Access lets you trap some errors that can occur during program execution. By using the error-trapping commands mentioned in Chapter 7, “Handling Your Errors in Access with VBA,” you can anticipate errors and handle them accordingly.
The following table lists both Access 2000 application/VBA errors (3-481) and Jet 4 errors (3000-3671). The error numbers can potentially go up to 32,767.
To create the data in the upcoming table, the code in Listing C.1 was used.
A few items to note:
Some Jet errors use the | symbol, which is a placeholder for variables passed to the errors. An example of this is error number 3006, Database '|' is exclusively locked., in which the pipe would be replaced with the name of the database exclusively locked.
User-defined errors are best created by using error numbers 30,000 and above. By starting at 30,000, you have a smaller chance of Access expanding its own errors up that far.
Errors in which the message is a * are special errors that Access handles in different ways.
Errors that don't appear here are either application-defined or object-defined errors, or are reserved for future use in new versions of Access or with the Jet engine.
Error Number | Error Message |
---|---|
5 | Invalid procedure call or argument |
6 | Overflow |
7 | Out of memory |
9 | Subscript out of range |
10 | This array is fixed or temporarily locked |
11 | Division by zero |
13 | Type mismatch |
14 | Out of string space |
16 | Expression too complex |
17 | Can't perform requested operation |
18 | User interrupt occurred |
28 | Out of stack space |
47 | Too many DLL application clients |
48 | Error in loading DLL |
49 | Bad DLL calling convention |
51 | Internal error |
52 | Bad file name or number |
53 | File not found |
54 | Bad file mode |
55 | File already open |
57 | Device I/O error |
58 | File already exists |
59 | Bad record length |
61 | Disk full |
62 | Input past end of file |
63 | Bad record number |
67 | Too many files |
68 | Device unavailable |
70 | Permission denied |
71 | Disk not ready |
74 | Can't rename with different drive |
75 | Path/File access error |
76 | Path not found |
93 | Invalid pattern string |
96 | Unable to sink events of object because the object is already firing events to the maximum number of event receivers that it supports |
97 | Can not call friend function on object which is not an instance of defining class |
98 | A property or method call cannot include a reference to a private object, either as an argument or as a return value |
321 | Invalid file format |
322 | Can't create necessary temporary file |
325 | Invalid format in resource file |
380 | Invalid property value |
381 | Invalid property array index |
382 | Set not supported at runtime |
383 | Set not supported (read-only property) |
385 | Need property array index |
387 | Set not permitted |
393 | Get not supported at runtime |
394 | Get not supported (write-only property) |
422 | Property not found |
423 | Property or method not found |
424 | Object required |
429 | ActiveX component can't create object |
430 | Class does not support Automation or does not support expected interface |
432 | File name or class name not found during Automation operation |
438 | Object doesn't support this property or method |
440 | Automation error |
442 | Connection to type library or object library for remote process has been lost. Press OK for dialog to remove reference. |
443 | Automation object does not have a default value |
445 | Object doesn't support this action |
446 | Object doesn't support named arguments |
447 | Object doesn't support current locale setting |
448 | Named argument not found |
449 | Argument not optional |
450 | Wrong number of arguments or invalid property assignment |
451 | Property let procedure not defined and property get procedure did not return an object |
452 | Invalid ordinal |
453 | Specified DLL function not found |
454 | Code resource not found |
455 | Code resource lock error |
457 | This key is already associated with an element of this collection |
458 | Variable uses an Automation type not supported in Visual Basic |
459 | Object or class does not support the set of events |
460 | Invalid clipboard format |
461 | Method or data member not found |
462 | The remote server machine does not exist or is unavailable |
463 | Class not registered on local machine |
481 | Invalid picture |
482 | Printer error |
735 | Can't save file to TEMP |
744 | Search text not found |
746 | Replacements too long |
2001 | You canceled the previous operation.@@@1@5738@1 |
2002 | You tried to perform an operation involving a function or feature that was not installed in this version of Microsoft Access.@@@1@@1 |
2004 | There isn't enough memory to perform this operation. Close unneeded programs and try the operation again. |
2005 | “There isn't enough free memory to start Microsoft Access.@Close unneeded programs and try again. For information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@3” |
2006 | The object name '|' you entered doesn't follow Microsoft Access object-naming rules.@For more information about naming objects, click Help.@@2@611734@1 |
2007 | “You already have an open database object named '|.'@Use a different name for each database object of the same type.
If you want this object to replace the original object, close the original object, and then save this object using the same name. For more information on renaming a database object, click Help.@@2@209043@1” |
2008 | You can't delete the database object '|' while it's open.@Close the database object, and then delete it.@@1@@1 |
2009 | You can't rename the database object '|' while it's open.@Close the database object, and then rename it.@@1@@1 |
2010 | You can't delete the database object '|' while it's open.@Close the database object, and then delete it.@@1@@1 |
2011 | The password you entered is incorrect. |
2014 | You have given this |1 the same name as an existing |2 in your database.@You can't give a table and a query the same name.@Give this object a name that isn't already used by another table or query.@1@@1 |
2015 | “There are no registered wizards of this type.@Rerun Microsoft Access or Microsoft Office Setup to reinstall the wizards. If you want to preserve your security or custom settings, back up the Microsoft Access workgroup information file. For more information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@@1@@1” |
2016 | You can't modify the attributes of System Tables. |
2017 | This Visual Basic for Applications Project has been protected with a password. You must supply the password in the Visual Basic Editor before you can perform this operation.@@@1@@1 |
2018 | The data access page name '|' you entered is misspelled or refers to a data access page that isn't open or doesn't exist.@@@1@@1 |
2019 | The number you used to refer to the data access page is invalid.@Use the Count property to count the open data access page and make sure that the page number is not greater than the number of open data access pages minus one.@@1@2019460@1 |
2020 | The data access page theme name '|' you entered is misspelled or refers to a theme name that doesn't exist.@@@1@@1 |
2021 | One or more operators in the filter expression is invalid.@For a valid list of operators refer to the help file@@1@@1 |
2022 | You entered an expression that requires a data access page to be the active window.@@@1@5601@1 |
2023 | The file name you specified for the data access page already exists.@@@1@5601@1 |
2024 | The report snapshot was not created because you don't have enough free disk space for temporary work files.@To fix this, free up disk space (for example, empty the Recycle Bin or delete unnecessary files).@@1@@1 |
2025 | The ADP file is not in the correct format for a Microsoft Access project.@@@1@@1 |
2026 | Your computer is missing at least one of the Microsoft Access 97 object libraries. Your converted database will not work until you open this database using Access 97 and then fix any missing references. @Press OK to continue saving this database in the Access 97 format with missing references, or press Cancel if you no longer wish to save this database.@@4@@2 |
2027 | This operation is not supported for Microsoft Access 1.X databases.@@@1@@1 |
2028 | Microsoft Access was unable to close the database object. |
2029 | Microsoft Office applications cannot suspend while you have documents open from a network location. Exit the applications or close the open documents and try again. |
2030 | The database '|' will be opened read-only because one of the following occurred:@the file is locked for editing by another user, or the file (or the folder in which it is located,) is marked as read-only, or you specified that you wanted to open this file read-only@@1@@1 |
2031 | You can't convert or enable an MDE file.@@@1@@1 |
2032 | Some errors happened during the conversion. No converted database is generated.@@@1@@1 |
2033 | Name conflicts with existing module, project, or object library.@@@1@@1 |
2034 | Cannot Compile Project.@@@1@@1 |
2035 | Cannot Load Project of wrong version.@@@1@@1 |
2036 | Microsoft Access does not support using ADP Projects when running in Runtime Mode.@@@1@@1 |
2037 | Microsoft Access could not perform name AutoCorrect during this operation. The 'Log name AutoCorrect' option is set, but the Data and Misc. Objects is not checked out.@@@1@@3 |
2038 | The file '|' cannot be opened because it has been locked by another user |
2039 | You cannot convert a workgroup file from Microsoft Access2000 to Access 97. You must create new security settings in Access 97. |
2040 | Microsoft Access can't run.@@@1@@3 |
2041 | Microsoft Access couldn't find file '|'. This file is required for startup. |
2042 | A system error occurred, or there isn't enough free memory to start Microsoft Access. Close unneeded programs and try again. |
2043 | Microsoft Access can't find the database file '|.'@Make sure you entered the correct path and file name.@@1@@1 |
2044 | You can't exit Microsoft Access now.@If you're running a Visual Basic module that is using OLE or DDE, you may need to interrupt the module.@@1@@1 |
2045 | The command line you used to start Microsoft Access contains an option that Microsoft Access doesn't recognize.@Exit and restart Microsoft Access using valid command-line options.@@2@510252@1 |
2046 | “The command or action '|' isn't available now.@* You may be in a read-only database or an unconverted database from an earlier version of Microsoft Access. * The type of object the action applies to isn't currently selected or isn't in the active view. @Use only those commands and macro actions that are currently available for this database.@1@@1” |
2047 | Microsoft Access can't run.@@@1@@3 |
2048 | “There isn't enough free memory to open the file '|.'@Close unneeded programs and try again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@1” |
2049 | The Tahoma font is not present. To restore it, please run Detect and Repair from the Help menu. |
2050 | Enter an OLE/DDE Timeout setting from 0 through 300 seconds.@@@1@@1 |
2051 | The object name '|' can't be longer than 64 characters according to Microsoft Access object-naming rules.@@@1@@1 |
2052 | There isn't enough free memory to update the display. Close unneeded programs and try again. |
2053 | The command name can't be blank.@Please choose a name.@@1@@1 |
2054 | Microsoft Access is unable to load the Visual Basic for Applications dynamic-link library (DLL) Vbe6.@Rerun the Microsoft Access Setup program.@@1@@3 |
2055 | The expression '|' you entered is invalid.@@@1@311732@1 |
2056 | Microsoft Access can't supply context-sensitive Help.@@@1@@1 |
2057 | There isn't enough stack memory left to perform the operation.@The operation is too complicated. Try simplifying the operation.@@1@@3 |
2058 | “The file '|' is incompatible. Microsoft Access needs to be reinstalled.@Run Setup to reinstall Microsoft Access. If you want to preserve your security or custom settings, back up the Microsoft Access workgroup information file. For more information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@@1@@3” |
2059 | Microsoft Access cannot find the object '|'.@Make sure the object exists and that you spell its name correctly.@@1@@1 |
2060 | You can't create a field list based on the action query '|.'@Action queries don't have fields. A form or report must be based on a table, or on a select or crosstab query.@Change the RecordSource property for the form or report, or open the action query and change it to a select query.@1@209232@1 |
2061 | Enter a zero or greater-than-zero number for this option.@@@1@@1 |
2062 | The command name must be shorter than 255 Characters.@Please choose a name.@@1@@1 |
2063 | Microsoft Access can't create, open, or write to the index file '|'; the information (.inf) file it uses to keep track of dBASE indexes.@The index file may be damaged, or you may not have read/write permission for the network drive you're trying to link to.@You can link to the dBASE file without specifying any dBASE indexes, but the existing indexes will not be used with the linked table.@1@@1 |
2064 | The menu bar value '|' is invalid.@You supplied an argument to the DoMenuItem method that refers to a menu bar that is invalid.@Use an intrinsic constant or numeric value that refers to a valid menu bar value, such as acFormbar.@1@611895@1 |
2065 | The name for the menu, command, or subcommand you entered is invalid.@You supplied an argument to the DoMenuItem method that refers to a menu name, command, or subcommand that is invalid.@Use an intrinsic constant or numeric value that refers to a valid menu, command, or subcommand value, such as acRecordsMenu.@1@611895@1 |
2066 | A video adapter resolution of at least 640 x 480 pixels is required to run Microsoft Access. |
2067 | “A menu bar macro can only be run if the menu bar macro name is the setting used by particular properties or options. @You tried to run a menu bar macro containing the AddMenu action.
Set one of the following properties or options to the name of the menu bar macro:
|
2068 | The selected item is customized and doesn't have context-sensitive Help.@For more information on creating custom Help for a form, report, or control, click Help.@@2@110930@1 |
2069 | “The key or key combination |1 in |2 has invalid syntax or is not allowed.@Use the SendKeys syntax to specify the key or key combinations. For the allowed key or key combinations, click Help.@@2@610144@1” |
2070 | You already assigned the key or key combination |1 in |2 to another macro.@Only the first key or key combination will be used.@@2@610144@1 |
2071 | The Docking property can't be set to '|1' at this time.@If you want to set the Docking property to '|2', move the toolbar from its current position and try again.@@1@@1 |
2072 | Successfully imported '|'. |
2073 | Successfully exported '|'. |
2074 | This operation is not supported within transactions.@@@1@@1 |
2075 | This operation requires an open database.@@@1@@1 |
2076 | Successfully linked '|'. |
2077 | This Recordset is not updatable |
2078 | “Help isn't available due to lack of memory or improper installation of Microsoft Windows or Microsoft Access.@For more information on troubleshooting a low memory problem, search the Microsoft Windows Help index for 'memory, troubleshooting'.@If you need to reinstall Microsoft Access, you may want to preserve your security or custom settings. To do so, back up the Microsoft Access workgroup information file. For more information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@1@@3” |
2079 | Form is read-only because the Unique Table property is not set. |
2080 | The toolbar or menu | already exists.@Do you want to replace the existing toolbar or menu?@@19@@2 |
2081 | The Create From Macro command only works when a macro is selected in the Database window.@@@1@@1 |
2082 | Only fields from the Unique Table can be edited. |
2083 | The database '|' is read-only.@You can't save changes made to data or object definitions in this database.@@1@@1 |
2084 | Field '|' is based on an expression and can't be edited |
2085 | The ODBC Refresh Interval setting must be from 1 through 32,766 seconds.@@@1@@1 |
2086 | Recordset requires a form to be updatable. |
2087 | “Microsoft Access can't display the Add-ins submenu.@The Add-ins submenu expression '|' you entered exceeds the 256-character limit.@Shorten the macroname or functionname expression in the Menu Add-ins key of the Windows Registry setting, and then restart Microsoft Access. For more information on customizing Microsoft Access settings in the Windows Registry, click Help.@2@109015@3” |
2088 | “Microsoft Access can't display the Add-ins submenu | because a setting you entered in the Windows Registry is missing a macro name or function name expression.@@Supply the missing expression in the Menu Add-ins key of the Windows Registry, and then restart Microsoft Access. For more information on customizing Microsoft Access settings in the Windows Registry, click Help.@2@109015@3” |
2089 | Microsoft Access can't display the same menu more than once in a menu bar.@@@1@603704@1 |
2090 | An action within the current global menu's macro group can't change the global menu bar.@Microsoft Access can't display the global menu bar because the macro called when you first set the global menu includes another action that tries to reset the global menu.@Check your menu bar macros, and make sure that you set the global menu bar only once.@1@@1 |
2091 | '|' is an invalid name.@@@1@@1 |
2092 | “The value you specified for the setting argument in the SetOption method isn't the correct type of Variant for this option.@You specified a string when Microsoft Access expected a number.@Check the Options dialog box (Tools menu) to see what type of data is required to set this particular option. For example, the setting for the Default Database Folder option must be a string. To see what type of Variant you passed to the SetOption method, use the VarType function. For more information, search the Help index for 'Variant data type' and 'VarType function'.@1@@1” |
2093 | The numeric value for the setting argument in the SetOption method doesn't correspond to any list box or option group settings in the Options dialog box.@Valid settings are 0 (the first item in the list) through | (the last item in the list).@@1@606210@1 |
2094 | “Microsoft Access can't find the toolbar '|.'@You tried to run a macro that includes a ShowToolbar action or a Visual Basic procedure that includes a ShowToolbar method.
|
2095 | Microsoft Access can't switch to |.@The Microsoft application you tried to open can't be found or hasn't been installed on your computer.@@1@@3 |
2096 | “Microsoft Access can't open the Microsoft Office application because it can't find the dynamic-link library Mstool32.@Run Setup to reinstall Microsoft Access. If you want to preserve your security or custom settings, back up the Microsoft Access workgroup information file. For more information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@@1@@3” |
2097 | The table you tried to create an import/export specification for was created in an earlier version of Microsoft Access.@Convert this database to the current version of Microsoft Access by using the Convert Database command (Tools menu, Database Utilities submenu).@@1@@1 |
2100 | The control or subform control is too large for this location.@The number you entered for the Left, Top, Height, or Width property is too large or is a negative number.@Reduce the size of the control or subform control, or enter a positive number.@1@@1 |
2101 | The setting you entered isn't valid for this property.@To see the valid settings for this property, search the Help index for the name of the property.@@1@@1 |
2102 | The form name '|' is misspelled or refers to a form that doesn't exist.@If the invalid form name is in a macro, an Action Failed dialog box will display the macro name and the macro's arguments after you click OK. Open the Macro window, and enter the correct form name.@@1@@1 |
2103 | The report name '|' you entered in either the property sheet or macro is misspelled or refers to a report that doesn't exist.@If the invalid report name is in a macro, an Action Failed dialog box will display the macro name and the macro's arguments after you click OK. Open the Macro window, and enter the correct report name.@@1@@1 |
2104 | “You entered the control name '|,' which is already in use.@You already have a control on the form with this name, or an existing control has its name mapped to this name for Visual Basic. Visual Basic maps spaces in control names to underscores. For example, My Control and My_Control are treated as duplicate names.@@1@611734@1” |
2105 | You can't go to the specified record.@You may be at the end of a recordset.@@1@@1 |
2106 | | errors occurred when you loaded the form or report.@You loaded a form or report that has controls or properties that Microsoft Access doesn't recognize and will ignore.@@1@@1 |
2107 | The value you entered doesn't meet the validation rule defined for the field or control.@To see the validation rule, click Design view, click the appropriate field, and then, if the property sheet isn't open, click the Properties button on the toolbar. Then click the Data tab.@To solve this problem, enter a value that meets the validation rule, or press ESC to undo your changes.@1@211730@1 |
2108 | You must save the field before you execute the GoToControl action, the GoToControl method, or the SetFocus method.@You tried to move the focus to another control using the SetFocus method, GoToControl action, or the GoToControl method.@Set the macro or method to the AfterUpdate property instead of the BeforeUpdate property so it saves the field before changing the focus.@1@606314@1 |
2109 | There is no field named '|' in the current record.@@@1@@1 |
2110 | “Microsoft Access can't move the focus to the control |.@* The control may be a type that can't receive the focus, such as a label.
|
2111 | “The changes you made can't be saved.@The save operation may have failed due to the temporary locking of the records by another user.
|
2112 | The item on the Clipboard can't be pasted into this control.@@@1@@1 |
2113 | The value you entered isn't valid for this field.@For example, you may have entered text in a numeric field or a number that is larger than the FieldSize setting permits.@@1@@1 |
2114 | Microsoft Access doesn't support the format of the file '|,' so it can't load the picture.@@@1@@1 |
2115 | “The macro or function set to the BeforeUpdate or ValidationRule property for this field is preventing Microsoft Access from saving the data in the field.@* If this is a macro, open the macro in the Macro window and remove the action that forces a save (for example, GoToControl).
|
2116 | The value in the field or record violates the validation rule for the record or field.@For example, you may have changed a validation rule without verifying whether the existing data matches the new validation rule.@Click Undo on the Edit menu to restore the previous value, or enter a new value that meets the validation rule for the field.@2@209121@1 |
2117 | Microsoft Access has canceled the Paste operation.@The text on the Clipboard is too long to paste into the form. For example, you may have pasted too much text into a label or entered too much text in the ColumnWidths property.@Paste smaller sections. For labels, you must paste fewer than 2,048 characters.@1@@1 |
2118 | “You must save the current field before you run the Requery action.@* If you are running a macro from the Database window, save the field first, and then run the macro.
|
2119 | The Requery action can't be used on the control '|.'@Certain controls, such as labels and rectangles, can't receive the focus; therefore, you can't apply a Requery action to them.@@1@603033@1 |
2120 | To create a form, report or data access page using this wizard, you must first select the table or | on which the form, report or data access page will be based.@@@1@@1 |
2121 | “Microsoft Access can't open the form '|.'@It contains data that Microsoft Access doesn't recognize. Re-create the form or, if you maintain backup copies of your database, retrieve a copy of the form.@@1@@1” |
2122 | You can't view a form as a continuous form if it contains a subform, an ActiveX control, or a bound chart.@Set the DefaultView property of the form to Single Form or Datasheet.@@1@@1 |
2123 | The control name you entered doesn't follow Microsoft Access object-naming rules.@@@2@611734@1 |
2124 | The form name you entered doesn't follow Microsoft Access object-naming rules.@@@2@611734@1 |
2125 | The setting for the FontSize property must be from 1 through 127.@@@1@612551@1 |
2126 | The setting for the ColumnCount property must be from 1 through 255.@@@1@600936@1 |
2127 | The setting for the BoundColumn property can't be greater than the setting for the ColumnCount property.@@@1@600839@1 |
2128 | Microsoft Access encountered errors while importing |1.@For more detailed error information, see the file '|2'.@@1@@1 |
2129 | The setting for the DefaultEditing property must be Allow Edits, Read Only, Data Entry, or Can't Add Records.@Enter 1, 2, 3, or 4 for the DefaultEditing property.@@1@@1 |
2130 | The settings for the GridX and GridY properties must be from 1 through 64.@@@1@@1 |
2131 | An expression can't be longer than 2,048 characters.@@@1@@1 |
2132 | The setting for the DecimalPlaces property must be from 0 through 15, or 255 for Auto (default).@@@1@@1 |
2133 | You can't place a form (or report) within itself.@Select or enter a different form or report to serve as the subform or subreport.@@1@@1 |
2134 | The setting for the Width property must be from 0 through 22 inches (55.87 cm).@@@1@@1 |
2135 | This property is read-only and can't be set.@@@1@@1 |
2136 | To set this property, open the form or report in Design view.@For more information on this property, search the Help index for the name of the property.@@1@@1 |
2137 | “You can't use Find or Replace now.@The fields are not searchable due to one of the following:
|
2138 | You can't search the field for the specified value.@Resolve the error given in the previous error message before you attempt to search again.@@1@@1 |
2139 | You can't replace the current value of the field with the replacement text.@Resolve any errors before making further replacements.@@1@@1 |
2140 | Microsoft Access can't save the change you made to the record in the Replace operation for the reason given in the previous error message.@Click Undo Current Record on the Edit menu, or enter a new value in the field.@@1@@1 |
2141 | Microsoft Access can't find the text you specified in the Find What box.@@@1@@1 |
2142 | The FindRecord action requires a Find What argument.@You tried to run a macro set to one of the current field's properties, but you left the Find What argument blank.@When you click OK, an Action Failed dialog box will display the macro name and the macro's arguments. In the Macro window, enter text or an expression for the Find What argument, and try the Search operation again.@1@603015@1 |
2143 | You didn't specify search criteria with a FindRecord action.@In the Macro window, insert a FindRecord action before the FindNext action.@@1@603015@1 |
2144 | The setting for the ListRows property must be from 1 through 255.@@@1@604055@1 |
2145 | The ColumnWidths property setting must be a value from 0 through 22 inches (55.87 cm) for each column in a list box or a combo box.@If there is more than one column, separate the numbers with either a semicolon or the list separator character. List separator characters are defined in the Regional Settings section of Windows Control Panel.@@1@600847@1 |
2146 | Microsoft Access can't save the last change for the reason given in the previous error message.@For example, you may have entered a duplicate value in a field with an index that prohibits duplicate values.@Click Undo on the Edit menu, or enter a new value in the field.@1@@1 |
2147 | You must be in Design view to create or delete controls.@@@1@5054@1 |
2148 | The number you used to refer to the form or report section is invalid.@Make sure that the number is less than the number of sections in the form or report.@@1@@1 |
2149 | The constant you entered for the control type is invalid.@For a list of valid constants you can use to create a control, click Help.@@2@610905@1 |
2150 | This type of control can't contain other controls.@@@1@@1 |
2151 | The parent control can't contain the type of control you selected.@For example, you used the CreateControl function to designate an option group as the parent of a text box.@@1@@1 |
2152 | You can set group levels for reports only, not for forms.@@@1@@1 |
2153 | You can't specify more than 10 group levels.@@@1@@1 |
2154 | You can't call this function when the Sorting and Grouping box is open.@@@1@@1 |
2155 | Microsoft Access has encountered an error in compiling the Visual Basic code.@You don't have permission to edit code; inform someone who does have permission about this error.@@1@@1 |
2156 | Microsoft Access has encountered an error in compiling the Visual Basic code.@Do you want to view the error in its context?@@19@@2 |
2157 | The sum of the top margin, the bottom margin, the height of the page header, and the height of the page footer is greater than the length of the page you are printing on.@@@1@@1 |
2158 | You can use the Print method and the report graphics methods (Circle, Line, PSet, and Scale) only in an event procedure or a macro set to the OnPrint, the OnFormat, or the OnPage event propety.@@@1@210129@1 |
2159 | “There isn't enough memory to initialize the Print method or one of the report graphics methods (Circle, Line, PSet, Scale).@Close unneeded programs and try again to print or preview the report. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@1” |
2160 | “Microsoft Access couldn't create the graphic or text.@An error occurred while initializing the Print method or one of the report graphics methods (Circle, Line, PSet, Scale).@Close unneeded programs and try again to print or preview the report. For information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@1@@1” |
2161 | The text or expression you entered doesn't match the type of data you are searching for.@Redefine the text or expression, or search in a different field.@@1@@1 |
2162 | “A macro set to one of the current field's properties failed because of an error in a FindRecord action argument.@In the Macro window, change the Search As Formatted argument to Yes. If you want the argument setting to remain No, do all of the following:
|
2163 | The page number you used as an argument for the GoToPage action or method doesn't exist in this form.@@@1@603017@1 |
2164 | You can't disable a control while it has the focus.@@@1@5250@1 |
2165 | You can't hide a control that has the focus.@@@1@@1 |
2166 | You can't lock a control while it has unsaved changes.@@@1@@1 |
2167 | This property is read-only and can't be modified.@@@1@@1 |
2169 | “You can't save this record at this time.@Microsoft Access may have encountered an error while trying to save a record.
If you close this object now, the data changes you made will be lost. Do you want to close the database object anyway?@@19@@2” |
2170 | “There isn't enough memory to retrieve data for the list box.@Close unneeded programs. Then close and reopen the active form, and click the list box again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@1” |
2171 | You can't have more than seven nested subforms in a main form.@Remove the eigth nested subform.@@1@@1 |
2172 | You can't use a pass-through query or a non-fixed-column crosstab query as a record source for a subform or subreport.@Before you bind the subform or subreport to a crosstab query, set the query's ColumnHeadings property.@@2@209979@1 |
2173 | “The control '|' the macro is attempting to search can't be searched.@Try one of the following:
|
2174 | You can't switch to a different view at this time.@Code was executing when you tried to switch views.@If you are debugging code, you must end the debugging operation before switching views.@1@@1 |
2175 | “There isn't enough free memory to continue the Search operation.@Close unneeded programs. Then try the Search operation again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@3” |
2176 | The setting for this property is too long.@You can enter up to either 255 or 2,048 characters for this property, depending on the data type.@@1@@1 |
2177 | You can't insert a report into a form.@A report can be inserted only into a report.@@1@@1 |
2178 | You can't add another section now.@The maximum total height for all sections in a report, including the section headers, is 200 inches (508 cm).@Remove or reduce the height of at least one section, and then add the new section.@1@@1 |
2181 | “You can't sort on a calculated field in a form.@You can sort on a calculated field only in a query.@Create a calculated field in a query, sort the field, and then base the form on the query. Because the query must execute before the form opens, the form will open more slowly.@1@@1” |
2182 | You can't sort on this field.@@@1@@1 |
2183 | Microsoft Access can't create an object of the type requested.@You are trying either to create a form from a report that has been saved as text, or to create a report from a saved form.@@1@@1 |
2184 | The value you used for the TabIndex property isn't valid. The correct values are from 0 through |.@@@2@606348@1 |
2185 | “You can't reference a property or method for a control unless the control has the focus.@Try one of the following:
|
2186 | This property isn't available in Design view.@Switch to Form view to access this property, or remove the reference to the property.@@1@@1 |
2187 | This property is available only in Design view.@@@1@@1 |
2188 | The object you attempted to load from text has an invalid value for the property '|1' on a |2.@@@1@@1 |
2189 | Your code contains a syntax error, or a Microsoft Access function you need isn't available.@If the syntax is correct, check the Control Wizards subkey or the Libraries key in the Microsoft Access section of the Windows Registry to verify that the entries you need are listed and available.@If the entries are correct, you need to correct the Microsoft Access Utility Add-in or the file acWzlib. To do so, run Microsoft Access or Microsoft Office Setup to reinstall Microsoft Access. Before you reinstall, delete the Windows Registry keys for the Microsoft Access Utility Add-in and acWzlib.@1@@1 |
2190 | This property has been replaced by a new property; use the new property instead.@@@1@@1 |
2191 | You can't set the | property after printing has started.@Try setting this property in the OnOpen event.@@1@@1 |
2192 | The bitmap you specified is not in a device-independent bitmap (.dib) format.@You tried to set the PictureData property of a form, report, button, or image control.@@1@@1 |
2193 | The left margin, right margin, or both margins are wider than the paper size specified in the Print Setup dialog box.@@@1@@1 |
2194 | You can't set the PictureData property in Datasheet view.@To see the valid settings for this property, search the Help index for 'PictureData property'.@@1@@1 |
2195 | The section name you entered doesn't follow Microsoft Access object-naming rules.@@@2@611734@1 |
2196 | “Microsoft Access can't retrieve the value of this property.@The property isn't available from the view in which you're running the macro or Visual Basic code, or Microsoft Access encountered an error while retrieving the value of the property. To see the valid settings for this property, search the Help index for the name of the property.@@1@@1” |
2197 | You can't set a subform control's SourceObject property to a zero-length string if you're displaying the main form in Form view.@You can set this property to a zero-length string from Design view, Datasheet view, or Print Preview.@@1@@1 |
2200 | The number you entered is invalid.@@@1@@1 |
2201 | There was a problem retrieving printer information for the |1 on |2. The object may have been sent to a printer that is unavailable.@@@@@ |
2202 | You must install a printer before you design, print, or preview.@To install a printer, point to Settings on the Windows Start menu, click Printers, and then double-click Add Printer. Follow the instructions in the wizard.@@1@@1 |
2203 | “The dynamic-link library Commdlg failed: error code '0x|'.@The printer driver for the selected printer may be incorrectly installed. For information on selecting another printer or reinstalling this printer from Microsoft Windows, search the Windows Help index for 'printer setup'.@@1@@1” |
2204 | The default printer driver isn't set up correctly.@For information on setting a default printer, search the Microsoft Windows Help index for 'default printer, setting'.@@1@@1 |
2205 | The default printer driver isn't set up correctly.@For information on setting a default printer, search the Microsoft Windows Help index for 'default printer, setting'.@@1@@1 |
2206 | The page number you entered is invalid.@For example, it may be a negative number or an invalid range, such as 6 to 3.@@1@@1 |
2207 | Microsoft Access can't print macros.@You tried to use the PrintOut action or method, but the active object is a macro.@If you want to print an object other than a macro, use the SelectObject action or method to select the desired object before you run the PrintOut action.@1@603041@1 |
2210 | Microsoft Access can't print or preview the page because the page size you selected is larger than 22.75 inches.@@@1@@1 |
2211 | Microsoft Access can't print or preview the Debug window.@@@1@@1 |
2212 | “Microsoft Access couldn't print your object.@Make sure that the specified printer is available. For information on setting a default printer, search the Windows Help index for 'default printer, setting'.@@1@@1” |
2220 | Microsoft Access can't open the file '|'.@@@1@@1 |
2221 | The text is too long to be edited.@@@1@@1 |
2222 | This control is read-only and can't be modified.@@@1@@1 |
2223 | The file name '|' is too long.@Enter a file name that's 256 characters or less.@@1@@1 |
2225 | Microsoft Access couldn't open the Clipboard.@The Clipboard isn't responding, probably because another application is using it. Close all other applications and try the operation again.@@1@@1 |
2226 | The Clipboard isn't responding, so Microsoft Access can't paste the Clipboard's contents. Another application may be using the Clipboard.
There may not be enough free memory for the paste operation. Close all other applications, and then copy and paste again. |
2227 | The data on the Clipboard is damaged, so Microsoft Access can't paste it.@There may be an error in the Clipboard, or there may not be enough free memory. Try the operation again.@@1@@1 |
2229 | Microsoft Access can't start the OLE server.@You tried to use a form, report, or datasheet that contains an OLE object, but the OLE server (the application used to create the object) may not be registered properly. Reinstall the OLE server to register it correctly.@@1@@1 |
2234 | Microsoft Access can't paste the OLE object.@@@1@@1 |
2237 | The text you entered isn't an item in the list.@Select an item from the list, or enter text that matches one of the listed items.@@1@@1 |
2239 | “The database '|' needs to be repaired or isn't a Microsoft Access database file.@You may have quit Microsoft Access unexpectedly with the database open.@To repair the database, click the Repair Database command on the Tools menu (Database Utilities submenu). If the database can't be repaired, the .mdb file is unusable. Restore the database from a backup copy or create a new database.@1@@1” |
2243 | The data in the Clipboard isn't recognizable; Microsoft Access can't paste the OLE object.@@@1@@1 |
2244 | “The file name you specified in the Picture property for a command button or toggle button can't be read.@* The file you specified may be corrupted. Restore the file from a backup copy or re-create the file. The disk where the file is located may be unreadable. |
2245 | The file you specified doesn't contain valid icon data.@Specify a valid icon file.@@1@600829@1 |
2246 | Microsoft Access can't run the query; the parameter values are too large.@The total length of all the values entered for the parameters cannot exceed 1,024 characters.@@1@@1 |
2260 | “An error occurred while sending data to the OLE server (the application used to create the object).@* You may have tried to send too much data. If you're creating a chart and the chart is based on a query, modify the query so that it selects less data. If the chart is based on a table, consider basing it on a query instead so that you can limit the data.
|
2262 | This value must be a number.@@@1@@1 |
2263 | The number is too large.@@@1@@1 |
2264 | Microsoft Access didn't recognize the unit of measurement.@Type a valid unit, such as inches (in) or centimeters (cm).@@1@@1 |
2265 | You must specify a unit of measurement, such as inches (in) or centimeters (cm).@@@1@@1 |
2266 | '|' may not be a valid setting for the RowSourceType property, or there was a compile error in the function.@For information on valid settings for the RowSourceType property, click Help.@@2@603853@1 |
2267 | There is not enough disk space to create a temporary buffer file for printing.@Free up some disk space to make room for the temporary buffer file.@@1@@1 |
2269 | Some library databases couldn't be loaded because too many were specified.@To change library database references, click References on the Tools menu.@@1@209017@1 |
2272 | The setting for the Update Retry Interval must be from 0 through 1,000 milliseconds.@@@1@@1 |
2273 | The setting for Update Retries must be from 0 through 10.@@@1@@1 |
2274 | The database '|' is already open as a library database.@@@1@@1 |
2275 | The string returned by the builder was too long.@The result will be truncated.@@1@@1 |
2276 | The custom builder you're using caused an error by changing the focus to a different window while you were using it.@Enter a value without using the custom builder.@@1@@1 |
2277 | There was a font initialization error.@@@1@@1 |
2278 | “Microsoft Access can't save your changes to this bound OLE object.@Either you don't have permission to write to the record in which the object is stored, or the record is locked by another user. Copy the object to the Clipboard (select the object and click Copy on the Edit menu), and click Undo Current Record on the Edit menu. Then open the application you used to create the object, paste the object from the Clipboard, and save it.@@1@410222@1” |
2279 | The value you entered isn't appropriate for the input mask '|' specified for this field.@@@2@509118@1 |
2280 | You have added more output formats to the Windows Registry than Microsoft Access can initialize.@Some output formats will not be available. Remove those formats that you never or least often use.@@1@@1 |
2281 | The formats that enable you to output data as a Microsoft Excel, rich-text format, MS-DOS text, or HTML file are missing or incorrectly registered in the Windows Registry.@Run Setup to reinstall Microsoft Access or, if you're familiar with the settings in the Registry, try to correct them yourself. For more information about the Registry, click Help.@@2@109015@1 |
2282 | The formats that enable you to output data as a Microsoft Excel, rich-text format, MS-DOS text, or HTML file are missing from the Windows Registry.@Run Setup to reinstall Microsoft Access or, if you're familiar with the settings in the Registry, try to correct them yourself. For more information on the Registry, click Help.@@2@109015@1 |
2283 | The format specification for '|' is invalid.@You can't save output data to a file in this format until you correct the setting for the format in the Windows Registry. Run Setup to reinstall Microsoft Access or, if you're familiar with the settings in the Registry, try to correct them yourself. For more information on the Registry, click Help.@@2@109015@1 |
2284 | “Microsoft Access can't write to the file.@* The network may not be working. Wait until the network is working, and then try again. You may be out of memory. Close one or more Microsoft Access windows, close other applications, or restart Microsoft Windows, and then try again.@@1@@1” |
2285 | “Microsoft Access can't create the output file.
|
2286 | “Microsoft Access can't close the file.@* The network may not be working. Wait until the network is working, and then try again. You may be out of memory. Close one or more Microsoft Access windows, close other applications, or restart Microsoft Windows, and then try again.@@1@@1” |
2287 | Microsoft Access can't open the mail session.@Check your mail application to make sure that it's working properly.@@1@@1 |
2288 | Microsoft Access can't load the '|' format.@The setting for this format in the Windows Registry is incorrect. You can't save the output data to a file in this format until you correct the setting in the Registry.@Run Setup to reinstall Microsoft Access or, if you're familiar with the settings in the Registry, try to correct them yourself. For more information on the Registry, click Help.@2@109015@1 |
2289 | Microsoft Access can't output the module in the requested format.@@@1@@1 |
2290 | There were too many message recipients; the message was not sent.@@@1@@1 |
2291 | There are too many message attachments; the message was not sent.@@@1@@1 |
2292 | The message text is too long, so it was not sent.@@@1@@1 |
2293 | Microsoft Access can't send a message for the reason stated in the preceding alert.@Resolve that problem, and then send the message again.@@1@@1 |
2294 | “Microsoft Access can't attach the object; the message was not sent.@
|
2295 | Unknown message recipient(s); the message was not sent.@@@1@@1 |
2296 | The password is invalid; the message wasn't sent.@@@1@@1 |
2297 | Microsoft Access can't open the mail session.@You may be out of memory. Close one or more Microsoft Access windows, close other applications, or restart Microsoft Windows, and then try again. You may also want to check your mail application to ensure that it's working properly.@@1@@1 |
2298 | “Microsoft Access can't start the wizard, builder, or add-in.@* The library database containing the wizard, builder, or add-in may not be installed. Point to Add-ins on the Tools menu, and then click Add-in Manager to see if the library database is installed. |
2299 | Microsoft Access can't open the Zoom box.@The Microsoft Access Utility add-in is missing or was modified. Rerun Microsoft Access or Microsoft Office Setup to reinstall Microsoft Access and the Microsoft Access Utility add-in.@@1@212620@1 |
2300 | Microsoft Access can't output because you have selected too many controls with differing styles, such as color and font.@Reduce the number of controls selected, and then try again.@@1@@1 |
2301 | There are not enough system resources to output the data.@Close one or more Microsoft Access windows, close other applications, or restart Microsoft Windows. Then try to output the data again.@@1@@1 |
2302 | “Microsoft Access can't save the output data to the file you've selected.@* The file may be open. If so, close it, and then save the output data to the file again.
|
2303 | “Microsoft Access can't output data now.@
|
2304 | Microsoft Access can't save output data to the specified file.@Make sure that you have enough free disk space on your destination drive.@@1@@1 |
2305 | There are too many columns to output, based on the limitation specified in the output format or by Microsoft Access.@@@1@@1 |
2306 | There are too many rows to output, based on the limitation specified by the output format or by Microsoft Access.@@@1@@1 |
2307 | You haven't selected any data, or the object you've selected is blank.@@@1@@1 |
2308 | The file '|' already exists.@Do you want to replace the existing file?@@20@@2 |
2309 | There is an invalid add-in entry for '|.'@There is an error in the Windows Registry for this add-in. Correct the setting and restart Microsoft Access. For information on the Registry, click Help.@@2@109015@1 |
2311 | There isn't enough memory to run the NotInList event procedure.@@@1@@1 |
2312 | The shortcut '|' must be re-created.@The file may be missing, damaged, or in an older format that can't be read.@@1@@1 |
2313 | Microsoft Access can't find the shortcut databases '|1' or '|2.'@Re-create the shortcut with the correct locations of the databases.@@2@209032@1 |
2314 | Microsoft Access can't find the shortcut database '|.'@Re-create the shortcut with the correct location of the database.@@2@209032@1 |
2315 | The input string is too long.@@@1@@1 |
2316 | This table or query can't be opened because it has no visible fields.@This can result if the table or query has only system fields, and the Show System Objects option is off.@To turn on the Show System Objects option, click Options on the Tools menu, click the View tab, and select the System Objects check box.@1@@1 |
2317 | The database '|' can't be repaired or isn't a Microsoft Access database file.@@@1@@1 |
2319 | Microsoft Access can't import the object '|' while it is open.@@@1@@3 |
2320 | Microsoft Access can't display the field for which you entered Where in the Total row.@Clear the Show check box for that field. If you want this field to appear in the query's results, add it to the design grid twice. For the field that will appear in the query's results, don't specify Where in the Total row, and make sure the Show check box is checked.@@1@@1 |
2321 | You can't set criteria before you add a field or expression to the Field row.@Either add a field from the field list to the column and enter an expression, or delete the criteria.@@1@@1 |
2322 | You can't sort on the asterisk (*).@Because the asterisk represents all fields in the underlying table or query, you can't sort on it.@Add the asterisk to the query design grid, along with the specific fields you want to sort on. Clear the Show check box for the sorting fields, and then specify a sort order.@1@@1 |
2323 | You can't specify criteria for the asterisk (*).@Because the asterisk represents all the fields in the underlying table or query, you can't specify criteria for it.@Add the asterisk to the query design grid, along with the field(s) you want to set criteria for, and then enter criteria for the specific fields. In the query design grid, clear the Show check box for the criteria field(s), before you run the query.@1@@1 |
2324 | You can't calculate totals on the asterisk (*).@Because the asterisk represents all the fields in the table, you can't calculate totals on it.@Remove the asterisk from the query design grid. Add the fields you want to use to the design grid, and then select the total you want to calculate for specific fields.@1@11202@1 |
2325 | The field name you entered exceeds the LinkMasterFields property's 64-character limit.@When you use the Relationships command (Tools menu) to define a relationship between the tables underlying a form and subform, Microsoft Access links the form and subform automatically and sets the LinkChildFields and LinkMasterFields properties.@@1@603990@1 |
2326 | “You can't specify Group By, Expression, or Where in the Total row for this column.@Specify an aggregate function, such as Sum or Count, for the field or expression you designate as the Value in the crosstab query. For more information on aggregate functions, click Help.@@2@209980@1” |
2327 | You must enter Group By in the Total row for a field that has Column Heading in the Crosstab row.@The values derived from the field or expression that you designate as the Column Heading are used to group data in the crosstab query.@@1@209980@1 |
2328 | You can't run an update query on the asterisk (*).@Because the asterisk represents all the fields in the table, you can't update it.@Remove the asterisk from the query design grid. Add the fields you want to update to the design grid.@1@210001@1 |
2329 | To create a crosstab query, you must specify one or more Row Heading(s) options, one Column Heading option, and one Value option.@@@1@209980@1 |
2330 | “Microsoft Access can't represent the join expression | in Design view.
|
2331 | You must enter Group By in the Total row for at least one of the Row Heading options you enter in the Crosstab row.@@@1@209980@1 |
2332 | Microsoft Access can't match the fields you added using the asterisk (*) in the append query.@Because the asterisk represents all the fields in the underlying table or query, you can't append an asterisk to one field or expression, and you can't append a single field or expression to an asterisk.@Append an asterisk to an asterisk (for example, a table to a table), or append specific fields.@1@209999@1 |
2333 | You must enter the name of the table you are creating or appending records to.@You tried to define a make-table or append query without specifying a destination table.@@1@@1 |
2334 | “Microsoft Access can't print '|' because it is an action query.@Because action queries don't produce a recordset, you can't print a Datasheet view of them. Note that an exclamation point (!) joined to a query icon in the Database window marks an action query.@To print a Datasheet view of the records that will be selected by the query, display the query in Design view, click the Datasheet button, and then click the Print button.@1@@1” |
2335 | “You must use the same number of fields when you set the LinkChildFields and LinkMasterFields properties.@You entered a different number of fields for one property than you did for the other. If you use the Relationships command (Tools menu) to define a relationship between the tables underlying the form and subform, Microsoft Access will link the form and subform automatically and then set the LinkChildFields and LinkMasterFields properties.@@1@209086@1” |
2337 | You can't specify criteria on the same field for which you entered Value in the Crosstab row.@You tried to display a crosstab query after entering Value in the Crosstab row and criteria in the Criteria row.@If you want this field to supply the cross-tabulated values in the crosstab query, delete the entry in the Criteria row. If you want this to be a criteria field, leave the Crosstab row blank.@1@209980@1 |
2338 | Microsoft Access truncated the expression you entered.@The expression '|' exceeds the 1,024-character limit for the query design grid.@@1@@1 |
2339 | Microsoft Access can't create a temporary link.@You reached the limit for the number of links in your database. Microsoft Access needs to create a temporary link in order to import your ODBC table.@Remove all unneeded links or tables.@1@@1 |
2340 | The expression you entered exceeds the 1,024-character limit for the query design grid.@@@1@@1 |
2342 | A RunSQL action requires an argument consisting of an SQL statement.@For example, an action query that appends records starts with INSERT INTO. A data-definition query that creates a table starts with CREATE TABLE.@@1@603698@1 |
2343 | The value you entered exceeds the Alias property's 64-character limit.@@@1@606146@1 |
2344 | For the TopValues property in the query property sheet, you must enter an integer greater than zero.@@@1@@1 |
2345 | For the TopValues property in the query property sheet, you must enter a percentage from 1 through 100.@@@1@@1 |
2346 | For the TopValues property in the query property sheet, you must enter a number greater than zero.@@@1@@1 |
2347 | Microsoft Access can't find the file name you entered for the DestinationDB property in an action query's property sheet.@You may have misspelled the database file name, or the file may have been deleted or renamed.@@1@606183@1 |
2348 | You can't leave the Alias property blank.@@@1@606146@1 |
2349 | For the TopValues property in the query property sheet, you must enter a number smaller than 2,147,483,647.@@@1@@1 |
2350 | “Microsoft Access can't save the query.@* The query is a pass-through query and can't be represented as a simple SQL string. Save the query as a named query from the Query Builder. When you close the Query Builder, Microsoft Access will fill the RecordSource or RowSource property with the saved query name. Make sure the query doesn't have an SQL syntax error.@@1@604309@1” |
2351 | Microsoft Access can't represent an implicit VALUES clause in the query design grid.@Edit this in SQL view.@@1@@1 |
2352 | You can't modify this query because it has been deleted or renamed by another user.@@@1@@1 |
2353 | Bad query parameter '|'.@@@1@@1 |
2360 | A field name is missing.@You have defined a data type or a description for a field without specifying the field name.@Enter a name for the field, or delete the row.@1@@1 |
2361 | Microsoft Access can't save this table.@There are no fields in this table.@Define at least one field by entering a field name and selecting a data type.@1@@1 |
2362 | You already have a field named '|.'@@@1@@1 |
2363 | Microsoft Access allows only one AutoNumber field per table.@Use the Number data type for similar fields.@@1@@1 |
2364 | Microsoft Access can't open the table in Datasheet view.@@@1@@1 |
2366 | Microsoft Access was unable to save the field ordering. All other changes were saved successfully.@Close this database and choose the Repair Database command on the Tools menu (Database Utilities submenu).@@1@@1 |
2370 | Removing or changing the index for this field would require removal of the primary key.@If you want to delete the primary key, select that field and click the Primary Key button.@@1@@1 |
2371 | Microsoft Access can't create a primary key. Your changes weren't saved.@@@1@@1 |
2372 | The field name is invalid.@@@1@@1 |
2373 | The setting for the FieldSize property must be from 0 through 255.@@@1@@1 |
2374 | You can't create an index or primary key on more than 10 fields.@@@1@@1 |
2375 | You can't paste beyond the end of a table.@You have attempted to paste fields beyond the 255th row in a table in Design view.@@1@@1 |
2376 | Microsoft Access can't create a primary key.@You have selected too many fields for a multiple-field primary key.@@1@@1 |
2377 | Once you enter data in a table, you can't change the data type of any field to AutoNumber, even if you haven't yet added data to that field.@Add a new field to the table, and define its data type as AutoNumber. Microsoft Access then enters data in the AutoNumber field automatically, numbering the records consecutively starting with 1.@@1@@1 |
2378 | This table is read-only.@Use a different name in the Save As dialog box to save your changes.@@1@@1 |
2379 | You can't create a primary key on a field of this data type.@You can't define a primary key on fields with an OLE Object data type.@@1@@1 |
2380 | Microsoft Access can't create a primary key because no fields have been selected.@You have selected a row with no fields defined.@Place the insertion point somewhere in the row of the field you want to define as the primary key.@1@@1 |
2381 | Microsoft Access can't create a primary key because the field doesn't have a name.@Name the field, and then define it as a primary key field.@@1@@1 |
2382 | You can't switch to Datasheet view and you can't return to Design view.@Another user has opened this table, or a query, form, or report that is bound to this table.@@1@@1 |
2383 | Microsoft Access can't change the data type.@There isn't enough disk space or memory.@@1@@1 |
2384 | “You can't change one field from an AutoNumber data type and add another AutoNumber field at the same time.@Do the following:
|
2385 | Errors were encountered during the save operation. |@@@1@@1 |
2386 | Microsoft Access was unable to create the table.@@@1@@1 |
2387 | You can't delete the table '|'; it is participating in one or more relationships.@If you want to delete this table, first delete its relationships in the Relationships window.@@1@@1 |
2388 | You can't change the primary key.@This table is the primary table in one or more relationships.@If you want to change or remove the primary key, first delete the relationship in the Relationships window.@1@@1 |
2389 | You can't delete the field '|.'@It is part of one or more relationships.@If you want to delete this field, first delete its relationships in the Relationships window.@1@@1 |
2390 | You can't change the data type or field size of this field; it is part of one or more relationships.@If you want to change the data type of this field, first delete its relationships in the Relationships window.@@1@@1 |
2391 | Field '|1' doesn't exist in destination table '|2.'@Microsoft Access was unable to complete the append operation. The destination table must contain the same fields as the table you are pasting from.@@1@@1 |
2392 | You can't set the Unique property of a primary key to No.@A primary key, by definition, contains only unique values.@If you want to allow nonunique values in this field, remove the primary key definition by setting the Primary property to No.@1@@1 |
2393 | You can't set the IgnoreNulls property of a primary key to Yes.@A primary key, by definition, can't allow null values.@If you want null values in this field, remove the primary key definition by setting the Primary property to No.@1@@1 |
2394 | The index name is invalid.@The index name may be too long (over 64 characters) or contain invalid characters.@@1@@1 |
2395 | Indexes must have names.@@@1@@1 |
2396 | Microsoft Access can't create an index or primary key.@One or more field names are missing.@Enter or select at least one field in the Field Name column for each index you name.@1@@1 |
2397 | You already have an index named '|.'@@@1@@1 |
2398 | The primary key has been changed.@This table is the primary table in one or more relationships. Changes to the primary key won't be saved.@@1@@1 |
2400 | The row you inserted in the grid exceeds the limit of 255 rows (fields) for a table or 1,000 rows (actions) for a macro.@@@1@@1 |
2420 | The expression you entered has an invalid number.@@@2@611732@1 |
2421 | The expression you entered has an invalid date value.@@@2@611729@1 |
2422 | The expression you entered has an invalid string.@A string can be up to 255 characters long, including opening and closing quotation marks.@@1@@1 |
2423 | The expression you entered has an invalid . (dot) or ! operator or invalid parentheses.@You may have entered an invalid identifier or typed parentheses following the Null constant.@@2@611736@1 |
2424 | The expression you entered has a field, control, or property name that Microsoft Access can't find.@@@1@@1 |
2425 | The expression you entered has a function name that Microsoft Access can't find.@@@1@@1 |
2426 | “The function you entered can't be used in this expression.@
|
2427 | You entered an expression that has no value.@The expression may refer to an object that has no value, such as a form, a report, or a label control.@@1@@1 |
2428 | “You entered an invalid argument in a domain aggregate function.@
|
2429 | The In operator you entered requires parentheses.@@@1@@1 |
2430 | “You did not enter the keyword And in the Between…And operator.@The correct syntax is as follows: expression [Not] Between value1 And value2@@1@@1” |
2431 | The expression you entered contains invalid syntax.@You may have entered a comma without a preceding value or identifier.@@1@@1 |
2432 | “The expression you entered contains invalid syntax, or you need to enclose your text data in quotes.@You may have entered an invalid comma or omitted quotation marks. For example, if the Default Value property of a text field is “Huey, Louie, and Dewey,” it must be enclosed in quotes if you mean it as a literal text string. This avoids the confusion with the expression "Huey Louie" And "Dewey".@@1@@1” |
2433 | The expression you entered contains invalid syntax.@You may have entered an operator, such as the + operator, in an expression without a corresponding operand.@@1@@1 |
2434 | The expression you entered contains invalid syntax.@You may have entered an operand without an operator.@@1@@1 |
2435 | The expression you entered has too many closing parentheses.@@@1@@1 |
2436 | The expression you entered is missing a closing parenthesis, bracket (]), or vertical bar (|).@@@1@@1 |
2437 | The expression you entered has invalid vertical bars (|).@@@1@@1 |
2438 | The expression you entered contains invalid syntax.@You omitted an operand or operator, you entered an invalid character or comma, or you entered text without surrounding it in quotation marks.@@2@611732@1 |
2439 | The expression you entered has a function containing the wrong number of arguments.@@@1@@1 |
2440 | You must enclose IIf function arguments in parentheses.@@@1@1012957@1 |
2442 | “The expression you entered has invalid parentheses.@You may have used the parenthesis syntax for an identifier in a query. Use the standard identifier syntax: Forms![Form]![Control].@@1@411729@1” |
2443 | You can use the Is operator only in an expression with Null or Not Null.@@@1@1008950@1 |
2445 | The expression you entered is too complex.@@@2@611732@1 |
2446 | “There isn't enough memory available to perform this calculation.@Close unneeded programs, and try again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@1” |
2447 | There is an invalid use of the . (dot) or ! operator or invalid parentheses.@You may have entered an invalid identifier or typed parentheses following the Null constant.@@2@611736@1 |
2448 | “You can't assign a value to this object.@ |
2449 | There is an invalid method in an expression.@For example, you may have tried to use the Print method with an object other than Report or Debug.@@2@2015551@1 |
2450 | “Microsoft Access can't find the form '|' referred to in a macro expression or Visual Basic code.@
|
2451 | The report name '|' you entered is misspelled or refers to a report that isn't open or doesn't exist.@@@1@@1 |
2452 | The expression you entered has an invalid reference to the Parent property.@For example, you may be using the Parent property with a control on a main form or report rather than with a control on a subform or subreport.@@2@604852@1 |
2453 | The control name '|' you entered in your expression is misspelled or refers to a control on a form or report that isn't open or doesn't exist.@@@1@411730@1 |
2454 | The object name '|' you entered following the ! operator in the expression is invalid.@For example, you may have tried to enter an identifier with two control names separated by the ! operator.@@2@611736@1 |
2455 | You entered an expression that has an invalid reference to the property |.@The property may not exist or may not apply to the object you specified.@@2@2015567@1 |
2456 | The number you used to refer to the form is invalid.@Use the Count property to count the open forms and make sure that the form number is not greater than the number of open forms minus one.@@1@2019460@1 |
2457 | The number you used to refer to the report is invalid.@Use the Count property to count the open reports and make sure that the report number is not greater than the number of open reports.@@1@2019460@1 |
2458 | The control number you specified is greater than the number of controls.@Use the Count property to count the controls on the form or report and then check that the control number you cite is within the range of existing controls.@@1@2019460@1 |
2459 | You can't refer to the Parent property of a form or report when either is open in Design view.@@@1@@1 |
2460 | You can't refer to the RecordsetClone property of a form open in Design view.@@@1@607393@1 |
2461 | Use a section number, not a string, to refer to a form or report section.@@@1@@1 |
2462 | The section number you entered is invalid.@@@1@@1 |
2463 | Use a number, not a string, to refer to a group level.@@@2@606361@1 |
2464 | There is no sorting or grouping field or expression defined for the group level number you used.@A valid group level number can be from 0 (for the first field or expression you sort or group on) through 9 (for the tenth). Count the group levels in the report starting with zero.@@1@@1 |
2465 | Microsoft Access can't find the field '|' referred to in your expression.@You may have misspelled the field name, or the field may have been renamed or deleted.@@1@411730@1 |
2466 | The expression you entered has an invalid reference to the Dynaset property.@For example, you may have used the Dynaset property with a form that isn't based on a table or query.@@1@@1 |
2467 | The expression you entered refers to an object that is closed or doesn't exist.@For example, you may have assigned a form to a Form object variable, closed the form, and then referred to the object variable.@@1@@1 |
2468 | “The value you entered for the interval, number, or date argument in the function is invalid.@Check the argument to make sure that you entered it correctly. For more information on valid argument values, search the Help index for 'DatePart function,''DateAdd function,' or 'DateDiff function'.@@1@@1” |
2469 | “The expression |2 you entered in the form control's ValidationRule property contains the error |1.
Microsoft Access can't parse the ValidationRule expression you entered. For example, if you enter the expression =MyFunction() in the ValidationRule property, and the function MyFunction doesn't exist, Microsoft Access displays the following message: Unknown function name in validation rule: 'MyFunction'. To help you create expressions as arguments in Visual Basic, use the Expression Builder. For more information, search the Help index for 'Expression Builder'.@1@111805@1” |
2470 | There is a(n) '|' in the form control's ValidationRule property.@To help you create expressions as arguments in Visual Basic, use the Expression Builder. For more information, search the Help index for 'Expression Builder'.@@1@111805@1 |
2471 | The expression you entered as a query parameter produced this error: '|'@@@2@611805@1 |
2472 | The LinkMasterFields property setting has produced this error: '|'@@@2@603990@1 |
2473 | “The expression |2 you entered as the event property setting produced the following error: |1.@
|
2474 | “The expression you entered requires the control to be in the active window.@Try one of the following:
|
2475 | You entered an expression that requires a form to be the active window.@@@1@5601@1 |
2476 | You entered an expression that requires a report to be the active window.@@@1@5603@1 |
2477 | You entered an invalid objecttype value '|' in an If TypeOf object Is objecttype condition of an If…Then…Else statement.@The objecttype can be any one of the following: BoundObjectFrame, CheckBox, ComboBox, CommandButton, Label, Line, ListBox, UnboundObjectFrame, OptionButton, OptionGroup, PageBreak, Rectangle, Subform, Subreport, TextBox, ToggleButton, ImageControl, or OLEControl.@@1@@1 |
2478 | Microsoft Access doesn't allow you to use this method in the current view.@Most methods, including the SetFocus and Requery methods, can't be used in form or report Design view.@@2@2015551@1 |
2479 | “The event procedure '|' can't be a Function procedure; it must be a Sub procedure.@If you want to run a Function procedure when an event occurs, try one of the following:
|
2480 | You referred to a property by a numeric argument that isn't one of the property numbers in the collection.@Check the property numbers in the collection.@@1@@1 |
2481 | You can't set a value while a document is in Print Preview.@@@1@@1 |
2482 | “Microsoft Access can't find the name '|' you entered in the expression.@You may have specified a control that wasn't on the current object without specifying the correct form or report context.@To refer to a control on another form or report, precede the control name with the name of a collection, usually either Forms or Reports, and the name of the form or report to which the control belongs. For example, Forms![Products]![Units In Stock].@1@@1” |
2483 | You can't move to a previous control when only one control has had the focus.@Use the PreviousControl property only after you've moved the focus to a second control.@@1@607144@1 |
2484 | There is no active datasheet.@@@1@@1 |
2485 | “Microsoft Access can't find the macro '|.'@The macro (or its macro group) doesn't exist, or the macro is new but hasn't been saved. Note that when you enter the macrogroupname.macroname syntax in an argument, you must specify the name the macro's macro group was last saved under.@@1@210183@1” |
2486 | “You can't carry out this action at the present time.@You tried to run a macro or used the DoCmd object in Visual Basic to carry out an action. However, Microsoft Access is performing another activity that prevents this action from being carried out now. For example, no actions on a form can be carried out while Microsoft Access is repainting a control or calculating an expression.@Carry out the action later.@1@@1” |
2487 | “The Object Type argument for the action or method is blank or invalid.@
|
2488 | “You can't use the ApplyFilter action on this window.@
|
2489 | “The object '|' isn't open.@
|
2491 | “The action or method is invalid because the form or report isn't bound to a table or query.@You tried to use the ApplyFilter action or method. However, the form or report you applied the filter to is not based on a table or query, so the form or report doesn't have any records to apply a filter to.@Use the SelectObject action or method to select the desired form or report before you run the ApplyFilter action. To base a form or report on a table or query, open the form or report in Design view, and enter the table or query name in the RecordSource property.@1@603041@1” |
2492 | Microsoft Access can't find the macro '|2' in the macro group '|1.'@You used the macrogroupname.macroname syntax to specify a macro. You then tried to run the macro (directly or indirectly), or you used the RunMacro method to run the macro. However, the macro you specified isn't in this macro group.@Create the macro in the macro group, specify the correct macro group, or specify the correct macro name.@1@611313@1 |
2493 | This action requires an Object Name argument.@@@1@@1 |
2494 | The action or method requires a Form Name argument.@You tried to use the OpenForm action or method, but you left the Form Name argument blank.@In the Form Name argument, enter the name of a form in the current database.@1@611313@1 |
2495 | The action or method requires a Table Name argument.@You tried to use the OpenTable, TransferSpreadsheet, or TransferText action or method, but you left the Table Name argument blank.@In the Table Name argument, enter the name of a table that is in the current database.@1@@1 |
2496 | The action or method requires a Query Name argument.@You tried to use the OpenQuery action or method, but you left the Query Name argument blank.@In the Query Name argument, enter a query name.@1@@1 |
2497 | The action or method requires a Report Name argument.@You tried to use the OpenReport action or method, but you left the Report Name argument blank.@In the Report Name argument, enter the name of a report.@1@@1 |
2498 | “An expression you entered is the wrong data type for one of the arguments.@You tried to run a macro or use a method to carry out an action, but an expression evaluated to the wrong data type. For example, for the Close method you specified a string for the Object Type argument, but this argument can be set only to certain intrinsic constants or their numeric equivalents.@@1@@1” |
2499 | “You can't use the GoToRecord action or method on an object in Design view.@Try one of the following:
|
2500 | You must enter a number greater than zero for a Repeat Count argument.@You tried to use the RunMacro action or method, but you entered a value less than zero (or an expression that evaluates to less than zero) in the Repeat Count argument.@To run the macro once, leave this argument blank.@1@@1 |
2501 | “The | action was canceled.@You used a method of the DoCmd object to carry out an action in Visual Basic, but then clicked Cancel in a dialog box. For example, you used the Close method to close a changed form, then clicked Cancel in the dialog box that asks if you want to save the changes you made to the form.@@1@@1” |
2502 | “The action or method requires a Macro Name argument.@
|
2503 | “You can't use this action with the DoCmd object.@For a list of the actions that the DoCmd object doesn't support and some alternatives to using these actions, click Help. Any actions that aren't in this list can be used with the DoCmd object.@@2@611313@1” |
2504 | “The action or method requires at least | argument(s).@You tried to run a macro containing an action or used a method or action with the DoCmd object, but you didn't set the required number of arguments. For example, if you use the MoveSize action, you must set at least one of the four arguments.@@1@611313@1” |
2505 | “An expression in argument | has an invalid value.@You tried to run a macro or used the DoCmd object in Visual Basic. The argument number above is the position of the argument as it appears in the Macro window, the Action Failed dialog box, or the Object Browser (if you're using the DoCmd object).@Try one of the following: |
2506 | “A value you entered for the Transfer Type argument is invalid.@An expression in the Transfer Type argument doesn't evaluate to a valid numeric value.@Valid values for the Transfer Type argument are as follows:
|
2507 | “The | type isn't an installed database type or doesn't support the operation you chose.@You used the TransferDatabase method, but an expression in the databasetype argument doesn't evaluate to a valid database type for importing, exporting, or linking. For information on valid database types, click Help.@@2@604780@1” |
2508 | A value you entered for the spreadsheettype argument is invalid.@You used the TransferSpreadsheet method, and an expression in the spreadsheettype argument doesn't evaluate to a valid numeric value.@Valid values are 0, 2, 3, 4, 5, 6, 7, and 8. Note that 1 is an invalid value; you can't import or export to a Lotus .wks format file.@1@604781@1 |
2509 | The setting for the Range argument can't be longer than 255 characters.@@@1@604781@1 |
2510 | The expression you entered in the Specification Name argument exceeds the 64-character limit.@Select one of the existing specification names from the argument list box when you use the TransferText action in a macro, or enter a name in Visual Basic that follows Microsoft Access object-naming rules.@@2@611734@1 |
2511 | The action or method requires a Specification Name argument.@You tried to use the TransferText action or method and you specified a Transfer Type argument but left the Specification Name argument blank.@In the Specification Name argument, enter an existing specification name from the argument list box.@1@611313@1 |
2512 | Microsoft Access can't parse the expression: '|'.@Click OK to return to the action argument or conditional expression where this expression appears, and then correct the syntax.@@1@@1 |
2513 | The Macro Name argument can't be longer than 64 characters according to Microsoft Access object-naming rules.@@@1@411734@1 |
2514 | The action or method requires a Control Name argument.@You tried to use the GoToControl action or method, but you left the control name blank.@In the Control Name argument, enter a control or field name from the active form or datasheet.@1@611313@1 |
2515 | Microsoft Access can't open the macro '|' because it was saved using a different version of Microsoft Access.@Re-create the macro in the current version of Microsoft Access.@@1@@1 |
2516 | Microsoft Access can't find the module '|.'@You tried to use the OpenModule action or method, but Microsoft Access can't find the module you specified in the Module Name argument.@Enter a valid module name from the current database.@1@@1 |
2517 | “Microsoft Access can't find the procedure '|.'@
|
2519 | The database must be open for the SelectObject method to run.@You tried to run a function in a library database, and the function contains the SelectObject method.@@1@@1 |
2520 | The action or method requires a Module or Procedure Name argument.@You tried to use the OpenModule action or method, but you didn't enter a name in either the Module Name or the Procedure Name argument in the Macro window.@Enter a valid name in one of these arguments.@1@@1 |
2521 | You have specified a Transfer Type that doesn't support the HTML Table Name argument.@Leave the HTML Table Name argument blank unless you are using the Import HTML or Link HTML Transfer Types.@@1@@1 |
2522 | The action or method requires a File Name argument.@You tried to use the TransferSpreadsheet or TransferText action or method.@In the File Name argument, enter a file name.@1@611313@1 |
2523 | The value you entered for the show argument is invalid.@You used the ShowToolbar method.@Valid values for this argument are acToolbarYes, acToolbarWhereApprop, and acToolbarNo, or the corresponding numeric values 0, 1, and 2.@1@612446@1 |
2524 | Microsoft Access can't invoke the application using the RunApp action.@The path to the application is invalid, or a component of the application is missing.@Check the path in Windows Explorer or File Manager.@1@@1 |
2525 | A macro can call itself a maximum of 20 times.@Your macro contains a RunMacro action that calls the same macro more than 20 times.@Use a condition to stop the macro after it has been run 20 times, or call another macro with the RunMacro action.@1@@1 |
2526 | The SendKeys action requires the Microsoft Access Utility Add-in to be loaded.@Rerun Microsoft Access or Microsoft Office Setup to reinstall Microsoft Access and the Microsoft Access Utility Add-in.@@1@@1 |
2527 | Lotus .wks file formats aren't supported in the current version of Microsoft Access.@Convert your .wks file to a more recent format, such as .wk1.@@1@@1 |
2528 | The RunCommand macro action argument is missing, or you entered an invalid command ID for the RunCommand method.@@@1@@1 |
2529 | The Toolbar argument can't be longer than 64 characters.@@@1@@1 |
2530 | The SelectObject method can't be used on a report that is currently printing.@@@1@@1 |
2531 | Your HTML file does not contain any tabular data that Microsoft Access can import.@.@@1@@1 |
2532 | “Microsoft Access can't find the macro or sub procedure '|.'@The specified macro, macro group, or sub procedure doesn't exist.@ Note that when you enter the macrogroupname.macroname syntax in an argument, you must specify the name the macro's macro group was last saved under. Also, ensure that the referenced macro has been saved, or that the referenced sub procedure expects 0 arguments.@1@@1” |
2533 | The ApplyFilter action requires that either the Filter Name or Where Condition argument is set.@You tried to run a macro containing an ApplyFilter action, but you didn't set the required arguments.@@1@611313@1 |
2534 | The action or method requires a data access page Name argument.@You tried to use the OpenDataAccessPage action or method, but you left the data access page Name argument blank.@In the data access page Name argument, enter the name of a data access page in the current database.@1@611313@1 |
2535 | The ApplyFilter action contains a Filter Name that cannot be applied.@The filter name is not a valid argument in the ApplyFilter action in Client Server.@@1@611313@1 |
2540 | The file '|' you tried to replace is a Microsoft Access system file that is in use and can't be replaced or deleted.@@@1@@1 |
2541 | The contents of the Clipboard have been deleted and can't be pasted.@Some applications do not put large objects on the Clipboard. Instead, they put a pointer to the object on the Clipboard. The pointer may vanish before the paste happens.@@1@@1 |
2542 | Specify the database name in the command line so that Microsoft Access can find the macro.@@@1@@1 |
2543 | You can't paste a database object onto itself.@@@1@@1 |
2544 | Microsoft Access can't find the | you referenced in the Object Name argument.@The macro you tried to run includes a SelectObject action with an invalid name for the Object Name argument.@In the Database window, verify the name of the object you want the macro to select. Then open the macro in the Macro window and enter the correct name for the Object Name argument.@2@603041@1 |
2545 | The CopyObject action requires you to specify a different destination database or a new name to copy from the current database.@The macro you are running includes a CopyObject action.@Open the macro in the Macro window, and select the CopyObject action. Enter a destination database or a new name in the appropriate argument box.@1@603009@1 |
2546 | Select a database object in the Database window before you run the macro containing the | action.@@@2@603009@1 |
2547 | The database '|' you tried to delete and replace is read-only and can't be deleted or replaced.@Enter a different name for the new database.@@1@@1 |
2548 | Microsoft Access can't run the Security Wizard because this database is open in exclusive mode.@Do you want Microsoft Access to open the database in shared mode and run the Security Wizard?@@19@@2 |
2549 | “Microsoft Access can't delete |1 after compacting it. The compacted database has been named |2.@If you compact a database using the same name, Microsoft Access creates a new compacted database and then deletes the original database.
In this case, however, the original database wasn't deleted because it is read-only.@If you can, remove the read-only status, delete the original database, and then rename the new database using the original name. If you can't remove the read-only status, inform your workgroup administrator.@1@310299@1” |
2550 | “Microsoft Access can't delete |1 after encrypting it. The encrypted database has been named |2.@If you encrypt a database using the same name, Microsoft Access creates a new encrypted database, and then deletes the original database.
In this case, however, the original database can't be deleted because it is read-only.@If you can, remove the read-only status, delete the original database, and then rename the new database using the original name. If you can't remove the read-only status, inform your workgroup administrator.@1@310299@1” |
2551 | “Microsoft Access can't delete |1 after decrypting it. The decrypted database has been named |2.@If you decrypt a database using the same name, Microsoft Access creates a new decrypted database, and then deletes the original database.
In this case, however, the original database can't be deleted because it is read-only.@If you can, remove the read-only status, delete the original database, and then rename the new database using the original name. If you can't remove the read-only status, inform your workgroup administrator.@1@310299@1” |
2552 | You can't encrypt a database that you didn't create or don't own.@See the owner of the database or your workgroup administrator.@@1@@1 |
2553 | You can't decrypt a database that you didn't create or don't own.@See the owner of the database or your workgroup administrator.@@1@@1 |
2554 | Can't find the database you specified, or you didn't specify a database at all.@Specify a valid database name in the command line, and include a path if necessary.@@1@110283@1 |
2556 | Microsoft Access can't run the Security Wizard because the database has had a password set on it.@You will have to unset the database password by choosing Tools|Security|Unset Database Password.@@1@@1 |
2557 | The database you tried to convert was either created in or was already converted to the current version of Microsoft Access.@@@1@@1 |
2558 | @@@1@209029@3 |
2559 | Microsoft Access was unable to refresh the linked tables '|' during the conversion.@Refresh the links manually by using the Linked Table Manager (Tools menu, Add-ins submenu).@@2@209191@1 |
2560 | Microsoft Access is unable to load the database properties.@@@1@@3 |
2561 | Microsoft Access can't display the Database Properties dialog box.@@@1@@1 |
2562 | Microsoft Access is unable to save the database properties.@@@1@@1 |
2563 | “Microsoft Access can't load a dynamic-link library.@Run Setup to reinstall Microsoft Access. If you want to preserve your security or custom settings, back up the Microsoft Access workgroup information file. For information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@@1@@3” |
2564 | You can't hide the document '|' while it is open.@Close the database object first, and then hide it.@@1@@1 |
2565 | You can't unhide the database object '|' while it is open.@Close the database object first, and then unhide it.@@1@@1 |
2566 | Microsoft Access is unable to set the application's icon to the file '|'.@Make sure the file is a valid icon (.ico) file. If you're using Microsoft Windows, you can also use .bmp files.@@1@@1 |
2567 | Microsoft Access can't open or convert this previous version database.@The database was created in an earlier version of Microsoft Access. You don't have appropriate security permissions to open or convert databases created in earlier versions.@@1@@1 |
2568 | You can't undo this operation.@Another user has created an object with the name '|'.@@1@@1 |
2569 | “Microsoft Access can't delete |1 after enabling it. The enabled database has been named |2.@If you enable a database using the same name, Microsoft Access creates a new enabled database and then deletes the original database.
In this case, however, the original database wasn't deleted because it is read-only.@If you can, remove the read-only status, delete the original database, and then rename the new database using the original name. If you can't remove the read-only status, inform your workgroup administrator.@1@@1” |
2570 | @@@1@@3 |
2571 | You can't modify objects created using an earlier version of Microsoft Access.@To convert this database to the current version of Microsoft Access, close the database, point to Database Utilities on the Tools menu, and then click Convert Database.@@1@@1 |
2572 | This database is in an unexpected state; Microsoft Access can't open it.@This database has been converted from a prior version of Microsoft Access by using the DAO CompactDatabase method instead of the Convert Database command on the Tools menu (Database Utilities submenu). This has left the database in a partially converted state.@If you have a copy of the database in its original format, use the Convert Database command on the Tools menu (Database Utilities submenu) to convert it. If the original database is no longer available, create a new database and import your tables and queries to preserve your data. Your other database objects can't be recovered.@1@@1 |
2573 | This database is a replica from an earlier version of Microsoft Access. Microsoft Access can't open it.@Replicas can't be converted except by their Design Masters.@Convert the Design Master for this replica set to the current version of Microsoft Access, and then synchronize the replica.@1@@1 |
2574 | You can't create another Microsoft Access database with the same name and location as an existing database.@You carried out the Make MDE File command, but tried to give the new database the same extension as the old one.@Accept the default .mde extension for your new MDE database.@1@@1 |
2575 | You can't create a Microsoft Access MDE database from a database replica.@@@1@@1 |
2576 | This database is a Microsoft Access 7.0/8.0 Design Master/Replica.@If you click OK, the database you selected will be renamed to |1 and then converted to |2. Everyone using a replica of this database will have to upgrade to Microsoft Access 2000 after the next synchronization.@@4@@2 |
2577 | The database | is already open.@Close the database before carrying out the Make MDE File command.@@1@@1 |
2578 | Microsoft Access was unable to create an MDE database.@@@1@@1 |
2579 | Local forms, reports, macros, and modules in this replica will not be converted. @To retain these objects, please be sure to import them into the Design Master from the original replica.@@1@@1 |
2580 | The record source '|' specified on this form or report does not exist. @You misspelled the name, or it was deleted or renamed in the current database, or it exists in a different database.@In the Form or Report's Design view, display the property sheet by clicking the Properties button, and then set the RecordSource property to an existing table or query. @1@@1 |
2581 | You must define a sort field or expression for the group header or footer in the report you tried to preview or print.@@@1@208753@1 |
2582 | “You can't set the GroupInterval property to zero when the GroupOn property is set to Interval.@Click Sorting and Grouping on the View menu and try one of the following:
|
2583 | “The ApplyFilter action or method can be carried out only from an Open macro or Open event procedure.@
|
2584 | “You can't use aggregate functions in a page header or footer.@The page header or footer of the report you tried to preview contains a calculated control with an aggregate function in its expression.@If you want to show the result of an aggregate function in a page header or footer, create a hidden calculated control in an appropriate section of the report. Then create an unbound text box in the page header or footer. If you are running a macro, use the SetValue action to set the unbound text box value to the value in the hidden control.@1@411839@1” |
2585 | This action can't be carried out while processing a form or report event.@A macro specified as the OnOpen, OnClose, OnFormat, OnRetreat, OnPage, or OnPrint property setting contains an invalid action for the property.@When you click OK, an Action Failed dialog box will display the name of the macro that failed and its arguments.@1@611909@1 |
2586 | Microsoft Access changed the MoveLayout and NextRecord properties to True from False.@The macro or Visual Basic function run by the OnFormat property of one of the sections of the report set both the MoveLayout and NextRecord properties to False. Having both properties set to False can make the report print continuously.@Revise the macro or function so that it sets these properties to the values you want.@1@604656@1 |
2587 | “Microsoft Access can't complete the Output operation.@The Visual Basic code you entered contains a syntax error or the Output procedures are not available.@Make sure there isn't a syntax error in your code. If the syntax is correct, run Setup to reinstall Microsoft Access. If you want to preserve your security or custom settings, back up the Microsoft Access workgroup information file. For information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@1@@1” |
2588 | You must select a form to save as a report.@@@1@@1 |
2589 | The expression '|' is invalid.@Aggregate functions are only allowed on output fields of the Record Source. @1@@1 |
2590 | The Var and VarP aggregate functions are not supported in an Access project.@@@1@@1 |
2600 | Verify the new password by retyping it in the Verify box and clicking OK.@@@1@@1 |
2601 | You don't have permission to read '|.'@To read this object, you must have Read Design permission for it. For more information on permissions and who can set them, click Help.@@2@410222@1 |
2602 | “You don't have permission to modify '|.'@To modify this object, you must have Modify Design permission for it. If the object is a table, you must also have Delete Data and Update Data permissions for it. For more information on permissions and who can set them, click Help.@@2@410222@1” |
2603 | You don't have permission to run '|.'@To run this object, you must have Open/Run permission for it. For more information on permissions and who can set them, click Help.@@2@410222@1 |
2604 | You can't view this object's permissions.@To view or change permissions for this object, you must have Administer permission for it. For more information on permissions and who can set them, click Help.@@2@410222@1 |
2605 | “You can't remove this user account from group '|.'@
|
2606 | The object type is invalid.@@@1@@1 |
2607 | You don't have permission to cut '|.'@To cut this object, you must have Modify Design permission for it. If the object is a table, you must also have Delete Data permission for it. For more information on permissions and who can set them, click Help.@@2@410222@1 |
2608 | You don't have permission to copy '|.'@To copy this object, you must have Read Design permission for it. If the object is a table, you must also have Read Data permission for it. For more information on permissions and who can set them, click Help.@@2@410222@1 |
2609 | You don't have permission to delete '|.'@To delete this object, you must have Modify Design permission for it. If the object is a table, you must also have Delete Data permission for it. For more information on permissions and who can set them, click Help.@@2@410222@1 |
2610 | “You must enter a personal identifier (PID) consisting of at least 4 and no more than 20 characters and digits.@Microsoft Access uses the combination of the user or group name and the PID to identify the user or group. Note that Microsoft Access hides the PID after you create it, so make sure to write down the exact user or group account name and the PID entries. If you ever have to re-create the account, you must supply the same name and PID entries.@@1@@1” |
2612 | The account name is invalid.@For information about naming conventions, click Help.@@2@210213@1 |
2613 | You don't have permission to rename '|.'@To rename a database object, you must have Modify Design permission for the object. For more information on permissions and who can set them, click Help.@@2@410222@1 |
2614 | You don't have permission to insert this form into another form.@To insert a form into another form as a subform, you must have Read Design permission for the form being inserted. For more information on permissions and who can set them, click Help.@@2@410222@1 |
2615 | You don't have permission to change the owner of '|.'@To change the owner of a database object, you must have Administer permission for it. For more information on permissions and who can set them, click Help.@@5@410222@1 |
2616 | You can't change permissions for '|.'@To change permissions for this object, you must have Administer permission for it. For more information on permissions and who can set them, click Help.@@5@410222@1 |
2617 | You don't have permission to import, export, or link to '|.'@To import, export, or link to this object, you must have Read Design and Read Data permissions for it. For more information on permissions and who can set them, click Help.@@2@410222@1 |
2618 | You need to have the database open for exclusive use to set or unset the database password.@To open the database exclusively, close the database, and then reopen it using the Open command on the File menu. In the Open dialog box, click the arrow to the right of the Open button, and then choose Open Exclusive.@@1@@1 |
2619 | You can't change permissions for '|' in a replica.@Permissions may only be changed in the Design Master for the replica set.@@3@@1 |
2620 | The password you entered in the Old Password box is incorrect.@Please enter the correct password for this account.@@1@@1 |
2621 | That password isn't valid.@You may have used a semicolon.@@1@@1 |
2622 | You can't save '|' because it is read-only.@To save, switch to Design View and choose Save As from the File menu.@@3@@1 |
2623 | Saving the database to the previous version of Access will create a new database that contains none of the security information that you have set. Are you sure you want to proceed? |
2646 | “Microsoft Access can't create this relationship and enforce referential integrity.@Data in the table '|' violates referential integrity rules.
For example, there may be records relating to an employee in the related table, but no record for the employee in the primary table.@Edit the data so that records in the primary table exist for all related records. If you want to create the relationship without following the rules of referential integrity, clear the Enforce Referential Integrity check box.@1@209086@1” |
2648 | “Microsoft Access created a one-to-one relationship instead of a one-to-many relationship because there is a unique index on the field(s) specified for the related table.@If you want to define a one-to-many relationship between these tables, try one of the following:
|
2649 | “Microsoft Access can't enforce referential integrity for this relationship.@Make sure the fields you drag are primary key fields or uniquely indexed and that the unique index or primary key is correctly set. If you want to create the relationship without following the rules of referential integrity, clear the Enforce Referential Integrity check box.@@1@209086@1” |
2650 | “Microsoft Access can't create this relationship and enforce referential integrity.@ If you want to create the relationship without following the rules of referential integrity, clear the Enforce Referential Integrity check box.@2@209086@1” |
2651 | You can't create a relationship between fields with the Memo, OLE Object, Yes/No, or Hyperlink data type.@You tried to enforce referential integrity for a relationship, but one or more of the fields you chose have the Memo, OLE Object, Yes/No, or Hyperlink data type.@Select fields in the grid that don't have these data types, or open the tables in Design view and change data types.@1@@1 |
2652 | You can't delete a relationship inherited from a linked database.@@@1@@1 |
2680 | The form or report includes more OLE objects than Microsoft Access can display at one time.@Delete some of the bound or unbound object frames.@@1@@1 |
2683 | There is no object in this control.@@@1@@1 |
2684 | The OLE object is empty.@You can't edit a bound object frame if the field in the underlying table doesn't contain an OLE object.@Embed or link an OLE object into the bound object frame using the Object command on the Insert menu.@1@109360@1 |
2685 | The object doesn't have an OLE object data type.@The bound object frame containing the object you tried to edit isn't bound to a field with the OLE object data type.@If you want to display an OLE object, set the ControlSource property for the bound object frame to a field with the OLE object data type. Or use a different control, such as a text box, to display the data.@1@109360@1 |
2686 | “Microsoft Access is unable to save the | object.@Your computer ran out of disk space while Microsoft Access was saving the OLE object. For information on freeing disk space, search the Microsoft Windows Help index for 'disk space, freeing'.@@1@@1” |
2687 | There was a problem reading the | object.@@@1@@1 |
2690 | “A system resource necessary for displaying the | object isn't available.@Your computer may be low on memory.@Close unneeded programs, and try the operation again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@1@@1” |
2691 | Microsoft Access can't communicate with the OLE server.@The OLE server may not be registered.@To register the OLE server, reinstall it.@1@@1 |
2694 | “The Clipboard isn't available.@The Clipboard may be in use by another application, or your computer may be low on memory.@If your computer is low on memory, close unneeded programs, and then try the operation again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@1@@1” |
2695 | Microsoft Access is unable to display the converted | object.@Delete the object in the bound object frame, and then re-create it.@@1@@1 |
2696 | Microsoft Access can't read the OLE object.@Delete the object in the bound object frame, and then re-create it.@@1@@1 |
2697 | There was a problem loading the | object.@The object you tried to create or edit is not a valid OLE object.@Re-create the object, and then embed or link it again.@1@109360@1 |
2698 | “The | object you tried to create or edit is too large to save.@
|
2699 | The connection with the OLE server was lost, or the OLE server encountered an error while you were using it.@Restart the OLE server, and then try the operation again.@@1@@1 |
2700 | Microsoft Access can't find an OLE server or a dynamic-link library (DLL) required for the OLE operation.@The OLE server or DLL may not be registered.@To register the OLE server or DLL, reinstall it.@1@@1 |
2701 | The OLE server for the OLE object you tried to create is already open.@Switch to the OLE server window and close it. Then try to create or edit the OLE object again.@@1@@1 |
2702 | The | object isn't registered.@The object may be calling an application that isn't installed.@To register the application, reinstall it.@1@@1 |
2703 | Microsoft Access can't read the | object because communication was interrupted.@If the OLE server application is located on a network server, make sure your computer is connected to it.@@1@@1 |
2704 | The | object you tried to edit doesn't have any displayable information.@@@2@109360@1 |
2707 | “Microsoft Access can't open the file containing the OLE object.@
|
2711 | “The file name argument in the GetObject function of the Visual Basic procedure you ran is invalid.@
|
2713 | “A problem occurred when Microsoft Access tried to access the | object.@
|
2714 | The | object doesn't support verbs that can be performed on an OLE object, such as play or edit.@Check the OLE server's documentation for information on the verbs the OLE object supports, or use the ObjectVerbs property or the ObjectVerbsCount property to find the verbs supported by an OLE object.@@1@606970@1 |
2715 | The index for the Action or the Verb property for the | object is invalid.@The setting you entered may be a negative number or may be too large.@@1@606967@1 |
2717 | The | object has no displayable information.@You tried to perform an operation on a bound or unbound object frame containing an OLE object, but the OLE object is empty.@Use the Object command on the Insert menu to create an OLE object or to embed or link an OLE object from a file that isn't empty.@1@109360@1 |
2719 | “A problem occurred while accessing the | object.@
|
2723 | The | object doesn't support the attempted operation.@The OLE object was changed to a picture, or the link to the object was broken.@If you want to perform the operation, delete the OLE object, and then embed or link it again.@1@109360@1 |
2724 | “One or more dynamic-link libraries required for using OLE objects is an incorrect version.@Run Setup to reinstall Microsoft Access. If you want to preserve your security or custom settings, back up the Microsoft Access workgroup information file. For information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@@1@@1” |
2725 | The OLE server isn't registered.@To register the OLE server, reinstall it.@@1@@1 |
2726 | “Microsoft Access can't perform the OLE operation because it was unable to read the Windows Registry where the OLE server is registered.@Reinstall the OLE server, and then try the operation again. If problems continue, reinstall Microsoft Windows and the other applications on your computer.
If you reinstall Microsoft Access, you may want to back up your Microsoft Access workgroup information file first to preserve any custom settings. For information on backing up files, search the Microsoft Windows Help index for 'backing up files'. For information on the Windows Registry, search the Microsoft Windows Help index for 'registry'.@@1@@1” |
2727 | “Microsoft Access can't perform the OLE operation because it was unable to write to the Windows Registry where the OLE server is registered.@Reinstall the OLE server, and then try the operation again. If problems continue, reinstall Microsoft Windows and the other applications on your computer.
If you reinstall Microsoft Access, you may want to back up your Microsoft Access workgroup information file first to preserve any custom settings. For information on backing up files, search the Microsoft Windows Help index for 'backing up files'. For information on the Windows Registry, search the Microsoft Windows Help index for 'registry'.@@1@@1” |
2729 | The OLE object you tried to edit is busy.@Try again later.@@1@@1 |
2730 | “There was a problem communicating with the OLE server.@Try again later. If you still can't access the object, try one or more of the following:
|
2731 | An error occurred while accessing the OLE server.@The OLE server may not be registered.@To register the OLE server, reinstall it.@1@@1 |
2732 | Microsoft Access can't read the | object.@Communication between Microsoft Access and the OLE server was interrupted.@Make sure your computer is connected to the network server on which the OLE server is located.@1@@1 |
2733 | The OLE object you tried to edit can't be accessed.@You don't have permission to change the object, or another user opened and locked the object.@@1@@1 |
2734 | You can't save the | object now.@The OLE server is running an operation, or another user opened and locked the object.@Try to save the object again later.@1@@1 |
2735 | This disk is write-protected. You can't save the | object to it.@@@1@@1 |
2737 | Microsoft Access can't find the file containing the linked OLE object you tried to update using the OLE/DDE Links command.@You may have misspelled the file name, or the file may have been deleted or renamed.@If the file has been moved to a different location, use the OLE/DDE Links command to change the source. Or delete the object, and create a new linked object.@1@@1 |
2738 | “There isn't enough memory to complete the operation.@Close unneeded programs and try the operation again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@1” |
2739 | An error occurred during the operation with an OLE object.@The object is in use.@@1@@1 |
2741 | Your computer ran out of disk space while Microsoft Access was saving the changes you made to the | object.@For information on freeing disk space, search the Microsoft Windows Help index for 'disk space, freeing'.@@1@@1 |
2742 | “Microsoft Access was unable to create more files.@Your computer may be low on memory or disk space.@Close unneeded programs and try the operation again. For information on freeing memory or disk space, search the Microsoft Windows Help index for 'memory, troubleshooting' or 'disk space, freeing'.@1@@1” |
2743 | The | object is stored in a format that is incompatible with the version of OLE on your computer.@@@1@@1 |
2744 | Microsoft Access can't find the OLE server.@The setting for the SourceDoc property may be invalid, or the file may have been deleted, renamed, or moved.@@1@606973@1 |
2745 | Share.exe or Vshare.386 is missing from your computer; OLE support needs these files to work correctly.@Rerun Microsoft Access or Microsoft Office Setup to reinstall Microsoft Access, the Share program, and Vshare.386.@If you want to preserve your security or custom settings, back up the Microsoft Access workgroup information file. Then restore the file to its original location. For information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@1@@3 |
2746 | You can't switch to Design view because your form contains too many OLE objects.@Close other applications, close the form, and then open the form again in Design view. Then delete some of the OLE objects or move them to a different form.@@1@@1 |
2747 | “The OLE server can't display the | object.@There is a problem with the file containing the OLE object, or there isn't enough memory available.@Open the OLE server outside of Microsoft Access, and then open the OLE object file.
If you can do this, then your computer may be low on memory. Close other programs, and then try the operation again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@1@@1” |
2748 | The Automation object operation isn't available for the | object.@Check the component's documentation for information on which operations are available for an Automation object.@@1@@1 |
2749 | “There isn't enough memory to complete the Automation object operation on the | object.@Close unneeded programs and try the operation again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@1” |
2750 | The operation on the | object failed.@The OLE server may not be registered.@To register the OLE server, reinstall it.@1@@1 |
2751 | The Exit or Update operation failed.@You pressed the ESC key (or another key used in the OLE server to stop an operation) while Microsoft Access was saving the changes you made to an OLE object in a form or report.@Try to exit or update again.@1@@1 |
2753 | A problem occurred while Microsoft Access was communicating with the OLE server or ActiveX Control.@Close the OLE server and restart it outside of Microsoft Access. Then try the original operation again in Microsoft Access.@@1@@1 |
2754 | “A problem occurred while Microsoft Access was communicating with the OLE server.@Try one or more of the following:
|
2755 | “There was a problem referencing a property or method of the object.@You tried to run a Visual Basic procedure that references an object property or method.@Try one or more of the following:
|
2756 | A problem occurred when Microsoft Access tried to access the OLE object.@Close the Microsoft Access form or report that displays the OLE object, and close the OLE server. Then reopen the form or report to see if it can display the OLE object.@@1@@1 |
2757 | “There was a problem accessing a property or method of the OLE object.@Try one or more of the following:
|
2758 | “There was a problem initializing the dynamic-link library Msole20 when you tried to perform the OLE operation.@
If you need to reinstall Microsoft Access, you may want to preserve your security or custom settings by backing up the Microsoft Access workgroup information file. For information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@@1@@1” |
2759 | “The method you tried to invoke on an object failed.@
|
2760 | An error occurred while referencing the object.@You tried to run a Visual Basic procedure that improperly references a property or method of an object.@@1@@1 |
2761 | There was a problem referencing a property or method of an object.@Check the component's documentation for information on the properties and methods it makes available for Automation operations.@@1@@1 |
2762 | | returned an error while referencing a property of an object.@Check the component's documentation for information on the properties and methods it makes available for Automation operations.@@1@@1 |
2763 | |1 returned the error: |2.@Check the component's documentation for information on the properties and methods it makes available for Automation operations.@@1@@1 |
2764 | The object's property or method can't be set.@You tried to run a Visual Basic procedure to set a property or apply a method for an object. However, the property or method doesn't support named arguments.@Check the component's documentation for information on the properties and methods it makes available to Automation operations.@1@@1 |
2765 | Visual Basic can't convert the data type of one of the arguments you entered.@You tried to run a Visual Basic procedure that executes a method or sets a property of an object.@Check the component's documentation for information on the properties and methods it makes available for Automation operations.@1@@1 |
2766 | The object doesn't contain the Automation object '|.'@You tried to run a Visual Basic procedure to set a property or method for an object. However, the component doesn't make the property or method available for Automation operations.@Check the component's documentation for information on the properties and methods it makes available for Automation operations.@1@@1 |
2767 | The object doesn't support American English; it was developed using a different language.@Use a version of the object developed in Visual Basic that supports the language you are using.@@1@@1 |
2768 | The number you used to reference an element in the array is outside the bounds of the array.@For example, the array is from 0 through 10, and you entered a -1 or an 11.@Check the component's documentation for information on the properties and methods it makes available for Automation operations.@1@@1 |
2769 | A property of the Automation object requires or returns a data type that isn't supported by Visual Basic.@You tried to run a Visual Basic procedure that references an Automation object's property. However, the value of the property isn't supported by Visual Basic.@Check the component's documentation for information on the properties and methods it makes available for Automation operations.@1@@1 |
2770 | The object you referenced in the Visual Basic procedure as an OLE object isn't an OLE object.@@@1@@1 |
2771 | The bound or unbound object frame you tried to edit doesn't contain an OLE object.@Use the Object command on the Insert menu to add an OLE object to the bound or unbound object frame.@@1@109360@1 |
2774 | The component doesn't support Automation.@You tried to run a Visual Basic procedure that references an Automation object.@Check the component's documentation for information on whether it supports Automation.@1@@1 |
2775 | “You specified too many arguments in the Visual Basic procedure, or there isn't enough memory to run the procedure.@Specify fewer arguments, or close unneeded programs, and then try to run the procedure again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@1” |
2777 | “The class argument in the CreateObject function of the Visual Basic procedure you're trying to run is invalid.@Try one of the following:
|
2778 | Microsoft Access tried to create an OLE link, but there was no source document for this object.@@@1@@1 |
2782 | You must specify a property or method for the object.@You tried to run a Visual Basic procedure that references and sets a property or method for the object.@Enter a property or method for the object.@1@606968@1 |
2783 | “You entered an invalid setting for the Action property.@Use one of the Microsoft Access intrinsic constants for the Action property. For a list of valid settings you can use with the Action property, click Help.@@2@606967@1” |
2784 | The path you entered for the SourceDoc property setting for a linked OLE object is too long.@Move the file to a location with a shorter path.@@1@606973@1 |
2785 | “The OLE server wasn't able to open the object.@
|
2786 | The OLE server doesn't support linking.@You tried to run a Visual Basic procedure using the Action property. However, you provided insufficient information to establish a link.@@1@@1 |
2788 | The | object isn't a linked object.@The property you tried to set in Visual Basic applies only to linked objects.@@1@@1 |
2790 | You can't embed an OLE object into a bound or unbound object frame if the OLETypeAllowed property for the bound or unbound object frame is set to Linked.@Insert a linked object, or set the OLETypeAllowed property to Embedded or Either, and then embed the object.@@1@606439@1 |
2791 | Microsoft Access can't link the OLE object or the bound or unbound object frame.@The OLETypeAllowed property for the bound or unbound object frame is set to Embedded.@Embed the object, or set the OLETypeAllowed property to Linked or Either, and then link the object.@1@606439@1 |
2792 | You can't save a locked OLE object.@@@1@@1 |
2793 | Microsoft Access can't perform the operation specified in the Action property of the Visual Basic procedure you're trying to run.@The object frame may be locked or disabled.@Set the Locked property to No and the Enabled property to Yes.@1@@1 |
2794 | The ActiveX control you tried to insert isn't registered.@For information on registering an ActiveX control, click Help.@@2@212639@1 |
2797 | This OLE object was created in an earlier version of OLE so it can't be displayed as an icon.@For an effect similar to displaying an object as an icon, add an image control to your form, and add the icon for the application to the image control. Then set the image control's OnDblClick property to a Visual Basic procedure that opens the OLE object.@@1@@1 |
2798 | You can't use the Action property to delete a bound OLE object from its underlying table or query.@You tried to run a Visual Basic procedure that deletes the object in a bound object frame by setting the Action property to acOLEDelete.@Delete the object in a different way, such as with the DAO Delete method in Visual Basic.@1@2008702@1 |
2799 | The OLE object can't be activated upon receiving the focus.@If you selected an OLE object or a chart, and the AutoActivate property for that control is set to GetFocus, the OLE object or chart should be activated automatically when it receives the focus. However, the ActiveX component doesn't support this operation.@Check the component's documentation for information on the properties and methods it makes available to Automation operations.@1@@1 |
2800 | The object is locked, so any changes you make will be discarded when the form is closed.@Click Save As/Export on the File menu and save the object under a different name.@@1@@1 |
2801 | The OLE object isn't loaded because the unbound ActiveX control hasn't been initialized.@@@1@109015@1 |
2802 | You can't insert an ActiveX control in a bound or unbound object frame.@ActiveX controls are automatically contained in ActiveX control frames.@@1@@1 |
2803 | You don't have the license required to use this ActiveX control.@You tried to open a form containing an OLE object or an ActiveX control or you tried to create an ActiveX control.@To obtain the appropriate license, contact the company that provides the licensed OLE object or ActiveX control.@1@@1 |
2804 | You can't create an ActiveX control in an unbound object frame.@ActiveX controls are automatically contained in ActiveX control frames.@@1@211711@1 |
2805 | There was an error loading an ActiveX control on one of your forms or reports.@Make sure all the controls that you are using are properly registered. For information on registering an ActiveX control, click Help.@@2@212639@1 |
2806 | Microsoft Access doesn't support this ActiveX control.@@@1@@1 |
2807 | You can't paste this object as the type you specified.@Choose another object type.@@1@@1 |
2808 | Microsoft Access can't find the Active Accessibility dynamic-link library (DLL) OleAcc.@Rerun the Microsoft Access Setup program.@@1@@3 |
2809 | An error has occurred while loading the Microsoft Access Page. Make sure you have the linked HTML file on the file system. |
2811 | Microsoft Access is unable to create the data access page. |
2812 | Microsoft Access encountered an invalid path to a data access page. You may need to re-create a Page link. |
2813 | |@The file could not be opened. It may currently be in use.@@1@@1 |
2814 | |@Unable to save the file.@@1@@1 |
2815 | |@Unable to save the file to an alternate location.@@1@@1 |
2816 | |@Unable to close the file.@@1@@1 |
2817 | Microsoft Access is unable to save (or send) the data access page. |
2818 | Microsoft Access is unable to retrieve the file: |.@Either the file is not available, or you do not have enough disk space to copy the file.@@1@@ |
2819 | Microsoft Access is unable to open the data access page. |
2821 | File in use |
2822 | Microsoft Access encountered an unexpected error while attempting to recover from a failed save (or send).@Your data access page may not be in a usable state. Please attempt to save to a different location.@@1@@ |
2823 | The Microsoft Access data access page name '|' is misspelled or refers to a Page that doesn't exist.@If the invalid Page name is in a macro, an Action Failed dialog box will display the macro name and the macro's arguments after you click OK. Open the Macro window, and enter the correct Page name.@@1@@1 |
2824 | |@You do not have adequate file permissions.@@1@@1 |
2825 | |@The file does not exist, or you do not have read access to the file.@@1@@1 |
2827 | |@File read error.@@1@@1 |
2828 | |@File write error.@The disk may be full.@1@@1 |
2832 | |@One or more files were not found, or you do not permission to delete them.@Some data access files may not have been deleted.@1@@1 |
2833 | |@An unexpected error has occurred.@@1@@1 |
2835 | |@An attempt to create this file has failed.@Please select another location and retry the operation.@1@@1 |
2837 | |@There was not enough memory.@Please close other applications and try the operation again.@1@@1 |
2838 | Microsoft Access is unable to preview the selected theme. |
2839 | |@An attempt to create a temporary file has failed.@Please confirm that you have adequate disk space on your system drive and try the operation again.@1@@1 |
2840 | |@Unable to read the list of supporting files from the data access page.@@1@@1 |
2842 | Microsoft Access encountered an error after saving (or sending) your data access page. |
2845 | Microsoft Access is unable to open the data access page from the mail envelope. |
2846 | |@The save destination is full.@Please clear space at the destination or save to another location.@1@@1 |
2847 | |@Unable to create a folder for the supporting files.@You may not have adequate permissions at the save destination.@1@@1 |
2848 | |@The maximum path length was exceeded.@Please save your data access page with a shorter name, or in a folder that is closer to the root.@1@@1 |
2849 | |@There are too many supporting files in your document.@Please remove a few supporting files from your document, and try again.@1@@1 |
2850 | |@You do not have write permission at the save destination.@@1@@1 |
2851 | |@You are saving to a server that does not support long filenames and do not have permission to create a folder.@You must have permission to create a folder at the save destination to complete this operation.@1@@1 |
2854 | Microsoft Access was unable to parse the document properties for this data access page.@They may be corrupted.@@1@@1 |
2855 | Microsoft Access was unable to delete the data access page file(s). |
2859 | Access could not load the e-mail envelope. This could be caused by a network connection problem or a problem with your Office installation.@@1@@1 |
2860 | You cannot drag a bound field to a caption or record navigation section. |
2861 | Microsoft Access is unable to preview the selected web page. |
2862 | |@The file you attempted to load was not recognized as HTML.@You may have selected the wrong file, or tried to open a database file off of a web server.@1@@1 |
2863 | |@Unable to create or load a file due to network or access permission problems.@@1@@1 |
2864 | |@This file (or a supporting file) is already in use, or has the read-only attribute set.@@1@@1 |
2865 | |@The disk is write-protected.@@1@@1 |
2866 | |@Unexpected data corruption failure.@@1@@1 |
2867 | |@Unexpected data I/O failure.@@1@@1 |
2868 | |@You cannot save this data access page over itself because it is read-only.@Please select a different file for the save.@1@@1 |
2869 | |@The file does not exist.@You do not have adequate permission to modify the data access page link to point to a valid file. Please contact the database administrator.@1@@1 |
2870 | Microsoft Access encountered an error synchronizing the HTML from the Microsoft Script Editor.@Please check the HTML for syntax errors and try again.@1@@1 |
2871 | Microsoft Access is unable to create a data access page using the codepage selected in Web Options.@The codepage may not be installed on your system.@Please install the codepage, or select a different one in Web Options.@1@@1 |
2873 | |@The filename specified is a long filename, but you have the 'use long filenames' web option turned off.@Please specify a valid short (8.3) filename.@1@@1 |
2874 | Cannot move or paste the grouping field '|' into a section at a higher group level |
2875 | |@Unable to complete the save.@The drive or network connection you attempted to save to may no longer be available.@1@@1 |
2876 | The data definition of this data access page has been corrupted and can't be repaired. You must recreate the page. Save has been disabled. |
2877 | In a Microsoft Access database (.mdb), you can't group on a control bound to a field that has a Memo or OLE Object data type. In a Microsoft Access project (.adp), you can't group on a control bound to a field that has an Image or Text data type. |
2878 | You cannot add a bound field to a caption or record navigation section. |
2879 | Caption and record navigation section cannot contain bound fields. |
2880 | Can't edit pages that contain framesets. |
2881 | This web page contains XML namespaces that may conflict with Access namespaces. You should edit the HTML source to ensure that all namespaces have a unique prefix. |
2882 | |@The folder that this Web page would use to organize supporting files is already reserved for use in the current location.@Please choose a different name or location for this Web page.@1@@1 |
2883 | A supporting file path for this data access page has been altered outside of Access.@Please save this page to a different location and ensure that all supporting files are maintained.@@1@@1 |
2884 | Some database objects cannot be located in the database since this page was designed. Use Page View of the Field List to find the references to these objects and right click the mouse to delete them or change their source. |
2885 | This page uses a database which is not supported. You will not be able to make data changes until you connect to a supported database |
2886 | Components necessary for data access pages are not installed. |
2887 | The hyperlink base specified is not a valid path or URL.@Please correct this entry.@@1@@1 |
2888 | Microsoft Access detects some HTML elements between the banner and the section of your data access page. Saving this page in Access will corrupt it. Close the page without saving it, and then edit the page in another HTML editor to remove these elements. |
2889 | This section cannot be deleted. |
2890 | You cannot edit this page because it contains frames.@The data access page designer cannot edit pages with frames.@@1@@1 |
2891 | |@You cannot save the data access page because it is in browse mode.@To save the page, switch to edit mode and try again.@1@@1 |
2892 | You can't move the group filter control to another section. Delete the group filter control from the current section and create it in a different section. |
2893 | This page was designed with a later version of the Microsoft Office Web Components than those currently installed on your machine. If you have not been prompted to install those components on this page, please contact the page author for the installation location. |
2894 | A link to this data access page could not be created because the database cannot be exclusively locked.@To create the link later, open the page by selecting 'Edit web page that already exists', and then save.@@1@@1 |
2895 | The link to the data access page specified could not be updated because the database cannot be exclusively locked.@To update the link, open this page again when you are the only person using the database.@@1@@1 |
3000 | Reserved error (|); there is no message for this error.@@@2@5363@1 |
3001 | Invalid argument. |
3002 | Could not start session. |
3003 | Could not start transaction; too many transactions already nested. |
3004 | ********** |
3005 | '|' is not a valid database name. |
3006 | Database '|' is exclusively locked. |
3007 | Cannot open library database '|'. |
3008 | The table '|' is already opened exclusively by another user, or it is already open through the user interface and cannot be manipulated programmatically. |
3009 | You tried to lock table '|' while opening it, but the table cannot be locked because it is currently in use. Wait a moment, and then try the operation again. |
3010 | Table '|' already exists. |
3011 | The Microsoft Jet database engine could not find the object '|'. Make sure the object exists and that you spell its name and the path name correctly. |
3012 | Object '|' already exists. |
3013 | Could not rename installable ISAM file. |
3014 | Cannot open any more tables. |
3015 | Index not found. |
3016 | Field will not fit in record. |
3017 | The size of a field is too long. |
3018 | Could not find field. |
3019 | Operation invalid without a current index. |
3020 | Update or CancelUpdate without AddNew or Edit. |
3021 | No current record. |
3022 | The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again. |
3023 | AddNew or Edit already used. |
3024 | Could not find file '|'. |
3025 | Cannot open any more files. |
3026 | Not enough space on disk. |
3027 | Cannot update. Database or object is read-only. |
3028 | Cannot start your application. The workgroup information file is missing or opened exclusively by another user. |
3029 | Not a valid account name or password. |
3030 | '|' is not a valid account name. |
3031 | Not a valid password. |
3032 | Cannot perform this operation. |
3033 | You do not have the necessary permissions to use the '|' object. Have your system administrator or the person who created this object establish the appropriate permissions for you. |
3034 | You tried to commit or rollback a transaction without first beginning a transaction. |
3035 | System resource exceeded. |
3036 | Database has reached maximum size. |
3037 | Cannot open any more tables or queries. |
3038 | System resource exceeded. |
3039 | Could not create index; too many indexes already defined. |
3040 | Disk I/O error during read. |
3041 | Cannot open a database created with a previous version of your application. |
3042 | Out of MS-DOS file handles. |
3043 | Disk or network error. |
3044 | '|' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. |
3045 | Could not use '|'; file already in use. |
3046 | Could not save; currently locked by another user. |
3047 | Record is too large. |
3048 | Cannot open any more databases. |
3049 | Cannot open database '|'. It may not be a database that your application recognizes, or the file may be corrupt. |
3050 | Could not lock file. |
3051 | The Microsoft Jet database engine cannot open the file '|'. It is already opened exclusively by another user, or you need permission to view its data. |
3052 | File sharing lock count exceeded. Increase MaxLocksPerFile registry entry. |
3053 | Too many client tasks. |
3054 | Too many Memo, OLE, or Hyperlink Object fields. |
3055 | Not a valid file name. |
3056 | Could not repair this database. |
3057 | Operation not supported on linked tables. |
3058 | Index or primary key cannot contain a Null value. |
3059 | Operation canceled by user. |
3060 | Wrong data type for parameter '|'. |
3061 | Too few parameters. Expected |. |
3062 | Duplicate output alias '|'. |
3063 | Duplicate output destination '|'. |
3064 | Cannot open action query '|'. |
3065 | Cannot execute a select query. |
3066 | Query must have at least one destination field. |
3067 | Query input must contain at least one table or query. |
3068 | Not a valid alias name. |
3069 | The action query '|' cannot be used as a row source. |
3070 | The Microsoft Jet database engine does not recognize '|' as a valid field name or expression. |
3071 | This expression is typed incorrectly, or it is too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables. |
3072 | | |
3073 | Operation must use an updateable query. |
3074 | Cannot repeat table name '|' in FROM clause. |
3075 | |1 in query expression '|2'. |
3076 | | in criteria expression. |
3077 | | in expression. |
3078 | The Microsoft Jet database engine cannot find the input table or query '|'. Make sure it exists and that its name is spelled correctly. |
3079 | The specified field '|' could refer to more than one table listed in the FROM clause of your SQL statement. |
3080 | Joined table '|' not listed in FROM clause. |
3081 | Cannot join more than one table with the same name (|). |
3082 | JOIN operation '|' refers to a field that is not in one of the joined tables. |
3083 | Cannot use internal report query. |
3084 | Cannot insert data with action query. |
3085 | Undefined function '|' in expression. |
3086 | Could not delete from specified tables. |
3087 | Too many expressions in GROUP BY clause. |
3088 | Too many expressions in ORDER BY clause. |
3089 | Too many expressions in DISTINCT output. |
3090 | Resultant table not allowed to have more than one AutoNumber field. |
3091 | HAVING clause (|) without grouping or aggregation. |
3092 | Cannot use HAVING clause in TRANSFORM statement. |
3093 | ORDER BY clause (|) conflicts with DISTINCT. |
3094 | ORDER BY clause (|) conflicts with GROUP BY clause. |
3095 | Cannot have aggregate function in expression (|). |
3096 | Cannot have aggregate function in WHERE clause (|). |
3097 | Cannot have aggregate function in ORDER BY clause (|). |
3098 | Cannot have aggregate function in GROUP BY clause (|). |
3099 | Cannot have aggregate function in JOIN operation (|). |
3100 | Cannot set field '|' in join key to Null. |
3101 | The Microsoft Jet database engine cannot find a record in the table '|2' with key matching field(s) '|1'. |
3102 | Circular reference caused by '|'. |
3103 | Circular reference caused by alias '|' in query definition's SELECT list. |
3104 | Cannot specify fixed column heading '|' in a crosstab query more than once. |
3105 | Missing destination field name in SELECT INTO statement (|). |
3106 | Missing destination field name in UPDATE statement (|). |
3107 | Record(s) cannot be added; no insert permission on '|'. |
3108 | Record(s) cannot be edited; no update permission on '|'. |
3109 | Record(s) cannot be deleted; no delete permission on '|'. |
3110 | Could not read definitions; no read definitions permission for table or query '|'. |
3111 | Could not create; no modify design permission for table or query '|'. |
3112 | Record(s) cannot be read; no read permission on '|'. |
3113 | Cannot update '|'; field not updateable. |
3114 | Cannot include Memo, OLE, or Hyperlink Object when you select unique values (|). |
3115 | Cannot have Memo, OLE, or Hyperlink Object fields in aggregate argument (|). |
3116 | Cannot have Memo, OLE, or Hyperlink Object fields in criteria (|) for aggregate function. |
3117 | Cannot sort on Memo, OLE, or Hyperlink Object (|). |
3118 | Cannot join on Memo, OLE, or Hyperlink Object (|). |
3119 | Cannot group on Memo, OLE, or Hyperlink Object (|). |
3120 | Cannot group on fields selected with '*' (|). |
3121 | Cannot group on fields selected with '*'. |
3122 | You tried to execute a query that does not include the specified expression '|' as part of an aggregate function. |
3123 | Cannot use '*' in crosstab query. |
3124 | Cannot input from internal report query (|). |
3125 | '|' is not a valid name. Make sure that it does not include invalid characters or punctuation and that it is not too long. |
3126 | Invalid bracketing of name '|'. |
3127 | The INSERT INTO statement contains the following unknown field name: '|'. Make sure you have typed the name correctly, and try the operation again. |
3128 | Specify the table containing the records you want to delete. |
3129 | Invalid SQL statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', or 'UPDATE'. |
3130 | Syntax error in DELETE statement. |
3131 | Syntax error in FROM clause. |
3132 | Syntax error in GROUP BY clause. |
3133 | Syntax error in HAVING clause. |
3134 | Syntax error in INSERT INTO statement. |
3135 | Syntax error in JOIN operation. |
3136 | The LEVEL clause includes a reserved word or argument that is misspelled or missing, or the punctuation is incorrect. |
3137 | Missing semicolon (;) at end of SQL statement. |
3138 | Syntax error in ORDER BY clause. |
3139 | Syntax error in PARAMETER clause. |
3140 | Syntax error in PROCEDURE clause. |
3141 | The SELECT statement includes a reserved word or an argument name that is misspelled or missing, or the punctuation is incorrect. |
3142 | Characters found after end of SQL statement. |
3143 | Syntax error in TRANSFORM statement. |
3144 | Syntax error in UPDATE statement. |
3145 | Syntax error in WHERE clause. |
3146 | ODBC—call failed. |
3151 | ODBC—connection to '|' failed. |
3154 | ODBC—could not find DLL '|'. |
3155 | ODBC—insert on a linked table '|' failed. |
3156 | ODBC—delete on a linked table '|' failed. |
3157 | ODBC—update on a linked table '|' failed. |
3158 | Could not save record; currently locked by another user. |
3159 | Not a valid bookmark. |
3160 | Table is not open. |
3161 | Could not decrypt file. |
3162 | You tried to assign the Null value to a variable that is not a Variant data type. |
3163 | The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data. |
3164 | Field cannot be updated. |
3165 | Could not open .inf file. |
3166 | Cannot locate the requested Xbase memo file. |
3167 | Record is deleted. |
3168 | Invalid .inf file. |
3169 | The Microsoft Jet database engine could not execute the SQL statement because it contains a field that has an invalid data type. |
3170 | Could not find installable ISAM. |
3171 | Could not find network path or user name. |
3172 | Could not open Paradox.net. |
3173 | Could not open table 'MSysAccounts' in the workgroup information file. |
3174 | Could not open table 'MSysGroups' in the workgroup information file. |
3175 | Date is out of range or is in an invalid format. |
3176 | Could not open file '|'. |
3177 | Not a valid table name. |
3179 | Encountered unexpected end of file. |
3180 | Could not write to file '|'. |
3181 | Invalid range. |
3182 | Invalid file format. |
3183 | Not enough space on temporary disk. |
3184 | Could not execute query; could not find linked table. |
3185 | SELECT INTO on a remote database tried to produce too many fields. |
3186 | Could not save; currently locked by user '|2' on machine '|1'. |
3187 | Could not read; currently locked by user '|2' on machine '|1'. |
3188 | Could not update; currently locked by another session on this machine. |
3189 | Table '|1' is exclusively locked by user '|3' on machine '|2'. |
3190 | Too many fields defined. |
3191 | Cannot define field more than once. |
3192 | Could not find output table '|'. |
3193 | (unknown) |
3194 | (unknown) |
3195 | (expression) |
3196 | The database '|' is already in use by another person or process. When the database is available, try the operation again. |
3197 | The Microsoft Jet database engine stopped the process because you and another user are attempting to change the same data at the same time. |
3198 | Could not start session. Too many sessions already active. |
3199 | Could not find reference. |
3200 | The record cannot be deleted or changed because table '|' includes related records. |
3201 | You cannot add or change a record because a related record is required in table '|'. |
3202 | Could not save; currently locked by another user. |
3203 | Subqueries cannot be used in the expression (|). |
3204 | Database already exists. |
3205 | Too many crosstab column headers (|). |
3206 | Cannot create a relationship between a field and itself. |
3207 | Operation not supported on a Paradox table with no primary key. |
3208 | Invalid Deleted setting in the Xbase key of the Windows Registry. |
3209 | ********** |
3210 | The connection string is too long. |
3211 | The database engine could not lock table '|' because it is already in use by another person or process. |
3212 | Could not lock table '|1'; currently in use by user '|3' on machine '|2'. |
3213 | Invalid Date setting in the Xbase key of the Windows Registry. |
3214 | Invalid Mark setting in the Xbase key of the Windows Registry. |
3215 | Too many Btrieve tasks. |
3216 | Parameter '|' specified where a table name is required. |
3217 | Parameter '|' specified where a database name is required. |
3218 | Could not update; currently locked. |
3219 | Invalid operation. |
3220 | Incorrect collating sequence. |
3221 | Invalid settings in the Btrieve key of the Windows Registry. |
3222 | Query cannot contain a Database parameter. |
3223 | '|' is invalid because it is too long, or contains invalid characters. |
3224 | Cannot read Btrieve data dictionary. |
3225 | Encountered a record locking deadlock while performing a Btrieve operation. |
3226 | Errors encountered while using the Btrieve DLL. |
3227 | Invalid Century setting in the Xbase key of the Windows Registry. |
3228 | Selected collating sequence not supported by the operating system. |
3229 | Btrieve—cannot change field. |
3230 | Out-of-date Paradox lock file. |
3231 | ODBC—field would be too long; data truncated. |
3232 | ODBC—could not create table. |
3234 | ODBC—remote query timeout expired. |
3235 | ODBC—data type not supported on server. |
3238 | ODBC—data out of range. |
3239 | Too many active users. |
3240 | Btrieve—missing Btrieve engine. |
3241 | Btrieve—out of resources. |
3242 | Invalid reference in SELECT statement. |
3243 | None of the import field names match fields in the appended table. |
3244 | Cannot import password-protected spreadsheet. |
3245 | Could not parse field names from the first row of the import table. |
3246 | Operation not supported in transactions. |
3247 | ODBC—linked table definition has changed. |
3248 | Invalid NetworkAccess setting in the Windows Registry. |
3249 | Invalid PageTimeout setting in the Windows Registry. |
3250 | Could not build key. |
3251 | Operation is not supported for this type of object. |
3252 | Cannot open a form whose underlying query contains a user-defined function that attempts to set or get the form's RecordsetClone property. |
3254 | ODBC—Cannot lock all records. |
3256 | Index file not found. |
3257 | Syntax error in WITH OWNERACCESS OPTION declaration. |
3258 | The SQL statement could not be executed because it contains ambiguous outer joins. To force one of the joins to be performed first, create a separate query that performs the first join and then include that query in your SQL statement. |
3259 | Invalid field data type. |
3260 | Could not update; currently locked by user '|2' on machine '|1'. |
3261 | Table '|' is exclusively locked by user '|2' on machine '|1'. |
3262 | Could not lock table |
3263 | Invalid Database object. |
3264 | No field defined—cannot append TableDef or Index. |
3265 | Item not found in this collection. |
3266 | Cannot append a Field that is already a part of a Fields collection. |
3267 | Property can be set only when the Field is part of a Recordset object's Fields collection. |
3268 | Cannot set this property once the object is part of a collection. |
3269 | Cannot append an Index that is already a part of an Indexes collection. |
3270 | Property not found. |
3271 | Invalid property value. |
3272 | Object is not a collection. |
3273 | Method not applicable for this object. |
3274 | External table is not in the expected format. |
3275 | Unexpected error from external database driver (|). |
3276 | Invalid database object reference. |
3277 | Cannot have more than 10 fields in an index. |
3278 | The Microsoft Jet database engine has not been initialized. |
3279 | The Microsoft Jet database engine has already been initialized. |
3280 | Cannot delete a field that is part of an index or is needed by the system. |
3281 | Cannot delete this index or table. It is either the current index or is used in a relationship. |
3282 | Operation not supported on a table that contains data. |
3283 | Primary key already exists. |
3284 | Index already exists. |
3285 | Invalid index definition. |
3286 | Format of memo file does not match specified external database format. |
3287 | Cannot create index on the given field. |
3288 | Paradox index is not primary. |
3289 | Syntax error in CONSTRAINT clause. |
3290 | Syntax error in CREATE TABLE statement. |
3291 | Syntax error in CREATE INDEX statement. |
3292 | Syntax error in field definition. |
3293 | Syntax error in ALTER TABLE statement. |
3294 | Syntax error in DROP INDEX statement. |
3295 | Syntax error in DROP TABLE or DROP INDEX. |
3296 | Join expression not supported. |
3297 | Could not import table or query. No records found, or all records contain errors. |
3298 | There are several tables with that name. Please specify owner in the format 'owner.table'. |
3299 | ODBC Specification Conformance Error (|). Report this error to the developer of your application. |
3300 | Cannot create a relationship. |
3301 | Cannot perform this operation; features in this version are not available in databases with older formats. |
3302 | Cannot change a rule while the rules for this table are in use. |
3303 | Cannot delete this field. It is part of one or more relationships. |
3304 | You must enter a personal identifier (PID) consisting of at least 4 and no more than 20 characters and digits. |
3305 | Invalid connection string in pass-through query. |
3306 | You have written a subquery that can return more than one field without using the EXISTS reserved word in the main query's FROM clause. Revise the SELECT statement of the subquery to request only one field. |
3307 | The number of columns in the two selected tables or queries of a union query do not match. |
3308 | Invalid TOP argument in select query. |
3309 | Property value is too large. |
3310 | This property is not supported for external data sources or for databases created with a previous version of Microsoft Jet. |
3311 | Property specified already exists. |
3312 | Validation rules and default values cannot be placed on system or linked tables. |
3313 | Cannot place this validation expression on this field. |
3314 | The field '|' cannot contain a Null value because the Required property for this field is set to True. Enter a value in this field. |
3315 | Field '|' cannot be a zero-length string. |
3316 | | |
3317 | One or more values are prohibited by the validation rule '|2' set for '|1'. Enter a value that the expression for this field can accept. |
3318 | Values specified in a TOP clause are not allowed in delete queries or reports. |
3319 | Syntax error in union query. |
3320 | | in table-level validation expression. |
3321 | No database specified in connection string or IN clause. |
3322 | Crosstab query contains one or more invalid fixed column headings. |
3323 | The query cannot be used as a row source. |
3324 | The query is a DDL query and cannot be used as a row source. |
3325 | Pass-through query with ReturnsRecords property set to True did not return any records. |
3326 | This Recordset is not updateable. |
3327 | Field '|' is based on an expression and cannot be edited. |
3328 | Table '|2' is read-only. |
3329 | Record in table '|' was deleted by another user. |
3330 | Record in table '|' is locked by another user. |
3331 | To make changes to this field, first save the record. |
3332 | Cannot enter value into blank field on 'one' side of outer join. |
3333 | Records in table '|' would have no record on the 'one' side. |
3334 | Can be present only in version 1.0 format. |
3335 | DeleteOnly called with non-zero cbData. |
3336 | Btrieve: Invalid IndexDDF option in initialization setting. |
3337 | Invalid DataCodePage option in initialization setting. |
3338 | Btrieve: Xtrieve options are not correct in initialization setting. |
3339 | Btrieve: Invalid IndexDeleteRenumber option in initialization setting. |
3340 | Query '|' is corrupt. |
3341 | The current field must match the join key '|' in the table that serves as the 'one' side of one-to-many relationship. Enter a record in the 'one' side table with the desired key value, and then make the entry with the desired join key in the 'many-only' table. |
3342 | Invalid Memo, OLE, or Hyperlink Object in subquery '|'. |
3343 | Unrecognized database format '|'. |
3344 | The database engine does not recognize either the field '|1' in a validation expression, or the default value in the table '|2'. |
3345 | Unknown or invalid field reference '|'. |
3346 | Number of query values and destination fields are not the same. |
3347 | Cannot add record(s); primary key for table '|' not in recordset. |
3348 | Cannot add record(s); join key of table '|' not in recordset. |
3349 | Numeric field overflow. |
3350 | Object is invalid for operation. |
3351 | The ORDER BY expression (|) includes fields that are not selected by the query. Only those fields requested in the first query can be included in an ORDER BY expression. |
3352 | No destination field name in INSERT INTO statement (|). |
3353 | Btrieve: Cannot find file Field.ddf. |
3354 | At most one record can be returned by this subquery. |
3355 | Syntax error in default value. |
3356 | You attempted to open a database that is already opened exclusively by user '|2' on machine '|1'. Try again when the database is available. |
3357 | This query is not a properly formed data-definition query. |
3358 | Cannot open the Microsoft Jet engine workgroup information file. |
3359 | Pass-through query must contain at least one character. |
3360 | Query is too complex. |
3361 | Unions not allowed in a subquery. |
3362 | Single-row update/delete affected more than one row of a linked table. Unique index contains duplicate values. |
3363 | Record(s) cannot be added; no corresponding record on the 'one' side. |
3364 | Cannot use Memo, OLE, or Hyperlink Object field '|' in the SELECT clause of a union query. |
3365 | Property value not valid for REMOTE objects. |
3366 | Cannot append a relation with no fields defined. |
3367 | Cannot append. An object with that name already exists in the collection. |
3368 | Relationship must be on the same number of fields with the same data types. |
3369 | ********** |
3370 | Cannot modify the design of table '|'. It is in a read-only database. |
3371 | Cannot find table or constraint. |
3372 | No such index '|2' on table '|1'. |
3373 | Cannot create relationship. Referenced table '|' does not have a primary key. |
3374 | The specified fields are not uniquely indexed in table '|'. |
3375 | Table '|1' already has an index named '|2'. |
3376 | Table '|' does not exist. |
3377 | No such relationship '|2' on table '|1'. |
3378 | There is already a relationship named '|' in the current database. |
3379 | Cannot create relationships to enforce referential integrity. Existing data in table '|2' violates referential integrity rules in table '|1'. |
3380 | Field '|2' already exists in table '|1'. |
3381 | There is no field named '|2' in table '|1'. |
3382 | Size of field '|' is too long. |
3383 | Cannot delete field '|'. It is part of one or more relationships. |
3384 | Cannot delete a built-in property. |
3385 | User-defined properties do not support a Null value. |
3386 | Property '|' must be set before using this method. |
3387 | Cannot find TEMP directory. |
3388 | Unknown function '|2' in validation expression or default value on '|1'. |
3389 | Query support unavailable. |
3390 | Account name already exists. |
3391 | An error has occurred. Properties were not saved. |
3392 | ********** |
3393 | Cannot perform join, group, sort, or indexed restriction. A value being searched or sorted on is too long. |
3394 | Cannot save property; property is a schema property. |
3395 | ********** |
3396 | Cannot perform cascading operation. Since related records exist in table '|', referential integrity rules would be violated. |
3397 | Cannot perform cascading operation. There must be a related record in table '|'. |
3398 | Cannot perform cascading operation. It would result in a null key in table '|'. |
3399 | Cannot perform cascading operation. It would result in a duplicate key in table '|'. |
3400 | Cannot perform cascading operation. It would result in two updates to field '|2' in table '|1'. |
3401 | Cannot perform cascading operation. It would cause field '|' to become Null, which is not allowed. |
3402 | Cannot perform cascading operation. It would cause field '|' to become a zero-length string, which is not allowed. |
3403 | Cannot perform cascading operation: '|'. |
3404 | Cannot perform cascading operation. The value entered is prohibited by the validation rule '|2' set for '|1'. |
3405 | Error '|' in validation rule. |
3406 | The expression you are trying to use for the DefaultValue property is invalid because '|'. Use a valid expression to set this property. |
3407 | The server's MSysConf table exists, but is in an incorrect format. Contact your system administrator. |
3408 | Too many FastFind Sessions were invoked. |
3409 | Invalid field definition '|' in definition of index or relationship. |
3411 | Invalid entry. Cannot perform cascading operation in table '|1' because the value entered is too large for field '|2'. |
3412 | Cannot perform cascading update on the table because it is currently in use by another user. |
3413 | Cannot perform cascading operation on table '|1' because it is currently in use by user '|3' on machine '|2'. |
3414 | Cannot perform cascading operation on table '|1' because it is currently in use. |
3415 | Zero-length string is valid only in a Text or Memo field. |
3416 | | |
3417 | An action query cannot be used as a row source. |
3418 | Cannot open '|'. Another user has the table open using a different network control file or locking style. |
3419 | Cannot open this Paradox 4.x or 5.x table because ParadoxNetStyle is set to 3.x in the Windows Registry. |
3420 | Object invalid or no longer set. |
3421 | Data type conversion error. |
3422 | Cannot modify table structure. Another user has the table open. |
3423 | You cannot use ODBC to import from, export to, or link an external Microsoft Jet or ISAM database table to your database. |
3424 | Cannot create database because the locale is invalid. |
3425 | This method or property is not currently available on this Recordset. |
3426 | This action was cancelled by an associated object. |
3427 | Error in DAO automation. |
3428 | A problem occurred in your database. Correct the problem by repairing and compacting the database. |
6000 | Errors were encountered during the save operation.@@@1@@1 |
6001 | A form or report cannot be the subdatasheet of a table or query.@Only a table or query can be inserted into another table or query.@@1@@1 |
6002 | Microsoft Access cannot expand this subdatasheet because all of the records are locked. @The RecordLocks property of the form or report or the Default Record Locking option on the Advanced tab of the Options dialog box (Tools menu) is set to All Records.@Reset the value to No Locks or Edited Record as appropriate.@1@@1 |
6003 | The setting for the Precision property must be from 1 through 28.@@@1@@1 |
6004 | The setting for the Scale property must be from 0 through 28.@@@1@@1 |
6005 | The table or query name '|' you entered in either the property sheet or macro is misspelled or refers to a table or query that doesn't exist.@If the invalid name is in a macro, an Action Failed dialog box will display the macro name and the macro's arguments after you click OK. Open the Macro window, and enter the correct name.@@1@@1 |
6006 | Filter by selection of a partial value is only supported for fields containing character data.@@@1@@1 |
6007 | Cannot open a form bound to a stored procedure in server filter by form mode.@@@1@@1 |
6008 | Microsoft Access encountered an error closing your connection. @Please close all of your application windows before trying again.@@1@@1 |
6009 | Invalid connection string.@You may need to specify a valid connection string and try it again.@@1@@1 |
6010 | Property cannot be changed when Form.Recordset has been set.@@@1@@1 |
6011 | Method cannot be called when Form.Recordset has been set.@@@1@@1 |
7700 | Microsoft Access is unable to complete the operation.@Try the operation again. If the error persists, restart Microsoft Access.@@1@@1 |
7701 | “Microsoft Access can't synchronize with Synchronizer '|1.'@A possible reason for the failure to synchronize with '|1' is that both the Synchronizer and Microsoft Access were trying to write to the current database at the same time. Try synchronizing with '|1' again.@Do you want to continue synchronizing with the remaining Synchronizers?@19@@2” |
7702 | The user-supplied function named '|', the program to assist you in resolving conflicts, could not be found.@Contact the author of this customized database application.@@1@@3 |
7703 | There are no synchronization conflicts to resolve.@@@1@@1 |
7704 | “You can't modify the design of '|' at a replica.@Design changes to replicated objects can be made only at the Design Master. Do you want to open it as read-only?@@19@@2” |
7705 | This member of the replica set has conflicts from synchronizing changes with other members.@Do you want to resolve these conflicts now?@@19@@2 |
7706 | This member of the replica set has errors from synchronizing changes with another member.@Do you want to see the errors now?@@19@@2 |
7707 | This member of the replica set has both errors and conflicts from synchronizing changes with another member.@Do you want to see the errors and resolve the conflicts now?@@19@@2 |
7708 | '|1' was the last designated Design Master for the replica set. Has '|2' been moved, renamed, deleted, or corrupted?@You should never have more than one Design Master for each replica set. Having more than one Design Master in a replica set prevents the members of the set from synchronizing correctly.@Use Windows Explorer to determine whether the file has been moved or deleted. Open the file to determine whether it has been corrupted.@13@@2 |
7709 | To make this replica the Design Master for the replica set, point to Replication on the Tools menu, click Synchronize Now, enter the path to '|' (the current Design Master), and select the Make … The Design Master check box.@@@1@@1 |
7710 | “To make this replica the Design Master for the replica set, first synchronize this replica with all other replicas in the set.@This ensures that this replica includes all design changes made at the previous Design Master. If you have already synchronized this replica, do you want to make it the Design Master?@@19@@2” |
7711 | This member of the replica set is now the Design Master. Microsoft Access will now close and reopen the database in order for the changes to take effect.@@@1@@1 |
7712 | This member of the replica set has exceeded the maximum number of days allowed between synchronizations and can't be synchronized with any other member of the replica set.@Delete this replica set member and create a new replica.@@1@@1 |
7713 | This member of the replica set will expire in | days because it hasn't been synchronized with another member of the replica set.@If the member is allowed to expire, it can no longer be synchronized with any other member of the replica set.@Synchronize with another member as soon as possible. To synchronize, point to Replication on the Tools menu, and click Synchronize Now.@1@@1 |
7714 | Microsoft Access cannot close the database at this time.@Make sure there is no Visual Basic code executing in the current database. You may need to run Setup again to properly install Briefcase Replication.@@1@@1 |
7715 | “Microsoft Access cannot complete this operation because it can't find or initialize the dynamic-link library Msrclr40.@Rerun Microsoft Access or Microsoft Office Setup again to reinstall Microsoft Briefcase Replication. During Setup, click Add/Remove, and select Microsoft Briefcase Replication.
If you want to preserve your security or custom settings, back up the Microsoft Access workgroup information file. For information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@@1@@3” |
7716 | The database must be closed prior to synchronization.@Do you want Microsoft Access to close the database and synchronize with '|'?@@19@@2 |
7717 | All open objects must be closed before synchronizing.@Do you want Microsoft Access to close the objects?@@19@@2 |
7718 | Microsoft Access can't synchronize this member of the replica set because one or more objects are open.@Because synchronizing may involve updating the data in or design of the database, all objects must be closed before you synchronize.@Close all objects and try again.@1@@1 |
7719 | You can't save design changes to '|' at a replica.@Design changes to replicated objects can be made only at the Design Master.@@1@@1 |
7720 | “You can't save design changes to '|1' at a replica.@Design changes to replicated objects can be made only at the Design Master. Do you want to save it as a new, local object?@@19@@2” |
7721 | You can't delete or rename '|' at a replica.@These operations can't be performed on a replica; they can be performed only at the Design Master.@@1@@1 |
7722 | All open objects must be closed before creating a replica.@Do you want Microsoft Access to close the objects?@@19@@2 |
7723 | Microsoft Access couldn't close one or more objects.@Close all objects manually and try again.@@1@@1 |
7724 | Microsoft Access has converted '|1' to the Design Master for the replica set.@Only the Design Master can accept changes to the database structure; however, data changes can be made at the Design Master or any replica.@@1@@1 |
7725 | Microsoft Access has converted '|1' to the Design Master for the replica set and has created a replica at '|2'.@Only the Design Master can accept changes to the database structure; however, data changes can be made at the Design Master or any replica.@@1@@1 |
7726 | Microsoft Access has created a replica at '|2'.@@@1@@1 |
7727 | Microsoft Access can't create a replica because this database is already open in exclusive mode.@Do you want Microsoft Access to close the database?@@19@@2 |
7728 | Microsoft Access can't overwrite '|': the replica can't be created at this location.@The file you are trying to overwrite may be open.@Close any other applications that might be using this file.@1@@1 |
7729 | Microsoft Access can't make a new replica at '|' because the source has the same path and file name.@Choose a different path or file name for the new replica.@@1@@1 |
7730 | The synchronization was completed successfully.@@@1@@1 |
7731 | Microsoft Access can't synchronize this member of the replica set because it is open in exclusive mode. @To open the database in shared mode, close the database, click Open Database on the File menu, and clear the Exclusive check box. Then select the database.@@1@@1 |
7732 | '|' is saved as a local table. Changes made to it won't be sent to the replicas in the set.@To make this table available to other members of the replica set, close the table, select it in the Database window, click Properties on the View menu, and then select the Replicated check box.@@1@@1 |
7733 | The synchronization request has been received, and the Synchronizer will complete the process as resources become available.@Make sure that the Synchronizer for this member of the replica set is running. It may be several minutes before the synchronization will occur.@@1@@1 |
7734 | Microsoft Access has saved the design of table '|,' but it will not be made replicable until the Table window is closed.@@@1@@1 |
7735 | Changes to this object can be made only at the Design Master.@Any changes you make will be discarded when the form is closed.@To save your changes, click Save As/Export on the File menu and save the object under a different name.@1@@1 |
7736 | Microsoft Access has deleted '|' and removed it from the replica set.@This change isn't reflected until the database is closed and reopened.@Do you want Microsoft Access to close and reopen the database now?@19@@2 |
7737 | Microsoft Access has converted '|1' to the Design Master for the replica set and has created a replica at '|2'.@The new replica will not appear in the list of potential synchronization partners until this database is closed and reopened.@Do you want Microsoft Access to close and reopen the database now?@19@@2 |
7738 | Microsoft Access has successfully created a replica at '|2'.@However, the new replica will not appear in the list of potential synchronization partners until this database is closed and reopened.@Do you want Microsoft Access to close and reopen the database now?@19@@2 |
7739 | Microsoft Access has deleted '|' and removed it from the replica set.@This change isn't reflected until the database is closed and reopened.@Please close and reopen the database when you are finished synchronizing replicas.@1@@1 |
7740 | Microsoft Access cannot synchronize with a database from a previous version.@Convert the database you are trying to synchronize with, before synchronizing.@@1@@1 |
7741 | Microsoft Access can't make a new replica at '|' because the value entered for priority is out of range.@Priority for new replicas should be in the range of 0-100.@@1@@1 |
7742 | Microsoft Access can't make a password-protected database replicable |
7743 | Backup, Restore, and Drop SQL Database operations are only available for SQL Server 7.0 running on the local machine. |
7744 | Microsoft Access can't make a new replica at '|' because the value entered for priority is out of range.@Priority for anonymous replicas should be 0.@@1@@1 |
7745 | You can't copy local objects in a replica. Design changes to replicated objects can be made only at the Design Master. |
7746 | The Database administrative components failed to load or initialize. Verify that the components are installed and registered locally. |
7747 | Database Replicas cannot be converted to prior versions of Microsoft Access. |
7748 | This stage of the conversion process is finished. To complete the conversion process, synchronize this replica to the (converted) Design Master. |
7749 | Open the Design Master and sync to this replica before opening. |
7750 | In Datasheet view, you can't set a control property if the control is part of an option group.@@@1@@1 |
7751 | In Design view, you can't retrieve the value of the ObjectPalette property for an OLE object contained in a bound object frame.@Microsoft Access doesn't display the OLE object in the object frame in Design view.@Remove the reference to the ObjectPalette property, or switch to Form view before you run the macro or Visual Basic code that references the ObjectPalette property.@1@@1 |
7752 | Microsoft Access can't apply the filter because all the records are locked.@The RecordLocks property of the form or report or the Default Record Locking option on the Advanced tab of the Options dialog box (Tools menu) is set to All Records.@Reset the value to No Locks or Edited Record as appropriate.@1@600472@1 |
7753 | |@@@1@7236@1 |
7754 | You can't move columns between two frozen columns in a datasheet.@To unfreeze all columns, click Unfreeze All Columns on the Format menu.@@1@209174@1 |
7755 | Microsoft Access can't start the Chart Wizard.@The wizard may not be installed.@To install the Chart Wizard, rerun the Microsoft Access or Microsoft Office Setup program, click Add/Remove, and then select the Wizards check box.@1@@3 |
7756 | The form can't display the What's This button if the Minimize button or the Maximize button is displayed.@Set the WhatsThisButton property to No, or set the MinMaxButtons property to None.@@1@@1 |
7757 | The form can't display the Minimize button or the Maximize button if the What's This button is displayed.@@@1@@1 |
7758 | This ActiveX control isn't enabled in Form view.@You can't set the Enabled or TabStop properties to True.@@1@@1 |
7759 | This ActiveX control isn't visible in Form view.@You can't set the Visible or TabStop properties to True.@@1@@1 |
7760 | This property is locked and can't be changed.@@@1@@1 |
7761 | An error occurred when you changed the control.@@@1@@1 |
7762 | The pattern string is invalid.@@@2@210109@1 |
7763 | This feature isn't installed.@To install this feature, rerun the Microsoft Access or Microsoft Office Setup program or, if you're using a third-party add-in, reinstall the add-in.@@1@@3 |
7764 | This feature isn't installed.@To install this feature, rerun the Microsoft Access or Microsoft Office Setup program, click Add/Remove, and then select the Wizards check box.@@1@@3 |
7765 | This feature isn't installed.@To install this feature, rerun the Microsoft Access or Microsoft Office Setup program, click Add/Remove, and then click the Advanced Wizards check box.@@1@@3 |
7766 | This control can't be changed to the type you requested.@@@1@@1 |
7767 | An error occurred while Microsoft Access was creating a section.@@@1@@1 |
7768 | In order to change data through this form, the focus must be in a bound field that can be modified.@@@1@@1 |
7769 | The filter operation was canceled. The filter would be too long.@@@1@@1 |
7770 | “Microsoft Access didn't apply the filter.@Microsoft Access may not be able to apply the filter if you entered an invalid data type in one of the fields. Do you want to close the filter anyway?@If you click Yes, Microsoft Access will build the filter, but won't apply it to the recordset. Then it will close the Filter By Form window.@19@@2” |
7771 | You can't set the ColumnOrder property when you are in Form view or Print Preview.@@@1@@1 |
7773 | Microsoft Access can't set the LimitToList property to No right now.@The first visible column, which is determined by the ColumnWidths property, isn't equal to the bound column.@Adjust the ColumnWidths property first, and then set the LimitToList property.@1@600929@1 |
7774 | You can't set the MenuBar property while an OLE object is in-place active.@@@1@@1 |
7775 | There are too many controls on the form to allow Filter By Form.@@@1@@1 |
7777 | You've used the ListIndex property incorrectly.@@@2@606997@1 |
7778 | You can't save an object when you are in the Filter By Form window.@Switch to Form view, and then save the object.@@1@@1 |
7779 | You can't set a form's MenuBar property from its menu bar macro.@Right-click the Form selector button (located to the left of the horizontal ruler) on the form in Design view. Click Properties, click the Other tab, and then set the MenuBar property.@@1@@1 |
7780 | You're trying to insert into a section that can't grow enough for the control you're trying to add.@The maximum total height for all sections in a report, including the section headers, is 200 inches (508 cm).@Remove, or reduce the height of, at least one section. Then try to add the control again.@1@@1 |
7782 | You can't create a new instance of this form or report while it is in Design view.@@@1@@1 |
7784 | You can't open a form or report while it is being designed as a subform or subreport. |
7785 | “Microsoft Access didn't build the filter.@There is an error in the current field. Do you want to close the filter anyway?@If you click Yes, Microsoft Access will undo the changes to the filter, and then close the Filter By Form window.@19@@2” |
7788 | Compile error.@@@1@@1 |
7789 | Type mismatch.@@@1@@1 |
7790 | Microsoft Access can't create the |1.@Either there was an error getting information from the table or query you selected, or a new |2 could not be created.@@1@@1 |
7791 | There was an error creating your |1.@Some fields may have been skipped because there was an error getting information about them or because they didn't fit on the |2.@@1@@1 |
7792 | You can't open a subform when it is also open in Design view.@@@1@@1 |
7793 | You must save the form '|' before you can embed it.@@@1@@1 |
7794 | Microsoft Access couldn't find the toolbar '|'.@@@1@@1 |
7795 | The custom toolbar '|' is the wrong type (menu, shortcut menu, or toolbar) for the property it's being used in.@@@1@@1 |
7796 | The process failed because there is no printer installed.@Because Microsoft Access saves the printer settings with each form or report, a printer is needed to convert, enable, copy and paste, import, or export your forms or reports. To install a printer, point to Settings on the Windows Start menu, click Printers, and then double-click Add Printer. Follow the instructions in the wizard.@@1@@1 |
7797 | You must save new objects in the database before you can save them to this external format.@@@1@@1 |
7798 | You can only save select, crosstab, and union queries to this format.@@@1@@1 |
7799 | This form or report is based on a query that exceeds the limit for data in a single record.@Exclude any unnecessary fields from the query, or change some of the field types to Memo in the original tables.@@1@@1 |
7800 | You can't create a Microsoft Access MDE database from a database in an old format.@Close the database and convert it to the current version of Microsoft Access. Then create the MDE database.@@1@@1 |
7801 | This database is in an unrecognized format.@The database may have been created with a later version of Microsoft Access than the one you are using. Upgrade your version of Microsoft Access to the current one, then open this database.@@1@@1 |
7802 | That command isn't available in an MDE database.@@@1@@1 |
7803 | Microsoft Access can't rename |1 to |2. The convert operation failed.@@@1@@1 |
7804 | “Microsoft Access can't open this replica created with a previous version of Access.@Do one of the following:
|
7805 | This is already an MDE database.@@@1@@1 |
7806 | This database does not have a Visual Basic project, so it can't be made into an MDE file.@Open the database in Microsoft Access to create the Visual Basic project.@@1@@1 |
7807 | You can't make the open database into an MDE file while running a macro or Visual Basic code.@Instead of using a macro or code, on the Tools menu, point to Database Utilities, and then click Make MDE File.@@1@@1 |
7808 | Microsoft Access can't replace an existing file as a result of converting the Microsoft Access database. You must select a new file name.@@@1@@1 |
7809 | You can't rename a | object in the client/server version of Microsoft Access.@@@1@@1 |
7810 | You can't compact the open database while running a macro or Visual Basic code.@Instead of using a macro or code, on the Tools menu, point to Database Utilities, and then click Compact/Repair Database.@@1@@1 |
7811 | Microsoft Access requires SQL Server 6.5 or later for Access projects. You need to upgrade the selected SQL database to SQL Server 6.5 or later.@@@1@@1 |
7812 | Microsoft Access projects can only be connected to Microsoft SQL Server |
7813 | Restoring a database requires that no one is currently using the database.@Do you want to close all objects, select a backup file, and restore the database from backup.@@1@@1 |
7814 | Dropping a database requires that no one is currently using the database.@Do you want to close all open objects, and drop the database.@@1@@1 |
7815 | Microsoft Access was unable to create an ADE database.@@@1@@1 |
7816 | Microsoft Access requires this SQL 6.5 installation to be upgraded to SP5 in order to successfully connect to this server. @@@1@@1 |
7817 | The database file '|' is already open. You cannot encrypt to an open file.@@@1@@1 |
7818 | Microsoft Access was unable to create the Database window.@Please upgrade to a newer version of Microsoft Internet Explorer.@@1@@1 |
7819 | You have chosen a database template file that is not supported in the current version of Microsoft Access.@To create a database using the Database Wizard, click the Databases tab in the New dialog box and then double-click a database icon.@@1@@1 |
7850 | “Microsoft Access can't find the wizard, or there is a syntax error in the Declarations section of a Visual Basic module.@ The wizard you need may be missing from the Libraries key of the Microsoft Access section of the Windows Registry.@To make sure that the wizard is in the Windows Registry, run Setup to reinstall Microsoft Access, and then compile all Visual Basic modules in the database.@1@@3” |
7851 | The toolbar name '|' you entered already exists.@Enter a unique name for this toolbar.@@1@@1 |
7852 | The toolbar name '|' you entered doesn't follow Microsoft Access object-naming rules.@For more information about naming objects, click Help.@@2@611734@1 |
7853 | The default column width must be at least 0.1 inch.@@@1@@1 |
7854 | You can't export database objects (except tables) from the current version of Microsoft Access to earlier versions of Microsoft Access.@@@1@@1 |
7855 | You must have a database open to create custom toolbars, and the database can't be read-only.@@@1@@1 |
7856 | '|' cannot be imported, exported, or copied to Access project files.@@@1@@1 |
7858 | The Tab Width setting in the Options dialog box (Tools menu) for the Module or Debug window must be from 1 through 32.@@@1@@1 |
7859 | Microsoft Access can't start because there is no license for it on this machine. |
7860 | The profile '|' that you specified on the command line doesn't exist in the Windows Registry.@@@1@@1 |
7861 | '|' cannot be imported, exported, or copied to Access database files.@@@1@@1 |
7862 | Microsoft Access can't find the wizard, or there is an incorrect setting in the Windows Registry.@Rerun Microsoft Access or Microsoft Office Setup to reinstall the wizards. If the missing wizard is not a Microsoft Access wizard, reinstall it using the Add-in Manager.@@1@@3 |
7863 | Links can only be created between Microsoft Access database files. |
7864 | Microsoft Access doesn't allow empty strings.@@@1@@1 |
7865 | There is already an existing database with the name you entered. Give the new database a unique name. |
7866 | Microsoft Access can't open the database because it is missing, or opened exclusively by another user. |
7867 | You already have the database open. |
7868 | You can't use a SetMenuItem macro action on a default menu.@SetMenuItem is for custom menus only.@@1@@1 |
7869 | The SetMenuItem action does not have enough information to be carried out.@An argument is invalid, or there are not enough arguments.@@1@@1 |
7870 | Microsoft Access can't find the database '|.'@Check the database name (and path, if specified) to make sure you entered it correctly.@@1@@1 |
7871 | The table name you entered doesn't follow Microsoft Access object-naming rules.@For more information about naming objects, click Help.@@2@611734@1 |
7872 | This recordset is not updatable. |
7873 | '|' cannot be imported, exported, or copied to another database or project file.@@@1@@1 |
7874 | “Microsoft Access can't find the object '|.'@
|
7875 | The table '|' already exists.@You created or renamed a table, and then tried to save it. Before Microsoft Access could save the table, another user created or renamed one using the same name.@@1@@1 |
7876 | “There isn't enough temporary disk space to complete the operation.@Free disk space, and then try the operation again.
For more information on freeing temporary disk space, search the Microsoft Windows Help index for 'disk space, freeing'. For information on compacting a database to free disk space, click Help.@@2@209009@3” |
7877 | Microsoft Access can't sort on the Memo, OLE Object, or Hyperlink '|'.@The ORDER BY clause of an SQL statement can't include any Memo, OLE Object, or Hyperlink fields.@@1@@1 |
7878 | The data has been changed.@Another user edited this record and saved the changes before you attempted to save your changes.@Re-edit the record.@1@@1 |
7879 | An invalid IDA has been passed to Microsoft Access error handling.@Please report this error and the steps that caused it.@@1@@1 |
7880 | The value you entered is the wrong data type for this field.@Enter an integer.@@1@@1 |
7881 | “The Macro Conversion Wizard can't be started.@This wizard may not be installed.@Rerun Microsoft Access or Microsoft Office Setup to reinstall this wizard. If you want to preserve your security or custom settings, back up the Microsoft Access workgroup information file. For more information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@1@@3” |
7882 | You can't convert, enable, or encrypt an Access Project file.@@@1@@1 |
7883 | You can't set the MenuBar property unless a database is open.@@@1@@1 |
7884 | You can't export an object to itself.@Select a different database to export to, or give the object a new name.@@1@@1 |
7885 | The source database has no import/export specifications to copy.@@@1@@1 |
7886 | Microsoft Access can't find the dynamic-link library (DLL) Mso9.@Rerun the Microsoft Access or Microsoft Office Setup program.@@1@@3 |
7887 | A unique record identifier can't consist of more than 10 fields.@@@1@@1 |
7888 | You must set the default font size to a number from |1 through |2.@For more information on the FontSize property, click Help.@@2@612551@1 |
7889 | The file '|' does not exist.@@@1@@1 |
7890 | The file '|' doesn't contain any data.@You can't import from, or link to, an empty spreadsheet.@@1@@1 |
7891 | This database is read-only.@The conditional compilation argument option can't be saved.@@1@@1 |
7892 | An error occurred while saving module options.@You may be running Visual Basic in break mode.@Reset the running code before changing the module options.@1@@1 |
7893 | You can't import objects into a database created in an earlier version of Microsoft Access.@Convert the database to the current version of Microsoft Access using the Convert Database command (Tools menu, Database Utilities submenu).@@1@209029@1 |
7895 | “Microsoft Access was unable to create a window.@The system is out of resources or memory.@Close unneeded programs and try again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@1@@3” |
7896 | Error '|' in the validation rule.@@@2@600687@1 |
7897 | Error '|' in the default value.@@@2@602264@1 |
7898 | Execution of this application has stopped due to a run-time error.@The application can't continue and will be shut down.@@1@@3 |
7899 | Microsoft Access can't be started.@Microsoft Access was unable to initialize the Windows Registry.@Rerun Microsoft Access or Microsoft Office Setup to reinstall Microsoft Access.@1@@3 |
7900 | Microsoft Access can't convert the database because it can't create an error table.@@@1@@1 |
7901 | Microsoft Access can't convert the database because it can't write to the error table.@@@1@@1 |
7902 | Errors occurred converting |1 validation rules and default values.@See error table '|2' for a list of errors.@@1@@1 |
7903 | Microsoft Access can't insert this field.@There are too many fields in the table. The limit is 255.@@1@@1 |
7904 | An error occurred in the Field Builder.@You've replaced or modified the default Field Builder, and Microsoft Access is unable to run the new version. Reinstall Microsoft Access to correct the error.@@1@@1 |
7905 | Microsoft Access can't change these field data types.@Some data in this table violates the record validation rule.@Before any data types can be changed, remove the record validation rule or correct the data.@1@@1 |
7906 | Microsoft Access couldn't launch the Lookup Wizard.@Rerun the Microsoft Access or Microsoft Office Setup program, click Add/Remove, and select the Wizards check box.@@1@@1 |
7907 | You don't have permission to modify the design of this table.@For more information on permissions and who can set them, click Help.@@2@410222@1 |
7908 | You can't modify this table now because someone else is using it.@@@1@@1 |
7909 | Microsoft Access can't add another column to this table.@You can have up to 255 columns in your table.@@1@@1 |
7910 | Microsoft Access can't delete this column.@Tables must have at least one column.@@1@@1 |
7911 | Microsoft Access can't delete this index.@This table participates in one or more relationships.@Delete its relationships in the Relationships window first.@1@@1 |
7912 | Once you save the change to the data type of this column, you will not be able to change back to the previous data type.@Are you sure you want change the data type?@@20@@2 |
7913 | You can't change a random-valued AutoNumber field to an incremental AutoNumber field.@The values of random-valued AutoNumber fields aren't continuous.@@1@@1 |
7914 | You can't convert ReplicationID values to other data types.@@@1@@1 |
7915 | You can't delete the field '|'; it is a replication system field.@Use a make-table query to create a new table that contains all the fields in the table except system fields. For information on make-table queries, click Help.@@2@209993@1 |
7916 | Microsoft Access is unable to start the Lookup Wizard.@The Lookup Wizard doesn't apply to fields of this data type.@@1@@1 |
7917 | '|' can not be opened due to a dropped server connection.@@@1@@1 |
7918 | The Object Name argument for the 'Save' macro action is not supported within an Access Project for Table or Query objects.@You cannot save these objects with a new name in an Access Project.@@1@@1 |
7950 | You can't refer to the RecordsetClone property of a form when the form is open in Design view.@@@1@607393@1 |
7951 | You entered an expression that has an invalid reference to the RecordsetClone property.@For example, you may have used the RecordsetClone property with a form or report that isn't based on a table or query.@@1@607393@1 |
7952 | You made an illegal function call.@Check the syntax of the function you are trying to use.@@1@@1 |
7953 | “The value you entered doesn't match the type required.@
|
7954 | “The expression you entered requires the control to be in the active window.@Try one of the following:
|
7955 | There is no current code context object.@@@1@@1 |
7956 | The syntax of the subquery in this expression is incorrect.@Check the subquery's syntax and enclose the subquery in parentheses.@@2@209989@1 |
7957 | You used a Like operator with an incorrect pattern.@Make sure the comparison value is enclosed in quotation marks.@@1@1008961@1 |
7958 | The Replication ID you entered is invalid.@Make sure the Replication ID you enter contains only digits or letters for hexadecimal numbers, that the Replication ID is the correct length, and that it is in a canonical SQL form.@@1@@1 |
7959 | The expression contains an ambiguous name.@You may have two or more functions with the same name in different modules.@Rename the functions so that each one has a unique name.@1@@1 |
7960 | There was an error compiling this function.@The Visual Basic module contains a syntax error.@Check the code, and then recompile it.@1@@1 |
7961 | Microsoft Access can't find the module '|' referred to in a macro expression or Visual Basic code.@The module you referenced may be closed or may not exist in this database, or the name may be misspelled.@@1@@1 |
7962 | The index number you used to refer to the module is invalid.@Use the Count property to count the open modules and make sure that the module number is not greater than the number of open modules minus 1.@@1@@1 |
7963 | Microsoft Access can't run the macro or callback function '|'.@Make sure the macro or function exists and takes the correct parameters.@@1@@1 |
7964 | You entered an expression that has an invalid reference to the Recordset property.@You can only use a dynaset or snapshot recordset to set this property.@@1@607393@1 |
7965 | The object your entered is not a valid Recordset property.@For example, you may have used a forward-only recordset, or tried to set it to null.@@1@607393@1 |
7966 | The format condition number you specified is greater than the number of format conditions.@Use the Count property to count the format conditions for the control and then check that the format condition number you cite is within the range of existing format conditions.@@1@@1 |
7967 | A required minimum or maximum value is missing.@@@1@@1 |
7968 | The format condition Type you specified is invalid.@Valid values for the Type property are 0 to 2 for the first condition, and 0 to 1 for all other format conditions.@@1@@1 |
7969 | The format condition Operator you specified is invalid.@Valid values for the Operator property are 0 to 7.@@1@@1 |
7970 | Microsoft Access can't open the file '|.'@It may not be a database, or it may be a database you are unable to open.@@1@@1 |
7971 | Microsoft Access can't follow the hyperlink to '|'.@Please verify the destination.@@1@@1 |
7972 | Microsoft Access encountered an error while trying to show the Hyperlink dialog.@@@1@@1 |
7973 | The hyperlink address or subaddress text you entered was too long for Microsoft Access to store.@The text was truncated to fit in the available space, so the link may not work as expected.@@1@@1 |
7974 | Microsoft Access failed to insert a hyperlink at the current location.@@@1@@1 |
7975 | You chose an invalid control type for use with hyperlinks.@You can only use hyperlinks with labels, images, command buttons, or bound text boxes.@@1@@1 |
7976 | There is no stored hyperlink in this control.@@@1@@1 |
7977 | Microsoft Access is unable to paste the data on the clipboard as a hyperlink.@@@1@@1 |
7978 | Microsoft Access is unable to add the current hyperlink to the favorites folder.@@@1@@1 |
7979 | You can't use the hyperlink property builder with more than one control selected.@@@1@@1 |
7980 | The HyperlinkAddress or HyperlinkSubAddress property is read-only for this hyperlink.@@@1@@1 |
7981 | The values for 'File or web page name' and/or 'Text to Display' are too long.@The values will be truncated. To keep your original values, click Cancel in the Edit Hyperlink dialog.@@1@@1 |
7982 | An error occurred while saving the output of the form.@@@1@@1 |
7983 | Microsoft Access can't follow the hyperlink because it couldn't create the hyperlink object.@@@1@@1 |
7990 | You entered an invalid project name.@You may have deleted the default project name and forgotten to specify a new one.@@1@@3 |
7991 | The Microsoft Access Source Code Control Add-in is not available; this object will be opened read-only.@@@1@@3 |
7992 | The Microsoft Access Source Code Control Add-in could not be started.@@@1@@3 |
7993 | The object | is currently checked in and is therefore read-only.@To modify the object, close it first, then check it out and reopen it.@@1@@1 |
7994 | There was a problem communicating with the Source Code Control Add-in.@@@1@@3 |
7995 | The menus on your form or report that are based on Microsoft Access macros will not be visible while the Customize dialog box is open.@To have the full power of menu or toolbar customization, convert your macro-based menus to menus or toolbars. With the macro selected in the Database window, point to Macro on the Tools menu, and create a menu, a toolbar, or a shortcut menu from that macro.@@1@@1 |
7996 | Microsoft Access couldn't create the Data and Misc. Objects because the linked table '|' could not be found.@To create the Data and Misc. Objects, use the Linked Table Manager (Tools menu, Add-ins submenu) to update the link to the source table or file, or delete the link from your current database.@@1@@1 |
7997 | You can't save the standard module '|' over a class module with the same name.@Save the standard module to a different name, or delete the class module first.@@1@@1 |
7998 | You can't save the class module '|' over a standard module with the same name.@Save the class module to a different name, or delete the standard module first.@@1@@1 |
7999 | Microsoft Access can't delete this relationship because you don't have the Data and Misc. Objects checked out.@Check out the Data and Misc. Objects and then delete the relationship.@@1@@1 |
8000 | The name you entered already exists for another object of the same type in this database.@Do you want to replace the existing |?@@20@@2 |
8001 | “'|' has been changed since the last time you opened it, either by another user or because another instance of it was opened on your own machine.@Do you want to replace the changes that you or another user made?@
|
8002 | “'|' has been changed since the last time you opened it, either by another user or because another instance of it was opened on your own machine.@Do you want to replace the changes that you or another user made?@ |
8003 | You must save a table or query before you can create a new object based on it.@Do you want to save and use the table or query to create a new object?@@13@@2 |
8004 | “The layout of '|' has been changed by another user on your network since the last time you opened it.@Do you want to replace the other user's changes with your changes?
|
8005 | You can't save this object.@You must have Administer permission for the Database object in order to save modules, forms, or reports in a Design Master.@@1@@1 |
8006 | The name you entered already exists for another object of the same type in this database.@Do you want to replace the existing |? You will not be able to undo this operation.@@20@@2 |
8007 | You cannot get into Exclusive Mode right now because this database is opened by other users or because you do not have permissions to open exclusively.@@@1@@1 |
8008 | The stored procedure executed successfully but did not return records. |
8050 | Do you want to save changes to the design of |?@@@13@@2 |
8051 | Do you want to save changes to |?@@@19@@2 |
8052 | Do you want to delete the | and empty the Clipboard?@You tried to delete a database object that is currently on the Microsoft Access Clipboard. If you delete it from your database, you won't be able to paste it later.@@20@@2 |
8053 | Do you want to delete the |?@For more information on how to prevent this message from displaying every time you delete an object, click Help.@@21@209058@2 |
8054 | Do you want to exit Microsoft Access and empty the Clipboard?@@@19@@2 |
8055 | Microsoft Access can't change the working directory to '|.'@Verify that the drive is valid and the path is 260 characters or less in length.@@1@@1 |
8057 | | |
8058 | Do you want to save changes to the layout of |?@@@13@@2 |
8059 | Do you want to remove the link to the |?@If you delete the link, you delete only the information Microsoft Access uses to open the table, not the table itself.@@19@@2 |
8060 | The toolbar '|' is partly unreadable.@ Microsoft Access can't display all the toolbar buttons. The specified toolbar may be in a different format than the toolbars in the current version of Microsoft Access.@Click OK to close the dialog box, and then add the buttons missing from the toolbar. Microsoft Access will then update the toolbar to the latest format.@1@210064@1 |
8061 | “Are you sure you want to restore the default settings to the built-in toolbar or menu bar |?@If you previously customized, moved, changed the visibility, or otherwise altered the toolbar or menu bar, or any of the menus that cascade from it, Microsoft Access removes your changes, returns the original buttons to their original order, and shows or hides the toolbar based on the original setting. To return the built-in toolbar or menu bar to its original state, click Yes.@@19@@2” |
8063 | “The source application isn't responding. Do you want to continue waiting?@The DDE channel is established, but the data exchange wasn't completed in the amount of time specified in the OLE/DDE Timeout setting in the Options dialog box (Tools menu).@
|
8064 | “This linked table has indexes that use an unsupported sort order.@If you modify this table, the Microsoft Jet database engine can't correctly maintain the table's indexes. As a result, your data may appear in the wrong order, and functions that use the table's indexes may have unexpected results.@Try one of the following: |
8065 | You can't delete the table '|' until its relationships to other tables have been deleted.@Do you want Microsoft Access to delete the relationships now?@@19@@2 |
8067 | Do you want to permanently delete the |?@If you click Yes, you won't be able to undo the deletion.@@19@@2 |
8069 | Microsoft Access couldn't create the custom toolbar '|.'@@@1@@3 |
8071 | Would you like to remove the compacted database from Source Code Control?@@@19@@2 |
8072 | Microsoft Access must close the | in order to complete this operation.@Would you like Microsoft Access to close it now?@@19@@1 |
8073 | You do not have the | checked out.@Microsoft Access can't check out an object while it is open, and you can't make design changes until you check it out.@If you want to make design changes to this object, first close it, check it out, and then reopen it.@1@@1 |
8074 | Microsoft Access must save the | in order to complete this operation.@Would you like Microsoft Access to save it now?@@19@@1 |
8075 | You do not have the Data and Misc. Objects checked out. You can't create a new table or save a link to a WebPage.@@@1@@1 |
8076 | To import tables, relationships, menus, toolbars, or import/export specs you must have the Data and Misc. Objects checked out.@@@1@@2 |
8077 | Are you sure you want to cut the |?@You will not be able to undo this operation.@@19@@2 |
8078 | This object will be removed from your local database, but not from source code control.@The next time you get this database from source code control, the object will reappear. Are you sure that you want to delete the local object?@@20@@2 |
8079 | Microsoft Access was not able to add a reference to the type library for this control because Data and Misc. Objects is not checked out.@Check out the Data and Misc. Objects and add a reference to the library '|'.@@1@@1 |
8080 | An error occurred while trying to create the linked table '|'.@Check to make sure that the source table or file is available, and then retry the operation on the Data and Misc. Objects.@@1@@1 |
8081 | You have set |1's Type property to Popup, which changes the toolbar to a shortcut menu.@The shortcut menu disappears because Microsoft Access adds |2 to the Shortcut Menus toolbar. To complete the shortcut menu, close the Toolbar Properties sheet, display the Shortcut Menus toolbar, click the Custom category, and then add the commands you want.@@1@@1 |
8082 | Microsoft Access must save the | to the current database in order to complete this operation.@Would you like Microsoft Access to save it now?@@19@@2 |
8086 | An error occurred trying to add one or more references from the source code control project.@The library may not be registered on your computer. Check your project references and add any missing references after registering the missing components that this database requires.@@1@@1 |
8087 | Restoring a database requires that no one is currently using the database.@Do you want to close all objects, select a backup file, and restore the database from backup?@@19@@2 |
8088 | Dropping a database requires that no one is currently using the database.@Do you want to close all open objects, and drop the database?@@19@@2 |
8090 | Are you sure you want to delete the conflict table |?@You will not be able to undo this operation.@@19@@2 |
8091 | This database is enabled for publication.@Do you want to delete existing publications and drop the database?@@19@@2 |
8092 | “Access could not save your project.@Do you want to cancel the close operation? |
8093 | Create a message that points to your saved data access page?@To create an e-mail message that points to a page you have saved to an absolute path (a URL, or a UNC path such as serversharepathfilename), click Yes. This option is generally more secure. To create an e-mail message that contains a copy of the page, click No. The copy won't be allowed to connect to data across domains unless the recipient or administrator has changed default Internet Web content zone security settings.@@16@@4 |
8094 | Create a message that contains a copy of your data access page?@To create a message that contains a copy of your data access page, click OK. The copy you create won't be allowed to connect to data across domains unless the recipient or administrator has changed default Internet Web content zone security settings. Sending an e-mail message that points to a page you have saved to an absolute path (a URL, or a UNC path such as serversharepathfilename) is generally more secure. To send a message that points to a page saved to an absolute path, click Cancel. Save the page to a server or public share, and then resend the e-mail message displaying your page.@@6@@4 |
8400 | The database '|' is read-only.@You won't be able to save changes made to data or object definitions in this database.@@1@209033@1 |
8401 | You can't make changes to the database objects in the database '|.'@This database was created in an earlier version of Microsoft Access.@To convert this database to the current version of Microsoft Access, close the database, point to Database Utilities on the Tools menu, and then click Convert Database.@1@209029@1 |
8402 | “The file '|' already exists.@Do you want to replace the existing file? If you want to compact or convert to a different file name, click No. Enter the new file name after the /compact or /convert option in the command line, and run the command again.@@20@@2” |
8403 | “The setting you entered is invalid.@The database's sort order can't be updated. The setting you entered in the New Database Sort Order option of the Options dialog box (Tools menu) isn't a valid sort order for the version of the database you are compacting.@@1@@1” |
8404 | You can't open '|' for exclusive use because another user has the database open or because you do not have permissions to open exclusively.@Microsoft Access will open the database for shared access.@@1@@1 |
8405 | You can't make changes to the database objects in the database '|.'@This database was created in an earlier version of Microsoft Access.@To convert this database to the current version of Microsoft Access, close the database, point to Database Utilities on the Tools menu, and then click Convert Database.@1@@1 |
8406 | Does the first row of your data contain column headings?@@@20@@1 |
8407 | This database is a replica created in a previous version of Microsoft Access.@You can view objects in this database, but you can't modify their design. If you want to modify objects in this database, convert the Design Master for this replica set to the current version of Microsoft Access and synchronize this replica.@Do you want to open the database anyway?@19@@1 |
8408 | The name you entered already exists for another custom group in this database.@Do you want to replace the existing custom group |? You will not be able to undo this operation.@@20@@2 |
8409 | Microsoft Access has made a backup of database |1 at |2. Note: Only server-related objects have been backed up. To protect other objects, back up the .ADP file manually |
8410 | Microsoft Access successfully restored database |1 from its backup at |2 |
8411 | Do you want to permanently delete the custom group '|'?@If you click Yes, all shortcuts in the custom group will be deleted as well, and you won't be able to undo the deletion.@@20@@2 |
8412 | The name you entered already exists for another shortcut in this group. @Do you want to replace the existing shortcut '|?'@@20@@2 |
8413 | The project '|' is read-only.@You won't be able to save changes made to object definitions in this project.@@1@209033@1 |
8500 | “A form with a subform object can't have its DefaultView property set to Continuous Forms.@You tried to add a subform to a form in Design view. Microsoft Access will reset the property to Single Form.@@1@@1” |
8501 | You can't modify this field because it is read-only.@Some fields, such as a calculated field, are read-only by design. However, any field can be read-only if its Locked property is set to Yes.@@1@600865@1 |
8502 | Microsoft Access has reached the end of the records.@Do you want to continue searching from the beginning?@@19@@2 |
8503 | Microsoft Access has reached the beginning of the records.@Do you want to continue searching from the end?@@19@@2 |
8504 | Microsoft Access finished searching the records. The search item was not found.@@@1@@1 |
8505 | Do you want to continue to search or replace?@@@19@@2 |
8506 | “There isn't enough memory to save the current filter.@Close unneeded programs. Return to the form or datasheet, and then redefine and reapply the filter. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@3” |
8507 | “There isn't enough memory to execute the macro that updates the active filter.@Microsoft Access is closing the Filter window.
Close unneeded programs. Then try again to open the Filter window. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@3” |
8508 | Microsoft Access can't find '|.'@The text string you entered in the Find What box can't be evaluated against the current field.@Reenter the text string so that it conforms to the data type of the field.@1@@1 |
8509 | “You won't be able to undo this Replace operation.@There isn't enough free memory to use the Undo command. Do you want to continue?@@19@@2” |
8510 | Microsoft Access can't save the current record.@Do you want to undo the changes to the record and continue the Paste operation?@@19@@2 |
8511 | “Records that Microsoft Access was unable to paste have been inserted into a new table called '|.'@In the Database window, open the new table to see the unpasted records. After you fix the problems that resulted in the paste errors, copy and paste the records from the new table.@@1@@1” |
8512 | “None of the field names you pasted onto the Clipboard match the field names on the form.@Microsoft Access treats the data in the first row on the Clipboard as field names. If you copied the data from another application, the first row of data may have taken the place of the field names. Do you want to paste the field names in the order you defined with the Tab Order command?@@21@311022@2” |
8513 | “Some of the field names for the data you tried to paste don't match field names on the form.@Microsoft Access treats data in the first row on the Clipboard as field names. In this case, some of those field names don't match the field names on the form. Do you want to paste only that data whose names match the field names on the Clipboard?@@19@311022@2” |
8514 | Do you want to suppress further error messages telling you why records can't be pasted?@If you click No, a message will appear for every record that can't be pasted.@@13@@2 |
8515 | “You copied a large amount of data onto the Clipboard.@When you copy data onto the Clipboard, only the reference to the object is copied. If you close the source document, however, Microsoft Access must paste all the data from its source. Depending on the amount of data, this can take some time. Do you want to save this data on the Clipboard?@@19@@2” |
8516 | “You selected more records than can be copied onto the Clipboard at one time.@Divide the records into two or more groups, and then copy and paste one group at a time. The maximum number of records you can paste at one time is approximately 65,000.@@1@@1” |
8517 | Do you want to suppress further error messages telling you why records can't be deleted?@If you click No, a message will appear for every record that can't be deleted.@@13@@2 |
8518 | You won't be able to undo this Replace operation.@Do you want to continue?@@19@@2 |
8519 | “You are about to delete | record(s).@If you click Yes, you won't be able to undo this Delete operation. Are you sure you want to delete these records?@@19@@2” |
8520 | You are about to paste | record(s).@Are you sure you want to paste these records?@@19@@2 |
8521 | “You won't be able to undo this Delete operation.@The Undo command won't be available because this operation is too large, or there isn't enough free memory. Do you want to delete these items?@@19@@2” |
8522 | All timers are in use.@Set the TimerInterval property back to zero so that you can start another timer.@@2@606342@1 |
8523 | Do you want to delete the custom palette information from this form or report and revert to the default palette?@@@20@@2 |
8524 | Do you want to delete the graphic from this button?@@@20@@2 |
8525 | “The remote data isn't accessible.@You tried to open a form or report that includes a DDE or DDESend function in a calculated control that specifies an OLE server application. Do you want to start the application |?@@19@@2” |
8526 | Microsoft Access encountered a problem while trying to switch views and must close this window.@@@1@@1 |
8527 | Do you want to delete the group section for the database object '|' and its contents?@The group header or footer you want to delete contains controls and will be deleted along with the section.@@20@@2 |
8528 | Deleting these sections will also delete all controls in them.@Do you want to delete these sections anyway?@@20@@2 |
8529 | Do you want to delete the selected group level(s) and all associated sections and their controls?@The field or expression you're deleting from the Sorting and Grouping box has an associated section (a header or footer) containing controls that will be deleted along with the section.@@20@@2 |
8530 | Relationships that specify cascading deletes are about to cause | record(s) in this table and in related tables to be deleted.@Are you sure you want to delete these records?@@21@409096@2 |
8531 | The section width is greater than the page width, and there are no items in the additional space, so some pages may be blank.@For example, the report width may be wider than the page width.@@3@@1 |
8532 | Do you want to remove this picture from the form?@@@20@@2 |
8533 | Some data may not be displayed.@There is not enough horizontal space on the page for the number of columns and column spacing you specified.@Click Page Setup on the File menu, click the Layout tab, and then reduce the number of columns or the size of the columns.@3@@1 |
8534 | When you save this form or report, any code behind it will be deleted.@You have set the HasModule property to No, creating a form or report that opens more quickly. Any macros associated with this form or report will not be affected, nor will code in separate modules that is called from this property sheet.@Are you sure you want to do this?@20@@2 |
8538 | “You are about to delete this section. @If you click Yes, the controls you placed in this section will be deleted and you won't be able to undo this operation. Are you sure you want to delete these controls?@@20@@2” |
8539 | Relationships that specify cascading deletes are about to cause record(s) in this table and in related tables to be deleted.@Are you sure you want to delete these records?@@21@409096@2 |
8540 | “You are about to delete one or more records.@If you click Yes, you won't be able to undo this Delete operation. Are you sure you want to delete these records?@@19@@2” |
8541 | Microsoft Access Could not perform the delete operation.An error occurred during the delete operation, no records were deleted. |
8542 | Microsoft Access did not detect a relationship between the fields you have chosen. @Do you want a relationship to be created for you now?@@19@@3 |
8543 | “You are about to delete this section and all related sections. @If you click Yes, the controls you placed in these sections will be deleted and you won't be able to undo this operation. Are you sure you want to delete these controls?@@20@@2” |
8544 | You won't be able to undo this paste operation.@Do you want to continue?@@19@@2 |
8545 | Microsoft Access can't save the filter criteria you entered in the Insert Hyperlink dialog box. Make sure that the data access page is bound to a record source before you set the filter criteria. Also make sure that the criteria is in the form of a WHERE clause; for example, EmployeeID=[EmployeeID]. |
9502 | You won't be able to undo this operation.@Do you want to continue anyway?@@19@@2 |
9504 | The file '|' is not readable by JET. @If you think you have a valid JET file then this is most likely due to the recent file format change. Do you want to attempt to upgrade the database format?@@19@@2 |
9505 | “The database '|' needs to be repaired or isn't a database file.@You or another user may have unexpectedly quit Microsoft Access while a Microsoft Access database was open. Do you want Microsoft Access to attempt to repair the database?@@19@209010@2” |
9507 | Microsoft Access was unable to load all the library modules.@@@1@@1 |
9508 | “Microsoft Access couldn't close database '|.'@Your last change may not have been saved because an internal buffer was locked by another user (whose name was given in the previous message).
To avoid losing data, wait for the other user to finish using the record, and then click OK again. If you click Cancel, you may lose changes that haven't been saved.@@3@@2” |
9509 | You can't undo this command and, once it's completed, you won't be able to edit this object.@Do you want to continue anyway?@@19@@2 |
9510 | Microsoft Access can't open the file '|'.@@@1@@1 |
9511 | |@@@1@@1 |
9512 | Successfully repaired the '|' database.@@@1@@1 |
9513 | “Microsoft Access was unable to completely repair the '|' table and deleted some Memo, OLE Object, or Hyperlink field values.@To recover the data, restore from your backup copy of the database. Note that the data in the deleted field may have been damaged by a bad sector on your hard disk. For more information on checking your disk's surface, files, and folders for errors, search the Windows Help index for 'checking for errors, in disks'.@@1@@1” |
9514 | One or more records were unrecoverable and were deleted from the '|' table.@@@1@@1 |
9515 | The '|' table was truncated; data was lost.@@@1@@1 |
9516 | One or more indexes from the '|' table couldn't be repaired and were deleted.@@@1@@1 |
9517 | The Save As command can't process any subforms contained in your report.@Do you want to proceed anyway?@@19@@2 |
9518 | “An error occurred while adding this word to the custom dictionary.@
|
9519 | An error occurred while adding this word to the Change All list.@The dictionary may be full.@@1@@1 |
9520 | An error occurred while adding the word to the Ignore All list.@The dictionary may be full.@@1@@1 |
9521 | The specified word is too large.@Words can't exceed 64 characters.@@1@@1 |
9523 | Microsoft Access can't open the '|' custom dictionary.@@@1@@1 |
9524 | Microsoft Access can't start the spelling checker because it isn't installed.@@@1@@1 |
9525 | Microsoft Access can't open the main dictionary file.@Verify that this file has been correctly installed.@@1@@1 |
9526 | The spelling checker only works on text fields that contain text data.@You're trying to check a field with a data type other than Text or Memo.@@1@@1 |
9527 | The spelling checker can't proceed; you must first select data from a table, query, view, stored procedure, or form.@@@1@@1 |
9529 | The spelling checker can't proceed; form data is not updatable.@The form may be based on a query that isn't updatable or is only partly updatable. For information on when a query is updatable, click Help.@@2@409932@1 |
9530 | An error occurred while trying to modify the contents of field '|.'@The field may be locked or read-only, or you may not have permissions to change it. For information on security permissions and who can change them, click Help.@@2@410222@1 |
9531 | An error occurred while trying to save spelling preferences.@@@1@@1 |
9532 | The '|' field can't be modified because it's a read-only field.@@@1@@1 |
9533 | An error occurred while trying to add the word pair to the AutoCorrect list.@@@1@@1 |
9534 | The current selection does not contain any fields that can be checked for spelling errors.@You can check the spelling of text box controls with Text or Memo data types.@@1@@1 |
9535 | You entered an invalid main dictionary.@Please select a valid entry.@@1@@1 |
9536 | The spelling check is complete.@@@1@@1 |
9537 | You must restart the spelling checker for the dictionary change to take effect.@@@1@@1 |
9538 | The '|' custom dictionary doesn't exist.@Do you want to create it?@@20@@1 |
9539 | The Change To box contains a word that isn't found in the main or custom dictionary.@Do you want to use this word and continue checking?@@20@@1 |
9540 | The main dictionary you selected can't be used.@It has not been correctly installed.@@1@@1 |
9541 | The spelling checker can't undo your last change.@The data in field '|' has been modified by another user. To resume the spelling check, click OK.@@1@@1 |
9542 | “This database must be closed before you can create a replica.@Do you want Microsoft Access to close this database and create the replica? If you proceed, Microsoft Access will close your database and convert it to a Design Master. The database may increase in size.@@19@@2” |
9543 | The Hangul Hanja Converter can't proceed. There is no Hangul or Hanja data to convert.@@@1@@1 |
10000 | You must first save the table.@Do you want to save the table now?@@19@@1 |
10001 | You must first save the view.@Do you want to save the view now?@@19@@1 |
10002 | You must first save the stored procedure.@Do you want to save the stored procedure now?@@19@@1 |
10003 | You must first save the query.@Do you want to save the query now?@@19@@1 |
10004 | Do you want to permanently delete the selected field(s) and all the data in the field(s)?@To permanently delete the field(s), click Yes.@@19@@2 |
10005 | “There is no primary key defined.@Although a primary key isn't required, it's highly recommended. A table must have a primary key for you to define a relationship between this table and other tables in the database. Do you want to create a primary key now?@@13@@2” |
10006 | “Changing to this data type requires removal of one or more indexes.@You can't use indexes on fields with a Memo, OLE Object, or Hyperlink data type. If you click Yes, Microsoft Access will delete the indexes that include that field. Do you want to continue anyway?@@20@@2” |
10007 | Deleting field '|' requires Microsoft Access to delete the primary key.@ Do you want to delete this field anyway?@@19@@2 |
10008 | “Deleting field '|' requires Microsoft Access to delete one or more indexes.@If you click Yes, Microsoft Access will delete the field and all its indexes. Do you want to delete this field anyway?@@19@@2” |
10009 | “You can't open the table '|' for modification.@A query or form bound to the table is open, you may not have permission to open this table in Design view, or another user has the table open. Do you want to open this table as read-only?@If you have opened a query or form bound to this table, close it, and then try again to open the table in Design view.@19@@2” |
10010 | Table '|' is a linked table with some properties that can't be modified.@Do you want to open it anyway?@@19@@2 |
10011 | “Microsoft Access encountered errors while converting the data.@The contents of fields in |1 record(s) were deleted. Do you want to proceed anyway?@@19@@2” |
10012 | “Microsoft Access can't retrieve field properties from the system tables.@The database needs to be repaired. If you click Yes, Microsoft Access will open the table in Design view. The settings of the FieldName, DataType, FieldSize, Indexed, and Primary properties will remain intact, but the settings of other field properties will be lost.
You can attempt to redefine the lost properties, but it is recommended that you restore the database from a backup copy, or close it and use the Repair Database command on the Tools menu (Database Utilities submenu). Do you want to continue anyway?@@20@@2” |
10013 | Microsoft Access can't save property changes for linked tables.@Do you want to continue anyway?@@19@@2 |
10014 | “Microsoft Access was unable to append all the data to the table.@The contents of fields in |1 record(s) were deleted, and |2 record(s) were lost due to key violations.
If data was deleted, the data you pasted or imported doesn't match the field data types or the FieldSize property in the destination table. If records were lost, either the records you pasted contain primary key values that already exist in the destination table, or they violate referential integrity rules for a relationship defined between tables. Do you want to proceed anyway?@@22@600922@1” |
10015 | Changing to this data type requires removal of the primary key.@Do you want to continue anyway?@@19@@2 |
10016 | “Some data may be lost.@The setting for the FieldSize property of one or more fields has been changed to a shorter size. If data is lost, validation rules may be violated as a result. Do you want to continue anyway?@@20@@2” |
10017 | Your computer is out of disk space.@You won't be able to undo this paste append. Do you want to continue anyway?@@19@@2 |
10018 | “Microsoft Access was unable to append all the data to the table.@The contents of fields in |1 record(s) were deleted, and |2 record(s) were lost due to key violations.
If data was deleted, the data you pasted or imported doesn't match the field data types or the FieldSize property in the destination table. If records were lost, the records you pasted contain primary key values that already exist in the destination table, or they violate referential integrity rules for a relationship defined between tables.@@2@600922@1” |
10019 | “Microsoft Access can't find the database containing the linked table '|.'@The properties set in Microsoft Access for the linked table will be lost. Do you want to continue with the conversion anyway?@@19@@2” |
10020 | Data integrity rules have been changed; existing data may not be valid for the new rules.@This process may take a long time. Do you want the existing data to be tested with the new rules?@@13@@2 |
10021 | “Existing data violates the new record validation rule.@Do you want to keep testing with the new rule?
To keep the new rule and continue testing, click Yes. To revert to the old rule and continue testing, click No. To stop testing, click Cancel.@@13@@1” |
10022 | “Existing data violates the new setting for the '|1' property for field '|2.'@Do you want to keep testing with the new setting?
To keep the new setting and continue testing, click Yes. To revert to the old setting and continue testing, click No. To stop testing, click Cancel.@@13@@2” |
10023 | Microsoft Access deleted | indexes on the converted fields.@Some data did not convert properly.@@1@@1 |
10024 | “You must save the table first.@Microsoft Access can't test your data until you save the design changes you made. Do you want to save the table now?@@19@@2” |
10025 | “This operation will test the table's record and field validation rules, as well as the Required and AllowZeroLength properties, for all data in the table.@This process may take a long time. Do you want to continue anyway?@@19@@2” |
10026 | All data was valid for all rules.@@@1@@1 |
10027 | “Existing data violates the new record validation rule.@Do you want to continue testing data with this new rule?
To continue testing for other new rule violations, click Yes. To continue to test only the old validation rules, click No. To stop testing, click Cancel.@@13@@2” |
10028 | “The existing data violates the '|1' property for field '|2.'@If you continue testing, Microsoft Access will inform you if data violates any other property settings in the table. Would you like to continue testing?@@19@@2” |
10029 | “There is no primary key defined.@Although a primary key isn't required, it's highly recommended. A table must have a primary key for you to add data to this table or to define relationships between this table and other tables in the database. Do you want to return to table design and add a primary key now?@@13@@2” |
10250 | “You can't print the scrollable (unfrozen) columns on the datasheet.@The frozen columns are wider than the page. Do you want to print just the frozen columns?@If you want to print the unfrozen columns, try one or more of the following:
|
10251 | “The column heading is too tall to fit on the page. Part of the heading will be cut off.@Do you want to print the incomplete heading?@To prevent headings from being cut off, try one or more of the following:
|
10252 | “At least one column is too wide to fit on the page. Data in that column will be cut off.@Do you want to print the column with incomplete data?@To prevent data from being cut off, try one or more of the following:
|
10253 | “The row height exceeds the space between the top and bottom margins.@Do you want to print the columns with incomplete data?@To prevent data from being cut off, try one or more of the following:
|
10500 | “You are about to run an update query that will modify data in your table.@Are you sure you want to run this type of action query? For information on how to prevent this message from displaying every time you run an action query, click Help.@@21@209058@2” |
10501 | “You are about to run an append query that will modify data in your table.@Are you sure you want to run this type of action query? For information on turning off confirmation messages for document deletions, click Help.@@21@209058@2” |
10502 | “You are about to run a make-table query that will modify data in your table.@Are you sure you want to run this type of action query? For information on how to prevent this message from displaying every time you run an action query, click Help.@@21@209058@2” |
10503 | “You are about to run a delete query that will modify data in your table.@Are you sure you want to run this type of action query? For information on how to prevent this message from displaying every time you run an action query, click Help.@@21@209058@2” |
10504 | “You are about to run a data-definition query that may modify data in your table.@Are you sure you want to run this type of an SQL query? If not, click No and then modify the query or close it to run later.@@19@@2” |
10505 | “You are about to update | row(s).@Once you click Yes, you can't use the Undo command to reverse the changes. Are you sure you want to update these records?@@19@@2” |
10506 | “You are about to append | row(s).@Once you click Yes, you can't use the Undo command to reverse the changes. Are you sure you want to append the selected rows?@@19@@2” |
10507 | “You are about to paste | row(s) into a new table.@Once you click Yes, you can't use the Undo command to reverse the changes. Are you sure you want to create a new table with the selected records?@@19@@2” |
10508 | “You are about to delete | row(s) from the specified table.@Once you click Yes, you can't use the Undo command to reverse the changes. Are you sure you want to delete the selected records?@@19@@2” |
10509 | “Microsoft Access can't update all the records in the update query.@Microsoft Access didn't update |1 field(s) due to a type conversion failure, |2 record(s) due to key violations, |3 record(s) due to lock violations, and |4 record(s) due to validation rule violations.
Do you want to continue running this type of action query anyway? To ignore the error(s) and run the query, click Yes. For an explanation of the causes of the violations, click Help.@@21@310019@2” |
10510 | “Microsoft Access can't append all the records in the append query.@Microsoft Access set |1 field(s) to Null due to a type conversion failure, and it didn't add |2 record(s) to the table due to key violations, |3 record(s) due to lock violations, and |4 record(s) due to validation rule violations.
Do you want to run the action query anyway? To ignore the error(s) and run the query, click Yes. For an explanation of the causes of the violations, click Help.@@21@310020@2” |
10511 | “Microsoft Access can't add all the records in the update or append query.@It set |1 field(s) to Null due to a type conversion failure.
A type conversion failure is caused when the data in one or more fields doesn't match the DataType or FieldSize property in the destination table. For example, leaving blank fields in a Yes/No field or entering text in a numeric field will cause this error. Do you want to ignore the errors and run the update or append query anyway? To ignore the error(s) and run the query, click Yes.@@19@600922@2” |
10512 | “Microsoft Access can't delete |2 record(s) in the delete query due to key violations and |3 record(s) due to lock violations.@Do you want to run this action query anyway?
To ignore the error(s) and run the query, click Yes. For an explanation of the causes of the violations, click Help.@@21@310016@2” |
10513 | The existing | will be deleted before you run the query.@Do you want to continue anyway?@@20@@2 |
10514 | You won't be able to undo the changes this action query is about to make to the data in a linked table or tables.@Do you want to run this action query anyway?@@19@@2 |
10515 | “Microsoft Access was unable to update all the records in the update query.@Microsoft Access didn't update |1 field(s) due to a type conversion failure, |2 record(s) due to key violations, |3 record(s) due to lock violations, and |4 record(s) due to validation rule violations. For an explanation of the causes of the violations, click Help.@@2@310019@1” |
10516 | “Microsoft Access can't append all the records to the table.@Microsoft Access set |1 field(s) to Null due to a type conversion failure, and it didn't add |2 record(s) due to key violations, |3 record(s) due to lock violations, and |4 record(s) due to validation rule violations. For an explanation of the causes of the violations, click Help.@@2@310020@1” |
10517 | “Microsoft Access can't add all the records in the make-table query.@It set |1 field(s) to Null due to a type conversion failure. A type conversion failure is caused when the data in one or more fields doesn't match the DataType or FieldSize property in the destination table. For example, leaving blank fields in a Yes/No field or adding text in numeric field will cause this error.@@1@600922@1” |
10518 | “Microsoft Access can't delete all the records in the delete query.@Microsoft Access didn't delete |2 record(s) due to key violations and |3 record(s) due to lock violations. For an explanation of the causes of the violation, click Help.@@2@310016@1” |
10519 | “There isn't enough disk space or memory to undo the data changes this action query is about to make.@Do you want to run this action query anyway? For information on freeing disk space or freeing memory, search the Microsoft Windows Help index for 'disk space, freeing' or 'memory, troubleshooting'.@@19@@2” |
10520 | Do you want to save the changes made to the SQL statement and update the property?@The RecordSource or RowSource property contained an SQL statement when you invoked the Query Builder, so the original SQL statement was modified.@To close the Query Builder without changing the original SQL statement, click No.@13@604309@2 |
10521 | Do you want to save the changes made to the query and update the property?@The RecordSource or RowSource property contained the name of a query when you invoked the Query Builder, so the original query was modified.@To close the Query Builder without changing the original query, click No.@13@604309@2 |
10522 | You invoked the Query Builder on a table.@Do you want to create a query based on the table?@@19@@2 |
10523 | “You are about to run a pass-through query that may modify data in your table.@Are you sure you want to run this type of an SQL query? For information on how to prevent this message from displaying every time you run an SQL query, click Help.@@21@209058@2” |
10524 | | output column(s) in the query were unnamed and will not show any data.@@@1@@1 |
10600 | Are you sure you want to permanently delete the selected relationship from your database?@@@19@@2 |
10601 | A relationship already exists.@Do you want to edit the existing relationship? To create a new relationship, click No.@@13@@2 |
10602 | The field name is missing in row |.@You haven't selected a matching field for this relationship in each row of the grid.@Select fields so that the grid has the same number of fields on the left and right sides, and then try to create the relationship again.@1@@1 |
10603 | This relationship has been modified or deleted by another user since you opened the Relationships window.@Do you want to edit the relationship and overwrite the other user's changes? To update your Relationships window to include the other user's changes, click No.@@19@@2 |
10604 | This relationship has already been deleted by another user.@To update your view, click OK.@@1@@1 |
10605 | The layout of the Relationships window will be cleared.@Do you want to continue?@@19@@2 |
10606 | “You can't display queries or linked tables in the Relationships window for this database.@The database '|' was created in an earlier version of Microsoft Access. If you want to convert this database to the current version of Microsoft Access, use the Convert Database command on the Tools menu (Database Utilities submenu).@@1@@1” |
10607 | The relationship has been created as a one-to-many relationship because there are duplicate entries in the related field.@You've tried to create a one-to-one relationship, but the data in the tables suggests that a one-to-many relationship is more appropriate.@@2@411617@1 |
10608 | To create a relationship, use the mouse to drag a field from one table to another.@@@1@@1 |
10700 | This document was previously formatted for the printer |1 on |2, but that printer isn't available. Do you want to use the default printer |3 on |4?@@@19@@1 |
10701 | This document was previously formatted for the printer '|1 on |2', but that printer isn't available. The page settings shown in the Print Setup dialog box are for the current default printer '|3 on |4'.@Do you want to continue?@@19@@1 |
10750 | “You must save the macro before you run it.@Do you want to save the macro now?
To save the macro and then run it, click Yes. To return to the Macro window for this macro or to the window you executed the Run Macro command from, click No.@@19@@2” |
10751 | You are trying to save some actions which cannot perform in Microsoft Access97. These actions will be permanently deleted from the Access97 version of your macro.@@@1@@1 |
10800 | Microsoft Access finished adding the index '|.'@Add another index from the Select Index Files dialog box, or click Close.@@1@@1 |
10801 | “The Microsoft Access index information (.inf) file for '|' already exists.@Do you want to replace the existing Microsoft Access .inf file for the dBASE or Microsoft FoxPro file you're linking?@* To create a new .inf file, click Yes.
To use the existing file, click No. If the .inf file contains invalid or outdated information, you must click Yes to create a new .inf file before you can link the table.@17@209186@2” |
10803 | “The database object '|' already exists.@Do you want to replace the existing database object with the one you are exporting? If you want to export this object without replacing the existing database object, click No. You can then export the object again and rename it in the Export dialog box.@@20@@2” |
10804 | Not all of the import specifications could be imported due to name conflicts. Conflicts existed in | of the specifications.@Rename the conflicting import specifications, and try the import operation again.@@1@@1 |
10892 | “A form with a bound ActiveX control or an embedded object bound to a data source can't have its DefaultView property set to Continuous Forms.@You tried to add a bound ActiveX control to a form in Design view. Microsoft Access will reset the DefaultView property to Single Form.@@1@@1” |
10893 | You do not have write permission to this data access page. If you make any changes, you will have to save them to an alternate file. |
10894 | An unexpected error occurred while saving document properties to the data access page. |
10895 | You tried to drop an OLE or Long Binary column onto your data access page. There is no HTML control which binds correctly to this column type. |
10896 | You have chosen to delete the data access page.@Choose Yes to permanently delete the link and page file(s), No to delete just the link.@@17@@ |
10897 | |@There is a problem with Internet Explorer registry settings.@Please reinstall Internet Explorer.@1@@1 |
10898 | Microsoft Access data access pages can only be viewed in Microsoft Internet Explorer, but it is not your default Browser.@Do you want to open Internet Explorer to view this page?@@19@@ |
10899 | A link to this data access page could not be created because the Data and Misc. Objects are not checked out.@@@1@@1 |
10900 | The save operation was successful.@A folder was created for your supporting files at the save destination.@This directory had to be created because the server does not support long file names.@1@@1 |
10901 | You must save your data access page before you can preview it.@Do you want to save now?@@19@@ |
10902 | The save completed, but one or more of the supporting files are missing (i.e., image, sound, video files).@You may want to remove the HTML object(s) from this page.@@1@@1 |
10903 | The save completed, but files for the selected theme are missing.@Please apply a new theme to your data access page, and save again.@@1@@1 |
10950 | Are you sure you want to delete this account?@You can't undo the deletion of a user or group account. To restore a user or group account that has been deleted, you must recreate the account using the same name and personal identifier (PID).@@20@@2 |
10951 | “You don't have permission to modify '|.'@To modify this object, you must have Modify Design permission for it. If the object is a table, you must also have Delete Data and Update Data permissions for it. Do you want to save a copy of the object as a new object?@@21@410222@1” |
10952 | “You don't have permission to view this macro.@To view a macro, you must have Read Design permission for it. Do you want to continue to run the macro?@@21@410222@2” |
10953 | “You don't have permission to modify '|.'@To modify this object, you must have Modify Design permission for it. If the object is a table, you must also have Delete Data and Update Data permissions for it. Do you want to open it as read-only?@@21@410222@1” |
10954 | You changed the permissions of '|1' for '|2.'@Do you want to assign these permissions now?@@19@@2 |
10955 | “You don't have permission to open '|' for exclusive use.@Microsoft Access is opening the database for shared access. To open a database for exclusive access, you must have Open Exclusive permission for it. For more information on permissions and who can set them, click Help.@@2@410222@1” |
29000 | “There isn't enough memory to create an input area.@Close unneeded programs. Then try to create the input area again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@1” |
29001 | “Microsoft Access failed to save module '|.'@Your computer may be low on disk space. For information on freeing memory or disk space, search the Microsoft Windows Help index for 'memory, troubleshooting' or 'disk space, freeing'.@@1@@3” |
29002 | Microsoft Access failed to create the Visual Basic module '|.'@If your database is on a network drive, check your network connection, and then try again.@@1@@1 |
29003 | Microsoft Access failed to convert or enable your code modules.@Your computer may be low on disk space or memory.@@1@@1 |
29004 | The new procedure name you provided is invalid.@@@2@611738@1 |
29005 | The procedure '|' already exists.@Choose another procedure name.@@1@@1 |
29006 | “Microsoft Access failed to create a Debug window toolbar.@The system may be out of resource memory.@Close unneeded programs and try again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@1@@1” |
29007 | During the paste or import operation, Microsoft Access failed to convert the '|' module from an earlier version of a Microsoft Access database.@Your computer may be low on disk space or memory.@@1@@1 |
29008 | Microsoft Access couldn't create storage space for a Visual Basic module.@If your database is on a network drive, check your network connection, and then try again.@@1@@3 |
29009 | “Microsoft Access couldn't open the storage space for a Visual Basic module.@Your computer may be low on disk space. For information on freeing memory or disk space, search the Microsoft Windows Help index for 'memory, troubleshooting' or 'disk space, freeing'.@@1@@3” |
29010 | The function name is too long.@Microsoft Access will truncate the function name to 255 characters.@@1@411738@1 |
29011 | “Microsoft Access failed to save the database.@Your computer may be low on disk space. For information on freeing memory or disk space, search the Microsoft Windows Help index for 'memory, troubleshooting' or 'disk space, freeing'.@@1@@3” |
29012 | Microsoft Access failed to save the database information; database references may be lost.@@@1@@1 |
29013 | “This action will reset the current code in break mode.@Do you want to stop the running code?@
To halt the execution of the program so the Module window can be closed, select Yes. To leave the code in the current state, select No.@20@@1” |
29014 | You can't add a reference to a Microsoft Access workgroup.@@@2@613780@1 |
29015 | You can't remove this reference.@Microsoft Access needs this reference in order to work properly.@@1@@1 |
29016 | You can't add a reference to the open database.@@@1@@1 |
29017 | The database | was created in an earlier version of Microsoft Access.@Convert this database to the current version of Microsoft Access by using the Convert Database command on the Tools menu (Database Utilities submenu).@@1@@1 |
29018 | You can't use a standard module for this operation.@@@1@@1 |
29019 | “The module name '|' is invalid.@* The module name may start with the prefix Form_ or Report_.
|
29020 | Another user has modified this database.@To see the current version, close the database and open it again.@@1@@1 |
29021 | This operation isn't available while there is a module in break mode.@Reset the executing code and try the operation again.@@1@@1 |
29022 | “There were compilation errors during the conversion or enabling of this database.@The database has not been saved in a compiled state. The performance of this database will be impaired because Microsoft Access will need to recompile the database for each session. For information on improving performance, click Help.@@2@611705@1” |
29023 | There are calls to 16-bit dynamic-link libraries (.dll) in modules in this database.@These won't work under Microsoft Windows 95 or Microsoft Windows NT.@Change your code to call equivalent 32-bit dynamic-link libraries (.dll).@2@611961@1 |
29024 | “The current user account doesn't have permission to convert or enable this database.@To convert or enable a database, ensure the following:
|
29025 | There are calls to 16-bit dynamic-link libraries (.dll) in modules in this database.@These won't work under Microsoft Windows 95 or Microsoft Windows NT.@Translate these calls to equivalent 32-bit dynamic-link libraries.@2@611961@ |
29026 | “The database that you are trying to open or convert is currently in use, or you do not have permission to open it exclusively.@When you convert a database, or the first time you open an earlier version database, another user can't have the database open.@Try one of the following:
|
29027 | “Microsoft Access was unable to save the project.@Another user is saving the project now. Do you want to retry?@@23@@1” |
29028 | The Save operation failed.@@@1@@1 |
29029 | “You are trying to open a read-only database.@The first time you open an earlier version database, you must be able to write changes to the database.
|
29030 | Microsoft Access can't establish a reference to the specified database.@The referenced database can't be found, or it's locked exclusively by another user so it can't be opened.@Restore the referenced database from a backup copy or ask the user that has the database locked to open the database in nonexclusive mode.@1@@1 |
29031 | Microsoft Access can't create or open the requested database now.@The database may be locked exclusively by another user.@@1@@1 |
29032 | The '|' module is open; Microsoft Access can't set the permissions on an open module.@@@1@@1 |
29033 | Microsoft Access can't add references to a replicated database; changes will be ignored.@@@1@@1 |
29034 | Microsoft Access is unable to import the module from the source replica.@Synchronize the source database.@@1@@1 |
29040 | Microsoft Access is currently unable to rename the form, report, or module to '|'.@Close the database, reopen it, and then try the rename operation again.@@1@@1 |
29041 | One or more forms or reports contains an ActiveX control that could not be loaded.@These controls will not function properly until you register them, open the forms or reports in Design view, and save the forms or reports.@@1@@1 |
29042 | One or more forms or reports contains an ActiveX control that could not be loaded.@These controls will not function properly until you register them, open the forms or reports in Design view, and save the forms or reports.@@1@@1 |
29043 | “Microsoft Access has converted the code in '|' to your current version of Visual Basic.@To improve the performance of this database, do the following:
|
29044 | DAO version 3.0 is not compatible with this version of Microsoft Access.@Create a reference to DAO version 3.5. For information on setting references, click Help.@@2@613780@1 |
29045 | You can't import, export, create, modify, or rename any forms, reports, pages or modules in an MDE database.@@@1@@1 |
29046 | You can't create a module for a form or report if it is read-only, or if the database is read-only.@@@1@@1 |
29047 | Microsoft Access was unable to open the Visual Basic project for this database.@Another user is saving the project now. Do you want to retry?@@23@@1 |
29048 | MDE databases can't reference MDB databases.@MDE databases can only reference other MDE databases or type libraries.@@1@@1 |
29049 | You can't refer to a form or report module from Form view or Report preview if the form's or report's HasModule property is set to No.@Switch to Design view or set the HasModule property to Yes in order to refer to the module.@@1@@1 |
29050 | Microsoft Access couldn't compile this database because one or more references couldn't be resolved.@The database has not been saved in a compiled state. The performance of this database will be slower because Microsoft Access will need to recompile the database for each session.@For information on improving performance, click Help.@2@611705@1 |
29051 | “The current user account doesn't have permission to make an MDE file from this database.@To make an MDE file, do the following:
|
29052 | The Visual Basic for Applications project in the database '|' can't be converted to the current Visual Basic format.@If the database is an MDE, you will need to rebuild the MDE from the source MDB. If you don't have the source MDB, you will need to obtain a new version of the MDE that is compatible with the current version of Visual Basic.@@1@@1 |
29053 | Microsoft Access can't create any more controls on this form or report.@If you have deleted controls from this form or report in the past, you may be able to rename the form or report and then add more controls to it.@@1@@1 |
29054 | Microsoft Access can't add, rename, or delete the control(s) you requested.@@@1@@1 |
29055 | The form or report '|' has too many controls.@Reduce the number of controls on the form or report before using it in this version of Microsoft Access.@@1@@1 |
29056 | Someone else is using '|' and the Visual Basic for Applications project does not match your version of Visual Basic.@You need to open the database exclusively in order to upgrade the Visual Basic for Applications project in this database.@@1@@1 |
29057 | The database '|' is read-only and the Visual Basic for Applications project does not match your version of Visual Basic.@You need to open the database read-write in order to upgrade the Visual Basic for Applications project in this database.@@1@@1 |
29058 | You can't create a module for a form or report while an instance of the form or report is in browse mode.@@@1@@1 |
29059 | Microsoft Access was unable do display the module.@@@1@@1 |
29060 | File not found.@@@1@@1 |
29061 | “There were compilation errors during the conversion or enabling of this database.@This might be due to old DAO syntax that is no longer supported. For an example on how to fixup the code, click Help. @@2@611705@1” |
29062 | The module name '|' is misspelled or refers to a module that doesn't exist.@If the invalid module name is in a macro, an Action Failed dialog box will display the macro name and the macro's arguments after you click OK. Open the Macro window, and enter the correct module name.@@1@@1 |
29063 | The Visual Basic for Applications project in the database is corrupt. |
29064 | You do not have exclusive access to the database at this time. If you proceed to make changes, you may not be able to save them later. |
29065 | You do not have exclusive access to the database at this time. Your design changes will not be saved. |
29066 | You do not have exclusive access to the database. Your design changes cannot be saved at this time. Do you want to close without saving your changes? |
29067 | You do not have exclusive access to the database. You cannot convert this database at this time. |
29068 | Microsoft Access cannot complete this operation. You must stop the code and try again. |
30000 | Microsoft Access could not find the SQL Server specified. Verify that the server name is correct. |
30001 | Microsoft Access could not find the database on the server. Verify that the database name is correct. |
30002 | Microsoft Access could not log on to the server. Verify that the log on information is correct. |
30004 | The Default Max Records setting must be between 0 and 2147483647. |
30005 | Missing SQL command |
30006 | Access was not able to perform this operation because the project is not connected to a SQL Server database. |
30007 | Cannot Sort on one or more fields specified in the OrderBy property or the Sorting/Grouping dialog. |
30008 | The server you are trying to access is case sensitive. Objects of the same name but of different case are not supported. Using these objects may result in a loss of data. |
30009 | Another user or application has deleted this record or changed the value of its primary key. |
30010 | Cannot apply Filter on one or more fields specified in the Filter property. |
30011 | Cannot get column information for the database object being browsed. |
30012 | A Server Filter cannot be applied to a stored procedure Record Source. Filter not applied. |
30013 | You can't update the record because another user or application deleted it or changed the value of its primary key. |
30014 | The data was added to the database but the data won't be displayed in the form because it doesn't satisfy the criteria in the underlying record source. |
30015 | The specified record source contains duplicate names for some output fields. Use aliases in your SELECT statement to give each field a unique name. |
30016 | The field '|' is read only. |
30017 | This database is not enabled for publication. |
30018 | Cannot create objects of type '|' against current SQL backend. Please check your permissions and server setup. |
30019 | Microsoft Access cannot copy a table with a name that is longer than 64 characters. |
30020 | Cannot find column '|'. |
30021 | Cannot use domain functions on stored procedures. |
30022 | The Access project could not be opened. You may not have adequate permissions, or the project may be read-only. |
31000 | You must specify criteria for all conditional formats.@@@1@@1 |
31001 | A conditional format expression can't be longer than 946 characters.@@@1@@1 |
31002 | Microsoft Access can't modify the control's conditional formats right now.@Your program tried to modify the conditional format of a control while the conditional format was being evaulated.@@1@@1 |
31500 | Microsoft Access can't send this format in a mail message.@To send this format in a mail message, click Save As/Export on the File menu, or use the OutputTo method to create the files and attach them to a mail message.@@1@@1 |
31501 | Microsoft Access can't find the dynamic-link library (DLL) Mso97rt.@You can't use the /runtime command-line switch unless you have installed Microsoft Office 97 Developer Edition Tools.@@1@@3 |
31502 | Microsoft Access can't find the Microsoft Office international dynamic-link library (DLL).@Reinstall Microsoft Office 97, Developer Edition.@@1@@3 |
31507 | Invalid field data type. |
18.118.93.64