. | X-Acto knife and a cup hook. You may also want to use a small wooden stick to leverage the cup hook. |
| 4. | Phillips #0 screwdriver |
| 5. | Soft cloth, needlenose pliers, and jeweler's Phillips #0 screwdriver |
..................Content has been hidden....................
You can't read the all page of ebook, please click here login for view all page.